ATF22V10BQL-20SC - 20ns EE PLD | Microchip Technology
MPN: ATF22V10BQL-20SC ✓ פעילATF22V10BQL-20SC סקירה
A simple programmable logic device, or SPLD, is a semiconductor whose digital logic function is defined by a user-programmed fuse map. The ATF22V10B family combines CMOS implementation with electrically erasable Flash memory, making it a member of the broader programmable-logic hierarchy: SPLD, programmable logic device, logic IC, and semiconductor. Unlike mask-programmed devices, electrically erasable PLDs can be reprogrammed during development, simplifying logic changes without requesting new fixed-mask production parts.
The ATF22V10B family provides speed options down to 7.5 ns and low-power options with power dissipation as low as 10 mA. The QL designation in ATF22V10BQL identifies the low-power family variant, while the -20SC ordering code identifies a 20 ns speed grade in a commercial-temperature 24-pin SOIC package. Its 10 macrocells provide a practical balance between logic capacity, predictable propagation delay, and board area for embedded control designs.
Technically, the device implements combinational or registered logic from a programmed architecture. Electrically erasable Flash memory retains the configuration when power is removed and allows the programmed logic to be changed with compatible programming equipment. Timing specifications apply across the family's stated 5 V nominal supply ranges: 5 V plus or minus 10 percent for military and industrial grades, and 5 V plus or minus 5 percent for the commercial grade. Designers should select system tolerances that remain inside the appropriate operating range.
Typical applications include legacy-compatible address decoding, glue logic, bus-interface qualification, control-signal generation, and small finite-state-machine implementations. The device can also support replacement or modernization of older GAL22V10-style logic when its architecture, fuse map, timing, supply requirements, and package pins have been verified against the system design. It is particularly useful where a compact SPLD is preferable to a larger FPGA or microcontroller.
For a sound PCB implementation, keep the supply and ground connections short, route programming and control signals away from sensitive analog paths, and follow the manufacturer's pin-description table when assigning every signal. Verify the programmed output states, reset behavior, timing margins, and unused-pin treatment in the final design. Confirm that the system supply tolerance and operating environment satisfy the commercial-grade requirements before releasing production hardware.
This product summary combines the manufacturer's ATF22V10B family information with the exact ATF22V10BQL-20SC package and ordering details, then adds practical programming, compatibility, and design considerations. It is intended to help engineers identify the correct legacy-logic device, compare speed-grade options, and plan a controlled drop-in replacement without overlooking supply, temperature, timing, or footprint constraints.
חלופות תחליף ישיר עבור ATF22V10BQL-20SC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
ATF22V10BQL-10SC
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
ATF22V10BQL-15SC
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
ATF22V10BQL-25SC
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ATF22V10BQL-20SI
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ATF22V10BQL-20SC דירוגים מרביים ומאפיינים חשמליים
| Device Type | Electrically erasable programmable logic device (PLD) |
| Product Family | ATF22V10B |
| Logic Architecture | 22V10 with 10 macrocells |
| Configuration Technology | Electrically erasable Flash memory |
| Process Technology | CMOS |
| Target Propagation Delay | 20 ns |
| Family Maximum Speed | 7.5 ns |
| Low-Power Dissipation Option | 10 mA |
| Commercial Supply Range | 4.75 V to 5.25 V (5 V ±5%) |
| Industrial and Military Supply Range | 4.5 V to 5.5 V (5 V ±10%) |
| Temperature Grade | Commercial |
| מארז | 24-pin SOIC, 7.50 mm width |
| Terminal Count | 24 terminals |
| Lead Form | Gull wing |
| Package Shape | Rectangular |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של ATF22V10BQL-20SC rectangular
תצורת פינים עבור ATF22V10BQL-20SC (מארזת rectangular). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור ATF22V10BQL-20SC.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ATF22V10BQL-20SC מתאים עבור 6 יישוםs: Legacy Address Decoding, Industrial Control Glue Logic, Bus Interface Qualification, Audio and Communication Control, Test and Measurement Sequencing, Legacy GAL22V10 Migration.
Legacy Address Decoding
The ATF22V10BQL-20SC is suitable for compact address decoding where several control outputs must be generated from digital state and input signals. Its 10-macrocell ATF22V10B architecture provides dedicated logic capacity without requiring the larger footprint of an FPGA or microcontroller. The 20 ns speed grade is appropriate when external bus timing has sufficient margin. Because the device is electrically erasable Flash based, prototype logic can be revised without changing a fixed fuse pattern. Before implementation, verify decoder polarity, output timing, I/O direction, and the programmed fuse map against the original design.
מומלץ
Industrial Control Glue Logic
The ATF22V10BQL-20SC can implement control logic that translates sensor enables, interlocks, status inputs, and actuator commands in industrial equipment. Its 20 ns propagation delay provides predictable combinational behavior for routine control paths, while 10 macrocells allow several related functions to remain in one package. The commercial-temperature ordering option should be used only where the enclosure's ambient range remains within the family's commercial limits. For safety-related or extended-temperature systems, assess an appropriately qualified grade. Firmware and control-system designers should also confirm startup states, unused-pin behavior, and fault-mode outputs before approving the hardware.
