ATF16V8BQL-15JU - 15 ns Flash PLD | Microchip Logic
MPN: ATF16V8BQL-15JU ✓ Hoạt độngATF16V8BQL-15JU Tóm tắt
An electrically erasable PLD is a semiconductor that stores configurable logic functions in nonvolatile memory. It occupies the GAL16V8 and 16R8 design niche while simplifying programming because the configuration can be erased and rewritten instead of relying on one-time-programmable fuse links. In the broader hierarchy, the ATF16V8BQL is a simple PLD, which is a programmable logic device, an FPGA-family implementation using macrocell-based logic rather than a sea of configurable lookup logic.
The device provides 250 logic gates, 8 macrocells, and up to 16 inputs with 8 configurable I/O pins. Its 5 V nominal supply is specified over 5 V ±10% for the industrial speed ranges. A typical low-power standby current of 5 mA and automatic entry into a low-power mode through Input Transition Detection help reduce activity when external logic is idle. The Flash configuration supports repeated in-system or programming-cycle updates.
The ATF16V8BQL architecture supports the common registered, combinatorial, and complex macrocell arrangements used by GAL16V8-class logic. This makes it useful for address decoding, bus qualification, state-machine decoding, latch and flip-flop implementation, and interface control. The -15 speed designation corresponds to a 15 ns device, while the listed maximum pin-to-pin delay for this exact ordering code is 10 ns under the applicable test conditions.
Typical applications include industrial control boards, test and measurement fixtures, peripheral adapters, legacy bus interfaces, printer and scanner controllers, and compact embedded systems that need deterministic combinational or registered logic without adding a microcontroller. The device is particularly useful where a small logic footprint, nonvolatile configuration, and 20-pin PLCC availability matter more than the flexibility of an FPGA.
PCB design should preserve the PLCC footprint, route all supply pins to a stable 5 V rail, and connect programming or test access according to the manufacturer datasheet. Designers replacing a fuse-based GAL16V8 should verify the JEDEC fuse map, macrocell mode, pin assignments, and timing budget before treating a device as a drop-in replacement.
This page combines the device architecture, ordering-code details, practical application guidance, verified same-brand drop-in candidates, and design checks that help engineers determine whether the ATF16V8BQL-15JU can replace a legacy GAL16V8-class implementation.
Bộ thay thế dễ dàng lắp đặt cho ATF16V8BQL-15JU — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATF16V8BQL-15JU (cùng hình factor và footprint) — khác nhau ở Device Type, Package, Architecture, Operating Modes, Macrocells.
ATF16V8B-15JU
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATF16V8C-7JU
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATF16V8CZ-15XC
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ATF16LV8C-10JU
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ATF16V8BQL-15JU Tỷ lệ tối đa & tính chất điện
| Device Type | Electrically erasable simple programmable logic device |
| Architecture | 8 macrocells, registered/combinational/complex modes |
| Logic Capacity | 250 gates |
| Macrocell Count | 8 macrocells |
| Maximum Inputs | Up to 16 inputs |
| I/O Count | 8 I/O outputs |
| Speed Grade | 15 ns |
| Maximum Pin-to-Pin Delay | 10 ns |
| Điện áp cung cấp | 5 V ±10% |
| Technology | CMOS electrically erasable Flash PLD |
| Standby Current | 5 mA typical |
| Low-Power Control | Automatic low-power mode using Input Transition Detection |
| Khoảng nhiệt độ hoạt động | -40 °C to +85 °C |
| Hộp | 20-lead PLCC (9 x 9 mm) |
| Kiểu lắp đặt | Surface mount |
| Package Environmental Designation | Green package |
| Programming Technology | Electrically erasable Flash memory |
| Configuration Persistence | Nonvolatile Flash configuration |
Hướng dẫn cấu hình chân ATF16V8BQL-15JU green package
Cấu hình chân cho ATF16V8BQL-15JU (green package gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATF16V8BQL-15JU.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATF16V8BQL-15JU phù hợp cho 6 Áp dụngs: Legacy GAL16V8 Interface Logic, Industrial Control and Glue Logic, Address and Bus Decoding, Test and Measurement Fixtures, Peripheral and Printer Controllers, Compact Embedded Logic Support.
Legacy GAL16V8 Interface Logic
The ATF16V8BQL-15JU fits legacy GAL16V8-class interface sections that require a small, nonvolatile programmable logic device rather than a microcontroller. Its 8 macrocells, 250-gate capacity, and 20-lead PLCC package support registered, combinatorial, and complex logic arrangements. A designer can use it for address decoding, control-signal qualification, and bus-interface glue logic while retaining the familiar PLCC footprint. The 15 ns speed grade provides a defined timing target for moderate-speed control paths, while the BQL variant adds automatic low-power behavior through Input Transition Detection. Before replacing an existing GAL16V8, verify the JEDEC fuse map, macrocell assignments, and timing at the actual board temperature.
Được đề xuất
Industrial Control and Glue Logic
ATF16V8BQL-15JU is appropriate for industrial control boards that need compact logic for relay sequencing, mode selection, interlocks, and peripheral-command decoding. The device operates across a 4.5 V to 5.5 V supply range and has a specified -40 °C to +85 °C temperature range, matching many legacy 5 V control systems. Its 8 macrocells and 20-lead PLCC package provide a practical upgrade path from hardwired combinational logic because the configuration is stored in nonvolatile Flash and can be changed without replacing the device. The automatic low-power mode is valuable when the controller is active only intermittently, although external loads and pull networks must also be checked for standby-current compatibility.
