Analog Devices

AD977AANZ - 16-Bit 200 kSPS SAR ADC | Analog Devices

MPN: AD977AANZ ✗ Cuối đời
5 V Vdss 20-pin PDIP, 0.300 in (7.62 mm) pitch Package
MOQ: 1 |

AD977AANZ Tóm tắt

The Analog Devices AD977AANZ is a 16-bit, single-input successive-approximation analog-to-digital converter with a throughput rate of 200 kSPS. It operates from a single 5 V supply and is packaged in a 20-pin PDIP. The converter includes a switched-capacitor sampling architecture, an internal 2.5 V reference, a high-speed serial interface, and factory calibration designed to minimize offset, gain, and nonlinearity errors.

A successive-approximation register, or SAR, ADC is a type of analog-to-digital converter that compares the sampled input voltage against a series of internal trial voltages. The SAR architecture combines moderate conversion speed with relatively low power, making it appropriate for precision industrial measurement, control, instrumentation, and signal-acquisition systems where a 200 kSPS sampling rate is sufficient.

The AD977AANZ provides 16-bit nominal resolution, one analog input, and a 200 kSPS throughput rate. Its single 5 V supply simplifies system power design, while the internal 2.5 V reference supports standalone operation when an external precision reference is not required. The serial interface reduces the number of package pins needed for data transfer and is suitable for connecting the converter to a microcontroller, DSP, FPGA, or other digital acquisition controller.

Factory calibration is an important technical feature because it reduces the need for board-level offset and gain correction. The converter remains a sampled-data system, so front-end settling time, source impedance, input filtering, reference stability, and digital clock quality influence the usable accuracy. Designers should therefore treat the analog input and reference paths as precision signal paths rather than ordinary utility connections.

Typical uses include industrial process-control loops, multichannel measurement systems when several AD977AANZ devices are combined, factory automation equipment, laboratory instrumentation, data acquisition, and embedded control products. The 200 kSPS rate supports rapidly changing process variables while keeping power and implementation complexity below high-speed flash-converter designs.

The primary design tradeoff is conversion throughput versus resolution and implementation complexity. AD977AANZ provides more usable resolution and simpler integration than many lower-rate converters, but it cannot match the multi-megahertz sampling rates of modern flash ADCs. Validate the source impedance, acquisition time, reference arrangement, digital interface timing, and thermal conditions before fixing the production design.

This page combines the manufacturer specifications, package and interface details, verified drop-in options, and practical implementation guidance needed to evaluate the AD977AANZ for precision data-acquisition and industrial-control designs.

Bộ thay thế dễ dàng lắp đặt cho AD977AANZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD977AANZ (cùng hình factor và footprint) — khác nhau ở Package, Supply Voltage, Throughput Rate, Internal Reference, Power-Down Mode.

Analog Devices
Package: 20-pin through-hole DIP
Supply Voltage: 5 V single supply
So sánh với AD977AANZ →
Analog Devices
Package: 20-pin PDIP
Supply Voltage: 5 V single supply
Throughput Rate: 100 kSPS
So sánh với AD977AANZ →
Analog Devices
Package: 20-pin PDIP, 7.62 mm width
Supply Voltage: 5 V single supply
So sánh với AD977AANZ →
Analog Devices
Package: 20-pin PDIP
So sánh với AD977AANZ →
Analog Devices
Package: 20-pin PDIP
Throughput Rate: 100 kSPS
So sánh với AD977AANZ →

AD977ABNZ

✅ Drop-In
Analog Devices
📦 20-pin PDIP
16 bit · 200 kSPS · Successive approximation, switched capacitor · 1 input · 5 V single supply · 100 mW · Serial, SPI · 2.5 V

Liên hệ để biết giá

Xem tài liệu →

AD977ABN

✅ Drop-In
Analog Devices
📦 20-pin PDIP
Successive-approximation ADC · 16 bit · 100 kSPS · Single-ended · BiCMOS switched-capacitor ADC · 5 V single supply · 100 mW maximum · 50 W

Liên hệ để biết giá

Xem tài liệu →

AD977AANZ Tỷ lệ tối đa & tính chất điện

Converter Type Successive-approximation ADC
Độ phân giải 16 bit
Number of Input Channels 1 channel
Throughput Rate 200 kSPS
Điện áp cung cấp 5 V
Internal Reference 2.5 V
External Reference Support Supported
Sampling Architecture Switched-capacitor SAR
Data Interface Serial, SPI-compatible
Hộp 20-pin PDIP, 0.300 in (7.62 mm) pitch
Packaging Tube
Nhiệt độ hoạt động -40°C to +85°C
Factory Calibration Yes
Power-Down Mode Supported

Hướng dẫn cấu hình chân AD977AANZ 20-pin pdip, 0.300 in (7.62 mm) pitch

Cấu hình chân cho AD977AANZ (20-pin pdip, 0.300 in (7.62 mm) pitch gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 20-pin pdip, 0.300 in (7.62 mm) pitch cho AD977AANZ

Không có dữ liệu chân cụ thể sẵn có cho AD977AANZ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD977AANZ phù hợp cho 6 Áp dụngs: Industrial Process Measurement, Factory Automation Control, Laboratory Data Acquisition, Embedded Sensor Interface, Power and Energy Monitoring, Precision Control and Monitoring.

