Microchip Technology

ATF22V10BQL-20JC - 20ns Flash PLD | Microchip Technology

MPN: ATF22V10BQL-20JC ✗ Cuối đời
5 V Vdss 28-pin PLCC, 11.51 mm × 11.51 mm Package Down to 7.5 ns Speed
MOQ: 1 |

ATF22V10BQL-20JC Tóm tắt

The Microchip Technology ATF22V10BQL-20JC is a 22V10 electrically erasable CMOS programmable logic device with 10 macrocells, approximately 500 gates, and a 20 ns speed grade in a 28-pin PLCC package. It operates from a nominal 5 V supply and uses electrically erasable Flash memory for in-circuit reprogramming. The device is designed for compact logic control, interface decoding, state-machine implementation, and replacement of conventional GAL-type combinational or registered logic.

A simple programmable logic device, or SPLD, is a programmable-logic-device category within the broader integrated-circuit hierarchy. SPLDs combine AND-array and OR-array logic into a small number of macrocells. Compared with a mask-programmed PLD, an electrically erasable SPLD permits design revisions without changing the integrated circuit or PCB artwork. The ATF22V10B therefore supports prototype iteration, field upgrades, and configurable control logic in systems where gate count and propagation delay are more important than very high I/O density.

The ATF22V10B family provides reprogrammable Flash configuration, 100% tested high-reliability CMOS circuitry, and 20-year data retention. The manufacturer lists operating speeds down to 7.5 ns across the family, while the ATF22V10BQL-20JC suffix identifies the 20 ns commercial-temperature configuration. Power dissipation can be as low as 10 mA in the family description. The device also includes 2,000 V ESD protection and 200 mA latch-up immunity according to the family datasheet information.

Technically, the ATF22V10B combines ten configurable macrocells with Flash-programmed logic equations. This architecture allows each macrocell to participate in sum-of-products logic, registered state-machine functions, or both, depending on the programmed fuse configuration. A 20 ns propagation delay provides useful timing margin in control, decoder, and asynchronous interface circuits, while the 5 V operating point remains compatible with conventional 5 V logic systems.

Typical uses include industrial control logic, telecommunications status decoding, peripheral-interface control, test-equipment sequencing, and compact glue-logic implementations. The 28-pin PLCC footprint is especially relevant to designs that need a socketed or legacy-compatible logic package rather than a high-density FPGA. Designers should confirm device programming, pin definitions, and timing against the manufacturer datasheet before treating the part as a modern drop-in replacement for another SPLD family.

The most important layout consideration is access to the programming interface and the PLCC footprint. Preserve clearances around the package, follow the manufacturer pin-definition table, and provide stable supply decoupling close to the power and ground pins. Because device speed and temperature grades are encoded in the suffix, verify the complete ordering code rather than substituting only the base ATF22V10B designation.

This page consolidates the manufacturer family specifications, exact-package information, programming and lifecycle considerations, verified drop-in references, and practical design guidance into a single engineering view for the ATF22V10BQL-20JC.

Bộ thay thế dễ dàng lắp đặt cho ATF22V10BQL-20JC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATF22V10BQL-20JC (cùng hình factor và footprint) — khác nhau ở Device Type, Package, Mounting Type, Programmable Technology.

Microchip Technology
Device Type: Electrically erasable CMOS programmable logic device
Package: 28-pin PLCC, 11.51 x 11.51 mm
Mounting Type: Surface mount
So sánh với ATF22V10BQL-20JC →
Microchip Technology
Device Type: High-performance electrically erasable CMOS programmable logic device
Package: 28-pin PLCC, 11.51 mm x 11.51 mm
Mounting Type: Surface mount
So sánh với ATF22V10BQL-20JC →
Microchip Technology
Device Type: Simple programmable logic device (SPLD)
Package: 28-PLCC (11.51 mm x 11.51 mm)
Mounting Type: Through-hole surface-mount-compatible PLCC
So sánh với ATF22V10BQL-20JC →

ATF22V10BQL-20JI

✅ Drop-In
📦 28-pin PLCC
Same 10-macrocell, 20 ns Flash SPLD architecture and 28-pin PLCC footprint; industrial-temperature suffix replaces the target's commercial-temperature grade.

