Microchip Technology

ATF22V10BQL-20SC - 20ns EE PLD | Microchip Technology

Артикул: ATF22V10BQL-20SC ✓ Активен
4.75 V to 5.25 V (5 V ±5%) Vdss 24-pin SOIC, 7.50 mm width Package 7.5 ns Speed
MOQ: 1 |

ATF22V10BQL-20SC Обзор

The Microchip Technology ATF22V10BQL-20SC is a 20 ns electrically erasable CMOS programmable logic device with 10 macrocells, housed in a 24-pin SOIC package. The device uses electrically erasable Flash memory, operates from a nominal 5 V supply, and belongs to the ATF22V10B family of high-performance simple PLDs for compact control, interface, and decoding logic.

A simple programmable logic device, or SPLD, is a semiconductor whose digital logic function is defined by a user-programmed fuse map. The ATF22V10B family combines CMOS implementation with electrically erasable Flash memory, making it a member of the broader programmable-logic hierarchy: SPLD, programmable logic device, logic IC, and semiconductor. Unlike mask-programmed devices, electrically erasable PLDs can be reprogrammed during development, simplifying logic changes without requesting new fixed-mask production parts.

The ATF22V10B family provides speed options down to 7.5 ns and low-power options with power dissipation as low as 10 mA. The QL designation in ATF22V10BQL identifies the low-power family variant, while the -20SC ordering code identifies a 20 ns speed grade in a commercial-temperature 24-pin SOIC package. Its 10 macrocells provide a practical balance between logic capacity, predictable propagation delay, and board area for embedded control designs.

Technically, the device implements combinational or registered logic from a programmed architecture. Electrically erasable Flash memory retains the configuration when power is removed and allows the programmed logic to be changed with compatible programming equipment. Timing specifications apply across the family's stated 5 V nominal supply ranges: 5 V plus or minus 10 percent for military and industrial grades, and 5 V plus or minus 5 percent for the commercial grade. Designers should select system tolerances that remain inside the appropriate operating range.

Typical applications include legacy-compatible address decoding, glue logic, bus-interface qualification, control-signal generation, and small finite-state-machine implementations. The device can also support replacement or modernization of older GAL22V10-style logic when its architecture, fuse map, timing, supply requirements, and package pins have been verified against the system design. It is particularly useful where a compact SPLD is preferable to a larger FPGA or microcontroller.

For a sound PCB implementation, keep the supply and ground connections short, route programming and control signals away from sensitive analog paths, and follow the manufacturer's pin-description table when assigning every signal. Verify the programmed output states, reset behavior, timing margins, and unused-pin treatment in the final design. Confirm that the system supply tolerance and operating environment satisfy the commercial-grade requirements before releasing production hardware.

This product summary combines the manufacturer's ATF22V10B family information with the exact ATF22V10BQL-20SC package and ordering details, then adds practical programming, compatibility, and design considerations. It is intended to help engineers identify the correct legacy-logic device, compare speed-grade options, and plan a controlled drop-in replacement without overlooking supply, temperature, timing, or footprint constraints.

Аналоги без доработки для ATF22V10BQL-20SC — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

ATF22V10BQL-10SC

✅ Прямая замена ⚠️ Характеристики не проверены
📦 24-SOIC (0.295", 7.50mm Width)
Propagation delay is 10 ns rather than 20 ns, providing 10 ns more timing margin while retaining the ATF22V10BQL architecture and 24-pin SOIC footprint

📋 Справочный аналог (нет в каталоге)

ATF22V10BQL-15SC

✅ Прямая замена ⚠️ Характеристики не проверены
📦 24-SOIC (0.295", 7.50mm Width)
Propagation delay is 15 ns rather than 20 ns, providing 5 ns more timing margin with the same 24-pin SOIC package

📋 Справочный аналог (нет в каталоге)

ATF22V10BQL-25SC

✅ Прямая замена
📦 24-SOIC (0.295", 7.50mm Width)
Propagation delay is 25 ns rather than 20 ns, reducing timing margin by 5 ns while preserving the same family architecture and 24-pin SOIC footprint

