ATSAML11D16A-MF - 32MHz Cortex-M23 64KB MCU | Microchip
Référence : ATSAML11D16A-MF ✓ ActifATSAML11D16A-MF Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one component. The Cortex-M23 MCU belongs to the Arm Cortex-M processor family, the embedded microcontroller hierarchy, and the broader semiconductor category. Compared with a discrete processor design, an MCU combines firmware execution, data storage, real-time control, and low-power operation in a compact surface-mount device.
Key features include a 32 MHz Cortex-M23 core, 64 KB flash, 16 KB SRAM, TrustZone support, secure key storage, and chip-level tamper resistance. According to the Microchip product page, the device consumes less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. These characteristics make it suitable for low-power connected equipment, secure access hardware, industrial controllers, and compact sensor nodes.
The ATSAML11D16A-MF family combines conventional embedded control with hardware-backed isolation. TrustZone can separate security-critical code and data from less trusted application code, while secure key storage supports protection of cryptographic assets. Chip-level tamper resistance adds physical security for devices exposed to theft, unauthorized enclosure access, or probing attempts.
Typical applications include low-power IoT endpoints, building-access terminals, electronic locks, secure industrial sensors, portable medical equipment, and compact industrial control modules. The combination of 64 KB flash, 16 KB SRAM, and low sleep current provides enough memory for protocol handling and control firmware while preserving battery life in duty-cycled systems.
PCB implementation should preserve the exposed-pad thermal and electrical requirements of the 24-VQFN package. Place decoupling capacitors close to the supply pins, connect the exposed pad to the ground plane using the manufacturer-recommended land pattern, and confirm programming, debug, reset, and clock connectivity before layout release. The tube packaging suffix should also be checked against the assembly process.
This page combines manufacturer specifications, package details, sourcing information, and engineering-focused comparison guidance to make ATSAML11D16A-MF selection more practical than a basic distributor specification summary.
Alternatives de remplacement direct pour ATSAML11D16A-MF — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATSAML11D16A-MF (même facteur de forme et même empreinte) — différant par Package, Active Current, Operating Temperature, Program Memory (Flash), SRAM.
ATSAML11D16A-MFKPH
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATSAML11D16A-MUT
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATSAML11D16A-MUKPH
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATSAML11D16A-MFT
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATSAML11E15A-MFT
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATSAML11D16A-MF Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M23 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB |
| SRAM | 16 KB |
| Architecture | ARM Cortex-M23 |
| Boîtier | 24-VQFN (4 x 4 mm) |
| Type de montage | No-lead surface mount |
| Security Feature | Arm TrustZone Technology |
| Secure Key Storage | Supported |
| Tamper Resistance | Chip-level tamper resistance |
| Active Mode Current | <25 uA/MHz |
| Sleep Mode Current | <100 nA |
| Temperature Grade | 125 C |
| Crypto Capability | Supported |
| Core Count | 1 |
Guide de configuration des broches du ATSAML11D16A-MF 24-vqfn (4 x 4 mm)
Configuration des broches du ATSAML11D16A-MF (boîtier 24-vqfn (4 x 4 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATSAML11D16A-MF.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATSAML11D16A-MF convient pour 6 applications: Low-Power IoT Sensor Nodes, Secure Electronic Locks, Industrial Sensor Controllers, Medical Monitoring Devices, Building Access Terminals, Battery-Powered Portable Equipment.
Low-Power IoT Sensor Nodes
The ATSAML11D16A-MF suits compact sensor nodes that must balance firmware capacity with battery life. Its Cortex-M23 core operates at up to 32 MHz, while the manufacturer specifies less than 25 uA/MHz active consumption and less than 100 nA in sleep mode. The 64 KB flash and 16 KB SRAM allow protocol stacks, sensor control, and local buffering to coexist. Place the MCU between the sensor interface and a low-power communications module, then use a duty-cycled wake sequence to keep the radio and sensors off between measurements. A key trade-off is that active processing, debug activity, and peripheral clocks must be disabled to approach the stated sleep figure.
Recommandé
Secure Electronic Locks
The ATSAML11D16A-MF fits electronic locks because TrustZone, secure key storage, and chip-level tamper resistance address several security-sensitive stages of operation. The 32 MHz Cortex-M23 core can manage credential parsing, motor or latch control, communications, and diagnostic logging, with 64 KB flash for firmware and 16 KB SRAM for active processing. Security-critical key operations should remain in the protected execution environment, while application code should be isolated according to the Microchip TrustZone configuration. Consider the ATSAML11D16A-MFKPH variant when the enclosure or production environment requires different qualification conditions, but verify those conditions before release.
Recommandé
Industrial Sensor Controllers
The ATSAML11D16A-MF can serve as the central controller in a compact industrial sensing module that combines acquisition, local decision logic, and communications. Its 32 MHz Cortex-M23 core provides deterministic control capability, while 64 KB flash supports a bootloader, protocol handling, and application code. The 16 KB SRAM is useful for buffering samples and maintaining communication state. Keep analog and digital return paths separated, reference every supply rail, and use the exposed-pad land pattern to minimize thermal resistance. The low sleep current is particularly helpful in installations where the controller wakes for periodic measurement and then returns to sleep.
