AD704AR-16 - Quad Picoamp Input Bipolar Op Amp | Analog Devices
MPN: AD704AR-16 ✓ NakahandaAD704AR-16 Ulas
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The AD704 belongs to the precision-amplifier hierarchy, using bipolar input transistors rather than conventional junction-field-effect transistors. Its superbeta bipolar input stage provides picoampere input bias current at room temperature while maintaining better bias-current temperature stability than a typical BiFET input amplifier.
The AD704AR-16 provides four amplifiers in one 16-lead SOIC, reducing external component count in multi-channel sensor, measurement, and current-to-voltage circuits. Its 800 kHz gain-bandwidth product supports precision signal processing at moderate frequencies, while low power consumption of approximately 1.5 mA per amplifier suits battery-operated instrumentation and portable measurement systems.
The superbeta input architecture also limits input bias-current drift as temperature rises. Analog Devices states that the AD704 input bias current typically increases by only about five times at 125°C, a characteristic that helps preserve measurement accuracy in elevated-temperature industrial environments. Because a low bias current alone does not guarantee good accuracy, the circuit must still account for input offset voltage, offset drift, noise, common-mode range, and output-current capability.
Typical uses include pH and electrochemical sensor amplifiers, photodiode and optical measurement front ends, high-impedance transducers, precision current-to-voltage converters, and four-channel acquisition circuits. Each amplifier requires correct bypassing, stable feedback compensation, and an output stage that remains within its linear operating region during startup and overload conditions.
When laying out a sensitive measurement board, keep the input traces short, use guarding techniques for high-impedance nodes, and connect the power-supply pins to a low-impedance ground plane. For replacement work, verify the amplifier's temperature grade, supply range, offset-voltage behavior, unity-gain stability, and exact 16-lead pin arrangement before substituting a different quad amplifier.
This product page combines the manufacturer specifications, package information, sourcing details, functional comparisons, and practical design guidance to support component selection, PCB reuse, and qualification of the AD704AR-16 in precision analog systems.
Mga alternatibo na pwedeng ilagay na AD704AR-16 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok AD704AR-16 (parehas na form factor at footprint) — pagkakaiba sa Amplifier Type, Number of Amplifiers, Package.
AD704JR-16
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AD704BR-16
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD704CR-16
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
AD704AR-32
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
OP497FSZ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD704AR-16 Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | Quad precision operational amplifier |
| Number of Amplifiers | 4 |
| Topolohiya | Low-power bipolar precision op amp |
| Input Transistor Architecture | Superbeta bipolar input transistors |
| Typical Input Bias Current | Picoampere level at room temperature |
| Input Bias Current Temperature Behavior | Typically increases by 5x at 125°C |
| Gain-Bandwidth Product | 800 kHz |
| Kuru-kuryente ng Pagbibigay | Approximately 1.5 mA per amplifier |
| Power Class | Low power |
| Packhaging | 16-lead SOIC |
| Bilang ng Pin | 16 |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng AD704AR-16 16-lead soic
Pin configuration para sa AD704AR-16 (16-lead soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD704AR-16.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD704AR-16 ay nararapat para sa 6 aplikasyons: High-Impedance Sensor Front Ends, Photodiode Signal Conditioning, Precision Current-to-Voltage Conversion, Four-Channel Instrumentation Acquisition, Battery-Powered Portable Measurement, Precision Bridge and Strain-Gauge Readouts.
High-Impedance Sensor Front Ends
The AD704AR-16 fits electrochemical, pH, and resistive sensor interfaces because its superbeta bipolar input stage provides picoampere-class bias current at room temperature and typically only a fivefold increase at 125°C. Four amplifiers can process four sensor channels in one 16-lead SOIC, reducing board area. Keep sensor traces short, guard the input nodes, and verify that input bias current times source impedance remains below the required measurement error. The 800 kHz gain-bandwidth product supports low-frequency sensor signals, while approximately 1.5 mA per amplifier limits power consumption in portable instruments.
Inirekomenda
Photodiode Signal Conditioning
The AD704AR-16 is suitable for transimpedance photodiode amplifiers when the photodiode capacitance is modest and the required signal bandwidth is below the amplifier's 800 kHz gain-bandwidth product. Picoampere-class input bias current reduces the DC error generated across the feedback resistor, and the superbeta bipolar stage limits bias-current drift with temperature. Use low-value feedback resistors for wideband photodiode nodes and account for input capacitance when selecting the compensation network. The quad package can also combine photodiode, temperature, and reference-buffer channels.