🏭

Industrial Process Measurement

The AD977AANZ fits process-control designs that require 16-bit nominal resolution and a 200 kSPS sampling rate from a single 5 V supply. It can acquire a conditioned sensor signal while the switched-capacitor SAR architecture limits power relative to many high-speed flash converters. Its factory calibration reduces the need for board-level offset and gain correction. The practical design limit is the converter’s acquisition behavior: source impedance, input RC filtering, settling time, and reference noise must be characterized so that the complete signal chain preserves the intended measurement accuracy.

🏭

Factory Automation Control

AD977AANZ is suitable for factory automation modules that inspect position, pressure, level, or other slowly changing analog quantities while maintaining a compact acquisition channel. The 200 kSPS rate provides more temporal headroom than the 100 kSPS AD977ANZ, while single 5 V operation simplifies embedded controller power planning. Place input filtering close to the converter, maintain a low-impedance drive path, and account for relay or sensor excitation transients before sampling. The serial interface also reduces the number of traces required between the analog front end and a microcontroller or FPGA.

📟

Laboratory Data Acquisition

The AD977AANZ can form the analog input stage of a laboratory data-acquisition instrument requiring 16-bit nominal resolution and 200 kSPS acquisition. A serial controller can request conversions and transfer results through the compact interface, leaving more board area for input conditioning and isolation. Because this is a switched-capacitor SAR ADC, the source must settle before each conversion. Use a properly designed reference network, shielded analog routing, and calibrated excitation to prevent the instrument’s accuracy from being limited by the sensor interface rather than the converter.

🧩

Embedded Sensor Interface

AD977AANZ is appropriate for embedded sensing systems that digitize a conditioned analog sensor output at up to 200 kSPS. The single 5 V supply can align with many digital control systems, and the internal 2.5 V reference reduces the component count when reference accuracy is adequate. A microcontroller or FPGA can handle serial conversion control and data transfer. Designers should evaluate whether the sensor output can drive the sampling network without excessive settling errors, and should place the analog input path away from switching nodes and high-current return paths to preserve measurement repeatability.

⚡

Power and Energy Monitoring

The AD977AANZ can digitize conditioned voltage or current signals in power-monitoring equipment when 200 kSPS is sufficient for the measured bandwidth. Its 16-bit nominal resolution is useful for representing small changes around a full-scale value, and the low-power SAR architecture supports multi-channel monitoring boards. Each channel still requires isolated or appropriately scaled front-end circuitry. The internal reference simplifies basic designs, while external-reference operation should be considered when calibration drift, common-mode behavior, or sharing a precision reference across several converters is important.

🔧

Precision Control and Monitoring

AD977AANZ is suitable for precision feedback and supervisory monitoring circuits that require deterministic sampling without the complexity of a high-speed flash converter. A 200 kSPS conversion rate can capture dynamic events while single 5 V operation and factory calibration simplify system integration. For closed-loop control, verify acquisition time and control-loop latency rather than using throughput as the complete timing budget. The serial interface timing, reference settling, and external conditioning delays determine the usable update rate, so those paths should be validated together in the final controller board.

