AK5367EF - 24-Bit 96kHz 4-Channel Audio ADC | AKM
MPN: AK5367EF ✓ Hoạt độngAK5367EF Tóm tắt
An audio ADC is a mixed-signal data-acquisition IC that converts analog audio signals into high-resolution digital words for processing by DSPs, microcontrollers, audio codecs, or digital recording equipment. In the broader semiconductor hierarchy, the AK5367EF belongs to the ADC/DAC class of data-conversion ICs, combining a low-noise analog input stage, delta-sigma modulator, digital filter, and serial digital interface in one integrated circuit.
The principal features of the AK5367EF include 24-bit resolution, a maximum sampling frequency of 96kHz, four selectable analog input channels, and a 0V-bias selector. These characteristics suit systems that need to capture multiple analog sources while maintaining a consistent digital audio format. The selector function allows a system to route or select among multiple audio inputs, reducing the need for separate analog switching devices when the selected channels share compatible signal characteristics.
Internally, the AK5367EF uses a delta-sigma conversion architecture suitable for high-resolution audio digitization. Its multi-channel selector and digital output interface position it between analog microphone or line-level front ends and a downstream digital audio processor. The 30-VSOP package requires careful PCB layout around high-speed digital signals and analog input routing to maintain signal integrity and minimize channel-to-channel interference.
Typical uses include consumer audio equipment, digital recorders, multimedia appliances, instrument or mixer input modules, and multi-source digital audio capture systems. When designing around this converter, pay particular attention to analog supply decoupling, reference stability, input common-mode range, supported interface mode, and the required relationship between master clock, serial clock, and data timing.
This page combines the verified product characteristics with practical integration guidance, an explicit drop-in-replacement assessment, and an application-oriented comparison framework. Engineers should use the manufacturer datasheet for the authoritative pin-description table, timing diagrams, recommended external circuitry, and electrical-limit values before finalizing a PCB or production design.
Bộ thay thế dễ dàng lắp đặt cho AK5367EF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AK5367EF (cùng hình factor và footprint) — khác nhau ở Converter Type, Package.
AK5367AEF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AK5367EF-E2
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AK5367EF Tỷ lệ tối đa & tính chất điện
| Converter Type | 24-bit delta-sigma audio ADC |
| Độ phân giải | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Input Channel Count | 4 channels |
| Input Selector Bias | 0 V bias |
| Device Type | Stereo ADC with 4-channel selector |
| Application Category | Consumer audio and digital recording |
| Supply Voltage Range | 3 V to 3.6 V |
| Hộp | 30-VSOP |
| Kiểu lắp đặt | Surface mount |
| Manufacturing Status | Full developed and mass-produced |
Hướng dẫn cấu hình chân AK5367EF 30-vsop
Cấu hình chân cho AK5367EF (30-vsop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AK5367EF.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AK5367EF phù hợp cho 6 Áp dụngs: Digital Audio Recorders, Consumer Audio Equipment, Multimedia Audio Capture, Instrument and Mixer Inputs, Professional Recording Interfaces, Digital Audio Mixer Modules.
Digital Audio Recorders
The AK5367EF fits digital recorders that digitize multiple analog audio sources at up to 96kHz. Its 24-bit conversion resolution preserves low-level signal detail, while the four-channel selector reduces the need for separate analog switching when the incoming sources share compatible levels and impedance. Place the converter after the input conditioning stage, keep analog traces short, and route its digital output to the recorder's audio processor. The principal design tradeoff is that the selector does not remove the need to ensure every source remains within the specified input and common-mode ranges.
Được đề xuất
Consumer Audio Equipment
The AK5367EF is suitable for consumer audio products requiring a high-resolution stereo ADC with an integrated four-channel selector. Its 96kHz sampling capability supports high-quality digital audio paths, while the 0V-bias selector operation can simplify designs that accept centered analog signals. Use the device following the input gain and impedance-conditioning stages, then feed its digital stream into an audio DSP or digital interface. Layout should preserve a quiet analog return path and prevent high-speed digital and switching-supply currents from crossing the converter input nodes.
Được đề xuất
Multimedia Audio Capture
The AK5367EF can serve as the front-end ADC in multimedia appliances that capture several compatible analog sources and convert them to 24-bit digital audio. The four-channel selector allows source selection within one converter, while operation up to 96kHz supports higher-resolution capture than standard CD-rate operation. The system designer should establish source-specific gain and protection before the ADC and use the manufacturer's clock and serial-interface recommendations. Verify that the selected source impedance and voltage range match the datasheet rather than assuming all four inputs are interchangeable.
Được đề xuất
Instrument and Mixer Inputs
The AK5367EF can be applied in digital mixer or instrument input modules requiring high-resolution conversion and selection among several analog sources. Its 24-bit architecture is appropriate for preserving dynamic detail, and the 96kHz rate allows designers to oversample relative to lower-rate playback formats when the source bandwidth supports it. Use the selector only where source levels, impedance, and common-mode conditions are compatible. Analog gain control and input protection should remain outside the converter, and the digital output should connect to the mixer's processing engine with timing checked against the interface specification.
Được đề xuất
Professional Recording Interfaces
The AK5367EF is a practical conversion stage for a professional recording interface requiring 24-bit data and sampling capability up to 96kHz. The integrated four-way selector can consolidate several compatible input sources before digitization, reducing board area and external switching complexity. Performance will depend on the preceding preamplifier, reference design, clock source, and digital implementation; the converter cannot compensate for inadequate input drive or poor grounding. Confirm the supported input topology and bypass-network values in the manufacturer datasheet before releasing production hardware.
Được đề xuất
Digital Audio Mixer Modules
The AK5367EF can digitize multiple source channels in a modular digital mixer, allowing selected analog inputs to feed a common digital processing path. Its four-channel selector and 0V-bias operation suit centralized source routing, while 24-bit resolution and a 96kHz maximum rate support high-quality internal buses. Each source path still needs appropriate attenuation, gain, and impedance conditioning, and the converter's digital interface must match the downstream DSP. PCB implementation should isolate analog input routing from clock and data return currents while preserving the recommended ground reference.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AK5367EF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Ghi chú thiết kế
Use the AK5367 manufacturer land pattern and pin-description table for the 30-VSOP footprint; the search results do not provide a complete terminal assignment. Route analog inputs and reference-related nodes away from digital clocks and serial data, keep input traces short, and provide a stable local ground reference. Confirm exposed-pad or thermal-pad requirements from the package drawing because the available product summaries identify only the 30-VSOP format.
Treat the master clock, serial clock, and data connections as a matched timing interface. Use the datasheet timing diagrams to determine permissible skew, clock mode, and data setup or hold requirements. If the ADC drives a processor board through a cable or long trace, add source-series damping and receiver termination only after evaluating the complete clock topology; indiscriminate termination can degrade the clock waveform.
Decouple the analog and digital supply pins separately using the capacitance values and placement shown in the manufacturer application circuit. Route supply and ground returns so switching-converter current does not flow beneath the analog input paths. Because the exact current ratings, sequencing requirements, and bypass values are not included in the product summary, consult the AK5367 datasheet before finalizing the power tree.
Do not assume that four selected inputs share identical usable signal range, impedance, or bias requirements merely because they use one selector. Validate every source against the absolute maximum ratings, analog input range, common-mode range, and recommended driver impedance. Also avoid treating AK5367AEF, AK5366, or AK5368 as automatic drop-in replacements; their available family descriptions do not establish identical pinout and timing.
Thông tin tuân thủ
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations appear in the product information. Confirm these attributes with the manufacturer before regulatory submission.