Microchip Technology

ATSAML11D16A-MF - 32MHz Cortex-M23 64KB MCU | Microchip

MPN: ATSAML11D16A-MF ✓ Hoạt động
<25 uA/MHz Id Chip-level tamper resistance Rds(on) 24-VQFN (4 x 4 mm) Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

ATSAML11D16A-MF Tóm tắt

The Microchip Technology ATSAML11D16A-MF is a 32-bit Arm Cortex-M23 microcontroller operating at up to 32 MHz, with 64 KB of embedded flash memory and 16 KB of SRAM in a 24-VQFN 4 x 4 mm package. It is a SAM L11 device featuring chip-level security and Arm TrustZone Technology for isolated execution environments.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one component. The Cortex-M23 MCU belongs to the Arm Cortex-M processor family, the embedded microcontroller hierarchy, and the broader semiconductor category. Compared with a discrete processor design, an MCU combines firmware execution, data storage, real-time control, and low-power operation in a compact surface-mount device.

Key features include a 32 MHz Cortex-M23 core, 64 KB flash, 16 KB SRAM, TrustZone support, secure key storage, and chip-level tamper resistance. According to the Microchip product page, the device consumes less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. These characteristics make it suitable for low-power connected equipment, secure access hardware, industrial controllers, and compact sensor nodes.

The ATSAML11D16A-MF family combines conventional embedded control with hardware-backed isolation. TrustZone can separate security-critical code and data from less trusted application code, while secure key storage supports protection of cryptographic assets. Chip-level tamper resistance adds physical security for devices exposed to theft, unauthorized enclosure access, or probing attempts.

Typical applications include low-power IoT endpoints, building-access terminals, electronic locks, secure industrial sensors, portable medical equipment, and compact industrial control modules. The combination of 64 KB flash, 16 KB SRAM, and low sleep current provides enough memory for protocol handling and control firmware while preserving battery life in duty-cycled systems.

PCB implementation should preserve the exposed-pad thermal and electrical requirements of the 24-VQFN package. Place decoupling capacitors close to the supply pins, connect the exposed pad to the ground plane using the manufacturer-recommended land pattern, and confirm programming, debug, reset, and clock connectivity before layout release. The tube packaging suffix should also be checked against the assembly process.

This page combines manufacturer specifications, package details, sourcing information, and engineering-focused comparison guidance to make ATSAML11D16A-MF selection more practical than a basic distributor specification summary.

Bộ thay thế dễ dàng lắp đặt cho ATSAML11D16A-MF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATSAML11D16A-MF (cùng hình factor và footprint) — khác nhau ở Package, Active Current, Operating Temperature, Program Memory (Flash), SRAM.

Microchip Technology
Package: 24-pin VQFN (4x4 mm)
Operating Temperature: -40C to +125C
Program Memory (Flash): 16 KB (16K x 8)
So sánh với ATSAML11D16A-MF →
Microchip Technology
Package: 24-pin VQFN (4x4 mm)
Active Current: <25 uA/MHz (typ, 3.3 V)
Operating Temperature: -40C to +125C (industrial)
So sánh với ATSAML11D16A-MF →
Microchip Technology
Package: 24-VQFN (4x4 mm) with exposed pad
Active Current: < 25 uA/MHz
Program Memory (Flash): 64 KB (64K x 8)
So sánh với ATSAML11D16A-MF →
Microchip Technology
Package: 32-VQFN (5x5 mm) with exposed pad
Active Current: < 25 µA/MHz
Operating Temperature: -40°C to +125°C
So sánh với ATSAML11D16A-MF →

ATSAML11D16A-MFKPH

✅ Drop-In
📦 24-VQFN (4 x 4 mm)
Same 32 MHz Cortex-M23 core and 64 KB flash; suffix-specific qualification and ordering conditions differ by up to 0% on stated core, clock, and memory ratings.

📋 Tham chiếu thay thế (không có trong danh mục)

ATSAML11D16A-MUT

✅ Drop-In
Microchip Technology
📦 24-VQFN (4 x 4 mm)
ARM Cortex-M23 (ARMv8-M, with TrustZone) · 32 MHz · 64 KB (64K x 8) · 16 KB · 1.62 V to 3.63 V · < 25 uA/MHz · < 100 nA

Liên hệ để biết giá

Xem tài liệu →

ATSAML11D16A-MUKPH

✅ Drop-In
📦 24-VQFN (4 x 4 mm)
Same 32 MHz Cortex-M23 core and 64 KB flash; suffix-specific qualification and ordering conditions differ by up to 0% on stated core, clock, and memory ratings.

