ATSAM4SD16CA-AU - SAM4S Cortex-M4 MCU 120MHz 1MB | Microchip
MPN: ATSAM4SD16CA-AU ✓ Hoạt độngATSAM4SD16CA-AU Tóm tắt
An ARM Cortex-M4 microcontroller is a 32-bit processor core designed for embedded systems, combining high computational throughput with low power consumption and a rich interrupt model. Within the broader taxonomy, it sits in the hierarchy: ARM Cortex-M4 -> Cortex-M family -> ARM 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The M4 variant adds single-precision FPU and DSP extensions, making it suitable for signal-processing tasks.
Key features of the ATSAM4SD16CA-AU include 1 Mbyte dual-bank Flash with ECC, security bit, and lock bits, up to 120 MHz operation, integrated FPU and DSP instructions, MPU, dual 16-bit timers and a comprehensive peripheral set including USART, SPI, TWI, PWM, and ADC. The device operates from 1.62V to 3.6V and includes a Brown-Out Detector (BOD) and Watchdog.
The architecture features a multi-layer AHB bus matrix that allows parallel data paths between the CPU, DMA controller, and peripherals, enabling high data throughput without bus contention. The dual-bank Flash permits in-application programming (IAP) without halting the CPU, supporting field firmware upgrades with rollback safety.
Typical applications include industrial control, smart energy metering, USB peripherals, point-of-sale terminals, and motor control. Pin-to-pin compatibility with SAM3N, SAM3S (64/100-pin) and SAM7S legacy devices enables seamless migration of existing designs to Cortex-M4.
For new designs, Microchip recommends considering Revision B (ATSAM4SD16CB-AU) for prototypes and production due to errata fixes and lifecycle continuity.
This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho ATSAM4SD16CA-AU — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATSAM4SD16CA-AU (cùng hình factor và footprint) — khác nhau ở ADC, Package, Operating Temperature, Core Architecture, RoHS Status.
ATSAM4SD16CB-AU
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATSAM4S16CA-AU
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAM4SD32CA-AU
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATSAM4SD16CA-CU
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAM4SD16BA-AU
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAM4SA16CA-AUR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAM4SD16CA-AU Tỷ lệ tối đa & tính chất điện
| Core | ARM Cortex-M4 |
| Core Count | Single-core |
| Tần số xung maksimum | 120 MHz |
| Cache | 2 Kbytes |
| Instruction Set | Thumb-2, DSP |
| FPU | Single-precision |
| Program Flash | 1 MB (2 x 512 KB dual-bank) |
| SRAM | 160 KB |
| Memory Protection Unit (MPU) | Yes |
| DMA | Multi-channel |
| Operating Voltage | 1.62 V to 3.6 V |
| Hộp | 100-pin LQFP (14x14 mm) |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40 C to +85 C (industrial) |
| Trạng thái RoHS | Compliant |
| Lead-Free | Yes |
| Pin-to-Pin Compatible | SAM3N, SAM3S (64/100-pin), SAM7S legacy |
Cấu hình chân ATSAM4SD16CA-AU
| Chân 1 | PB0 — General-purpose I/O / peripheral function |
| Chân 2 | PB1 — General-purpose I/O / peripheral function |
| Chân 3 | PB2 — General-purpose I/O / peripheral function |
| Chân 4 | PB3 — General-purpose I/O / peripheral function |
| Chân 5 | VDDOUT — Voltage regulator output (1.8V core supply) |
| Chân 6 | VDDIN — Voltage regulator input |
| Chân 7 | VDDIO — I/O supply voltage |
| Chân 8 | GND — Ground |
| Chân 9 | XIN — Crystal oscillator input |
| Chân 10 | XOUT — Crystal oscillator output |
| Chân 11 | NRST — Reset input (active low) |
| Chân 12 | TST — Test mode (tie to GND) |
| Chân 13 | JTAGSEL — JTAG selection (tie to VDDIO for JTAG) |
| Chân 14 | PA0 — General-purpose I/O / peripheral function |
| Chân 15 | PA1 — General-purpose I/O / peripheral function |
| Chân 16 | PA2 — General-purpose I/O / peripheral function |
| Chân 17 | PA3 — General-purpose I/O / peripheral function |
| Chân 18 | PA4 — General-purpose I/O / peripheral function |
| Chân 19 | PA5 — General-purpose I/O / peripheral function |
| Chân 20 | PA6 — General-purpose I/O / peripheral function |
| Chân 21 | PA7 — General-purpose I/O / peripheral function |
| Chân 22 | PA8 — General-purpose I/O / peripheral function |
| Chân 23 | PA9 — General-purpose I/O / peripheral function |
| Chân 24 | PA10 — General-purpose I/O / peripheral function |
| Chân 25 | PA11 — General-purpose I/O / peripheral function |
| Chân 26 | PA12 — General-purpose I/O / peripheral function |
| Chân 27 | PA13 — General-purpose I/O / peripheral function |
| Chân 28 | PA14 — General-purpose I/O / peripheral function |
| Chân 29 | VDDCORE — Core supply voltage (1.2V) |