📋 Tham chiếu thay thế (không có trong danh mục)

ATF22V10CQZ-20JC

✅ Drop-In
Microchip Technology
📦 28-pin PLCC
Electrically erasable CMOS programmable logic device · ATF22V10 · Industry-standard 22V10 architecture · 10 macrocells · 20 ns · 12 ns · Electrically erasable flash memory · Yes

Liên hệ để biết giá

Xem tài liệu →

ATF22V10CQZ-20JI

✅ Drop-In
Microchip Technology
📦 28-pin PLCC
High-performance electrically erasable CMOS programmable logic device · EPLD · 10 macrocells · 500 gates · 20 ns · 50 MHz · 5 V · 10 I/O pins

Liên hệ để biết giá

Xem tài liệu →

ATF22V10CQZ-20JU

✅ Drop-In
Microchip Technology
📦 28-pin PLCC
Simple programmable logic device (SPLD) · Electrically erasable CMOS flash memory · 20 ns · 10 macrocells · 28 I/O pins · 10 registers · 500 gates · 50 MHz

Liên hệ để biết giá

Xem tài liệu →

ATF22V10BQL-20JU

✅ Drop-In
📦 28-pin PLCC
Same BQL 22V10 architecture, 10 macrocells, 20 ns grade, and 28-pin PLCC footprint; -20JU temperature ordering replaces the target's -20JC suffix.

📋 Tham chiếu thay thế (không có trong danh mục)

ATF22V10BQL-20JC Tỷ lệ tối đa & tính chất điện

Device Type 22V10 electrically erasable CMOS programmable logic device
Configuration Technology Electrically erasable Flash memory
Number of Macrocells 10 macrocells
Approximate Gate Count 500 gates
Target Propagation Delay 20 ns
Family Maximum Speed Down to 7.5 ns
Nominal Supply Voltage 5 V
Commercial Supply Tolerance 5 V ± 5%
Family Industrial Supply Tolerance 5 V ± 10%
Minimum Power Dissipation 10 mA
Data Retention 20 years
Erase and Write Cycle Endurance 100 cycles
ESD Protection 2,000 V
Latch-Up Immunity 200 mA
Hộp 28-pin PLCC, 11.51 mm × 11.51 mm
Temperature Grade Commercial
Terminal Form J-bend
Trạng thái RoHS Non-compliant
Reprogrammability Reprogrammable

Hướng dẫn cấu hình chân ATF22V10BQL-20JC 28-pin plcc, 11.51 mm × 11.51 mm

Cấu hình chân cho ATF22V10BQL-20JC (28-pin plcc, 11.51 mm × 11.51 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 28-pin plcc, 11.51 mm × 11.51 mm cho ATF22V10BQL-20JC

Không có dữ liệu chân cụ thể sẵn có cho ATF22V10BQL-20JC.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ATF22V10BQL-20JC phù hợp cho 6 Áp dụngs: Industrial Control Logic, Telecommunications Status Decoding, Peripheral Interface Control, Test and Measurement Sequencing, Embedded System State Machine, Legacy Interface and Bus Control.

🏭

Industrial Control Logic

The ATF22V10BQL-20JC is suitable for compact sequencing, interlock, and command-decoding logic in nominal 5 V industrial control equipment. Ten Flash-programmable macrocells and approximately 500 gates provide enough capacity for state-machine and combinational functions, while the 20 ns propagation-delay grade introduces useful timing margin relative to faster ATF22V10B options. The 28-pin PLCC package also supports socketed serviceable control boards. Because the -20JC ordering code is commercial-temperature, equipment requiring a wider environmental range should use the corresponding industrial-temperature suffix and confirm the operating-temperature limits in the manufacturer datasheet.

🌐

Telecommunications Status Decoding

The ATF22V10BQL-20JC can implement status decoding, alarm-latch, and routing logic in 5 V telecommunications line-card or interface equipment. Its electrically erasable Flash configuration supports design revisions without package replacement, and the 10-macrocell architecture allows several related Boolean equations to be consolidated into one device. The approximately 500-gate capacity is appropriate for moderate glue logic rather than high-density interface synthesis. In a rack-mounted system, the commercial-temperature ordering code may be acceptable in controlled indoor spaces, but it should not be selected for outdoor or extended-temperature locations without checking an appropriate temperature-grade variant.

🔧

Peripheral Interface Control

The ATF22V10BQL-20JC is useful for legacy peripheral-interface control where simple address decode, interrupt qualification, or command sequencing must be added to a 5 V system. Ten macrocells can divide a larger Boolean function into multiple sum-of-products terms, and the electrically erasable Flash configuration allows a corrected interface map to be programmed during production or service. The 20 ns grade can support moderate handshake and decode timing without requiring the fastest family speed. Engineers should verify every macrocell's registered or combinational behavior against the programming model and confirm pin multiplexing in the manufacturer's pin-description table.

