Microchip Technology

ATF16V8BQL-15JU - 15 ns Flash PLD | Microchip Logic

N.º de pieza: ATF16V8BQL-15JU ✓ Activo
5 V ±10% Vdss 5 mA typical Id 20-lead PLCC (9 x 9 mm) Package 15 ns Speed
MOQ: 1 |

ATF16V8BQL-15JU Descripción general

The Microchip Technology ATF16V8BQL-15JU is a 5 V CMOS electrically erasable programmable logic device with 8 macrocells, up to 16 inputs, 8 I/O outputs, and a 15 ns speed grade in a 20-lead PLCC (9 x 9 mm) package. It combines a reusable Flash-programmable architecture with edge-sensing low-power operation for compact legacy control, interface, and glue-logic designs.

An electrically erasable PLD is a semiconductor that stores configurable logic functions in nonvolatile memory. It occupies the GAL16V8 and 16R8 design niche while simplifying programming because the configuration can be erased and rewritten instead of relying on one-time-programmable fuse links. In the broader hierarchy, the ATF16V8BQL is a simple PLD, which is a programmable logic device, an FPGA-family implementation using macrocell-based logic rather than a sea of configurable lookup logic.

The device provides 250 logic gates, 8 macrocells, and up to 16 inputs with 8 configurable I/O pins. Its 5 V nominal supply is specified over 5 V ±10% for the industrial speed ranges. A typical low-power standby current of 5 mA and automatic entry into a low-power mode through Input Transition Detection help reduce activity when external logic is idle. The Flash configuration supports repeated in-system or programming-cycle updates.

The ATF16V8BQL architecture supports the common registered, combinatorial, and complex macrocell arrangements used by GAL16V8-class logic. This makes it useful for address decoding, bus qualification, state-machine decoding, latch and flip-flop implementation, and interface control. The -15 speed designation corresponds to a 15 ns device, while the listed maximum pin-to-pin delay for this exact ordering code is 10 ns under the applicable test conditions.

Typical applications include industrial control boards, test and measurement fixtures, peripheral adapters, legacy bus interfaces, printer and scanner controllers, and compact embedded systems that need deterministic combinational or registered logic without adding a microcontroller. The device is particularly useful where a small logic footprint, nonvolatile configuration, and 20-pin PLCC availability matter more than the flexibility of an FPGA.

PCB design should preserve the PLCC footprint, route all supply pins to a stable 5 V rail, and connect programming or test access according to the manufacturer datasheet. Designers replacing a fuse-based GAL16V8 should verify the JEDEC fuse map, macrocell mode, pin assignments, and timing budget before treating a device as a drop-in replacement.

This page combines the device architecture, ordering-code details, practical application guidance, verified same-brand drop-in candidates, and design checks that help engineers determine whether the ATF16V8BQL-15JU can replace a legacy GAL16V8-class implementation.

Alternativas directas para ATF16V8BQL-15JU — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con ATF16V8BQL-15JU (mismo factor de forma y huella) — difiere en Device Type, Package, Architecture, Operating Modes, Macrocells.

Microchip Technology
Device Type: EECMOS erasable programmable logic device (SPLD)
Package: 20-pin PLCC, 9 x 9 mm
Architecture: 16V8
Comparar con ATF16V8BQL-15JU →
Microchip Technology
Device Type: Electrically erasable simple programmable logic device (SPLD)
Package: 20-pin ceramic PLCC, 9 mm x 9 mm
Operating Modes: 3 automatically configured operating modes
Comparar con ATF16V8BQL-15JU →
Microchip Technology
Device Type: 16V8 electrically erasable CMOS programmable logic device
Operating Modes: 3 configurable modes of operation
Macrocells: 8 macrocells
Comparar con ATF16V8BQL-15JU →
Microchip Technology
Device Type: High-performance electrically erasable programmable logic device
Package: 20-pin TSSOP
Architecture: 250-gate EEPLD
Comparar con ATF16V8BQL-15JU →

ATF16V8B-15JU

✅ Sustitución directa
Microchip Technology
📦 20-lead PLCC (9 x 9 mm)
Electrically erasable simple programmable logic device (SPLD) · 5 V · 15 ns · 62 MHz · 250 gates · 8 macrocells · 16 inputs · 8 I/O pins

