ATTINY24A-CCU - 20MHz AVR 2KB Flash MCU | Microchip Technology
MPN: ATTINY24A-CCU ✓ Hoạt độngATTINY24A-CCU Tóm tắt
An 8-bit AVR microcontroller is a low-complexity embedded processor that executes instructions using an accumulator-and-register architecture. The ATTINY24A belongs to Microchip's ATtiny family and combines general-purpose I/O, timers, analog conversion, serial communication, and nonvolatile program and data memory in one compact device. Its picoPower architecture is intended to balance responsive processing with low power consumption in battery-operated and embedded systems.
Key features include a 20 MHz clock, 2 KB of ISP Flash, 128 bytes of EEPROM, 128 bytes of SRAM, and 12 general-purpose I/O lines. An 8-bit timer/counter provides two PWM channels, while the device also incorporates USI and ADC functionality. These resources allow the ATTINY24A-CCU to handle sensing, control, communication, and actuator tasks without requiring a larger external processor.
The microcontroller's compact 3 x 3 mm 15-UFBGA package makes it suitable for space-constrained products. The manufacturer identifies the device as an industrial-temperature part with a 1.8 V to 5.5 V operating range. Its memory organization supports small firmware images, while EEPROM provides nonvolatile storage for calibration values, configuration parameters, and operating counters. SRAM remains comparatively limited, so firmware should avoid unnecessary buffering and deep call nesting.
Typical uses include low-cost sensor interfaces, LED lighting controllers, compact motor controls, industrial modules, and small consumer products. The ADC is useful for analog measurements, while the USI can support serial communication arrangements. The two PWM outputs are useful for dimming, proportional control, or driving low-power loads, subject to the electrical limits of the selected I/O and power-supply design.
PCB design should preserve access to programming and power pins while accounting for the compact BGA land pattern. Place decoupling capacitance close to the supply pins, route high-current and sensitive analog signals deliberately, and follow the manufacturer's pin and land-pattern guidance. Because the package is only 3 x 3 mm, assembly capability, solder paste volume, and inspection access should be confirmed before committing to volume production.
This product page combines the manufacturer's device description, package and memory characteristics, ordering information, verified distribution listings, engineering application guidance, and a specification comparison for faster component selection and PCB planning.
Bộ thay thế dễ dàng lắp đặt cho ATTINY24A-CCU — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếATTINY24A-CCU Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit AVR RISC microcontroller |
| Tần số xung maksimum | 20 MHz |
| Flash Memory | 2 KB (1K x 16) |
| EEPROM Memory | 128 bytes |
| SRAM | 128 bytes |
| General-Purpose I/O Lines | 12 |
| General-Purpose Working Registers | 32 |
| Timer/Counter | 8-bit timer/counter |
| PWM Channels | 2 |
| ADC | Available |
| USI | Available |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Temperature Grade | Industrial |
| Hộp | 15-UFBGA (3 x 3 mm) |
| Programming | In-system programming |
Hướng dẫn cấu hình chân ATTINY24A-CCU 15-ufbga (3 x 3 mm)
Cấu hình chân cho ATTINY24A-CCU (15-ufbga (3 x 3 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATTINY24A-CCU.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATTINY24A-CCU phù hợp cho 6 Áp dụngs: Compact Sensor Interface, LED Dimming Controller, Industrial Control Module, Low-Power Data Logger, Small Motor Control, Portable Consumer Accessory.
Compact Sensor Interface
The ATTINY24A-CCU fits compact sensor modules that need local conversion, configuration, and control without a larger processor. Its 10-bit ADC capability can sample analog sensor signals, while the USI provides a path to serial communication with a host or peripheral. The 20 MHz clock allows responsive filtering and calibration, and 2 KB of ISP Flash accommodates a focused embedded firmware image. With only 128 bytes of SRAM, the firmware should process samples incrementally rather than buffering large histories. The 3 x 3 mm 15-UFBGA package also reduces board area, although the compact land pattern requires assembly capability suited to fine-pitch BGAs.
LED Dimming Controller
The ATTINY24A-CCU is suitable for compact LED dimming and lighting-control modules because its timer/counter provides two PWM channels and its 12 I/O lines support switches, indicators, and fault signaling. The 20 MHz operating clock gives adequate control-loop headroom for flicker management and current adjustment, while the ADC can monitor a feedback or sensing input. The device operates from 1.8 V to 5.5 V, allowing integration with both low-voltage and 5 V lighting architectures. Designers should size the PWM and ADC pathways independently because only two PWM outputs are available, and should ensure the LED driver remains electrically isolated from sensitive timing functions.
