Texas Instruments

ADS1286PL - 12-Bit 20kHz Micropower ADC | Texas Instruments

MPN: ADS1286PL ✓ Hoạt động
5 V Vdss 250 uA Id 8-pin PDIP Package
MOQ: 1 |

ADS1286PL Tóm tắt

Texas Instruments ADS1286PL is a 12-bit, 20kSPS micropower sampling analog-to-digital converter with one differential input, a sample-and-hold amplifier, and an 8-pin PDIP package. It operates from a 5V supply and consumes only 250uA of supply current, combining low conversion rate with compact, low-power signal acquisition for industrial, medical, and remote sensor systems.

A sampling ADC is a successive-approximation-register, or SAR, converter that acquires an analog voltage with a sample-and-hold circuit and converts it through successive bit decisions. The ADS1286 belongs to the ADC hierarchy within data-converter and signal-chain semiconductors. Its differential input accepts two related analog signals and converts their voltage difference, helping reject common-mode noise when the source is arranged as a bridge, sensor, or instrumentation amplifier.

The device provides 12-bit conversion resolution, a 20kSPS conversion rate, and a serial interface compatible with SPI and SSI protocols. The interface uses either a two-wire or three-wire arrangement described in the manufacturer datasheet. Low 250uA supply consumption is the defining micropower feature, making the converter suitable for battery-operated and remotely powered equipment where each milliampere can influence the enclosure size or service interval.

The ADS1286 uses a sample-and-hold amplifier ahead of the SAR conversion core. The analog input is sampled during the acquisition interval, after which the internal successive-approximation network resolves the sampled voltage to 12 bits. Serial data transfer reduces the number of interconnects required compared with a parallel ADC, although it also makes the host interface timing and signal-integrity design important in systems operating at higher clock rates.

Typical uses include low-frequency pressure and temperature acquisition, low-current battery monitoring, industrial panel controls, portable medical instrumentation, and remote sensor nodes. The 20kSPS rate is appropriate for many slow or medium-bandwidth physical measurements, while the 250uA supply current favors low-duty-cycle acquisition. Differential operation is especially useful when the measured signal is small relative to environmental offsets.

Designers should follow the manufacturer datasheet for input-range, reference, clock, and interface details. Keep analog and digital return paths separated, place input and reference bypass capacitors close to their pins, and account for source impedance during acquisition. The 8-pin PDIP package is through-hole and suits prototypes, legacy industrial equipment, and hand-assembled or leaded-production designs where a surface-mount footprint would be undesirable.

Bộ thay thế dễ dàng lắp đặt cho ADS1286PL — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

ADS1286PB

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 8-pin PDIP
Same 12-bit, 20kSPS differential SAR ADC architecture and 8-pin PDIP footprint; the principal difference is the ordering temperature grade, which must be confirmed in the manufacturer datasheet.

📋 Tham chiếu thay thế (không có trong danh mục)

ADS1286PL Tỷ lệ tối đa & tính chất điện

Độ phân giải 12 bit
Conversion Rate 20 kS/s
Architecture Successive-approximation-register, SAR
Analog Input Configuration 1 differential input
Điện áp cung cấp 5 V
Điện áp cung cấp 250 uA
Serial Interface SPI and SSI compatible
Interface Configuration 2-wire or 3-wire serial communication
Input Stage Sample-and-hold amplifier
Hộp 8-pin PDIP
Kiểu lắp đặt Through-hole
Power Class Micropower

Hướng dẫn cấu hình chân ADS1286PL 8-pin pdip

Cấu hình chân cho ADS1286PL (8-pin pdip gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 8-pin pdip cho ADS1286PL

Không có dữ liệu chân cụ thể sẵn có cho ADS1286PL.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADS1286PL phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Nodes, Industrial Pressure and Level Measurement, Portable Medical Instrumentation, Remote Environmental Monitoring, Battery Current and Voltage Monitoring, Legacy Instrumentation and Data Acquisition.

🧩

Battery-Powered Sensor Nodes

The ADS1286PL fits remote sensor nodes because its 250uA supply consumption and 12-bit resolution support low-energy measurement without requiring a high-speed converter. The 20kSPS rate is suitable for temperature, pressure, tank level, and other slowly changing physical quantities. A differential input can monitor a bridge or paired sensor outputs while reducing common-mode disturbance. The 5V supply and SPI/SSI-compatible interface simplify connection to a low-power microcontroller. The primary design trade-off is that the sampling architecture requires enough acquisition time for the source impedance, and continuous 20kSPS operation may consume more energy than a duty-cycled acquisition strategy.