Được đề xuất
Address and Bus Decoding
The ATF16V8BQL-15JU can implement address decoding, chip-select generation, bus-cycle qualification, and simple protocol state transitions where up to 16 inputs and 8 I/O pins are sufficient. Its 250-gate, 8-macrocell architecture is substantially simpler than an FPGA, reducing configuration, routing, and power overhead for fixed logic functions. The 15 ns speed grade should be checked against address setup, propagation delay, and peripheral access timing at worst-case voltage and temperature. For mixed active-low and active-high controls, use the macrocell configurations documented in the manufacturer datasheet and confirm that every board signal has an unambiguous owner to avoid contention during device programming.
Được đề xuất
Test and Measurement Fixtures
ATF16V8BQL-15JU is useful in test fixtures and measurement adapters where fixed routing, trigger conditioning, or instrument-control signals must be configured without changing discrete logic. The electrically erasable Flash configuration permits design revisions and board-specific routing, while the 20-lead PLCC package supports a conventional socketed or surface-mounted implementation. A 15 ns device can manage moderate-speed control and sequencing paths, but timing-critical trigger chains should be analyzed from the 10 ns maximum pin-to-pin delay specification and the applicable test conditions. The typical 5 mA standby current and automatic low-power mode also help when a fixture is connected but not actively measuring.
Được đề xuất
Peripheral and Printer Controllers
The ATF16V8BQL-15JU fits peripheral controllers that combine command decoding, status generation, and compact state-machine logic in a 5 V system. Its eight macrocells can implement the necessary registered outputs and combinational decode functions without introducing a larger FPGA footprint. The device's nonvolatile Flash configuration is also useful for controllers whose firmware may be updated while the logic personality remains stable. The 15 ns grade should be compared with printer-engine timing, motor-control handshake delays, and the required setup time of connected latches. In systems where the controller sleeps between jobs, Input Transition Detection can reduce logic activity, provided external pull-ups, pull-downs, and driver loads do not dominate standby consumption.
Được đề xuất
Compact Embedded Logic Support
ATF16V8BQL-15JU can support a microcontroller-based system by handling fixed boot decoding, reset qualification, interrupt routing, status-latch functions, and peripheral mode selection. This division of responsibility prevents frequently changed system behavior from consuming microcontroller pins and keeps the programmable logic independently reusable during hardware revisions. The 20-lead PLCC package is useful for both socketed legacy assemblies and compact surface-mount boards, although its footprint is larger than modern fine-pitch packages. Timing margins should include microsecond-level control delays only where required; ordinary logic paths must be compared with the 15 ns grade and 10 ns maximum pin-to-pin delay. Programming access should be designed for reliable recovery in production and field-service workflows.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATF16V8BQL-15JU — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATF16V8B-15JU | ATF16V8C-7JU | ATF16V8CZ-15XC | ATF16LV8C-10JU |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-lead PLCC (9 x 9 mm) | 20-lead PLCC (9 x 9 mm) | 20-lead PLCC (9 x 9 mm) | 20-lead PLCC (9 x 9 mm) | 20-lead PLCC (9 x 9 mm) |
| Speed Grade | 15 ns | 15 ns | 7.5 ns | 15 ns ordering class | 10 ns |
| Configuration Memory | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash |
Bảo phân biệt quan trọng
- Automatic idle-state power reduction (vsATF16V8B-15JU)
- Lower-power architecture at the same nominal speed class (vsATF16V8C-7JU)
- Matches legacy GAL16V8-class implementation scale (vsATF16LV8C-10JU)
Ghi chú thiết kế
Use the 20-lead PLCC land pattern from the manufacturer package drawing and preserve access to the programming interface. Place the device where thermal performance and signal routing are secondary to socket access during legacy repair or production programming. Confirm pin 1 orientation against the package drawing rather than relying on the board legend, especially when an existing GAL16V8 footprint is being reused.
Do not treat a shared PLCC footprint as proof of immediate interchangeability. Compare the ATF16V8BQL fuse map, pin functions, macrocell modes, configuration file, and propagation timing with the installed GAL16V8 or ATF16V8B. Pay particular attention to power pins, output enable behavior, clock polarity, and registered versus combinatorial mode because these differences can create board-level contention even when the physical pin count matches.
Decouple the 5 V supply locally and route the ground connection to the quiet ground plane, following the pin arrangement and capacitor guidance in the manufacturer datasheet. The device's 5 mA typical standby current is only one part of system power, so external pull networks, input pads, and attached logic should also be evaluated. Input Transition Detection can reduce internal activity, but it does not control current drawn by external circuitry.
Keep clock, control, and high-fanout output traces short, and avoid routing them beside noisy power or switching-node traces. The ATF16V8BQL-15JU's 15 ns speed grade is suitable for many moderate-speed control paths, but establish timing margin using the 10 ns maximum pin-to-pin delay specification together with external setup, hold, and skew requirements. Simulate worst-case behavior across the full 4.5 V to 5.5 V supply range.
Thông tin tuân thủ
Microchip identifies the ATF16V8BQL as a Green package, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this ordering code.