⚡

Test and Measurement Sequencing

The ATF22V10BQL-20JC can implement control sequencing for test and measurement equipment where front-panel commands must be decoded and routed to internal subsystems. Its approximately 500-gate capacity is suited to moderate Boolean control rather than complex digital signal processing, and the 20 ns delay provides deterministic response for routine command paths. Electrically erasable Flash memory permits repeatable programming of the same device family for different fixture configurations. Use the PLCC package where a socketed or replacement-friendly assembly is valuable, and test the programmed configuration across expected supply and temperature conditions before field deployment.

🧩

Embedded System State Machine

The ATF22V10BQL-20JC can implement a small state machine for reset sequencing, mode selection, watchdog handling, or peripheral enable generation in a 5 V embedded assembly. Its macrocells support registered logic, allowing state variables and transition equations to be consolidated instead of using several separate latch and gate packages. The ATF22V10B family also specifies 20-year data retention, which supports stable configuration storage over long product lifetimes. Because the device is electrically erasable rather than mask-programmed, the logic can be revised during qualification. Validate setup and hold requirements, clock behavior, and programming-file reproducibility against the manufacturer timing information.

🖥️

Legacy Interface and Bus Control

The ATF22V10BQL-20JC is a practical choice for legacy bus-control and interface arbitration in systems using 5 V TTL signals. Ten macrocells and approximately 500 gates can implement address qualification, command decoding, and simple arbitration without a larger FPGA. The 20 ns propagation-delay grade is appropriate for conventional asynchronous control paths where deterministic delay is useful but maximum throughput is not required. Its 28-pin PLCC footprint makes it especially useful when maintaining older socketed or leaded-logic boards. A replacement should not be approved solely from package dimensions; pin names, power rails, macrocell behavior, and programming architecture must also match.