Industrial Control Module
The ATTINY24A-CCU works well in small industrial-control modules that combine discrete inputs, local feedback, and a serial supervisory interface. Twelve general-purpose I/O lines can handle digital controls, while the ADC supports analog process monitoring and the USI assists with peripheral communication. Its industrial-temperature classification makes it appropriate for temperature ranges beyond typical consumer-only designs, subject to correct decoupling and enclosure design. The 20 MHz clock and 2 KB Flash constrain firmware complexity, so divide larger functions among neighboring controllers and retain only real-time decisions on this device.
Low-Power Data Logger
The ATTINY24A-CCU can serve as the controller in a small, periodically active data logger when application data can fit within its 2 KB program memory and 128 bytes of SRAM. The picoPower architecture supports the low-power operating concept, and the ADC can acquire the quantity being logged. EEPROM provides 128 bytes of nonvolatile storage for counters, calibration constants, or a small status record. Firmware should wake only when required, sample and store incrementally, and return the device to sleep to conserve battery energy. The 3 x 3 mm package helps reduce board size, but regulator quiescent current and sensor standby behavior will dominate final battery life.
Small Motor Control
The ATTINY24A-CCU is suitable for modest motor or actuator-control tasks where size and power matter more than extensive computation. Its two PWM outputs can command a driver stage, and the ADC can support basic current, position, or speed feedback when the external signal is properly conditioned. The 20 MHz clock provides timely control-loop execution, while 128 bytes of SRAM is adequate for simple state machines that avoid large motion buffers. A microcontroller cannot safely drive a motor directly; use a suitable driver, protection circuitry, and a defined fault shutdown path. Validate stall current and thermal performance in the final mechanical system.
Portable Consumer Accessory
The ATTINY24A-CCU fits small portable accessories that require a few inputs, a serial link, and compact board area. Its 15-UFBGA package leaves more room for batteries, sensors, connectors, or RF circuitry, and the 1.8 V to 5.5 V operating range supports low-energy power architectures. The 20 MHz AVR core can manage button handling, status LEDs, and simple accessory protocols, while USI and ADC broaden the available peripheral options. Firmware must remain compact because Flash is 2 KB and SRAM is 128 bytes. Verify connector accessibility, programming access, and assembly yield before using such a small package in a high-volume consumer design.
Dữ liệu tham khảo kỹ thuật cho ATTINY24A-CCU — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 15-UFBGA (3 x 3 mm) |
| Brand | Microchip Technology |
| Architecture | 8-bit AVR RISC |
| Maximum Clock Frequency | 20 MHz |
| Flash Memory | 2 KB |
| EEPROM Memory | 128 bytes |
| SRAM | 128 bytes |
| General-Purpose I/O | 12 lines |
| PWM Channels | 2 |
| Operating Voltage | 1.8 V to 5.5 V |
Bảo phân biệt quan trọng
- Compact 20 MHz AVR implementation (vsATTINY24V-10SSUR)
- More compact package than the SOIC family option (vsATTINY24A-SSU)
- Broader clock-rate choice within the ATtiny24A family (vsATTINY20-CCUR)
Ghi chú thiết kế
Treat the 15-UFBGA as a fine-pitch assembly design. Follow the manufacturer land pattern and solder-mask recommendations exactly, confirm the PCB pad dimensions against the current datasheet, and validate the stencil aperture and paste volume during process qualification. The 3 x 3 mm body provides little visual access, so consider X-ray inspection and plan for pin-1 orientation controls in the assembly documentation.
Place the required supply decoupling capacitors close to the device power pins and keep the return path short. The operating range of 1.8 V to 5.5 V does not remove the need to select capacitors with suitable DC-bias derating and temperature characteristics. If an ADC is used, separate or carefully partition analog and digital supply paths so switching activity on the main rail does not introduce unnecessary measurement error.
Do not confuse the -CCU 15-UFBGA ordering option with the -SSU 14-pin SOIC device. The packages do not share a PCB footprint. Also avoid designing around the full 2 KB Flash for features that are not required at startup; with 128 bytes of SRAM, large local arrays and deep buffered processing can cause stack or heap exhaustion. Review the exact fuse, clock, and memory map during firmware bring-up.
Keep the ISP programming interface accessible and route it away from switching nodes and high-current motor paths. Place sensitive ADC inputs away from clock edges, inductor fields, and fast digital return currents. For designs using USI, check line capacitance and pull-up requirements under the selected operating voltage. A short ground return and a continuous ground plane generally provide more reliable behavior than fragmented routing around the compact package.
Thông tin tuân thủ
The component is identified as an industrial-temperature ATtiny24A-family device, but specific environmental and material-compliance declarations were not identified for the exact ordering code.