📋 Справочный аналог (нет в каталоге)

ATF22V10BQL-20SI

✅ Прямая замена
📦 24-SOIC (0.295", 7.50mm Width)
The 20 ns speed rating is retained, while the ordering suffix changes the environmental qualification toward industrial use; timing difference is 0 ns

📋 Справочный аналог (нет в каталоге)

ATF22V10BQL-20SC Максимальные параметры и электрические характеристики

Device Type Electrically erasable programmable logic device (PLD)
Product Family ATF22V10B
Logic Architecture 22V10 with 10 macrocells
Configuration Technology Electrically erasable Flash memory
Process Technology CMOS
Target Propagation Delay 20 ns
Family Maximum Speed 7.5 ns
Low-Power Dissipation Option 10 mA
Commercial Supply Range 4.75 V to 5.25 V (5 V ±5%)
Industrial and Military Supply Range 4.5 V to 5.5 V (5 V ±10%)
Temperature Grade Commercial
Корпус 24-pin SOIC, 7.50 mm width
Terminal Count 24 terminals
Lead Form Gull wing
Package Shape Rectangular
Тип монтажа Surface mount

Руководство по цоколевке ATF22V10BQL-20SC в корпусе rectangular

Цоколевка для ATF22V10BQL-20SC (корпус rectangular). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса rectangular для ATF22V10BQL-20SC

Нет подробных данных о распиновке для ATF22V10BQL-20SC.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ATF22V10BQL-20SC подходит для 6 применениеs: Legacy Address Decoding, Industrial Control Glue Logic, Bus Interface Qualification, Audio and Communication Control, Test and Measurement Sequencing, Legacy GAL22V10 Migration.

🔧

Legacy Address Decoding

The ATF22V10BQL-20SC is suitable for compact address decoding where several control outputs must be generated from digital state and input signals. Its 10-macrocell ATF22V10B architecture provides dedicated logic capacity without requiring the larger footprint of an FPGA or microcontroller. The 20 ns speed grade is appropriate when external bus timing has sufficient margin. Because the device is electrically erasable Flash based, prototype logic can be revised without changing a fixed fuse pattern. Before implementation, verify decoder polarity, output timing, I/O direction, and the programmed fuse map against the original design.

🏭

Industrial Control Glue Logic

The ATF22V10BQL-20SC can implement control logic that translates sensor enables, interlocks, status inputs, and actuator commands in industrial equipment. Its 20 ns propagation delay provides predictable combinational behavior for routine control paths, while 10 macrocells allow several related functions to remain in one package. The commercial-temperature ordering option should be used only where the enclosure's ambient range remains within the family's commercial limits. For safety-related or extended-temperature systems, assess an appropriately qualified grade. Firmware and control-system designers should also confirm startup states, unused-pin behavior, and fault-mode outputs before approving the hardware.

🔧

Bus Interface Qualification

The ATF22V10BQL-20SC can add qualification, arbitration, or signal-conditioning logic between older bus devices and a controller. Ten macrocells provide enough capacity for several Boolean conditions and registered outputs, while the 24-pin SOIC package supports conventional surface-mount assembly. The 20 ns grade must be checked against bus rise time, skew, setup time, and propagation delay rather than selected from clock frequency alone. Because the ATF22V10B family is Flash-programmable, engineers can maintain a single board configuration for late-stage logic corrections. Validate contention, disabled-output, power-up, and recovery behavior at the system boundary.

🎧

Audio and Communication Control

The ATF22V10BQL-20SC can implement mute, channel-select, routing, and status logic around audio or communication equipment. The PLD consolidates Boolean equations and small state transitions that would otherwise occupy several conventional logic gates. Its electrically erasable configuration supports board-level corrections during development, while the surface-mount 24-pin SOIC package simplifies replacement in existing designs. Timing analysis should include the 20 ns propagation delay plus external gate delay and interconnect delay for every control path. Designers must also confirm that a newly asserted control does not create an undesirable transient when the supply rises or when the programmed state changes.