🏭

Industrial Pressure and Level Measurement

The ADS1286PL is appropriate for industrial pressure, liquid-level, and process monitoring where signals change over a bandwidth well below its 20kSPS conversion rate. Its single differential input can accept the output of an instrumentation amplifier or bridge conditioner, and 12-bit resolution provides 4096 quantization levels. The serial SPI/SSI-compatible interface reduces wiring compared with a parallel ADC. For reliable readings, the conditioning network should keep source impedance within the acquisition limits shown in the manufacturer datasheet. The 8-pin PDIP package also simplifies repair and retrofit work in leaded industrial equipment.

💊

Portable Medical Instrumentation

The ADS1286PL can serve as the acquisition element in compact medical and laboratory instruments measuring slow physiological or analytical signals. Its 12-bit resolution and 20kSPS sampling rate are suitable for selected temperature, pressure, or sensor-interface channels, while 250uA supply current supports battery-oriented operation. Differential input helps when the useful signal is small and appears alongside common-mode voltage. The serial interface occupies fewer host-controller pins than a parallel converter. Medical designs must still evaluate signal isolation, leakage, calibration, safety requirements, and applicable quality procedures independently of the converter's electrical suitability.

🌐

Remote Environmental Monitoring

The ADS1286PL is well matched to remote environmental monitoring stations that measure temperature, humidity, soil conditions, or water levels. Its 20kSPS conversion rate is more than sufficient for these slow signals, and the 12-bit result can be sampled periodically to reduce overall system activity. Low 250uA supply current is valuable where the station relies on batteries, solar energy, or infrequent maintenance. The differential input supports balanced sensor arrangements and helps reject common-mode noise. Designers should calculate the complete energy budget, including the ADC, interface, sensor conditioning, and leakage paths, rather than considering converter consumption alone.

⚡

Battery Current and Voltage Monitoring

The ADS1286PL can monitor battery voltage, charger current, or a shunt-derived voltage where moderate resolution and low converter power are more important than high-rate waveform capture. Its differential input can measure across a current-sense element while rejecting common-mode voltage, and 20kSPS allows detailed sampling during energy-transfer events. The 12-bit resolution corresponds to 4096 code levels, while 250uA supply consumption minimizes the load introduced by the measurement channel itself. Calibration, shunt resistance, reference stability, and input protection determine practical accuracy more than the nominal converter resolution alone.

🖥️

Legacy Instrumentation and Data Acquisition

The ADS1286PL suits legacy data-acquisition and laboratory instrumentation where an 8-pin PDIP format simplifies replacement of an existing through-hole board. Its 12-bit resolution and 20kSPS conversion rate cover many general-purpose measurement channels, while the serial interface allows modern firmware to retrieve samples from a compact footprint. The 250uA operating current also benefits portable test equipment. Retrofitting still requires confirmation of pin functions, reference voltage, analog input range, and interface timing against the original schematic and the manufacturer datasheet. A soldered footprint conversion should not be attempted without electrical review.