| Chân 30 | GND — Ground |
| Chân 31 | VDDIO — I/O supply voltage |
| Chân 32 | PA15 — General-purpose I/O / peripheral function |
| Chân 33 | PA16 — General-purpose I/O / peripheral function |
| Chân 34 | PA17 — General-purpose I/O / peripheral function |
| Chân 35 | PA18 — General-purpose I/O / peripheral function |
| Chân 36 | PA19 — General-purpose I/O / peripheral function |
| Chân 37 | PA20 — General-purpose I/O / peripheral function |
| Chân 38 | PA21 — General-purpose I/O / peripheral function |
| Chân 39 | PA22 — General-purpose I/O / peripheral function |
| Chân 40 | PA23 — General-purpose I/O / peripheral function |
| Chân 41 | PA24 — General-purpose I/O / peripheral function |
| Chân 42 | PA25 — General-purpose I/O / peripheral function |
| Chân 43 | PA26 — General-purpose I/O / peripheral function |
| Chân 44 | PA27 — General-purpose I/O / peripheral function |
| Chân 45 | PA28 — General-purpose I/O / peripheral function |
| Chân 46 | PA29 — General-purpose I/O / peripheral function |
| Chân 47 | PA30 — General-purpose I/O / peripheral function |
| Chân 48 | PA31 — General-purpose I/O / peripheral function |
| Chân 49 | PB4 — General-purpose I/O / peripheral function |
| Chân 50 | PB5 — General-purpose I/O / peripheral function |
| Chân 51 | PB6 — General-purpose I/O / peripheral function |
| Chân 52 | PB7 — General-purpose I/O / peripheral function |
| Chân 53 | PB8 — General-purpose I/O / peripheral function |
| Chân 54 | PB9 — General-purpose I/O / peripheral function |
| Chân 55 | PB10 — General-purpose I/O / peripheral function |
| Chân 56 | PB11 — General-purpose I/O / peripheral function |
| Chân 57 | PB12 — General-purpose I/O / peripheral function |
| Chân 58 | PB13 — General-purpose I/O / peripheral function |
| Chân 59 | PB14 — General-purpose I/O / peripheral function |
| Chân 60 | PB15 — General-purpose I/O / peripheral function |
| Chân 61 | PC0 — General-purpose I/O / peripheral function |
| Chân 62 | PC1 — General-purpose I/O / peripheral function |
| Chân 63 | PC2 — General-purpose I/O / peripheral function |
| Chân 64 | PC3 — General-purpose I/O / peripheral function |
| Chân 65 | PC4 — General-purpose I/O / peripheral function |
| Chân 66 | PC5 — General-purpose I/O / peripheral function |
| Chân 67 | PC6 — General-purpose I/O / peripheral function |
| Chân 68 | PC7 — General-purpose I/O / peripheral function |
| Chân 69 | PC8 — General-purpose I/O / peripheral function |
| Chân 70 | PC9 — General-purpose I/O / peripheral function |
| Chân 71 | PC10 — General-purpose I/O / peripheral function |
| Chân 72 | PC11 — General-purpose I/O / peripheral function |
| Chân 73 | PC12 — General-purpose I/O / peripheral function |
| Chân 74 | PC13 — General-purpose I/O / peripheral function |
| Chân 75 | PC14 — General-purpose I/O / peripheral function |
| Chân 76 | PC15 — General-purpose I/O / peripheral function |
| Chân 77 | PC16 — General-purpose I/O / peripheral function |
| Chân 78 | PC17 — General-purpose I/O / peripheral function |
| Chân 79 | PC18 — General-purpose I/O / peripheral function |
| Chân 80 | PC19 — General-purpose I/O / peripheral function |
| Chân 81 | PC20 — General-purpose I/O / peripheral function |
| Chân 82 | PC21 — General-purpose I/O / peripheral function |
| Chân 83 | PC22 — General-purpose I/O / peripheral function |
| Chân 84 | PC23 — General-purpose I/O / peripheral function |
| Chân 85 | PC24 — General-purpose I/O / peripheral function |
| Chân 86 | PC25 — General-purpose I/O / peripheral function |
| Chân 87 | PC26 — General-purpose I/O / peripheral function |
| Chân 88 | PC27 — General-purpose I/O / peripheral function |
| Chân 89 | PC28 — General-purpose I/O / peripheral function |
| Chân 90 | PC29 — General-purpose I/O / peripheral function |
| Chân 91 | PC30 — General-purpose I/O / peripheral function |
| Chân 92 | PC31 — General-purpose I/O / peripheral function |
| Chân 93 | PD0 — General-purpose I/O / peripheral function |
| Chân 94 | PD1 — General-purpose I/O / peripheral function |
| Chân 95 | PD2 — General-purpose I/O / peripheral function |
| Chân 96 | PD3 — General-purpose I/O / peripheral function |
| Chân 97 | PD4 — General-purpose I/O / peripheral function |
| Chân 98 | PD5 — General-purpose I/O / peripheral function |
| Chân 99 | PD6 — General-purpose I/O / peripheral function |
| Chân 100 | PD7 — General-purpose I/O / peripheral function |
Ứng dụng tiêu biểu
ATSAM4SD16CA-AU phù hợp cho 6 Áp dụngs: Industrial Control Systems, USB Device Peripherals, Smart Energy Metering, Motor Control and Inverters, Point-of-Sale Terminals, Data Logging and Sensor Hubs.