🖥️

Test and Measurement Sequencing

The ATF22V10BQL-20SC is appropriate for deterministic test-sequence control, instrument mode selection, and measurement timing coordination. A 20 ns device can provide fast combinational decisions and registered sequencing where the complete timing budget remains under the external master clock. The 10 macrocells can hold several state transitions and output equations in one programmable device. Engineers should model setup and hold requirements across the entire chain and include initialization behavior in the state diagram. For bench instruments, the surface-mount package is practical, but the commercial temperature grade must match the intended ambient environment. Use the manufacturer timing tables and pin-description diagram as the final implementation authority.

🔧

Legacy GAL22V10 Migration

The ATF22V10BQL-20SC can support a controlled migration from GAL22V10-style logic where the system still relies on a 22V10 architecture. The ATF22V10B family provides 10 macrocells and electrically erasable Flash programming, allowing the replacement logic to be updated during qualification. Migration must start with a complete comparison of the physical pinout, supply tolerance, I/O direction, clock and reset behavior, product-term equations, and fuse-map interpretation. Microchip separately identifies the ATF22V10C family as JEDEC fusemap compatible with GAL22V10, so engineers should use the B-family documentation to prove compatibility rather than assuming it. Timing and unused-pin behavior also require board-level verification.

What is ATF22V10BQL-20SC?
The ATF22V10BQL-20SC is a Microchip Technology 20 ns electrically erasable CMOS programmable logic device with 10 macrocells in a commercial-temperature 24-pin SOIC package. According to the ATF22V10B manufacturer datasheet, the ATF22V10B family uses electrically erasable Flash memory and is intended for programmable combinational or registered logic implementations.
What are the key specifications of ATF22V10BQL-20SC that engineers should know?
The ATF22V10BQL-20SC combines a 20 ns speed grade, 10 macrocells, electrically erasable Flash configuration, and a 24-pin SOIC footprint. According to the ATF22V10B manufacturer datasheet, the broader family supports speeds down to 7.5 ns and low-power dissipation as low as 10 mA. These characteristics make the part suitable for compact decoding, control, interface, and replacement logic.
What is the operating voltage of ATF22V10BQL-20SC?
The ATF22V10BQL-20SC is specified at a nominal 5 V supply, with the commercial grade covering 4.75 V to 5.25 V, or 5 V ±5%. According to the ATF22V10B manufacturer datasheet, military and industrial speed ranges use 5 V ±10%, or 4.5 V to 5.5 V. The appropriate limit depends on the selected temperature grade.
Where can I download the ATF22V10BQL-20SC datasheet PDF?
The official ATF22V10B datasheet PDF is available from Microchip Technology at https://www.microchip.com/content/dam/mchp/documents/OTH/ProductDocuments/DataSheets/doc0250.pdf. The document defines the ATF22V10B family architecture, electrical characteristics, operating conditions, package information, and programming details. Use the ordering-information section to confirm the -20SC speed, temperature, and package designation.
Where can I find the ATF22V10BQL-20SC pinout?
The ATF22V10BQL-20SC pinout is defined in the pin-description section and package drawings of the official ATF22V10B manufacturer datasheet. The part uses a 24-pin SOIC with gull-wing leads. When replacing an existing PLD, compare every numbered pin, the power and ground positions, programming pins, clock or reset signals, and I/O direction assignments rather than relying only on the package dimensions.
What can replace ATF22V10BQL-20SC?
The closest same-footprint choices are other ATF22V10BQL speed grades such as ATF22V10BQL-10SC, ATF22V10BQL-15SC, and ATF22V10BQL-25SC, plus the industrial-temperature ATF22V10BQL-20SI when its package pins are confirmed identical. According to Microchip's ATF22V10B family information, speed and temperature changes do not inherently alter the fuse-map architecture, but timing and environmental requirements still require verification.
