Analog Devices

ADM237LAQ - 5V RS-232 Transceiver | Analog Devices

MPN: ADM237LAQ ✓ Hoạt động
5 V Vdss 1 uA Id 24-pin ceramic DIP Package
MOQ: 1 |

ADM237LAQ Tóm tắt

The Analog Devices ADM237LAQ is a 5 V powered CMOS RS-232 drivers and receivers IC packaged in a 24-pin ceramic DIP. It supports data rates up to 120 kB/s, provides an on-board DC-DC converter for 9 V output swing, and uses 1 uF capacitors for charge-pump operation. The device also includes low-power shutdown, receivers that remain active in shutdown, and receiver inputs rated to 30 V.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a peripheral using the RS-232 electrical standard. Its transmitter translates CMOS logic into RS-232-compatible levels, while its receiver converts the bipolar serial signal back into CMOS logic. Within the interface hierarchy, the ADM237LAQ belongs to the RS-232 transceiver class of interface ICs used for robust point-to-point serial data links.

Key features include a single 5 V supply, compliance with the EIA-232-E and V.28 specifications listed in the manufacturer datasheet, operation at 120 kB/s, and a 9 V output swing generated by the internal DC-DC converter. Small 1 uF charge-pump capacitors reduce board-area requirements. A shutdown function supports power-sensitive systems, while active-in-shutdown receivers can monitor a remote link when the main transmitter circuitry is disabled.

The ADM237LAQ combines multiple drivers and receivers with internal charge-pump circuitry, allowing a compact implementation of an RS-232 port without external level-shifting transistors. Its CMOS implementation is intended for low-power logic systems operating from 5 V. The internal voltage conversion allows the transmitters to produce RS-232-level voltages from the single 5 V supply, reducing the number of external power rails required by the host system.

Typical applications include industrial control links, test equipment, instrumentation, data-acquisition systems, and embedded serial ports. The device is particularly useful where a legacy RS-232 interface must coexist with modern 5 V CMOS logic and where a regulated 5 V supply is available but a separate RS-232 supply is undesirable. The 24-pin ceramic DIP format is suited to through-hole industrial and legacy-system assemblies rather than compact surface-mount designs.

When designing around the ADM237LAQ, place the 1 uF charge-pump capacitors close to their specified pins and route the interface connector and cable ground correctly because RS-232 is a single-ended, bipolar standard. Confirm signal levels and timing at the receiver before assuming a modern serial controller can connect directly. The ceramic DIP package also requires adequate through-hole spacing and appropriate assembly clearances.

This product page consolidates the exact orderable MPN, interface characteristics, package information, design guidance, and sourcing questions into one engineering reference. It also distinguishes documented drop-in substitutions from merely similar RS-232 devices, helping engineers avoid PCB, logic-family, or voltage-swing mismatches during redesign and maintenance.

Bộ thay thế dễ dàng lắp đặt cho ADM237LAQ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADM237LAQ (cùng hình factor và footprint) — khác nhau ở Mounting Type, Package, Product Type.

Analog Devices
Mounting Type: Surface mount
Package: 24-SOIC
Product Type: RS-232 driver/receiver transceiver
So sánh với ADM237LAQ →

ADM237LJR

✅ Drop-In
Analog Devices
📦 24-pin ceramic DIP
RS-232 driver/receiver transceiver · 5 · 3 · 5 V · 4.75 V to 5.25 V · 120 kB/s · 9 V · 1 µF

Liên hệ để biết giá

Xem tài liệu →

ADM237LAQ Thông số kỹ thuật

Product Type RS-232 Drivers and Receivers Transceiver
Điện áp cung cấp 5 V
Maximum Data Rate 120 kB/s
RS-232 Output Swing 9 V
Charge-Pump Capacitance 1 uF
Receiver Input Voltage Rating 30 V
Receiver Shutdown Current 1 uA
Driver and Receiver Count 5:3
Interface Standard EIA-232-E and V.28
Logic Family CMOS
Power Supply Type Single 5 V supply
Shutdown Control Yes
Receivers Active in Shutdown Yes
On-Board DC-DC Converter Yes
Hộp 24-pin ceramic DIP
Kiểu lắp đặt Through-hole

Hướng dẫn cấu hình chân ADM237LAQ 24-pin ceramic dip

Cấu hình chân cho ADM237LAQ (24-pin ceramic dip gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 24-pin ceramic dip cho ADM237LAQ

Không có dữ liệu chân cụ thể sẵn có cho ADM237LAQ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADM237LAQ phù hợp cho 6 Áp dụngs: Industrial Control Serial Links, Test and Measurement Equipment, Data Acquisition Systems, Embedded Serial Port Expansion, Instrumentation and Sensor Interfaces, Legacy Equipment Maintenance.