מומלץ
Bus Interface Qualification
The ATF22V10BQL-20SC can add qualification, arbitration, or signal-conditioning logic between older bus devices and a controller. Ten macrocells provide enough capacity for several Boolean conditions and registered outputs, while the 24-pin SOIC package supports conventional surface-mount assembly. The 20 ns grade must be checked against bus rise time, skew, setup time, and propagation delay rather than selected from clock frequency alone. Because the ATF22V10B family is Flash-programmable, engineers can maintain a single board configuration for late-stage logic corrections. Validate contention, disabled-output, power-up, and recovery behavior at the system boundary.
מומלץ
Audio and Communication Control
The ATF22V10BQL-20SC can implement mute, channel-select, routing, and status logic around audio or communication equipment. The PLD consolidates Boolean equations and small state transitions that would otherwise occupy several conventional logic gates. Its electrically erasable configuration supports board-level corrections during development, while the surface-mount 24-pin SOIC package simplifies replacement in existing designs. Timing analysis should include the 20 ns propagation delay plus external gate delay and interconnect delay for every control path. Designers must also confirm that a newly asserted control does not create an undesirable transient when the supply rises or when the programmed state changes.
מומלץ
Test and Measurement Sequencing
The ATF22V10BQL-20SC is appropriate for deterministic test-sequence control, instrument mode selection, and measurement timing coordination. A 20 ns device can provide fast combinational decisions and registered sequencing where the complete timing budget remains under the external master clock. The 10 macrocells can hold several state transitions and output equations in one programmable device. Engineers should model setup and hold requirements across the entire chain and include initialization behavior in the state diagram. For bench instruments, the surface-mount package is practical, but the commercial temperature grade must match the intended ambient environment. Use the manufacturer timing tables and pin-description diagram as the final implementation authority.
מומלץ
Legacy GAL22V10 Migration
The ATF22V10BQL-20SC can support a controlled migration from GAL22V10-style logic where the system still relies on a 22V10 architecture. The ATF22V10B family provides 10 macrocells and electrically erasable Flash programming, allowing the replacement logic to be updated during qualification. Migration must start with a complete comparison of the physical pinout, supply tolerance, I/O direction, clock and reset behavior, product-term equations, and fuse-map interpretation. Microchip separately identifies the ATF22V10C family as JEDEC fusemap compatible with GAL22V10, so engineers should use the B-family documentation to prove compatibility rather than assuming it. Timing and unused-pin behavior also require board-level verification.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ATF22V10BQL-20SC — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ATF22V10BQL-10SC | ATF22V10BQL-15SC | ATF22V10BQL-25SC | ATF22V10BQL-20SI |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-SOIC (0.295", 7.50mm Width) | 24-SOIC (0.295", 7.50mm Width) | 24-SOIC (0.295", 7.50mm Width) | 24-SOIC (0.295", 7.50mm Width) | 24-SOIC (0.295", 7.50mm Width) |
| Target Propagation Delay | 20 ns | 10 ns | 15 ns | 25 ns | 20 ns |
| Logic Architecture | 22V10 with 10 macrocells | 22V10 with 10 macrocells | 22V10 with 10 macrocells | 22V10 with 10 macrocells | 22V10 with 10 macrocells |
| Configuration Technology | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory |
| Process Technology | CMOS | CMOS | CMOS | CMOS | CMOS |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Industrial |
| Low-Power Dissipation Option | 10 mA | 10 mA family option | 10 mA family option | 10 mA family option | 10 mA family option |
מבדילים עיקריים
- Faster timing option without changing the ATF22V10BQL architecture (לעומתATF22V10BQL-25SC)
- Commercial-temperature option for standard ambient designs (לעומתATF22V10BQL-20SI)
- Balanced timing margin versus the fastest listed family option (לעומתATF22V10BQL-10SC)
הערות תכנון
Do not treat a shared 24-pin SOIC outline as proof of drop-in compatibility. Compare the numbered pins, power and ground locations, clock and reset assignments, programming interface, output-enable behavior, and every I/O direction in the manufacturer pin-description table. For legacy systems, also verify that the logic equations and output polarity are unchanged before loading a replacement configuration.
Analyze each logic path as the sum of the selected PLD propagation delay, external gate delay, interconnect delay, receiver setup time, and required hold margin. A 20 ns device is not automatically suitable for a 20 ns interface because the total path includes both the controller and the PLD. Use the manufacturer's AC timing tables at the actual supply voltage and temperature rather than relying on a single nominal timing number.
Place the 24-pin SOIC so that every ground and supply connection has a short, low-inductance path. Decouple the 5 V rail close to the device with the capacitance and voltage rating recommended by the ATF22V10B datasheet, while keeping the programming or control traces away from clocks and sensitive input nodes. Maintain the package's gull-wing lead geometry and compatible assembly land pattern.
מידע על תאימות
The manufacturer datasheet establishes the CMOS and electrically erasable Flash construction but does not provide extractable RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statements for this exact ordering code.