Is ATF22V10BQL-20SC the same as ATF22V10BQL-20SI?
The two parts are not identical in environmental grade. ATF22V10BQL-20SC is the commercial-temperature 24-pin SOIC ordering option, while ATF22V10BQL-20SI denotes a related industrial-oriented ordering option whose exact package and pin assignments must be checked. Their speed grade is 20 ns, but temperature qualification, marking, purchasing configuration, and lifecycle requirements can differ.
ATF22V10BQL-20SC vs ATF22V10BQL-10SC — which is better?
ATF22V10BQL-10SC is the better choice when a system needs more timing margin because it is a 10 ns device, while ATF22V10BQL-20SC is the appropriate choice when 20 ns meets the design requirement. According to the ATF22V10B manufacturer datasheet, both parts belong to the same electrically erasable Flash PLD family, so logic architecture should be compatible after confirming the exact pinout and operating grade.
When should I choose ATF22V10BQL-20SC over ATF22V10BQL-15SC?
Choose ATF22V10BQL-20SC over ATF22V10BQL-15SC when the 20 ns propagation-delay grade satisfies the required setup and hold margins and the wider timing tolerance does not create a functional limitation. Choose the 15 SC version instead when the external logic path needs approximately 5 ns less delay or a greater timing margin. Both are speed grades within the ATF22V10BQL family.
Is ATF22V10BQL-20SC suitable for legacy GAL22V10 replacement designs?
The ATF22V10BQL-20SC can be considered for a legacy GAL22V10 replacement only after verifying the fuse map, pinout, supply range, timing, programming method, and system-level polarity. Microchip identifies the ATF22V10C family as pin-to-pin and JEDEC fusemap compatible with GAL22V10, but engineers should not transfer that statement to the B variant without checking the detailed migration requirements.
What is the best Microchip Technology equivalent for ATF22V10BQL-20SC?
The most direct Microchip Technology alternatives are the ATF22V10BQL speed grades in the same 24-pin SOIC family, particularly ATF22V10BQL-10SC, ATF22V10BQL-15SC, and ATF22V10BQL-25SC. ATF22V10BQL-20SI is a related industrial-temperature candidate. Each candidate must be checked for identical pin assignments, configuration-file compatibility, timing, and operating limits before substitution.
Where can I buy ATF22V10BQL-20SC online?
Use the Request a Quote form on this page to request ATF22V10BQL-20SC availability, current commercial terms, and the required quantity. The exact ordering code combines a 20 ns speed grade, the low-power QL family variant, a commercial-temperature designation, and a 24-pin SOIC package. Confirm the complete MPN and packaging requirements in the quote request to avoid receiving a different grade or termination.
What is the price of ATF22V10BQL-20SC?
The current commercial price for ATF22V10BQL-20SC should be obtained through the Request a Quote form on this page so that quantity, packaging, delivery, and lifecycle status are matched to the order. The product page separates transactional pricing from technical specifications. Quote requests should state the required quantity and whether multiple production deliveries are anticipated.
What is the lead time for ATF22V10BQL-20SC?
The current lead time for ATF22V10BQL-20SC should be confirmed through the Request a Quote form on this page. Lead time can depend on the requested quantity, scheduled delivery, package form, and the current manufacturer supply position. For production planning, provide the requested annual usage and build schedule so the supplier can confirm a realistic allocation and delivery cadence.
Is ATF22V10BQL-20SC in stock?
Current ATF22V10BQL-20SC stock status should be confirmed through the Request a Quote form on this page. Inventory position is quantity- and packaging-specific and may change independently of the device's lifecycle status. The request should identify the required package quantity and delivery schedule, allowing the supplier to check the exact MPN rather than a broader ATF22V10B family designation.