🏭

Industrial Control Serial Links

The ADM237LAQ fits legacy industrial controllers that expose a 5 V CMOS logic interface and require an RS-232 connection to equipment such as drives, indicators, or service consoles. Its documented 120 kB/s data rate covers many supervisory and configuration protocols, while the internal DC-DC converter produces a 9 V output swing from one 5 V rail. The 24-pin ceramic DIP supports through-hole assemblies and field-replaceable controller boards. Designers should preserve the specified 1 uF charge-pump capacitors, validate grounding at the connector, and test the protocol timing across the full operating environment.

🔧

Test and Measurement Equipment

ADM237LAQ is suitable for laboratory instruments and test systems that retain RS-232 ports for host-computer control, calibration, or legacy peripheral compatibility. The 5 V supply and 120 kB/s rate support a compact controller implementation without requiring a separate transmitter supply. Its 5:3 driver and receiver organization allows several RS-232 lines to be managed in one interface IC. Keep the 1 uF charge-pump capacitors close to the device pins, provide a continuous signal-ground path, and verify that the host UART, cable length, and framing are compatible with the target instrument.

📊

Data Acquisition Systems

The ADM237LAQ can connect a data-acquisition controller or embedded instrument to a host computer over RS-232 when the system already uses 5 V CMOS logic. Its documented 120 kB/s ceiling accommodates moderate-rate command, status, and measurement traffic, and the internal DC-DC converter provides the required 9 V transmit swing from a single 5 V source. The 24-pin ceramic DIP is practical for legacy through-hole acquisition boards that need field replacement. Designers should test the complete cable and grounding arrangement because command latency and data integrity can be affected by wiring, interference, and protocol overhead.

🧩

Embedded Serial Port Expansion

ADM237LAQ provides a practical path for adding an RS-232 port to a 5 V embedded controller that lacks a native RS-232 physical layer. The device combines five drivers and three receivers, supports rates up to 120 kB/s, and generates a 9 V output swing through its on-board converter. That integration reduces the number of external discrete level shifters and support components. The through-hole ceramic DIP package suits retrofit boards rather than highly compact new products. Firmware must provide framing and error handling because RS-232 is a point-to-point physical interface and does not itself define a command protocol.

📡

Instrumentation and Sensor Interfaces

The ADM237LAQ is appropriate for instrumentation modules that must communicate with an older RS-232 host while operating internally from 5 V. The 120 kB/s data rate and 9 V output swing meet common low-to-moderate-rate instrument-control requirements, while shutdown can reduce consumption when the interface is idle. Its receiver input tolerance of 30 V provides additional margin for common wiring conditions, although the design still needs appropriate protection. Preserve the datasheet capacitor layout, use a low-impedance connector ground, and validate command integrity with the intended cable before production deployment.

🛠️

Legacy Equipment Maintenance

ADM237LAQ is useful for maintaining older RS-232-equipped equipment where a ceramic DIP transceiver is already specified on the board and replacement should not require a layout redesign. The part consolidates drivers, receivers, shutdown control, and the charge-pump converter into one 24-pin package. Its single 5 V supply arrangement can simplify repair-board power requirements compared with designs using external transmitter circuitry. Technicians should confirm the exact pin assignment, observe electrostatic-handling precautions, and observe capacitor polarity if polarized capacitors are used. Substitution should be based on the exact electrical and mechanical requirements of the failed assembly.