What is the AD977AANZ?
The AD977AANZ is a 16-bit, single-input, successive-approximation ADC from Analog Devices. According to the Analog Devices AD977/AD977A manufacturer datasheet, it operates from a single 5 V supply, supports a 200 kSPS throughput rate, and uses a serial interface. The device is packaged in a 20-pin PDIP for through-hole PCB installation.
What is the sampling rate of the AD977AANZ?
The AD977AANZ has a throughput rate of 200 kSPS. The Analog Devices AD977/AD977A manufacturer datasheet distinguishes it from the AD977, which operates at 100 kSPS. The 200 kSPS rate allows the AD977AANZ to sample rapidly changing analog inputs while retaining the relatively low-power behavior of a switched-capacitor SAR architecture.
What is the resolution and power supply of AD977AANZ?
The AD977AANZ provides 16-bit nominal resolution and operates from a single 5 V supply. The Analog Devices AD977/AD977A manufacturer datasheet also identifies a 2.5 V internal reference, an external-reference option, and a high-speed serial interface. These characteristics make it suitable for precision acquisition circuits that need one supply rail and straightforward digital connection.
Where can I download the AD977AANZ datasheet PDF?
The official AD977AANZ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ad977_977a.pdf. The document covers the AD977 and AD977A family, including the 16-bit SAR architecture, single 5 V operation, internal 2.5 V reference, analog input section, serial interface, and package information.
What is the AD977AANZ pinout?
The AD977AANZ is a 20-pin PDIP device, but the complete numbered pin list is not reproduced on this page. Use the pin-description table and package drawing in the official Analog Devices AD977/AD977A manufacturer datasheet before assigning PCB nets. This prevents errors when connecting the analog input, reference terminals, serial interface, power, and ground pins.
Can AD977AANZ operate with an external reference?
Yes, the AD977AANZ can operate with either its internal 2.5 V reference or an external reference. The Analog Devices AD977/AD977A manufacturer datasheet describes the analog input range in terms of the reference voltage, so changing the reference also changes the represented input span. Reference stability, noise, and settling must therefore be evaluated together with the analog input accuracy requirements.
What interface does the AD977AANZ use?
The AD977AANZ uses a high-speed serial interface identified as SPI-compatible in the product specification. The Analog Devices AD977/AD977A manufacturer datasheet describes the digital transfer method and associated timing. The serial interface conserves package pins and suits connection to a microcontroller, DSP, FPGA, or dedicated acquisition controller.
Where can I buy AD977AANZ and check current availability?
Use the Request a Quote form on this page to ask about AD977AANZ availability, current lead time, and order quantities. The AD977AANZ is a legacy 20-pin PDIP converter, so current channel availability may vary. The form lets you request the exact MPN, AD977AANZ, without substituting a different package or temperature grade.
What is the price of AD977AANZ?
The current commercial terms for AD977AANZ should be requested through the Request a Quote form on this page. Because this is a legacy converter in a 20-pin PDIP package, pricing and availability can depend on lot continuity, quantity, and remaining inventory. Use the form to obtain current terms for the exact AD977AANZ ordering code.
What is the lead time for AD977AANZ?
Request the current AD977AANZ lead time and minimum order quantity through the Request a Quote form on this page. Lead time depends on current manufacturer or channel inventory, which can change for legacy plastic-DIP converters. Quote requests should identify AD977AANZ, the required quantity, and the intended delivery location.
Is AD977AANZ currently in stock?
Current AD977AANZ stock status should be confirmed with the Request a Quote form on this page. The device is an older 16-bit, 200 kSPS converter in a 20-pin PDIP package, so availability may be intermittent rather than continuously stocked. The form is the appropriate route for confirming allocation and shipment timing for the exact MPN.
AD977AANZ vs AD977ABNZ - which is the better drop-in replacement?
The AD977ABNZ is the closest verified drop-in candidate for the AD977AANZ because both are described as 20-pin DIP converters with matching 16-bit, 200 kSPS SAR architecture and 5 V operation. The relevant distinction is device grade rather than conversion resolution or throughput. Use the official AD977/AD977A datasheet to confirm temperature grade and ordering-code details before substitution.
When should I choose AD977AANZ instead of AD977ANZ?
Choose the AD977AANZ over the AD977ANZ when the design requires a throughput rate of 200 kSPS rather than 100 kSPS. Both belong to the same Analog Devices family and use the same successive-approximation architecture and single 5 V supply, but the AD977AANZ provides twice the listed throughput of the AD977ANZ. The higher rate benefits dynamic process measurements.
Is AD977AANZ suitable for industrial process control?
The AD977AANZ is suitable for industrial process-control applications that require 16-bit nominal resolution, 200 kSPS sampling, and single 5 V operation. The Analog Devices AD977/AD977A manufacturer datasheet supports its use as a low-power precision converter. A practical design must also account for sensor settling, input filtering, electrical noise, isolation, and calibrated measurement accuracy.
What can replace the AD977AANZ?
The AD977ABNZ and AD977ABN are the verified same-brand drop-in candidates identified for the AD977AANZ. They retain the 20-pin DIP format, 16-bit resolution, 200 kSPS throughput, SAR architecture, and 5 V supply arrangement. No pin-compatible cross-brand replacement was established, so engineers should not assume that a converter with similar resolution can replace AD977AANZ without a complete interface and timing review.
What are the key specifications engineers should know about AD977AANZ?
The AD977AANZ is a 16-bit, one-input SAR ADC with a 200 kSPS throughput rate, single 5 V supply, internal 2.5 V reference, high-speed serial interface, and 20-pin PDIP package. The Analog Devices AD977/AD977A manufacturer datasheet also identifies external-reference operation and factory calibration. Its legacy through-hole package suits designs that value PCB simplicity over very high conversion speed.
What is the best cross-brand equivalent for AD977AANZ?
No cross-brand drop-in equivalent for the AD977AANZ has been established. A functionally similar 16-bit ADC is not automatically a replacement because the AD977AANZ uses a specific 20-pin PDIP pinout, 200 kSPS throughput, serial timing, reference arrangement, and acquisition behavior. The verified replacement path is the Analog Devices AD977ABNZ or AD977ABN after checking the official datasheet.

