ATF16V8BQL-15JU - 15 ns Flash PLD | Microchip Logic
부품 번호: ATF16V8BQL-15JU ✓ 활성ATF16V8BQL-15JU 개요
An electrically erasable PLD is a semiconductor that stores configurable logic functions in nonvolatile memory. It occupies the GAL16V8 and 16R8 design niche while simplifying programming because the configuration can be erased and rewritten instead of relying on one-time-programmable fuse links. In the broader hierarchy, the ATF16V8BQL is a simple PLD, which is a programmable logic device, an FPGA-family implementation using macrocell-based logic rather than a sea of configurable lookup logic.
The device provides 250 logic gates, 8 macrocells, and up to 16 inputs with 8 configurable I/O pins. Its 5 V nominal supply is specified over 5 V ±10% for the industrial speed ranges. A typical low-power standby current of 5 mA and automatic entry into a low-power mode through Input Transition Detection help reduce activity when external logic is idle. The Flash configuration supports repeated in-system or programming-cycle updates.
The ATF16V8BQL architecture supports the common registered, combinatorial, and complex macrocell arrangements used by GAL16V8-class logic. This makes it useful for address decoding, bus qualification, state-machine decoding, latch and flip-flop implementation, and interface control. The -15 speed designation corresponds to a 15 ns device, while the listed maximum pin-to-pin delay for this exact ordering code is 10 ns under the applicable test conditions.
Typical applications include industrial control boards, test and measurement fixtures, peripheral adapters, legacy bus interfaces, printer and scanner controllers, and compact embedded systems that need deterministic combinational or registered logic without adding a microcontroller. The device is particularly useful where a small logic footprint, nonvolatile configuration, and 20-pin PLCC availability matter more than the flexibility of an FPGA.
PCB design should preserve the PLCC footprint, route all supply pins to a stable 5 V rail, and connect programming or test access according to the manufacturer datasheet. Designers replacing a fuse-based GAL16V8 should verify the JEDEC fuse map, macrocell mode, pin assignments, and timing budget before treating a device as a drop-in replacement.
This page combines the device architecture, ordering-code details, practical application guidance, verified same-brand drop-in candidates, and design checks that help engineers determine whether the ATF16V8BQL-15JU can replace a legacy GAL16V8-class implementation.
드롭인 대체품: ATF16V8BQL-15JU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATF16V8BQL-15JU (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Package, Architecture, Operating Modes, Macrocells.
ATF16V8B-15JU
✅ 드롭인가격 문의
데이터시트 보기 →ATF16V8C-7JU
✅ 드롭인가격 문의
데이터시트 보기 →ATF16V8CZ-15XC
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →ATF16LV8C-10JU
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →ATF16V8BQL-15JU 최대 정격 & 전기적 특성
| Device Type | Electrically erasable simple programmable logic device |
| Architecture | 8 macrocells, registered/combinational/complex modes |
| Logic Capacity | 250 gates |
| Macrocell Count | 8 macrocells |
| Maximum Inputs | Up to 16 inputs |
| I/O Count | 8 I/O outputs |
| Speed Grade | 15 ns |
| Maximum Pin-to-Pin Delay | 10 ns |
| 공급 전압 | 5 V ±10% |
| Technology | CMOS electrically erasable Flash PLD |
| Standby Current | 5 mA typical |
| Low-Power Control | Automatic low-power mode using Input Transition Detection |
| 동작 온도 범위 | -40 °C to +85 °C |
| 패키지 | 20-lead PLCC (9 x 9 mm) |
| 실장 유형 | Surface mount |
| Package Environmental Designation | Green package |
| Programming Technology | Electrically erasable Flash memory |
| Configuration Persistence | Nonvolatile Flash configuration |
ATF16V8BQL-15JU green package 핀 구성 가이드
ATF16V8BQL-15JU(green package 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATF16V8BQL-15JU.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATF16V8BQL-15JU 적합 용도: 6 애플리케이션s: Legacy GAL16V8 Interface Logic, Industrial Control and Glue Logic, Address and Bus Decoding, Test and Measurement Fixtures, Peripheral and Printer Controllers, Compact Embedded Logic Support.
Legacy GAL16V8 Interface Logic
The ATF16V8BQL-15JU fits legacy GAL16V8-class interface sections that require a small, nonvolatile programmable logic device rather than a microcontroller. Its 8 macrocells, 250-gate capacity, and 20-lead PLCC package support registered, combinatorial, and complex logic arrangements. A designer can use it for address decoding, control-signal qualification, and bus-interface glue logic while retaining the familiar PLCC footprint. The 15 ns speed grade provides a defined timing target for moderate-speed control paths, while the BQL variant adds automatic low-power behavior through Input Transition Detection. Before replacing an existing GAL16V8, verify the JEDEC fuse map, macrocell assignments, and timing at the actual board temperature.
추천
Industrial Control and Glue Logic
ATF16V8BQL-15JU is appropriate for industrial control boards that need compact logic for relay sequencing, mode selection, interlocks, and peripheral-command decoding. The device operates across a 4.5 V to 5.5 V supply range and has a specified -40 °C to +85 °C temperature range, matching many legacy 5 V control systems. Its 8 macrocells and 20-lead PLCC package provide a practical upgrade path from hardwired combinational logic because the configuration is stored in nonvolatile Flash and can be changed without replacing the device. The automatic low-power mode is valuable when the controller is active only intermittently, although external loads and pull networks must also be checked for standby-current compatibility.