Tóm tắt các sản phẩm được đề xuất

ADS1286PL Texas Instruments Được sử dụng trong: Battery-Powered Sensor Nodes, Industrial Pressure and Level Measurement, Portable Medical Instrumentation, Remote Environmental Monitoring, Battery Current and Voltage Monitoring, Legacy Instrumentation and Data Acquisition ADS1286PB Same-family PDIP acquisition option Được sử dụng trong: Battery-Powered Sensor Nodes, Industrial Pressure and Level Measurement, Portable Medical Instrumentation, Remote Environmental Monitoring, Battery Current and Voltage Monitoring, Legacy Instrumentation and Data Acquisition
Where can I buy ADS1286PL online?
The ADS1286PL can be requested through the Request a Quote form on this page. The part is an 8-pin PDIP package, and the Request a Quote form is the appropriate route for checking current availability, minimum order quantity, and delivery scheduling without relying on a stale catalog listing.
What is the price of ADS1286PL?
Current ADS1286PL pricing is available through the Request a Quote form on this page. The device is specified as a 12-bit, 20kSPS differential-input SAR ADC in an 8-pin PDIP package, so the quote request should be matched to that exact orderable MPN and package configuration.
What is the lead time for ADS1286PL?
The current lead time should be requested through the Request a Quote form on this page because production scheduling can change independently of the device specifications. For planning, the confirmed part is a 12-bit, 20kSPS micropower ADC in an 8-pin PDIP package, rated from the 5V supply information available for the ADS1286 family.
Is ADS1286PL in stock?
Use the Request a Quote form on this page to check current stock for the exact ADS1286PL orderable code. Stock status is not inferred from the existence of a catalog page; the confirmed configuration is a 12-bit, one-input differential SAR ADC in an 8-pin PDIP package.
What are the key specifications of ADS1286PL that engineers should know?
The ADS1286PL is a 12-bit, 20kSPS micropower sampling ADC with one differential input, 250uA supply consumption, and a 5V supply. It includes a sample-and-hold amplifier and an SPI/SSI-compatible serial interface, and it is packaged in an 8-pin PDIP. These parameters place it between low-resolution sigma-delta converters and higher-speed SAR ADCs.
What is the operating voltage of ADS1286PL?
The ADS1286PL operates from a 5V supply. According to the TI product page and manufacturer datasheet, the ADS1286 is a 12-bit, 20kSPS converter that consumes 250uA, making its 5V operating supply particularly suitable for compact, low-power acquisition systems.
What is the conversion speed of ADS1286PL?
The ADS1286PL converts at up to 20kS/s with 12-bit resolution. The TI manufacturer datasheet identifies it as a 20kHz sampling ADC, a rate suitable for pressure, temperature, level, and other physical measurements that do not require high-frequency waveform capture.
Where can I download the ADS1286PL datasheet PDF?
The official ADS1286PL datasheet PDF is available from the Texas Instruments document link on this page. It is the authoritative source for the complete pin descriptions, electrical characteristics, recommended application circuit, timing, input range, reference arrangement, and operating limits.
Where can I find the ADS1286PL pinout?
Use the pin-description table and package drawing in the TI ADS1286 datasheet to assign PCB nets. The ADS1286PL uses an 8-pin PDIP package; consult the manufacturer datasheet for the exact signal names and numbering before laying out the board or wiring a replacement assembly.
ADS1286PL vs ADS1286PB - which is better for an extended-temperature design?
Choose ADS1286PB when its specified operating-temperature range is suitable for the installation and it matches the required 12-bit, 20kSPS performance and 8-pin PDIP footprint. The two parts share the core conversion specifications, so temperature grade, lifecycle, and availability should drive the final decision rather than conversion speed.
When should I choose ADS1286PL over ADS1286PB?
Choose ADS1286PL when its temperature rating and orderable configuration match the product design and ADS1286PB does not provide the required grade. Both devices are described as 12-bit, 20kSPS differential SAR ADCs in an 8-pin PDIP package, so compare their exact temperature limits, qualification requirements, and supply status before finalizing the BOM.
Is ADS1286PL suitable for battery-powered sensor acquisition?
The ADS1286PL is suitable for battery-powered sensor acquisition when the acquisition rate and signal bandwidth fit its 20kSPS maximum conversion rate. Its 250uA supply consumption is particularly valuable in remote sensing, while the differential input helps reduce common-mode disturbance when paired with suitable sensor conditioning.
What is the best drop-in replacement for ADS1286PL?
ADS1286PB is the closest same-family candidate because it retains the 8-pin PDIP format and the 12-bit, 20kSPS ADS1286 conversion architecture. Confirm its exact temperature grade, supply limits, pin functions, lifecycle status, and acquisition timing against the manufacturer datasheet before treating it as a production drop-in replacement.
Can ADS1286PB replace ADS1286PL in an existing PCB?
ADS1286PB can be considered for an existing 8-pin PDIP ADS1286PL design only after checking pin-level functions, electrical limits, timing, and operating-temperature requirements in the manufacturer datasheet. Both parts use the same 12-bit, 20kSPS differential SAR architecture, but identical resolution and conversion rate alone do not establish full production equivalence.
What is a cross-brand replacement for ADS1286PL?
No verified cross-brand drop-in replacement is established for the ADS1286PL in the available substitution data. A suitable substitute must use the same 8-pin PDIP footprint, provide a 12-bit differential conversion, support the required 20kSPS-class sampling rate, operate from 5V, and meet the source impedance and acquisition-time requirements of the original design.