Inirekomenda
Precision Current-to-Voltage Conversion
The AD704AR-16 can convert small currents from sensors, photoresistors, or electrochemical cells into measurable voltages while introducing less bias-current error than a conventional bipolar input stage. Its approximately 1.5 mA per-amplifier supply current makes it appropriate for portable and bench instrumentation, and its low temperature drift helps preserve accuracy in changing environments. The design must still account for the transimpedance resistor's thermal noise, input bias current flowing through that resistor, and the amplifier's input offset voltage. Stable reference and guard techniques improve end-to-end measurement quality.
Inirekomenda
Four-Channel Instrumentation Acquisition
A single AD704AR-16 package can condition four low-level analog inputs, making it useful for compact multi-channel measurement boards. Each amplifier combines picoampere-class input bias current with low power consumption of approximately 1.5 mA, while the 800 kHz gain-bandwidth product covers many pressure, temperature, strain, and process-control signals. Place bypass capacitors beside the supply pins and route each sensitive input away from digital and switching traces. Verify common-mode range and output swing at the actual signal level, especially during startup when sensors may present voltages outside the steady-state operating range.
Inirekomenda
Battery-Powered Portable Measurement
The AD704AR-16 suits battery-powered instruments because its approximately 1.5 mA per-amplifier operating current limits supply demand while retaining picoampere-class input bias current. Four precision channels fit into one 16-lead SOIC, allowing a compact analog front end in handheld analyzers, environmental monitors, and field meters. The superbeta bipolar input stage also limits bias-current growth at elevated temperature, which matters when the enclosure warms during operation. Validate the total board sleep current, regulator efficiency, and analog settling behavior rather than evaluating the amplifier alone.
Inirekomenda
Precision Bridge and Strain-Gauge Readouts
The AD704AR-16 can amplify outputs from resistive bridges and strain gauges where source impedance is high and drift directly affects measurement accuracy. Picoampere-class input bias current reduces excitation error, while controlled bias-current temperature behavior helps preserve bridge balance over changing conditions. The 800 kHz gain-bandwidth product is adequate for many quasi-static and low-frequency mechanical measurements. Use matched resistors, low-drift reference components, careful grounding, and guarded sensor connections. Offset voltage and offset drift must be checked against the resolution required by the mechanical test system.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD704AR-16 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AD704JR-16 | AD704BR-16 | AD704CR-16 | AD704AR-32 | OP497FSZ |
|---|---|---|---|---|---|---|
| Package | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Count | 4 | 4 | 4 | 4 | 4 | 4 |
| Primary Function | Precision low-bias-current amplifier | Precision low-bias-current amplifier | Precision low-bias-current amplifier | Precision low-bias-current amplifier | Precision amplifier | Precision amplifier |
Pangunahing mga Pagkakaiba
- Picoampere-class room-temperature input bias current with controlled temperature behavior (kumpara saOP497FSZ)
- Low-power operation in a four-channel package (kumpara saAD704JR-16)
- Superbeta bipolar input architecture (kumpara saOP497FSZ)
- Four precision channels in a compact standard footprint (kumpara saLM2904M/NOPB)
Talaan ng Disenyo
Connect the AD704AR-16 bypass capacitor directly between the supply and ground pins, and place it on the same side of the board as the device. Keep input and feedback traces short and route them away from switching-regulator and digital clock traces. High-impedance input nodes should be guarded with a resistor connected to a low-impedance bias or ground point where circuit polarity permits. These measures reduce leakage pickup and parasitic capacitance that are especially significant when the source impedance is high.
Do not select a replacement solely by matching the amplifier count and SOIC lead count. Verify the exact pin mapping, supply range, input common-mode range, output swing, offset voltage, offset drift, input bias current, unity-gain stability, and temperature grade. The AD704AR-16 emphasizes picoampere-class input bias current, so a generic quad amplifier can create a major error at the same source impedance even when its headline bandwidth specification appears suitable.
For a transimpedance design, calculate the feedback network around the actual photodiode or sensor capacitance rather than relying only on the nominal 800 kHz gain-bandwidth product. A feedback resistor that is too large combined with input capacitance can reduce bandwidth and stability margin. Check settling behavior, output saturation during startup, and bias-current-generated DC error. Precision measurements also benefit from low-drift resistors and a clean analog ground connection.
The AD704AR-16 is a low-power device, but precision accuracy still depends on temperature gradients rather than total package power alone. Keep sensitive feedback resistors and sensor connectors away from regulators, processors, and other heat sources. Use the device's specified bias-current temperature behavior as part of the error budget, and include input offset-voltage drift and sensor drift when estimating measurement uncertainty over the complete operating range.
Impormasyon ng Pagsunod sa Kautusan
The AD704 is a conventional analog precision amplifier, and no automotive qualification is indicated for the AD704AR-16 ordering code. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or a certification statement.