ATF22V10BQL-20SC - 20ns EE PLD | Microchip Technology
MPN: ATF22V10BQL-20SC ✓ Hoạt độngATF22V10BQL-20SC Tóm tắt
A simple programmable logic device, or SPLD, is a semiconductor whose digital logic function is defined by a user-programmed fuse map. The ATF22V10B family combines CMOS implementation with electrically erasable Flash memory, making it a member of the broader programmable-logic hierarchy: SPLD, programmable logic device, logic IC, and semiconductor. Unlike mask-programmed devices, electrically erasable PLDs can be reprogrammed during development, simplifying logic changes without requesting new fixed-mask production parts.
The ATF22V10B family provides speed options down to 7.5 ns and low-power options with power dissipation as low as 10 mA. The QL designation in ATF22V10BQL identifies the low-power family variant, while the -20SC ordering code identifies a 20 ns speed grade in a commercial-temperature 24-pin SOIC package. Its 10 macrocells provide a practical balance between logic capacity, predictable propagation delay, and board area for embedded control designs.
Technically, the device implements combinational or registered logic from a programmed architecture. Electrically erasable Flash memory retains the configuration when power is removed and allows the programmed logic to be changed with compatible programming equipment. Timing specifications apply across the family's stated 5 V nominal supply ranges: 5 V plus or minus 10 percent for military and industrial grades, and 5 V plus or minus 5 percent for the commercial grade. Designers should select system tolerances that remain inside the appropriate operating range.
Typical applications include legacy-compatible address decoding, glue logic, bus-interface qualification, control-signal generation, and small finite-state-machine implementations. The device can also support replacement or modernization of older GAL22V10-style logic when its architecture, fuse map, timing, supply requirements, and package pins have been verified against the system design. It is particularly useful where a compact SPLD is preferable to a larger FPGA or microcontroller.
For a sound PCB implementation, keep the supply and ground connections short, route programming and control signals away from sensitive analog paths, and follow the manufacturer's pin-description table when assigning every signal. Verify the programmed output states, reset behavior, timing margins, and unused-pin treatment in the final design. Confirm that the system supply tolerance and operating environment satisfy the commercial-grade requirements before releasing production hardware.
This product summary combines the manufacturer's ATF22V10B family information with the exact ATF22V10BQL-20SC package and ordering details, then adds practical programming, compatibility, and design considerations. It is intended to help engineers identify the correct legacy-logic device, compare speed-grade options, and plan a controlled drop-in replacement without overlooking supply, temperature, timing, or footprint constraints.
Bộ thay thế dễ dàng lắp đặt cho ATF22V10BQL-20SC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
ATF22V10BQL-10SC
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ATF22V10BQL-15SC
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ATF22V10BQL-25SC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATF22V10BQL-20SI
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATF22V10BQL-20SC Tỷ lệ tối đa & tính chất điện
| Device Type | Electrically erasable programmable logic device (PLD) |
| Product Family | ATF22V10B |
| Logic Architecture | 22V10 with 10 macrocells |
| Configuration Technology | Electrically erasable Flash memory |
| Process Technology | CMOS |
| Target Propagation Delay | 20 ns |
| Family Maximum Speed | 7.5 ns |
| Low-Power Dissipation Option | 10 mA |
| Commercial Supply Range | 4.75 V to 5.25 V (5 V ±5%) |
| Industrial and Military Supply Range | 4.5 V to 5.5 V (5 V ±10%) |
| Temperature Grade | Commercial |
| Hộp | 24-pin SOIC, 7.50 mm width |
| Terminal Count | 24 terminals |
| Lead Form | Gull wing |
| Package Shape | Rectangular |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân ATF22V10BQL-20SC rectangular
Cấu hình chân cho ATF22V10BQL-20SC (rectangular gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATF22V10BQL-20SC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATF22V10BQL-20SC phù hợp cho 6 Áp dụngs: Legacy Address Decoding, Industrial Control Glue Logic, Bus Interface Qualification, Audio and Communication Control, Test and Measurement Sequencing, Legacy GAL22V10 Migration.
Legacy Address Decoding
The ATF22V10BQL-20SC is suitable for compact address decoding where several control outputs must be generated from digital state and input signals. Its 10-macrocell ATF22V10B architecture provides dedicated logic capacity without requiring the larger footprint of an FPGA or microcontroller. The 20 ns speed grade is appropriate when external bus timing has sufficient margin. Because the device is electrically erasable Flash based, prototype logic can be revised without changing a fixed fuse pattern. Before implementation, verify decoder polarity, output timing, I/O direction, and the programmed fuse map against the original design.
Được đề xuất
Industrial Control Glue Logic
The ATF22V10BQL-20SC can implement control logic that translates sensor enables, interlocks, status inputs, and actuator commands in industrial equipment. Its 20 ns propagation delay provides predictable combinational behavior for routine control paths, while 10 macrocells allow several related functions to remain in one package. The commercial-temperature ordering option should be used only where the enclosure's ambient range remains within the family's commercial limits. For safety-related or extended-temperature systems, assess an appropriately qualified grade. Firmware and control-system designers should also confirm startup states, unused-pin behavior, and fault-mode outputs before approving the hardware.