📋 Tham chiếu thay thế (không có trong danh mục)

ATSAML11D16A-MFT

✅ Drop-In
Microchip Technology
📦 24-VQFN (4 x 4 mm)
ARM Cortex-M23 (32-bit) · Up to 32 MHz · 64 KB · 16 KB · 1.62 V to 3.63 V · <25 uA/MHz (typ, 3.3 V) · <100 nA (typ, full RAM retention) · -40C to +125C (industrial)

Liên hệ để biết giá

Xem tài liệu →

ATSAML11E15A-MFT

✅ Drop-In
Microchip Technology
📦 24-VQFN (4 x 4 mm)
ARM Cortex-M23 (ARMv8-M with TrustZone) · 32-bit · 32 MHz · 32 KB (32K x 8) · 8 KB · 1.62 V to 3.63 V · < 25 µA/MHz · < 100 nA

Liên hệ để biết giá

Xem tài liệu →

ATSAML11D16A-MF Tỷ lệ tối đa & tính chất điện

Product Type 32-bit ARM Cortex-M23 microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 64 KB
SRAM 16 KB
Architecture ARM Cortex-M23
Hộp 24-VQFN (4 x 4 mm)
Kiểu lắp đặt No-lead surface mount
Security Feature Arm TrustZone Technology
Secure Key Storage Supported
Tamper Resistance Chip-level tamper resistance
Active Mode Current <25 uA/MHz
Sleep Mode Current <100 nA
Temperature Grade 125 C
Crypto Capability Supported
Core Count 1

Hướng dẫn cấu hình chân ATSAML11D16A-MF 24-vqfn (4 x 4 mm)

Cấu hình chân cho ATSAML11D16A-MF (24-vqfn (4 x 4 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 24-vqfn (4 x 4 mm) cho ATSAML11D16A-MF

Không có dữ liệu chân cụ thể sẵn có cho ATSAML11D16A-MF.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ATSAML11D16A-MF phù hợp cho 6 Áp dụngs: Low-Power IoT Sensor Nodes, Secure Electronic Locks, Industrial Sensor Controllers, Medical Monitoring Devices, Building Access Terminals, Battery-Powered Portable Equipment.

🧩

Low-Power IoT Sensor Nodes

The ATSAML11D16A-MF suits compact sensor nodes that must balance firmware capacity with battery life. Its Cortex-M23 core operates at up to 32 MHz, while the manufacturer specifies less than 25 uA/MHz active consumption and less than 100 nA in sleep mode. The 64 KB flash and 16 KB SRAM allow protocol stacks, sensor control, and local buffering to coexist. Place the MCU between the sensor interface and a low-power communications module, then use a duty-cycled wake sequence to keep the radio and sensors off between measurements. A key trade-off is that active processing, debug activity, and peripheral clocks must be disabled to approach the stated sleep figure.

🔒

Secure Electronic Locks

The ATSAML11D16A-MF fits electronic locks because TrustZone, secure key storage, and chip-level tamper resistance address several security-sensitive stages of operation. The 32 MHz Cortex-M23 core can manage credential parsing, motor or latch control, communications, and diagnostic logging, with 64 KB flash for firmware and 16 KB SRAM for active processing. Security-critical key operations should remain in the protected execution environment, while application code should be isolated according to the Microchip TrustZone configuration. Consider the ATSAML11D16A-MFKPH variant when the enclosure or production environment requires different qualification conditions, but verify those conditions before release.

🏭

Industrial Sensor Controllers

The ATSAML11D16A-MF can serve as the central controller in a compact industrial sensing module that combines acquisition, local decision logic, and communications. Its 32 MHz Cortex-M23 core provides deterministic control capability, while 64 KB flash supports a bootloader, protocol handling, and application code. The 16 KB SRAM is useful for buffering samples and maintaining communication state. Keep analog and digital return paths separated, reference every supply rail, and use the exposed-pad land pattern to minimize thermal resistance. The low sleep current is particularly helpful in installations where the controller wakes for periodic measurement and then returns to sleep.