Industrial Control Systems
The ATSAM4SD16CA-AU suits industrial control with 120 MHz Cortex-M4 core handling PID loops at sub-millisecond rates, 160 KB SRAM accommodating protocol stacks (Modbus, EtherCAT slave) plus application buffers, and 100-LQFP package providing generous GPIO for sensor aggregation. Its industrial -40C to +85C operating range supports factory floor deployment. The DSP extensions and FPU enable floating-point motor control math without burdening the CPU, and the dual-bank Flash allows safe remote firmware updates in unattended equipment. Place a 100 nF + 10 uF decoupling pair near each VDD pin and route the analog AGND separately from digital GND to preserve ADC accuracy on the integrated 12-bit ADC channels used for current/voltage sensing.
Được đề xuất
USB Device Peripherals
The ATSAM4SD16CA-AU integrates a USB 2.0 Full-Speed device controller with on-chip transceiver and programmable pull-up, eliminating the need for an external PHY. With 120 MHz Cortex-M4 and DMA, USB HID, CDC, MSD, or vendor class implementations run with minimal CPU loading, while 160 KB SRAM comfortably holds USB descriptors and protocol state. The 1 MB dual-bank Flash supports multi-language USB HID descriptors or composite device firmware. Use a 12 MHz external crystal with proper PCB layout to meet USB jitter requirements; route D+/D- as a 90-ohm differential pair with matched trace lengths.
Được đề xuất
Smart Energy Metering
The ATSAM4SD16CA-AU fits smart energy metering where the Cortex-M4 with FPU accelerates RMS and FFT calculations on AC line waveforms sampled by the integrated 12-bit ADC. Its 160 KB SRAM provides headroom for metrology buffers, and 1 MB dual-bank Flash enables secure firmware with rollback for utility deployments. The MPU enables privilege separation between metering code and communication stacks, and the ECC Flash integrity check helps meet metering accuracy regulations. Operate from a 3.3 V linear regulator fed by the AC-line-derived DC bus; isolate the metrology GND from the communication GND to reduce noise coupling.
Được đề xuất
Motor Control and Inverters
The ATSAM4SD16CA-AU drives BLDC, PMSM, or stepper motors using its PWM timer/counter outputs with complementary channels and dead-time insertion. The Cortex-M4 single-precision FPU runs field-oriented control (FOC) math with sub-microsecond loop times at 120 MHz, while DSP instructions accelerate Park/Clarke transforms. The 100-LQFP exposes 3 PWM timer blocks sufficient for 3-phase bridges, and the A/D synchronization to PWM enables precise current sampling. Keep PWM traces short and isolated from analog signals; add a Schottky flyback clamp on each motor phase output to protect the MCU during commutation events.
Được đề xuất
Point-of-Sale Terminals
The ATSAM4SD16CA-AU serves as the main controller in POS terminals where 1 MB Flash holds payment application firmware, and 160 KB SRAM buffers transaction packets and printer queues. The USB Full-Speed port connects to peripherals (barcode scanner, PIN pad), while multiple USARTs drive the receipt printer and customer display. The Cortex-M4 DSP extensions enable on-device encryption acceleration (AES via software libraries) for transaction security. The industrial temperature range supports outdoor deployment in kiosk-style terminals. Add ESD protection diodes on all external I/O lines to survive handling and field abuse.