Recommandé
Medical Monitoring Devices
The ATSAML11D16A-MF is suitable for compact monitoring and diagnostic peripherals that need hardware-assisted software isolation without the footprint of a larger MCU. TrustZone can separate protected routines from general application logic, while secure key storage supports keys used by authentication or encrypted communication. The 32 MHz core, 64 KB flash, and 16 KB SRAM are appropriate for sensor coordination, data filtering, user-interface control, and event logging. Medical designs still require application-specific safety, electrical, and regulatory validation. A conservative design should monitor supply rails, watchdog events, and fault states independently of the ordinary application loop.
Recommandé
Building Access Terminals
The ATSAML11D16A-MF fits access-control readers and credential terminals that manage local user interaction, credential processing, and network communication. Its Cortex-M23 core runs at up to 32 MHz, and 64 KB of flash supports a compact application and communication stack. TrustZone can isolate security-sensitive credential handling from non-critical interface code, while tamper resistance helps protect against enclosure attacks. The device's less-than-100 nA sleep specification can reduce standby consumption, although the wireless module, indicator LEDs, and reader front end will usually dominate system sleep current. Use ATSAML11D16A-MFKPH only after confirming its grade-specific requirements.
Recommandé
Battery-Powered Portable Equipment
The ATSAML11D16A-MF can act as the low-power control hub in battery-operated equipment such as portable measurement tools, condition-monitoring accessories, and compact personal devices. Its less-than-25 uA/MHz active figure supports efficient event-driven control, while less-than-100 nA sleep consumption helps preserve standby energy. The 64 KB flash and 16 KB SRAM provide sufficient capacity for firmware, protocol state, and short data records without requiring external memory. Design the power tree around the MCU's active and sleep currents, avoid continuous always-on peripherals, and measure current across the complete assembled product because sensors, displays, and radios can dominate the final budget.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATSAML11D16A-MF — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATSAML11D16A-MFKPH | ATSAML11D16A-MUT | ATSAML11D16A-MUKPH | ATSAML11D16A-MFT | ATSAML11E15A-MF |
|---|---|---|---|---|---|---|
| Package | 24-VQFN (4 x 4 mm) | 24-VQFN (4 x 4 mm) | 24-VQFN (4 x 4 mm) | 24-VQFN (4 x 4 mm) | 24-VQFN (4 x 4 mm) | 24-VQFN (4 x 4 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Core | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 |
| Maximum Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Security Features | TrustZone, secure key storage, chip-level tamper resistance | SAM L11 security family | SAM L11 security family | SAM L11 security family | SAM L11 security family | SAM L11 security family |
Principaux différenciateurs
- Combines Cortex-M23 performance with hardware-assisted isolation (vs ATSAML11E15A-MF)
- Matches the core, clock, memory, and package of the primary ordering options (vs ATSAML11D16A-MFKPH)
- Supports security-oriented embedded control (vs ATSAML11D16A-MUT)
- Optimized for compact low-power control (vs ATSAML11D16A-MFT)
Notes de conception
Use the manufacturer ATSAML11D16A land pattern for the 24-VQFN footprint, including its exposed thermal pad. Place the exposed-pad vias within the recommended pattern rather than relying on an unrelated generic 24-VQFN drawing. Keep the pad connected to the ground plane, maintain short return paths, and preserve the package-specific solder mask and copper keepout dimensions.
Place the required bypass capacitors immediately beside the device supply and ground pins, with the shortest possible current loop. Separate sensitive analog supplies from switching nodes where practical, and follow the manufacturer voltage, decoupling, and startup recommendations. Verify brownout behavior and rail sequencing in hardware because firmware settings do not correct an incorrectly designed power tree.
The exposed pad is the primary thermal path in the 24-VQFN package. Provide continuous ground-plane copper beneath the device and use the recommended via arrangement to spread heat into the board. Estimated: device dissipation depends on supply voltage, core load, and peripheral activity, so calculate worst-case operating current before assigning copper area or defining the board's thermal rise target.
Do not select a suffix solely because its package drawing matches. Confirm flash capacity, SRAM, temperature grade, qualification, packing method, TrustZone configuration, and programming support for the exact ordering code. In particular, ATSAML11D16A-MF is supplied in a tube, while ATSAML11D16A-MFT is a distinct listing with different packing implications; both require assembly-process confirmation.
Route clock, debug, programming, and communication signals away from noisy switching stages and the exposed-pad connection where the topology permits. Provide clean ground references for external analog or sensor interfaces, and keep antenna keepout areas free of copper and components when the MCU is part of a wireless design. Validate signal integrity with the final stack-up rather than only the schematic.
Informations de conformité
The manufacturer product page identifies the ATSAML11D16A family and its security capabilities but does not state the requested compliance statuses in the available product information.