Consulte el precio

Ver hoja de datos →

ATF16V8C-7JU

✅ Sustitución directa
Microchip Technology
📦 20-lead PLCC (9 x 9 mm)
16V8 electrically erasable CMOS programmable logic device · Simple PLD with 8 macrocells · 8 macrocells · 16 inputs by 8 outputs · EECMOS electrically erasable flash memory · 7 ns · 58.8 MHz · 5 V

Consulte el precio

Ver hoja de datos →

ATF16V8CZ-15XC

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 20-lead PLCC (9 x 9 mm)
High-performance electrically erasable programmable logic device · 250-gate EEPLD · 8 · Up to 16 · 8 · 5 V · 12 ns · 25 uA

Consulte el precio

Ver hoja de datos →

ATF16LV8C-10JU

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 20-lead PLCC (9 x 9 mm)
EECMOS erasable programmable logic device (SPLD) · 16V8 · 8 macrocells · 250 product terms · 10 ns · 3.0 V to 5.25 V · 5 uA · Electrically erasable flash memory based EECMOS

Consulte el precio

Ver hoja de datos →

ATF16V8BQL-15JU Valores máximos y características eléctricas

Device Type Electrically erasable simple programmable logic device
Architecture 8 macrocells, registered/combinational/complex modes
Logic Capacity 250 gates
Macrocell Count 8 macrocells
Maximum Inputs Up to 16 inputs
I/O Count 8 I/O outputs
Speed Grade 15 ns
Maximum Pin-to-Pin Delay 10 ns
Tensión de alimentación 5 V ±10%
Technology CMOS electrically erasable Flash PLD
Standby Current 5 mA typical
Low-Power Control Automatic low-power mode using Input Transition Detection
Rango de temperatura de funcionamiento -40 °C to +85 °C
Encapsulado 20-lead PLCC (9 x 9 mm)
Tipo de montaje Surface mount
Package Environmental Designation Green package
Programming Technology Electrically erasable Flash memory
Configuration Persistence Nonvolatile Flash configuration

Guía de configuración de pines de ATF16V8BQL-15JU green package

Configuración de pines para ATF16V8BQL-15JU (encapsulado green package). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado green package para ATF16V8BQL-15JU

No hay datos detallados de patillaje disponibles para ATF16V8BQL-15JU.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

ATF16V8BQL-15JU es adecuado para 6 aplicacións: Legacy GAL16V8 Interface Logic, Industrial Control and Glue Logic, Address and Bus Decoding, Test and Measurement Fixtures, Peripheral and Printer Controllers, Compact Embedded Logic Support.

🔧

Legacy GAL16V8 Interface Logic

The ATF16V8BQL-15JU fits legacy GAL16V8-class interface sections that require a small, nonvolatile programmable logic device rather than a microcontroller. Its 8 macrocells, 250-gate capacity, and 20-lead PLCC package support registered, combinatorial, and complex logic arrangements. A designer can use it for address decoding, control-signal qualification, and bus-interface glue logic while retaining the familiar PLCC footprint. The 15 ns speed grade provides a defined timing target for moderate-speed control paths, while the BQL variant adds automatic low-power behavior through Input Transition Detection. Before replacing an existing GAL16V8, verify the JEDEC fuse map, macrocell assignments, and timing at the actual board temperature.

🏭

Industrial Control and Glue Logic

ATF16V8BQL-15JU is appropriate for industrial control boards that need compact logic for relay sequencing, mode selection, interlocks, and peripheral-command decoding. The device operates across a 4.5 V to 5.5 V supply range and has a specified -40 °C to +85 °C temperature range, matching many legacy 5 V control systems. Its 8 macrocells and 20-lead PLCC package provide a practical upgrade path from hardwired combinational logic because the configuration is stored in nonvolatile Flash and can be changed without replacing the device. The automatic low-power mode is valuable when the controller is active only intermittently, although external loads and pull networks must also be checked for standby-current compatibility.