Được đề xuất
Data Logging and Sensor Hubs
The ATSAM4SD16CA-AU functions as a sensor hub with its 12-bit ADC, multiple SPI/TWI interfaces, and DMA controller offloading sensor sampling. The 160 KB SRAM buffers large data bursts from accelerometers, gyroscopes, or environmental sensors before compression/streaming over USB or UART. Industrial -40C to +85C temperature range enables outdoor and automotive sensor hub deployment. The MPU isolates sensor-firmware updates from base firmware for security. Use an external 32.768 kHz crystal for RTC accuracy in time-stamped logging, and add a coin-cell backup for the RTC domain to preserve timestamps across power cycles.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATSAM4SD16CA-AU — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATSAM4SD16CB-AU | ATSAM4S16CA-AU | ATSAM4SD32CA-AU | ATSAM4SD16CA-CU | ATSAM4SD16BA-AU |
|---|---|---|---|---|---|---|
| Package | 100-LQFP (14x14) | 100-LQFP (14x14) - same | 100-LQFP - same | 100-LQFP (14x14) - same | 100-LQFP - same | 100-LQFP - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core | ARM Cortex-M4 120 MHz | ARM Cortex-M4 120 MHz | ARM Cortex-M4 120 MHz | ARM Cortex-M4 120 MHz | ARM Cortex-M4 120 MHz | ARM Cortex-M4 120 MHz |
| Flash Memory | 1 MB (dual-bank) | 1 MB (dual-bank) | 1 MB (single-bank) | 2 MB (dual-bank) | 1 MB (dual-bank) | 1 MB |
| SRAM | 160 KB | 160 KB | 160 KB | 160 KB | 160 KB | 160 KB |
| Operating Voltage | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.8/2.5/3.3 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Commercial 0C to +70C | Industrial -40C to +85C |
| Flash ECC / Lock Bits | Yes (dual-bank) | Yes (dual-bank) | No (single-bank) | Yes (dual-bank) | Yes (dual-bank) | Yes |
| Manufacturer Recommendation | Use Revision B for new designs | Recommended for new designs | Cost-reduced alternate | Higher-memory upgrade | Commercial-temp alternate | Earlier silicon revision |
Bảo phân biệt quan trọng
- Dual-bank Flash with ECC and lock bits (vsATSAM4S16CA-AU)
- Manufacturer-recommended Revision B for new designs (vsATSAM4SD16CA-AU (this part))
- Double Flash memory in same package (vsATSAM4SD16CA-AU vs ATSAM4SD32CA-AU)
Ghi chú thiết kế
The ATSAM4SD16CA-AU integrates a 1.2V core LDO regulator fed from VDDIN; place a 1 uF + 100 nF decoupling pair within 5 mm of VDDIN/VDDOUT pins per the manufacturer reference design. Add a 4.7 uF bulk capacitor on VDDIO and route VDDCORE pins directly to the internal LDO output with a star-ground topology. The internal regulator can source up to 100 mA, so avoid heavy GPIO switching loads on the same plane to prevent core-voltage ripple.
For USB applications, route the D+ and D- traces as a 90-ohm differential pair with matched lengths within 150 mil tolerance, and place the 12 MHz crystal within 5 mm of XIN/XOUT with a grounded guard ring. Keep PWM outputs isolated from analog ADC inputs by at least 3 trace widths to avoid switching noise coupling into ADC measurements. Use a 4-layer PCB with dedicated GND and power planes for the 100-LQFP, since the package has no exposed thermal pad.
Do not exceed 3.6V on VDDIO - the ATSAM4SD16CA-AU is NOT 5V tolerant. Always assert NRST after VDDIO reaches 1.62V minimum, or use the internal Brown-Out Detector (BOD) with the BOD33 threshold enabled in the fuses. For dual-bank Flash IAP, ensure the application linker script places new firmware in bank 1 and uses the EEFC FCR register sequence documented in the SAM4S datasheet; failing to disable interrupts during bank swap can corrupt the running image.
The 100-LQFP (14x14 mm) has a theta_JA of approximately 40 C/W on a 4-layer JEDEC test board, so the MCU dissipates safely up to ~1.5W at 85C ambient. For applications driving many GPIO at high switching rates, add copper pours under the package and vias to the GND plane to reduce thermal resistance. Avoid placing the MCU directly above a power dissipator without thermal isolation.
Thông tin tuân thủ
RoHS and lead-free confirmed per Microchip product page. AEC-Q100 not applicable - part is not automotive qualified; for automotive applications use SAMx7 automotive-grade variants.
