AK5367EF - 24-Bit 96kHz 4-Channel Audio ADC | AKM
料号: AK5367EF ✓ 量产中AK5367EF 概述
An audio ADC is a mixed-signal data-acquisition IC that converts analog audio signals into high-resolution digital words for processing by DSPs, microcontrollers, audio codecs, or digital recording equipment. In the broader semiconductor hierarchy, the AK5367EF belongs to the ADC/DAC class of data-conversion ICs, combining a low-noise analog input stage, delta-sigma modulator, digital filter, and serial digital interface in one integrated circuit.
The principal features of the AK5367EF include 24-bit resolution, a maximum sampling frequency of 96kHz, four selectable analog input channels, and a 0V-bias selector. These characteristics suit systems that need to capture multiple analog sources while maintaining a consistent digital audio format. The selector function allows a system to route or select among multiple audio inputs, reducing the need for separate analog switching devices when the selected channels share compatible signal characteristics.
Internally, the AK5367EF uses a delta-sigma conversion architecture suitable for high-resolution audio digitization. Its multi-channel selector and digital output interface position it between analog microphone or line-level front ends and a downstream digital audio processor. The 30-VSOP package requires careful PCB layout around high-speed digital signals and analog input routing to maintain signal integrity and minimize channel-to-channel interference.
Typical uses include consumer audio equipment, digital recorders, multimedia appliances, instrument or mixer input modules, and multi-source digital audio capture systems. When designing around this converter, pay particular attention to analog supply decoupling, reference stability, input common-mode range, supported interface mode, and the required relationship between master clock, serial clock, and data timing.
This page combines the verified product characteristics with practical integration guidance, an explicit drop-in-replacement assessment, and an application-oriented comparison framework. Engineers should use the manufacturer datasheet for the authoritative pin-description table, timing diagrams, recommended external circuitry, and electrical-limit values before finalizing a PCB or production design.
直接替换替代料: AK5367EF ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: AK5367EF (相同外形与封装尺寸) ——差异在于 Converter Type, Package.
AK5367AEF
✅ 直接替换联系询价
查看数据手册 →AK5367EF-E2
✅ 直接替换📋 参考替代料(不在目录中)
AK5367EF 最大额定值与电气特性
| Converter Type | 24-bit delta-sigma audio ADC |
| 分辨率 | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Input Channel Count | 4 channels |
| Input Selector Bias | 0 V bias |
| Device Type | Stereo ADC with 4-channel selector |
| Application Category | Consumer audio and digital recording |
| Supply Voltage Range | 3 V to 3.6 V |
| 封装 | 30-VSOP |
| 安装类型 | Surface mount |
| Manufacturing Status | Full developed and mass-produced |
AK5367EF 30-vsop 引脚配置指南
AK5367EF(30-vsop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AK5367EF.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AK5367EF 适用于 6 应用s: Digital Audio Recorders, Consumer Audio Equipment, Multimedia Audio Capture, Instrument and Mixer Inputs, Professional Recording Interfaces, Digital Audio Mixer Modules.
Digital Audio Recorders
The AK5367EF fits digital recorders that digitize multiple analog audio sources at up to 96kHz. Its 24-bit conversion resolution preserves low-level signal detail, while the four-channel selector reduces the need for separate analog switching when the incoming sources share compatible levels and impedance. Place the converter after the input conditioning stage, keep analog traces short, and route its digital output to the recorder's audio processor. The principal design tradeoff is that the selector does not remove the need to ensure every source remains within the specified input and common-mode ranges.
推荐
Consumer Audio Equipment
The AK5367EF is suitable for consumer audio products requiring a high-resolution stereo ADC with an integrated four-channel selector. Its 96kHz sampling capability supports high-quality digital audio paths, while the 0V-bias selector operation can simplify designs that accept centered analog signals. Use the device following the input gain and impedance-conditioning stages, then feed its digital stream into an audio DSP or digital interface. Layout should preserve a quiet analog return path and prevent high-speed digital and switching-supply currents from crossing the converter input nodes.
推荐
Multimedia Audio Capture
The AK5367EF can serve as the front-end ADC in multimedia appliances that capture several compatible analog sources and convert them to 24-bit digital audio. The four-channel selector allows source selection within one converter, while operation up to 96kHz supports higher-resolution capture than standard CD-rate operation. The system designer should establish source-specific gain and protection before the ADC and use the manufacturer's clock and serial-interface recommendations. Verify that the selected source impedance and voltage range match the datasheet rather than assuming all four inputs are interchangeable.
推荐
Instrument and Mixer Inputs
The AK5367EF can be applied in digital mixer or instrument input modules requiring high-resolution conversion and selection among several analog sources. Its 24-bit architecture is appropriate for preserving dynamic detail, and the 96kHz rate allows designers to oversample relative to lower-rate playback formats when the source bandwidth supports it. Use the selector only where source levels, impedance, and common-mode conditions are compatible. Analog gain control and input protection should remain outside the converter, and the digital output should connect to the mixer's processing engine with timing checked against the interface specification.
推荐
Professional Recording Interfaces
The AK5367EF is a practical conversion stage for a professional recording interface requiring 24-bit data and sampling capability up to 96kHz. The integrated four-way selector can consolidate several compatible input sources before digitization, reducing board area and external switching complexity. Performance will depend on the preceding preamplifier, reference design, clock source, and digital implementation; the converter cannot compensate for inadequate input drive or poor grounding. Confirm the supported input topology and bypass-network values in the manufacturer datasheet before releasing production hardware.
推荐
Digital Audio Mixer Modules
The AK5367EF can digitize multiple source channels in a modular digital mixer, allowing selected analog inputs to feed a common digital processing path. Its four-channel selector and 0V-bias operation suit centralized source routing, while 24-bit resolution and a 96kHz maximum rate support high-quality internal buses. Each source path still needs appropriate attenuation, gain, and impedance conditioning, and the converter's digital interface must match the downstream DSP. PCB implementation should isolate analog input routing from clock and data return currents while preserving the recommended ground reference.
推荐
推荐产品汇总
工程参考数据: AK5367EF ——对比、设计指导和合规信息。
选型指南
设计说明
Use the AK5367 manufacturer land pattern and pin-description table for the 30-VSOP footprint; the search results do not provide a complete terminal assignment. Route analog inputs and reference-related nodes away from digital clocks and serial data, keep input traces short, and provide a stable local ground reference. Confirm exposed-pad or thermal-pad requirements from the package drawing because the available product summaries identify only the 30-VSOP format.
Treat the master clock, serial clock, and data connections as a matched timing interface. Use the datasheet timing diagrams to determine permissible skew, clock mode, and data setup or hold requirements. If the ADC drives a processor board through a cable or long trace, add source-series damping and receiver termination only after evaluating the complete clock topology; indiscriminate termination can degrade the clock waveform.
Decouple the analog and digital supply pins separately using the capacitance values and placement shown in the manufacturer application circuit. Route supply and ground returns so switching-converter current does not flow beneath the analog input paths. Because the exact current ratings, sequencing requirements, and bypass values are not included in the product summary, consult the AK5367 datasheet before finalizing the power tree.
Do not assume that four selected inputs share identical usable signal range, impedance, or bias requirements merely because they use one selector. Validate every source against the absolute maximum ratings, analog input range, common-mode range, and recommended driver impedance. Also avoid treating AK5367AEF, AK5366, or AK5368 as automatic drop-in replacements; their available family descriptions do not establish identical pinout and timing.
合规信息
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations appear in the product information. Confirm these attributes with the manufacturer before regulatory submission.