What is the ADM237LAQ?
The ADM237LAQ is a 5 V powered CMOS RS-232 transceiver from Analog Devices with integrated drivers, receivers, and a DC-DC converter. According to the Analog Devices datasheet, it supports data rates up to 120 kB/s and generates a 9 V RS-232 output swing from one 5 V supply. It is packaged in a 24-pin ceramic DIP and is intended for systems that require a conventional RS-232 port without a separate high-voltage transmitter supply.
What are the key specifications of ADM237LAQ that engineers should know?
The ADM237LAQ is a 5 V, 120 kB/s RS-232 transceiver in a 24-pin ceramic DIP. According to the Analog Devices datasheet, it includes 5 drivers and 3 receivers, an on-board DC-DC converter producing a 9 V output swing, 1 uF charge-pump capacitors, shutdown control, receiver operation in shutdown, and receiver inputs tolerant to 30 V. It also meets the EIA-232-E and V.28 specifications stated in the datasheet.
Where can I download the ADM237LAQ datasheet PDF?
The ADM237LAQ datasheet can be accessed through the Analog Devices document listed on the datasheet portal for this exact orderable MPN. The manufacturer document identifies the part as a 5 V powered CMOS RS-232 drivers and receivers IC and includes the interface specifications, electrical characteristics, and connection information needed for design review. Use the exact ADM237LAQ designation when reviewing ceramic-package and ordering-option details.
Where can I find the ADM237LAQ pinout?
The ADM237LAQ pin assignment and connection information are shown in the manufacturer datasheet. The part uses a 24-pin ceramic DIP package, so the physical layout has 24 numbered through-hole positions rather than a compact surface-mount footprint. Before assigning PCB tracks, use the pin-description and connection diagrams in the datasheet to identify the driver, receiver, supply, ground, shutdown, and charge-pump connections for the exact ADM237LAQ ordering code.
Can ADM237LAQ operate from a single 5 V supply?
Yes. The ADM237LAQ operates from a single 5 V supply and uses its on-board DC-DC converter to develop the voltage required for a 9 V RS-232 output swing. According to the Analog Devices datasheet, the charge-pump network uses small 1 uF capacitors. This arrangement is useful in 5 V logic systems because it removes the need for a separate supply dedicated to the RS-232 transmitters.
What data rate does ADM237LAQ support?
The ADM237LAQ supports serial data rates up to 120 kB/s. According to the Analog Devices datasheet, it meets the EIA-232-E and V.28 specifications identified for the device. The maximum operating rate should be treated as a system limit that includes cable loading, clock accuracy, transmitter rise and fall times, receiver thresholds, and the selected communication protocol rather than only the nominal UART baud rate.
Does ADM237LAQ have a low-power shutdown mode?
Yes. The ADM237LAQ includes a low-power shutdown function, and its receivers can remain active while the main transceiver circuitry is in shutdown. According to the Analog Devices datasheet, receiver current is 1 uA in shutdown. This arrangement allows a controller to preserve receive-side monitoring or link-detection functions when full bidirectional RS-232 operation is not required.
What can replace the ADM237LAQ?
No drop-in replacement should be selected solely from the similar function described for another RS-232 device. A valid replacement must match the 24-pin ceramic DIP footprint, 5 V CMOS logic levels, 120 kB/s-class data rate, 9 V output-swing requirement, charge-pump capacitor arrangement, and shutdown behavior. The available cross-reference results do not establish that ADM207EARSZ-REEL is pin-compatible with ADM237LAQ, so it should not be treated as a drop-in substitute.
Is ADM207EARSZ-REEL the same as ADM237LAQ?
No, ADM207EARSZ-REEL should not be assumed to be the same as ADM237LAQ. The comparison result identifies both as RS-232 transceiver products, but it does not establish the same 24-pin ceramic DIP footprint or identical electrical behavior. The -REEL suffix also denotes a different orderable packaging arrangement from ADM237LAQ. Confirm pin assignments, package type, supply voltage, data rate, and shutdown configuration before considering any layout change.
What is the best cross-brand equivalent for ADM237LAQ?
A cross-brand equivalent is only suitable after its pinout and electrical ratings are verified against ADM237LAQ. The required match is a 24-pin through-hole arrangement with 5 V CMOS interfacing, RS-232 levels, at least the required data rate, compatible shutdown behavior, and acceptable charge-pump implementation. No cross-brand drop-in part is established by the available cross-reference results, so use the Request a Quote form for an engineering review of a specific candidate.
When should I choose ADM237LAQ over a surface-mount RS-232 transceiver?
Choose ADM237LAQ when an existing through-hole PCB layout requires a 24-pin ceramic DIP RS-232 interface operating from 5 V. Its internal DC-DC converter supplies the documented 9 V output swing, and the 120 kB/s rate suits many control and instrumentation links. A surface-mount transceiver may be preferable for new compact designs, but it requires a different footprint and component-placement strategy rather than a direct replacement.
Is ADM237LAQ suitable for industrial control and instrumentation?
The ADM237LAQ can suit industrial control and instrumentation links that use the RS-232 interface and require a through-hole 24-pin implementation. Its documented 120 kB/s data rate, 9 V output swing, 1 uF charge-pump capacitors, and 30 V receiver input capability support practical serial-interface implementations. The application still requires normal RS-232 grounding, cable-length consideration, surge protection decisions, and validation at the required environmental limits.
Where can I buy ADM237LAQ and check its lead time?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for ADM237LAQ. The available listing information does not establish a fixed quantity-break schedule or a confirmed delivery commitment, so those commercial terms should be obtained through the quote process. The exact orderable part is ADM237LAQ in the 24-pin ceramic DIP package.
How much does ADM237LAQ cost?
The current commercial terms for ADM237LAQ should be obtained through the Request a Quote form on this page. No fixed unit-price schedule is established for this exact MPN because the available listing does not print quantity-break prices for the 24-pin ceramic DIP configuration. The quote request should identify ADM237LAQ, the required quantity, and the desired delivery destination so the response reflects the correct orderable configuration.
Is ADM237LAQ in stock?
Stock status should be confirmed through the Request a Quote form on this page because no definitive inventory commitment is established for the exact ADM237LAQ ordering code. Some listings indicate components may be in stock or have a price reference, while another states that inventory and lead time are to be confirmed. Treat the quote response as the current commercial confirmation for quantity and delivery planning.
What RS-232 standards does ADM237LAQ meet?
The ADM237LAQ meets the EIA-232-E and V.28 specifications identified in the Analog Devices datasheet. According to the manufacturer document, the device is a 5 V powered CMOS RS-232 drivers and receivers IC operating at up to 120 kB/s. Compliance applies to the stated interface requirements; system-level EMC, surge exposure, cable length, and grounding still depend on the enclosure, connector, protection network, and PCB implementation.