🖥️

Address and Bus Decoding

The ATF16V8BQL-15JU can implement address decoding, chip-select generation, bus-cycle qualification, and simple protocol state transitions where up to 16 inputs and 8 I/O pins are sufficient. Its 250-gate, 8-macrocell architecture is substantially simpler than an FPGA, reducing configuration, routing, and power overhead for fixed logic functions. The 15 ns speed grade should be checked against address setup, propagation delay, and peripheral access timing at worst-case voltage and temperature. For mixed active-low and active-high controls, use the macrocell configurations documented in the manufacturer datasheet and confirm that every board signal has an unambiguous owner to avoid contention during device programming.

🔧

Test and Measurement Fixtures

ATF16V8BQL-15JU is useful in test fixtures and measurement adapters where fixed routing, trigger conditioning, or instrument-control signals must be configured without changing discrete logic. The electrically erasable Flash configuration permits design revisions and board-specific routing, while the 20-lead PLCC package supports a conventional socketed or surface-mounted implementation. A 15 ns device can manage moderate-speed control and sequencing paths, but timing-critical trigger chains should be analyzed from the 10 ns maximum pin-to-pin delay specification and the applicable test conditions. The typical 5 mA standby current and automatic low-power mode also help when a fixture is connected but not actively measuring.

📺

Peripheral and Printer Controllers

The ATF16V8BQL-15JU fits peripheral controllers that combine command decoding, status generation, and compact state-machine logic in a 5 V system. Its eight macrocells can implement the necessary registered outputs and combinational decode functions without introducing a larger FPGA footprint. The device's nonvolatile Flash configuration is also useful for controllers whose firmware may be updated while the logic personality remains stable. The 15 ns grade should be compared with printer-engine timing, motor-control handshake delays, and the required setup time of connected latches. In systems where the controller sleeps between jobs, Input Transition Detection can reduce logic activity, provided external pull-ups, pull-downs, and driver loads do not dominate standby consumption.

🧩

Compact Embedded Logic Support

ATF16V8BQL-15JU can support a microcontroller-based system by handling fixed boot decoding, reset qualification, interrupt routing, status-latch functions, and peripheral mode selection. This division of responsibility prevents frequently changed system behavior from consuming microcontroller pins and keeps the programmable logic independently reusable during hardware revisions. The 20-lead PLCC package is useful for both socketed legacy assemblies and compact surface-mount boards, although its footprint is larger than modern fine-pitch packages. Timing margins should include microsecond-level control delays only where required; ordinary logic paths must be compared with the 15 ns grade and 10 ns maximum pin-to-pin delay. Programming access should be designed for reliable recovery in production and field-service workflows.