추천
Address and Bus Decoding
The ATF16V8BQL-15JU can implement address decoding, chip-select generation, bus-cycle qualification, and simple protocol state transitions where up to 16 inputs and 8 I/O pins are sufficient. Its 250-gate, 8-macrocell architecture is substantially simpler than an FPGA, reducing configuration, routing, and power overhead for fixed logic functions. The 15 ns speed grade should be checked against address setup, propagation delay, and peripheral access timing at worst-case voltage and temperature. For mixed active-low and active-high controls, use the macrocell configurations documented in the manufacturer datasheet and confirm that every board signal has an unambiguous owner to avoid contention during device programming.
추천
Test and Measurement Fixtures
ATF16V8BQL-15JU is useful in test fixtures and measurement adapters where fixed routing, trigger conditioning, or instrument-control signals must be configured without changing discrete logic. The electrically erasable Flash configuration permits design revisions and board-specific routing, while the 20-lead PLCC package supports a conventional socketed or surface-mounted implementation. A 15 ns device can manage moderate-speed control and sequencing paths, but timing-critical trigger chains should be analyzed from the 10 ns maximum pin-to-pin delay specification and the applicable test conditions. The typical 5 mA standby current and automatic low-power mode also help when a fixture is connected but not actively measuring.
추천
Peripheral and Printer Controllers
The ATF16V8BQL-15JU fits peripheral controllers that combine command decoding, status generation, and compact state-machine logic in a 5 V system. Its eight macrocells can implement the necessary registered outputs and combinational decode functions without introducing a larger FPGA footprint. The device's nonvolatile Flash configuration is also useful for controllers whose firmware may be updated while the logic personality remains stable. The 15 ns grade should be compared with printer-engine timing, motor-control handshake delays, and the required setup time of connected latches. In systems where the controller sleeps between jobs, Input Transition Detection can reduce logic activity, provided external pull-ups, pull-downs, and driver loads do not dominate standby consumption.
추천
Compact Embedded Logic Support
ATF16V8BQL-15JU can support a microcontroller-based system by handling fixed boot decoding, reset qualification, interrupt routing, status-latch functions, and peripheral mode selection. This division of responsibility prevents frequently changed system behavior from consuming microcontroller pins and keeps the programmable logic independently reusable during hardware revisions. The 20-lead PLCC package is useful for both socketed legacy assemblies and compact surface-mount boards, although its footprint is larger than modern fine-pitch packages. Timing margins should include microsecond-level control delays only where required; ordinary logic paths must be compared with the 15 ns grade and 10 ns maximum pin-to-pin delay. Programming access should be designed for reliable recovery in production and field-service workflows.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATF16V8BQL-15JU — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATF16V8B-15JU | ATF16V8C-7JU | ATF16V8CZ-15XC | ATF16LV8C-10JU |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-lead PLCC (9 x 9 mm) | 20-lead PLCC (9 x 9 mm) | 20-lead PLCC (9 x 9 mm) | 20-lead PLCC (9 x 9 mm) | 20-lead PLCC (9 x 9 mm) |
| Speed Grade | 15 ns | 15 ns | 7.5 ns | 15 ns ordering class | 10 ns |
| Configuration Memory | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash |
주요 차별점
- Automatic idle-state power reduction (vs ATF16V8B-15JU)
- Lower-power architecture at the same nominal speed class (vs ATF16V8C-7JU)
- Matches legacy GAL16V8-class implementation scale (vs ATF16LV8C-10JU)
설계 노트
Use the 20-lead PLCC land pattern from the manufacturer package drawing and preserve access to the programming interface. Place the device where thermal performance and signal routing are secondary to socket access during legacy repair or production programming. Confirm pin 1 orientation against the package drawing rather than relying on the board legend, especially when an existing GAL16V8 footprint is being reused.
Do not treat a shared PLCC footprint as proof of immediate interchangeability. Compare the ATF16V8BQL fuse map, pin functions, macrocell modes, configuration file, and propagation timing with the installed GAL16V8 or ATF16V8B. Pay particular attention to power pins, output enable behavior, clock polarity, and registered versus combinatorial mode because these differences can create board-level contention even when the physical pin count matches.
Decouple the 5 V supply locally and route the ground connection to the quiet ground plane, following the pin arrangement and capacitor guidance in the manufacturer datasheet. The device's 5 mA typical standby current is only one part of system power, so external pull networks, input pads, and attached logic should also be evaluated. Input Transition Detection can reduce internal activity, but it does not control current drawn by external circuitry.
Keep clock, control, and high-fanout output traces short, and avoid routing them beside noisy power or switching-node traces. The ATF16V8BQL-15JU's 15 ns speed grade is suitable for many moderate-speed control paths, but establish timing margin using the 10 ns maximum pin-to-pin delay specification together with external setup, hold, and skew requirements. Simulate worst-case behavior across the full 4.5 V to 5.5 V supply range.
규정 준수 정보
Microchip identifies the ATF16V8BQL as a Green package, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this ordering code.