Dữ liệu tham khảo kỹ thuật cho ADM237LAQ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose ADM237LAQ when maintaining or designing a 5 V system that requires a through-hole 24-pin ceramic DIP RS-232 interface, a 120 kB/s-class data rate, and a 9 V transmit swing generated internally. It is a strong fit for legacy industrial controllers, test equipment, instrumentation, and service interfaces because it consolidates 5 drivers, 3 receivers, shutdown control, and the DC-DC converter into one device. Do not select it when a compact surface-mount footprint is essential, or when the system already uses RS-232 parts with a different pin arrangement. Avoid choosing ADM207EARSZ-REEL as a direct substitute without an engineering review of package, pinout, voltage levels, shutdown behavior, and output-swing requirements. For a new surface-mounted product, a suitably qualified RS-232 transceiver in the intended footprint may offer a better assembly strategy.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Brand Analog Devices
Package 24-pin ceramic DIP
Supply Voltage 5 V
Maximum Data Rate 120 kB/s
RS-232 Output Swing 9 V
Driver and Receiver Count 5:3
Charge-Pump Capacitance 1 uF
Receiver Input Voltage Rating 30 V
Shutdown Receiver Current 1 uA
Interface Standards EIA-232-E and V.28

Bảo phân biệt quan trọng

  • Single-supply 9 V RS-232 output swing (vsADM207EARSZ-REEL)
  • Original 24-pin ceramic-DIP configuration (vsADM207EARSZ-REEL)
  • Shutdown operation with active receivers (vsADM207EARSZ-REEL)

Ghi chú thiết kế

Place the specified 1 uF charge-pump capacitors close to the ADM237LAQ pins identified in the manufacturer datasheet, and keep their return-current paths short. These capacitors support the on-board DC-DC converter that produces the documented 9 V RS-232 output swing. Avoid placing long traces between the capacitor terminals and the device, and route the high-current charge-pump paths away from sensitive receiver inputs to reduce potential switching disturbance.

Do not treat a generally similar RS-232 transceiver as a drop-in replacement for ADM237LAQ. The replacement must match the 24-pin ceramic DIP footprint, 5 V CMOS logic interface, 5:3 channel arrangement, shutdown behavior, and charge-pump implementation. ADM207EARSZ-REEL has a different ordering and package context and is not established as pin-compatible. Verify the manufacturer pinout and electrical table for every proposed substitution.

Use a stable 5 V supply with low impedance at the ADM237LAQ supply pins. The internal converter creates the 9 V transmit swing, so inadequate supply decoupling can reduce output level or introduce disturbance into adjacent logic. Follow the manufacturer connection diagram for bypass components and keep the RS-232 connector return connected to the circuit ground through a short, appropriately designed path.

RS-232 uses bipolar single-ended signaling, so cable routing and ground quality influence noise immunity. Keep the interface connector ground continuous, minimize loop area, and separate the RS-232 route from sensitive sensor or timing traces. Although the ADM237LAQ receiver input is rated to 30 V, that rating is not a substitute for surge protection or overvoltage protection in exposed industrial cabling.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer datasheet feature information does not state the requested environmental or substance-compliance classifications. AEC-Q100 is recorded as not applicable because the part is an industrial RS-232 interface IC rather than an automotive-qualified device.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ADM237LAQ datasheet ADM237LAQ pinout ADM237LAQ datasheet pdf ADM237LAQ specifications ADM237LAQ 24-pin ceramic DIP ADM237LAQ RS-232 transceiver ADM237LAQ equivalent ADM237LAQ replacement ADM237LAQ vs ADM207EARSZ-REEL Analog Devices ADM237LAQ ADM237LAQ price ADM237LAQ stock

Các bộ phận và thuật ngữ liên quan

Analog Devices ADM237LAQ ADM207EARSZ-REEL RS-232 RS-232 transceiver interface IC CMOS EIA-232-E V.28 DC-DC converter 120 kB/s 9 V output swing 30 V receiver input 1 uF charge-pump capacitor 24-pin ceramic DIP through-hole package low-power shutdown industrial control test and measurement data acquisition instrumentation
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