What is the ATF16V8BQL-15JU?
The ATF16V8BQL-15JU is a Microchip Technology 5 V electrically erasable Flash programmable logic device with 8 macrocells, up to 16 inputs, 8 I/O outputs, and a 15 ns speed grade. According to the Microchip product page and manufacturer datasheet, it is intended for compact combinational, registered, and complex logic implementations in a 20-lead PLCC package.
What is the operating voltage of the ATF16V8BQL-15JU?
The ATF16V8BQL-15JU operates from 4.5 V to 5.5 V, corresponding to a nominal 5 V supply with ±10% tolerance. The manufacturer datasheet states that the speed ranges are specified over this full supply range, so a regulated 5 V rail with normal industrial supply tolerance is required for guaranteed timing.
What is the ATF16V8BQL-15JU pinout?
The ATF16V8BQL-15JU uses a 20-lead PLCC footprint and exposes the standard ATF16V8B-style pin assignments for power, ground, clock, control, inputs, and configurable I/O pins. Use the pin-description and package drawings in the Microchip manufacturer datasheet when assigning PCB tracks; the verified product information confirms the 20-PLCC configuration.
Where can I download the ATF16V8BQL-15JU datasheet PDF?
The official ATF16V8B(BQ)(BQL) datasheet PDF is available from Microchip Technology. It covers the electrically erasable Flash architecture, macrocell configurations, electrical characteristics, programming information, low-power behavior, and package details needed to evaluate the ATF16V8BQL-15JU.
How many gates and macrocells does the ATF16V8BQL-15JU contain?
The ATF16V8BQL-15JU contains 8 macrocells and provides a 250-gate logic capacity. The Microchip product page identifies up to 16 inputs and 8 I/O outputs, making the device suitable for GAL16V8-class address decoding, bus control, state decoding, and general glue logic.
Is the ATF16V8BQL-15JU suitable for low-power designs?
Yes. The ATF16V8BQL-15JU is designed for low-power operation and has a typical standby current of 5 mA. Its Input Transition Detection circuitry automatically powers the device down into a low-power mode when inputs are idle, making it useful in legacy control systems where continuously switching logic would increase overall power consumption.
ATF16V8BQL-15JU vs ATF16V8B-15JU: which one should be selected?
The ATF16V8BQL-15JU is the low-power BQL implementation, while ATF16V8B-15JU is the earlier B-series device. Both are 5 V, 8-macrocell, 20-lead PLCC Flash PLDs, but the BQL version adds automatic Input Transition Detection low-power behavior. Choose BQL when idle-state power reduction is valuable and confirm the required programming and timing details before interchange.
When should I choose ATF16V8BQL-15JU over ATF16V8C-7JU?
Choose ATF16V8BQL-15JU when 15 ns performance is sufficient and automatic low-power operation is valuable. Choose ATF16V8C-7JU when the design needs its listed 7.5 ns speed. Both provide 8 macrocells in a 20-lead PLCC package, but the faster device generally provides less timing margin for long combinational paths and critical interface timing.
Is ATF16V8BQL-15JU suitable for industrial legacy control systems?
The ATF16V8BQL-15JU is suitable for industrial legacy-control applications that require nonvolatile programmable logic. The manufacturer information specifies a -40 °C to +85 °C operating range and a 4.5 V to 5.5 V supply range. Its edge-sensing low-power architecture is especially useful in legacy boards that cannot justify replacing a small GAL16V8-class logic section with a microcontroller.
What is the best drop-in replacement for ATF16V8BQL-15JU?
ATF16V8B-15JU is the closest same-brand 20-PLCC candidate because it retains the 5 V, 8-macrocell, 15 ns class and Flash-programmable architecture. A true drop-in decision still requires checking the JEDEC fuse map, power pins, macrocell modes, and timing constraints in the manufacturer datasheet; changing only the ordering suffix does not automatically validate every legacy design.
Can ATF16V8C-7JU replace ATF16V8BQL-15JU?
ATF16V8C-7JU can be considered as a same-footprint 20-PLCC candidate, with 8 macrocells and a listed 7.5 ns speed compared with the target's 15 ns grade. Its faster timing is favorable, but low-power behavior, programming support, pin functionality, and the legacy fuse map must be verified before treating it as a drop-in replacement.
What are the key specifications engineers should know about ATF16V8BQL-15JU?
The principal ATF16V8BQL-15JU specifications are a 5 V ±10% supply, 8 macrocells, 250 gates, up to 16 inputs, 8 I/O outputs, a 15 ns speed grade, and a 20-lead PLCC package. The Microchip datasheet also identifies electrically erasable Flash configuration, typical 5 mA standby current, automatic Input Transition Detection shutdown, and an industrial temperature range of -40 °C to +85 °C.
Where can I buy ATF16V8BQL-15JU and check its lead time?
Use the Request a Quote form on this page to request current ATF16V8BQL-15JU availability, commercial terms, and lead time. The request should specify the exact 20-PLCC ordering code ATF16V8BQL-15JU so the quote is not confused with PDIP, TSSOP, speed-grade, or other package variants.
What is the price of ATF16V8BQL-15JU?
The current commercial price for ATF16V8BQL-15JU should be obtained through the Request a Quote form on this page. Quote requests should identify the exact 20-lead PLCC ordering code, target quantity, acceptable delivery date, and whether factory programming is required.
Is ATF16V8BQL-15JU currently in stock?
Use the Request a Quote form on this page for the latest ATF16V8BQL-15JU stock position, including scheduled delivery and factory allocation information. Stock status can vary by package, quantity, and programming requirement, so a response for the exact ordering code is more useful than a generic PLCC availability statement.