What is ATF22V10BQL-20JC?
The ATF22V10BQL-20JC is a Microchip Technology 22V10 electrically erasable CMOS programmable logic device with 10 macrocells, approximately 500 gates, a 20 ns propagation-delay grade, and a 28-pin PLCC package. According to the Microchip ATF22V10B datasheet, it uses electrically erasable Flash memory, making the configured logic reprogrammable without replacing the device.
What are the key specifications of ATF22V10BQL-20JC that engineers should know?
The ATF22V10BQL-20JC combines 10 macrocells, about 500 gates, a nominal 5 V supply, and a 20 ns propagation-delay grade in a 28-pin PLCC package. The ATF22V10B family also offers speeds down to 7.5 ns, power dissipation as low as 10 mA, 20-year data retention, and electrically erasable Flash configuration. These characteristics position it for compact, reprogrammable industrial and telecommunications control logic.
Where can I download the ATF22V10BQL-20JC datasheet PDF?
The ATF22V10BQL-20JC datasheet is available through the official Microchip ATF22V10B family document at https://www.microchip.com/content/dam/mchp/documents/OTH/ProductDocuments/DataSheets/doc0250.pdf. Use the manufacturer PDF for the authoritative pin descriptions, electrical characteristics, macrocell behavior, programming information, and package drawings. The exact ordering-code suffix should be checked against the ordering-information section.
Where can I find the ATF22V10BQL-20JC pinout?
The ATF22V10BQL-20JC uses a 28-pin PLCC package, and its complete pin descriptions are listed in the manufacturer ATF22V10B datasheet. The package has 28 terminals arranged according to the PLCC footprint, including the power, ground, clock, input, and configurable macrocell signals. Before assigning PCB tracks or programming the device, verify every pin against the pin-description and package drawings in the official document.
What does the 20 in ATF22V10BQL-20JC mean?
The 20 ns designation in ATF22V10BQL-20JC identifies the device's propagation-delay speed grade. It provides a slower alternative to the fastest 7.5 ns ATF22V10B configurations while retaining the same 10-macrocell, approximately 500-gate device architecture. The 20 ns grade is appropriate when additional timing margin is preferable to maximum operating speed for a compact logic implementation.
Is ATF22V10BQL-20JC suitable for industrial control applications?
The ATF22V10BQL-20JC is identified as a commercial-temperature configuration, while the ATF22V10B family supports commercial, industrial, and military temperature ranges. It can implement compact control logic for nominal 5 V systems, but applications requiring the industrial temperature grade should use the corresponding industrial ordering code. The manufacturer datasheet should be consulted for the complete operating-temperature limits.
Is ATF22V10BQL-20JC in stock?
Current inventory and delivery status can change for legacy programmable-logic devices, so use the Request a Quote form on this page for an availability check and a manufacturing plan. The ATF22V10B family has a long-established Flash-programmable architecture, but the availability of a specific package, temperature grade, and programmed configuration should be confirmed before committing to a production schedule.
What is the price of ATF22V10BQL-20JC?
The ATF22V10BQL-20JC is a legacy programmable-logic part, and its commercial price depends on quantity, package condition, programming requirements, and current supply. Request the current unit and volume pricing through the Request a Quote form on this page. The form allows the required package suffix, programmed or unprogrammed status, and production quantity to be reviewed before an order is placed.
What is the lead time for ATF22V10BQL-20JC?
The current lead time should be confirmed through the Request a Quote form on this page because it depends on exact MPN matching, programmed configuration, quantity, and current supply status. Provide the unprogrammed part number ATF22V10BQL-20JC when requesting standard-device pricing. If the design requires a programmed fuse configuration, include that file and its revision with the request.
What can replace ATF22V10BQL-20JC?
ATF22V10CQZ-20JC is the closest listed replacement because it uses the same 28-pin PLCC footprint, 10-macrocell architecture, 5 V supply, and approximately 500-gate configuration. ATF22V10BQL-20JI is also a same-footprint option when an industrial-temperature grade is required. Confirm programming-file compatibility, pin behavior, timing, and lifecycle requirements before using either part as a production substitute.
What is the best Microchip equivalent for ATF22V10BQL-20JC?
The Microchip ATF22V10CQZ-20JC is the most directly comparable listed equivalent because it retains the 28-pin PLCC package, 10 macrocells, nominal 5 V operation, and approximately 500-gate device class. The primary differences are ordering-family construction and temperature-grade availability. Verify the exact pin-description table and programming architecture in the Microchip documentation before committing the substitution.
ATF22V10BQL-20JC vs ATF22V10CQZ-20JC — which is better for legacy control logic?
The ATF22V10BQL-20JC is preferable when the original design specifically calls for the BQL commercial-temperature ordering code. The ATF22V10CQZ-20JC is the better candidate for a drop-in sourcing exercise because cross-reference information identifies matching 28-pin PLCC terminals, 10 macrocells, 5 V operation, and approximately 500 gates. Final selection still depends on exact timing, temperature, programming, and lifecycle requirements.
When should I choose ATF22V10BQL-20JC over ATF22V10CQZ-20JC?
Choose ATF22V10BQL-20JC when maintaining an existing design whose bill of materials, qualification records, or programmed configuration explicitly identify that MPN. Choose ATF22V10CQZ-20JC when a documented same-package equivalent is needed and the revised temperature grade, device markings, and programming compatibility have been checked. Both devices occupy the same 28-pin PLCC footprint, so PCB replacement itself should not require a layout change.
Can ATF22V10CQZ-20JC replace ATF22V10BQL-20JC without PCB changes?
Yes, the ATF22V10CQZ-20JC can be considered a drop-in replacement candidate because the cross-reference information identifies consistent 28-pin PLCC terminals, 10 macrocells, 5 V operation, and an approximately 500-gate architecture. Before physical replacement, compare the manufacturer pin tables, verify the required temperature grade, confirm timing constraints, and run a production-programming validation on the new device.
How should ATF22V10BQL-20JC be programmed and used on a PCB?
Program the ATF22V10BQL-20JC through its device programming interface according to the manufacturer's programming and test instructions, then verify the configured logic against the application. On the PCB, place the 28-pin PLCC footprint in accordance with the package drawing, maintain solderable or socket-compatible clearances as required, and connect the supply and ground pins with short, low-impedance traces. Add normal logic decoupling close to the device.