💊

Medical Monitoring Devices

The ATSAML11D16A-MF is suitable for compact monitoring and diagnostic peripherals that need hardware-assisted software isolation without the footprint of a larger MCU. TrustZone can separate protected routines from general application logic, while secure key storage supports keys used by authentication or encrypted communication. The 32 MHz core, 64 KB flash, and 16 KB SRAM are appropriate for sensor coordination, data filtering, user-interface control, and event logging. Medical designs still require application-specific safety, electrical, and regulatory validation. A conservative design should monitor supply rails, watchdog events, and fault states independently of the ordinary application loop.

🏢

Building Access Terminals

The ATSAML11D16A-MF fits access-control readers and credential terminals that manage local user interaction, credential processing, and network communication. Its Cortex-M23 core runs at up to 32 MHz, and 64 KB of flash supports a compact application and communication stack. TrustZone can isolate security-sensitive credential handling from non-critical interface code, while tamper resistance helps protect against enclosure attacks. The device's less-than-100 nA sleep specification can reduce standby consumption, although the wireless module, indicator LEDs, and reader front end will usually dominate system sleep current. Use ATSAML11D16A-MFKPH only after confirming its grade-specific requirements.

🔋

Battery-Powered Portable Equipment

The ATSAML11D16A-MF can act as the low-power control hub in battery-operated equipment such as portable measurement tools, condition-monitoring accessories, and compact personal devices. Its less-than-25 uA/MHz active figure supports efficient event-driven control, while less-than-100 nA sleep consumption helps preserve standby energy. The 64 KB flash and 16 KB SRAM provide sufficient capacity for firmware, protocol state, and short data records without requiring external memory. Design the power tree around the MCU's active and sleep currents, avoid continuous always-on peripherals, and measure current across the complete assembled product because sensors, displays, and radios can dominate the final budget.