Справочные инженерные данные для ATF22V10BQL-20SC — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose ATF22V10BQL-20SC when the original design used the commercial 20 ns ATF22V10BQL configuration, the 24-pin SOIC footprint must remain unchanged, and the external timing budget comfortably accommodates a 20 ns propagation delay. Select ATF22V10BQL-10SC when the fastest listed speed grade provides needed timing margin, or ATF22V10BQL-15SC when 15 ns is the closest acceptable grade. ATF22V10BQL-25SC is appropriate only when 25 ns still satisfies the system timing. Use ATF22V10BQL-20SI for an industrial-oriented design after verifying its complete pinout and operating limits. In every case, confirm supply tolerance, temperature grade, fuse-map compatibility, pin assignments, programming procedure, and power-up states before approving a drop-in replacement.

Сравнение с аналогами

Параметр Этот товар ATF22V10BQL-10SC ATF22V10BQL-15SC ATF22V10BQL-25SC ATF22V10BQL-20SI
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 24-SOIC (0.295", 7.50mm Width) 24-SOIC (0.295", 7.50mm Width) 24-SOIC (0.295", 7.50mm Width) 24-SOIC (0.295", 7.50mm Width) 24-SOIC (0.295", 7.50mm Width)
Target Propagation Delay 20 ns 10 ns 15 ns 25 ns 20 ns
Logic Architecture 22V10 with 10 macrocells 22V10 with 10 macrocells 22V10 with 10 macrocells 22V10 with 10 macrocells 22V10 with 10 macrocells
Configuration Technology Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory
Process Technology CMOS CMOS CMOS CMOS CMOS
Temperature Grade Commercial Commercial Commercial Commercial Industrial
Low-Power Dissipation Option 10 mA 10 mA family option 10 mA family option 10 mA family option 10 mA family option

Ключевые отличия

  • Faster timing option without changing the ATF22V10BQL architecture (против ATF22V10BQL-25SC)
  • Commercial-temperature option for standard ambient designs (против ATF22V10BQL-20SI)
  • Balanced timing margin versus the fastest listed family option (против ATF22V10BQL-10SC)

Заметки по проектированию

Do not treat a shared 24-pin SOIC outline as proof of drop-in compatibility. Compare the numbered pins, power and ground locations, clock and reset assignments, programming interface, output-enable behavior, and every I/O direction in the manufacturer pin-description table. For legacy systems, also verify that the logic equations and output polarity are unchanged before loading a replacement configuration.

Analyze each logic path as the sum of the selected PLD propagation delay, external gate delay, interconnect delay, receiver setup time, and required hold margin. A 20 ns device is not automatically suitable for a 20 ns interface because the total path includes both the controller and the PLD. Use the manufacturer's AC timing tables at the actual supply voltage and temperature rather than relying on a single nominal timing number.

Place the 24-pin SOIC so that every ground and supply connection has a short, low-inductance path. Decouple the 5 V rail close to the device with the capacitance and voltage rating recommended by the ATF22V10B datasheet, while keeping the programming or control traces away from clocks and sensitive input nodes. Maintain the package's gull-wing lead geometry and compatible assembly land pattern.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer datasheet establishes the CMOS and electrically erasable Flash construction but does not provide extractable RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statements for this exact ordering code.

Данные проверены: 2026-11-17 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ATF22V10BQL-20SC ATF22V10BQL-20SC datasheet ATF22V10BQL-20SC datasheet pdf ATF22V10BQL-20SC pinout ATF22V10BQL-20SC equivalent ATF22V10BQL-20SC replacement ATF22V10BQL-20SC footprint ATF22V10BQL-20SC price ATF22V10BQL-20SC stock Microchip Technology ATF22V10BQL-20SC ATF22V10BQL-20SC vs ATF22V10BQL-10SC 24-SOIC 20ns EE PLD

Связанные компоненты & термины

Microchip Technology ATF22V10BQL-20SC ATF22V10BQL-10SC ATF22V10BQL-15SC ATF22V10BQL-25SC ATF22V10BQL-20SI ATF22V10B electrically erasable programmable logic device simple programmable logic device SPLD programmable logic device logic IC semiconductor 22V10 architecture macrocells electrically erasable Flash memory CMOS 20 ns propagation delay 5 V nominal supply 24-pin SOIC SOIC package family surface mount SMD address decoding industrial control logic GAL22V10 JEDEC fusemap
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