Dữ liệu tham khảo kỹ thuật cho ATF22V10BQL-20JC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose ATF22V10BQL-20JC when maintaining a legacy design whose qualified bill of materials specifically identifies the commercial-temperature -20JC ordering code. Choose ATF22V10BQL-20JI or ATF22V10CQZ-20JI when the same 28-pin PLCC footprint and 20 ns timing are needed with an industrial-temperature ordering code. ATF22V10CQZ-20JC is the closest same-footprint family alternative when a documented CQZ substitute is desired. ATF22V10CQZ-20JU and ATF22V10BQL-20JU support broader sourcing options but require confirmation of temperature limits and ordering meaning. For every alternative, verify the manufacturer pin table, macrocell architecture, programming file, and lifecycle status. This device is appropriate for compact Boolean and state-machine logic, not general-purpose FPGA applications requiring substantially more I/O, memory, or logic capacity.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ATF22V10BQL-20JI ATF22V10CQZ-20JC ATF22V10CQZ-20JI ATF22V10CQZ-20JU ATF22V10BQL-20JU
Package 28-pin PLCC, 11.51 mm × 11.51 mm 28-pin PLCC 28-pin PLCC 28-pin PLCC 28-pin PLCC 28-pin PLCC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Device Architecture 22V10 electrically erasable Flash PLD 22V10 electrically erasable Flash PLD 22V10 electrically erasable Flash PLD 22V10 electrically erasable Flash PLD 22V10 electrically erasable Flash PLD 22V10 electrically erasable Flash PLD
Macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Approximate Gate Count 500 gates 500 gates 500 gates 500 gates 500 gates 500 gates
Propagation Delay 20 ns 20 ns 20 ns 20 ns 20 ns 20 ns
Nominal Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Configuration Memory Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash
Temperature Ordering Commercial, -20JC Industrial, -20JI Commercial, -20JC Industrial, -20JI Industrial ordering, -20JU Industrial ordering, -20JU
Data Retention 20 years 20 years 20 years 20 years 20 years 20 years

Bảo phân biệt quan trọng

  • Directly preserves the legacy 28-pin PLCC footprint (vsATF22V10CQZ-20JC)
  • Maintains the same 20 ns timing class (vsATF22V10CQZ-20JI)
  • Combines 10 macrocells with approximately 500 gates (vsATF22V10BQL-20JU)
  • Electrically erasable Flash configuration supports design revisions (vsATF22V10CQZ-20JC)

Ghi chú thiết kế

Treat the 28-pin PLCC footprint as a controlled legacy interface. Verify pin numbering, power pins, and macrocell assignments against the official package drawing before layout release. For a soldered board, provide the required pad and solder-mask geometry from the manufacturer's package specification. For a socketed assembly, select a qualified PLCC socket and confirm that its pin numbering and body clearance match the PCB land pattern.

Use the ATF22V10B nominal 5 V rail and observe the supply tolerance associated with the commercial suffix. Place the standard bypass capacitor close to the device's supply and ground pins, and route those connections with short traces and a low-impedance ground reference. The family specification permits power dissipation as low as 10 mA, but actual consumption depends on the selected speed grade, temperature, and programmed function.

Do not approve a replacement from package dimensions alone. The ATF22V10BQL and ATF22V10CQZ references share the 28-pin PLCC format, but production use still requires comparison of pin descriptions, macrocell behavior, propagation delay, temperature grade, and the programming file. Validate a programmed replacement board at the intended 5 V operating conditions and exercise reset, clock, and output-state behavior before releasing it to production.

Keep programming-access signals and configuration-control traces away from sensitive analog or high-speed clock nets where practical. If the device participates in asynchronous control, use short, direct routes and maintain a continuous ground plane to reduce crosstalk. Confirm the target system's setup and hold requirements against the 20 ns device timing before assigning the SPLD to a critical path.

Thông tin tuân thủ

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
No
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Cross-reference information identifies the ATF22V10BQL-20JC as RoHS non-compliant and lead-containing. REACH, halogen-free, and conflict-minerals status are not established.

Dữ liệu được xác minh vào: 2026-11-17 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ATF22V10BQL-20JC datasheet ATF22V10BQL-20JC pinout ATF22V10BQL-20JC datasheet pdf ATF22V10BQL-20JC equivalent ATF22V10BQL-20JC replacement ATF22V10BQL-20JC cross reference ATF22V10BQL-20JC vs ATF22V10CQZ-20JC ATF22V10BQL-20JC price ATF22V10BQL-20JC stock Microchip Technology ATF22V10BQL-20JC ATF22V10BQL-20JC 28 PLCC footprint ATF22V10BQL-20JC industrial control logic

Các bộ phận và thuật ngữ liên quan

Microchip Technology ATF22V10BQL-20JC ATF22V10B ATF22V10CQZ-20JC ATF22V10CQZ-20JI ATF22V10CQZ-20JU programmable logic device PLD simple programmable logic device SPLD electrically erasable Flash memory CMOS logic IC semiconductor 22V10 macrocell 500 gates 20 ns propagation delay 28-pin PLCC PLCC package family surface-mount package industrial control telecommunications peripheral interface RoHS
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