Tóm tắt các sản phẩm được đề xuất

ATSAML11D16A-MFT Microchip Technology Được sử dụng trong: Low-Power IoT Sensor Nodes, Medical Monitoring Devices, Battery-Powered Portable Equipment ATSAML11D16A-MFKPH Same-family 24-VQFN MCU option Được sử dụng trong: Low-Power IoT Sensor Nodes, Industrial Sensor Controllers, Building Access Terminals ATSAML11D16A-MUKPH Same-family secure microcontroller ordering option Được sử dụng trong: Secure Electronic Locks, Medical Monitoring Devices, Battery-Powered Portable Equipment ATSAML11D16A-MUT Microchip Technology Được sử dụng trong: Secure Electronic Locks, Industrial Sensor Controllers, Building Access Terminals
What are the key specifications of ATSAML11D16A-MF that engineers should know?
The ATSAML11D16A-MF is a 32-bit Arm Cortex-M23 microcontroller with a 32 MHz maximum clock, 64 KB of flash, 16 KB of SRAM, and a 24-VQFN 4 x 4 mm package. It also provides TrustZone support, secure key storage, chip-level tamper resistance, less than 25 uA/MHz active consumption, and less than 100 nA sleep consumption, according to the Microchip product page and distributor technical summaries.
Where can I download the ATSAML11D16A-MF datasheet PDF?
The ATSAML11D16A-MF datasheet and supporting documents are available through the official Microchip ATSAML11D16A product page. Open the product page and locate its Documents or Data Sheets section for the manufacturer PDF. Use the same document for the final pin table, electrical characteristics, programming information, package drawing, and recommended land pattern.
What is the ATSAML11D16A-MF pinout and package footprint?
The ATSAML11D16A-MF uses a 24-VQFN package measuring 4 x 4 mm. Its exposed pad is part of the thermal and electrical land pattern and should be connected according to the manufacturer package drawing. Use the pin-description table and land pattern in the ATSAML11D16A datasheet when assigning tracks and vias rather than relying on a generic QFN footprint.
What security features does the ATSAML11D16A-MF provide?
The ATSAML11D16A-MF provides Arm TrustZone Technology, secure key storage, and chip-level tamper resistance. TrustZone supports hardware-assisted separation of trusted and untrusted software, while secure key storage protects sensitive cryptographic material. According to the Microchip product page, tamper resistance adds another layer for devices deployed in exposed physical environments.
How much power does the ATSAML11D16A-MF consume?
The ATSAML11D16A-MF consumes less than 25 uA/MHz in active mode and less than 100 nA in sleep mode, according to the Microchip product page. These figures make the MCU suitable for duty-cycled IoT equipment and other battery-powered products. Actual system current depends on clock configuration, peripherals, active time, and the selected sleep mode.
ATSAML11D16A-MF vs ATSAML11E15A-MF - which is better for 64 KB applications?
Choose ATSAML11D16A-MF when the application requires 64 KB of flash, while the D16 and E15 ordering codes indicate different memory capacities in the SAM L11 family. The ATSAML11D16A-MF provides 64 KB of flash and 16 KB of SRAM in the same 24-VQFN form used by the comparison candidate. Confirm peripheral compatibility and pin assignments in the manufacturer documentation before substitution.
Can ATSAML11D16A-MF be used in low-power IoT sensor nodes?
Yes, the ATSAML11D16A-MF fits low-power IoT sensor nodes because its active consumption is below 25 uA/MHz and sleep consumption is below 100 nA. Its 64 KB flash and 16 KB SRAM support compact protocol stacks, control logic, and event processing. Duty-cycle the radio and sensors, disable unused peripherals, and measure the assembled product current to confirm the power budget.
When should I choose ATSAML11D16A-MF over ATSAML11D16A-MFKPH?
Choose ATSAML11D16A-MF for a standard 64 KB, 32 MHz Cortex-M23 design unless the application requires the grade-specific qualification represented by the MFKPH ordering code. Both use the 24-VQFN 4 x 4 mm package and share the 64 KB flash and 16 KB SRAM configuration. For automotive production, verify temperature, qualification, and traceability requirements with Microchip.
What can replace ATSAML11D16A-MF on an existing PCB?
The closest listed drop-in candidates are ATSAML11D16A-MFKPH, ATSAML11D16A-MUT, ATSAML11D16A-MUKPH, ATSAML11D16A-MFT, and ATSAML11E15A-MF. They share the 24-VQFN format, but ordering-code, memory, qualification, and packing differences must be checked before replacement. A physical footprint match does not by itself confirm firmware, peripheral, or qualification compatibility.
Is ATSAML11D16A-MF the same as ATSAML11D16A-MUT?
No, ATSAML11D16A-MF and ATSAML11D16A-MUT are distinct ordering codes for the 24-VQFN SAM L11 MCU family. Both are described as Cortex-M23 devices with 32 MHz operation and 64 KB flash, but their suffix-specific qualification, temperature, or packing conditions can differ. Verify the full ordering information before treating them as interchangeable.
Is a Microchip ATSAML11D16A-MF equivalent available from another manufacturer?
No verified cross-brand, pin-to-pin 24-VQFN equivalent was identified for the ATSAML11D16A-MF. A cross-brand MCU with the same flash capacity would still require verification of Cortex core behavior, TrustZone implementation, peripheral mapping, programming, debug, and pin multiplexing. Use the listed same-manufacturer family parts as the primary drop-in candidates instead.
Where can I buy ATSAML11D16A-MF and check current lead time?
Use the Request a Quote form on this page to request ATSAML11D16A-MF availability, current lead time, and the required tube quantity. The manufacturer and distributor listings confirm the exact MPN, but stock and delivery schedules can change. Include your target quantity, date code requirement, and assembly packaging preference in the request.
What is the price of ATSAML11D16A-MF?
The current price of ATSAML11D16A-MF should be requested through the Request a Quote form on this page. Structured pricing is maintained for the exact ordering code and quantity break, while quote requests accommodate changing inventory, tube packaging, and volume requirements. Submit the required quantity to receive a current purchase quotation.
Is ATSAML11D16A-MF in stock?
Current ATSAML11D16A-MF inventory should be confirmed through the Request a Quote form on this page. Distributor listings report availability, but stock levels are mutable and may differ by package quantity, date code, and shipment destination. Provide your required quantity and production schedule so the quotation can confirm the appropriate supply.
What tools are compatible with the ATSAML11D16A-MF?
The ATSAML11D16A-MF uses an Arm Cortex-M23 core and is compatible with Microchip programming and debugging workflows for the SAM L11 family. The exact debugger, programmer, boot configuration, and field-update method must follow the ATSAML11D16A programming documentation. Confirm the supported tool version and the device settings before using a production programming station.