Dữ liệu tham khảo kỹ thuật cho ADS1286PL — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose ADS1286PL for new or replacement 12-bit, 20kSPS differential measurements where the 8-pin PDIP footprint, 5V supply, and low 250uA power level are important. It is particularly suitable for low-frequency industrial sensors, battery monitoring, environmental measurement, and portable instruments. Consider ADS1286PB when it provides the required temperature grade or lifecycle conditions, but verify every electrical and timing characteristic before using it as a drop-in replacement. No verified cross-brand equivalent is established, so an alternative from another manufacturer should be treated as a redesign unless its pinout, electrical limits, acquisition behavior, and timing are confirmed to match. This converter is not the right choice for high-frequency waveform capture; its 20kSPS rate is optimized for slower physical measurements where low power and a compact serial interface matter more.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADS1286PB
Package 8-pin PDIP 8-pin PDIP
Brand Texas Instruments Texas Instruments
Resolution 12 bit 12 bit
Conversion Rate 20 kS/s 20 kS/s
Architecture SAR sampling ADC SAR sampling ADC
Input Configuration 1 differential input 1 differential input
Supply Voltage 5 V 5 V
Supply Current 250 uA 250 uA
Serial Interface SPI and SSI compatible SPI and SSI compatible
Mounting Type Through-hole Through-hole

Bảo phân biệt quan trọng

  • Low conversion rate reduces acquisition-system demand (vsADS1286PB)
  • Micropower operation supports portable measurement (vsADS1286PB)
  • Differential acquisition improves signal-chain flexibility (vsADS1286PB)

Ghi chú thiết kế

Follow the manufacturer recommended application circuit and place input, reference, and bypass capacitors near the associated pins. Keep analog input traces short and avoid routing them beneath digital clock or serial-data paths. For the 8-pin PDIP footprint, observe the package pin-one orientation on the board and use the manufacturer pin-description table as the authority for every net assignment.

The sample-and-hold input must settle sufficiently during each acquisition interval. Verify the worst-case source impedance, output impedance of the sensor or amplifier, and the required settling error using the acquisition-time equations in the manufacturer datasheet. A high source impedance can produce gain errors that appear as inaccurate readings even though the converter itself is functioning correctly.

Do not assume that the differential input accepts arbitrary signals. Confirm the analog input range, common-mode limits, reference arrangement, and absolute maximum ratings before connecting a bridge, shunt, or sensor. The SPI/SSI-compatible interface also requires correct clock polarity, clock phase, data validity timing, and conversion-start behavior for the particular controller implementation.

Estimated: the ADC's stated 250uA supply current at 5V corresponds to approximately 1.25mW of device power consumption, using 5V multiplied by 250uA. Total acquisition-channel power will also include the sensor, interface driver, reference circuitry, leakage paths, and any voltage regulator, so calculate the complete rail budget before assigning battery life.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance declarations were not established by the manufacturer page or datasheet excerpts used for this product record. Automotive qualification status is also unknown and should not be inferred from the industrial-style package code.

Dữ liệu được xác minh vào: 2026-11-14 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ADS1286PL datasheet ADS1286PL pinout ADS1286PL datasheet pdf ADS1286PL 8-PDIP ADS1286PL 12-bit ADC ADS1286PL 20kSPS ADS1286PL 250uA ADS1286PL equivalent ADS1286PL replacement ADS1286PL vs ADS1286PB ADS1286PL differential sensor Texas Instruments ADS1286PL ADS1286PL price ADS1286PL stock

Các bộ phận và thuật ngữ liên quan

Texas Instruments ADS1286PL ADS1286PB 12-bit ADC sampling analog-to-digital converter successive-approximation-register SAR differential input sample-and-hold amplifier micropower ADC SPI SSI 20kSPS 250uA supply current 5V analog supply 8-pin PDIP PDIP package family through-hole package surface mount industrial sensor acquisition battery current monitoring remote environmental monitoring portable medical instrumentation process signal measurement
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