Datos de referencia de ingeniería para ATF16V8BQL-15JU — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose ATF16V8BQL-15JU for a 5 V legacy-control or interface design that needs 8 macrocells in a 20-lead PLCC package and benefits from automatic low-power operation. Its 15 ns grade is appropriate when address decoding, bus qualification, peripheral control, or general glue logic does not require faster switching. ATF16V8B-15JU is the closest architectural alternative when the same speed, macrocell count, and package are required but automatic idle-state power reduction is unnecessary. ATF16V8C-7JU is preferable for timing-critical paths because its listed 7.5 ns speed provides greater timing margin, subject to confirming programming and macrocell compatibility. ATF16V8CZ-15XC and ATF16LV8C-10JU may suit established legacy platforms, but their fuse maps, low-power characteristics, and exact I/O behavior should be checked in the manufacturer datasheet. For every candidate, verify supply pins, JEDEC fuse map, macrocell assignments, programming method, and worst-case timing before approving a drop-in substitution.

Comparación con alternativas

Parámetro Este producto ATF16V8B-15JU ATF16V8C-7JU ATF16V8CZ-15XC ATF16LV8C-10JU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-lead PLCC (9 x 9 mm) 20-lead PLCC (9 x 9 mm) 20-lead PLCC (9 x 9 mm) 20-lead PLCC (9 x 9 mm) 20-lead PLCC (9 x 9 mm)
Speed Grade 15 ns 15 ns 7.5 ns 15 ns ordering class 10 ns
Configuration Memory Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash

Diferenciadores clave

  • Automatic idle-state power reduction (frente a ATF16V8B-15JU)
  • Lower-power architecture at the same nominal speed class (frente a ATF16V8C-7JU)
  • Matches legacy GAL16V8-class implementation scale (frente a ATF16LV8C-10JU)

Notas de diseño

Use the 20-lead PLCC land pattern from the manufacturer package drawing and preserve access to the programming interface. Place the device where thermal performance and signal routing are secondary to socket access during legacy repair or production programming. Confirm pin 1 orientation against the package drawing rather than relying on the board legend, especially when an existing GAL16V8 footprint is being reused.

Do not treat a shared PLCC footprint as proof of immediate interchangeability. Compare the ATF16V8BQL fuse map, pin functions, macrocell modes, configuration file, and propagation timing with the installed GAL16V8 or ATF16V8B. Pay particular attention to power pins, output enable behavior, clock polarity, and registered versus combinatorial mode because these differences can create board-level contention even when the physical pin count matches.

Decouple the 5 V supply locally and route the ground connection to the quiet ground plane, following the pin arrangement and capacitor guidance in the manufacturer datasheet. The device's 5 mA typical standby current is only one part of system power, so external pull networks, input pads, and attached logic should also be evaluated. Input Transition Detection can reduce internal activity, but it does not control current drawn by external circuitry.

Keep clock, control, and high-fanout output traces short, and avoid routing them beside noisy power or switching-node traces. The ATF16V8BQL-15JU's 15 ns speed grade is suitable for many moderate-speed control paths, but establish timing margin using the 10 ns maximum pin-to-pin delay specification together with external setup, hold, and skew requirements. Simulate worst-case behavior across the full 4.5 V to 5.5 V supply range.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Microchip identifies the ATF16V8BQL as a Green package, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this ordering code.

Datos verificados el: 2026-11-17 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

atf16v8bql datasheet atf16v8bql 15pu datasheet atmel atf16v8bql ATF16V8BQL-15JU datasheet pdf ATF16V8BQL-15JU pinout ATF16V8BQL-15JU PLCC footprint ATF16V8BQL-15JU 8 macrocell ATF16V8BQL-15JU 15 ns ATF16V8BQL-15JU equivalent ATF16V8BQL-15JU replacement ATF16V8BQL-15JU vs ATF16V8C-7JU ATF16V8BQL-15JU price ATF16V8BQL-15JU stock ATF16V8BQL low power PLD ATF16V8BQL legacy GAL16V8 replacement

Componentes & términos relacionados

Microchip Technology Atmel ATF16V8BQL-15JU ATF16V8BQL ATF16V8B-15JU ATF16V8C-7JU ATF16V8CZ-15XC ATF16LV8C-10JU Electrically Erasable Programmable Logic Device EEPLD Simple PLD SPLD GAL16V8 CMOS Flash memory Macrocells 20-lead PLCC PLCC package family Surface-mount package Input Transition Detection Low-power mode 5 V power supply 15 ns speed grade Combinational logic Registered logic
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