Dữ liệu tham khảo kỹ thuật cho ATSAML11D16A-MF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose ATSAML11D16A-MF when the design needs a 32 MHz Arm Cortex-M23 with 64 KB flash, 16 KB SRAM, TrustZone, secure key storage, chip-level tamper resistance, and a 24-VQFN 4 x 4 mm footprint. ATSAML11D16A-MFKPH or ATSAML11D16A-MUKPH are the closest family options when their suffix-specific qualification conditions fit the target product. Use ATSAML11D16A-MUT when its ordering conditions are preferable. ATSAML11D16A-MFT is the tape-and-reel option rather than the target tube configuration. ATSAML11E15A-MF should be selected only when its lower memory capacity still satisfies the application and firmware can fit. No verified cross-brand pin-to-pin equivalent was identified, so changing manufacturers requires a new package, peripheral, toolchain, and firmware qualification rather than a simple board substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ATSAML11D16A-MFKPH ATSAML11D16A-MUT ATSAML11D16A-MUKPH ATSAML11D16A-MFT ATSAML11E15A-MF
Package 24-VQFN (4 x 4 mm) 24-VQFN (4 x 4 mm) 24-VQFN (4 x 4 mm) 24-VQFN (4 x 4 mm) 24-VQFN (4 x 4 mm) 24-VQFN (4 x 4 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Core Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23
Maximum Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Architecture 32-bit 32-bit 32-bit 32-bit 32-bit 32-bit
Security Features TrustZone, secure key storage, chip-level tamper resistance SAM L11 security family SAM L11 security family SAM L11 security family SAM L11 security family SAM L11 security family

Bảo phân biệt quan trọng

  • Combines Cortex-M23 performance with hardware-assisted isolation (vsATSAML11E15A-MF)
  • Matches the core, clock, memory, and package of the primary ordering options (vsATSAML11D16A-MFKPH)
  • Supports security-oriented embedded control (vsATSAML11D16A-MUT)
  • Optimized for compact low-power control (vsATSAML11D16A-MFT)

Ghi chú thiết kế

Use the manufacturer ATSAML11D16A land pattern for the 24-VQFN footprint, including its exposed thermal pad. Place the exposed-pad vias within the recommended pattern rather than relying on an unrelated generic 24-VQFN drawing. Keep the pad connected to the ground plane, maintain short return paths, and preserve the package-specific solder mask and copper keepout dimensions.

Place the required bypass capacitors immediately beside the device supply and ground pins, with the shortest possible current loop. Separate sensitive analog supplies from switching nodes where practical, and follow the manufacturer voltage, decoupling, and startup recommendations. Verify brownout behavior and rail sequencing in hardware because firmware settings do not correct an incorrectly designed power tree.

The exposed pad is the primary thermal path in the 24-VQFN package. Provide continuous ground-plane copper beneath the device and use the recommended via arrangement to spread heat into the board. Estimated: device dissipation depends on supply voltage, core load, and peripheral activity, so calculate worst-case operating current before assigning copper area or defining the board's thermal rise target.

Do not select a suffix solely because its package drawing matches. Confirm flash capacity, SRAM, temperature grade, qualification, packing method, TrustZone configuration, and programming support for the exact ordering code. In particular, ATSAML11D16A-MF is supplied in a tube, while ATSAML11D16A-MFT is a distinct listing with different packing implications; both require assembly-process confirmation.

Route clock, debug, programming, and communication signals away from noisy switching stages and the exposed-pad connection where the topology permits. Provide clean ground references for external analog or sensor interfaces, and keep antenna keepout areas free of copper and components when the MCU is part of a wireless design. Validate signal integrity with the final stack-up rather than only the schematic.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer product page identifies the ATSAML11D16A family and its security capabilities but does not state the requested compliance statuses in the available product information.

Dữ liệu được xác minh vào: 2026-11-20 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ATSAML11D16A-MF datasheet ATSAML11D16A-MF pinout ATSAML11D16A-MF datasheet pdf ATSAML11D16A-MF equivalent ATSAML11D16A-MF replacement ATSAML11D16A-MF price ATSAML11D16A-MF stock Microchip ATSAML11D16A-MF ATSAML11D16A 24 VQFN pinout ATSAML11D16A-MF TrustZone security ATSAML11D16A-MF low power mode ATSAML11D16A-MF vs ATSAML11E15A-MF

Các bộ phận và thuật ngữ liên quan

Microchip Technology ATSAML11D16A-MF ATSAML11D16A-MFKPH ATSAML11D16A-MUT ATSAML11D16A-MUKPH ATSAML11D16A-MFT ATSAML11E15A-MF Arm Cortex-M23 SAM L11 microcontroller MCU embedded processor semiconductor 32-bit architecture Arm TrustZone Technology secure key storage chip-level tamper resistance cryptography 24-VQFN QFN package family surface-mount package embedded flash SRAM IoT sensor node low-power system
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