Được đề xuất
Bus Interface Qualification
The ATF22V10BQL-20SC can add qualification, arbitration, or signal-conditioning logic between older bus devices and a controller. Ten macrocells provide enough capacity for several Boolean conditions and registered outputs, while the 24-pin SOIC package supports conventional surface-mount assembly. The 20 ns grade must be checked against bus rise time, skew, setup time, and propagation delay rather than selected from clock frequency alone. Because the ATF22V10B family is Flash-programmable, engineers can maintain a single board configuration for late-stage logic corrections. Validate contention, disabled-output, power-up, and recovery behavior at the system boundary.
Được đề xuất
Audio and Communication Control
The ATF22V10BQL-20SC can implement mute, channel-select, routing, and status logic around audio or communication equipment. The PLD consolidates Boolean equations and small state transitions that would otherwise occupy several conventional logic gates. Its electrically erasable configuration supports board-level corrections during development, while the surface-mount 24-pin SOIC package simplifies replacement in existing designs. Timing analysis should include the 20 ns propagation delay plus external gate delay and interconnect delay for every control path. Designers must also confirm that a newly asserted control does not create an undesirable transient when the supply rises or when the programmed state changes.
Được đề xuất
Test and Measurement Sequencing
The ATF22V10BQL-20SC is appropriate for deterministic test-sequence control, instrument mode selection, and measurement timing coordination. A 20 ns device can provide fast combinational decisions and registered sequencing where the complete timing budget remains under the external master clock. The 10 macrocells can hold several state transitions and output equations in one programmable device. Engineers should model setup and hold requirements across the entire chain and include initialization behavior in the state diagram. For bench instruments, the surface-mount package is practical, but the commercial temperature grade must match the intended ambient environment. Use the manufacturer timing tables and pin-description diagram as the final implementation authority.
Được đề xuất
Legacy GAL22V10 Migration
The ATF22V10BQL-20SC can support a controlled migration from GAL22V10-style logic where the system still relies on a 22V10 architecture. The ATF22V10B family provides 10 macrocells and electrically erasable Flash programming, allowing the replacement logic to be updated during qualification. Migration must start with a complete comparison of the physical pinout, supply tolerance, I/O direction, clock and reset behavior, product-term equations, and fuse-map interpretation. Microchip separately identifies the ATF22V10C family as JEDEC fusemap compatible with GAL22V10, so engineers should use the B-family documentation to prove compatibility rather than assuming it. Timing and unused-pin behavior also require board-level verification.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATF22V10BQL-20SC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATF22V10BQL-10SC | ATF22V10BQL-15SC | ATF22V10BQL-25SC | ATF22V10BQL-20SI |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-SOIC (0.295", 7.50mm Width) | 24-SOIC (0.295", 7.50mm Width) | 24-SOIC (0.295", 7.50mm Width) | 24-SOIC (0.295", 7.50mm Width) | 24-SOIC (0.295", 7.50mm Width) |
| Target Propagation Delay | 20 ns | 10 ns | 15 ns | 25 ns | 20 ns |
| Logic Architecture | 22V10 with 10 macrocells | 22V10 with 10 macrocells | 22V10 with 10 macrocells | 22V10 with 10 macrocells | 22V10 with 10 macrocells |
| Configuration Technology | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory |
| Process Technology | CMOS | CMOS | CMOS | CMOS | CMOS |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Industrial |
| Low-Power Dissipation Option | 10 mA | 10 mA family option | 10 mA family option | 10 mA family option | 10 mA family option |
Bảo phân biệt quan trọng
- Faster timing option without changing the ATF22V10BQL architecture (vsATF22V10BQL-25SC)
- Commercial-temperature option for standard ambient designs (vsATF22V10BQL-20SI)
- Balanced timing margin versus the fastest listed family option (vsATF22V10BQL-10SC)
Ghi chú thiết kế
Do not treat a shared 24-pin SOIC outline as proof of drop-in compatibility. Compare the numbered pins, power and ground locations, clock and reset assignments, programming interface, output-enable behavior, and every I/O direction in the manufacturer pin-description table. For legacy systems, also verify that the logic equations and output polarity are unchanged before loading a replacement configuration.
Analyze each logic path as the sum of the selected PLD propagation delay, external gate delay, interconnect delay, receiver setup time, and required hold margin. A 20 ns device is not automatically suitable for a 20 ns interface because the total path includes both the controller and the PLD. Use the manufacturer's AC timing tables at the actual supply voltage and temperature rather than relying on a single nominal timing number.
Place the 24-pin SOIC so that every ground and supply connection has a short, low-inductance path. Decouple the 5 V rail close to the device with the capacitance and voltage rating recommended by the ATF22V10B datasheet, while keeping the programming or control traces away from clocks and sensitive input nodes. Maintain the package's gull-wing lead geometry and compatible assembly land pattern.
Thông tin tuân thủ
The manufacturer datasheet establishes the CMOS and electrically erasable Flash construction but does not provide extractable RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statements for this exact ordering code.