Dữ liệu tham khảo kỹ thuật cho AD977AANZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the AD977AANZ when a legacy system needs a 16-bit, one-channel SAR ADC with a 200 kSPS throughput rate, single 5 V operation, internal 2.5 V reference, and a 20-pin PDIP footprint. Select AD977ABNZ when the same electrical architecture and package are required but a different Analog Devices temperature grade is preferable. Select AD977ABN when its documented grade and operating-temperature range better match the deployment environment. Both verified alternatives retain the core 16-bit, 200 kSPS, 5 V conversion parameters, but their grade-specific characteristics must be checked in the official datasheet. Do not choose a generic 16-bit converter solely by resolution or sampling rate; interface timing, acquisition behavior, reference configuration, and the complete 20-pin mapping must also be compatible.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này AD977ABNZ AD977ABN
Package 20-pin PDIP 20-pin PDIP 20-pin PDIP
Brand Analog Devices Analog Devices Analog Devices
Resolution 16 bit 16 bit 16 bit
Throughput Rate 200 kSPS 200 kSPS 200 kSPS
Supply Voltage 5 V 5 V 5 V
Converter Architecture Successive-approximation ADC Successive-approximation ADC Successive-approximation ADC
Internal Reference 2.5 V 2.5 V 2.5 V
Data Interface Serial, SPI-compatible Serial Serial
Input Channels 1 channel 1 channel 1 channel

Bảo phân biệt quan trọng

  • Matches the verified 200 kSPS conversion rate (vsAD977ABNZ)
  • Retains the same single 5 V supply arrangement (vsAD977ABN)
  • Preserves the same 20-pin PDIP footprint (vsAD977ABNZ)

Ghi chú thiết kế

Route the analog input and reference connections away from digital clock traces, switching-node copper, and high-current return paths. Place the input filtering network close to the ADC input so that settling occurs before the sampled window. For a 20-pin through-hole layout, preserve the 0.300 in (7.62 mm) pitch and verify every net against the numbered pin-description table in the manufacturer datasheet.

Decouple the 5 V supply close to the analog power pins and keep return-current paths short. The analog input source impedance and external filter capacitors must permit the sampling network to settle during the acquisition interval. If an external reference replaces the internal 2.5 V source, verify its noise, stability, startup behavior, and allowable input range against the AD977/AD977A electrical characteristics.

Do not assume that a converter with the same 16-bit resolution is interchangeable because interface timing, acquisition behavior, reference polarity, and pin assignment may differ. Confirm the complete numbered 20-pin mapping, digital mode, conversion timing, and operating-temperature grade before substituting AD977ABNZ or AD977ABN. Also avoid driving the analog input beyond the selected reference range.

Use a low-noise, stable reference and place reference-decoupling components close to the associated converter pins. Check that digital activity on the serial interface does not couple into the analog input through board capacitance or shared return paths. A controlled analog ground region and short, continuous ground connections are preferable to a split-ground arrangement that creates unpredictable return currents.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No explicit RoHS, REACH, halogen-free, lead-free, or conflict-minerals statement was identified for this exact ordering code. AEC-Q100 qualification is not applicable to the identified industrial and legacy converter application.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD977AANZ datasheet AD977AANZ datasheet pdf AD977AANZ pinout AD977AANZ specifications Analog Devices AD977AANZ AD977AANZ 20-DIP AD977AANZ 200 kSPS ADC AD977AANZ drop-in replacement AD977AANZ vs AD977ABNZ AD977AANZ equivalent AD977AANZ price AD977AANZ stock AD977AANZ application circuit AD977AANZ 16-bit SAR ADC

Các bộ phận và thuật ngữ liên quan

Analog Devices AD977AANZ AD977ABNZ AD977ABN AD977ANZ successive-approximation ADC SAR ADC analog-to-digital converter ADC/DAC integrated circuit semiconductor switched-capacitor ADC 16-bit resolution 200 kSPS single 5 V supply 2.5 V internal reference external reference SPI-compatible serial interface 20-pin PDIP through-hole package industrial process control data acquisition factory calibration power dissipation
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