C8051F047-GQ - 25MHz 8-Bit MCU with 32KB Flash | Silicon Labs
MPN: C8051F047-GQ ✓ Hoạt độngC8051F047-GQ Tóm tắt
An 8-bit microcontroller is a programmable semiconductor integrated circuit whose CPU, memory, and peripherals operate around an 8-bit data path. The C8051F04x family combines an 8051-compatible instruction architecture with enhanced peripherals and in-system programmability. In the product hierarchy, the C8051F047-GQ is a microcontroller, a type of embedded processor and embedded semiconductor used to monitor sensors, process control logic, and manage communication interfaces.
Principal features include 32 KB of ISP Flash, 4352 bytes of on-chip RAM, operation up to 25 MHz, and two separate high-speed ADC subsystems. The converters can provide 10-bit or 12-bit resolution at 100 kSPS, or 8-bit resolution at 500 kSPS, allowing designers to balance conversion speed against measurement resolution. The device also includes CAN connectivity, as identified in the C8051F04x product description.
The mixed-signal architecture is important because the C8051F047-GQ can acquire analog measurements and execute control functions without requiring a separate high-speed converter for many applications. Its pipelined CIP-51 core supports the 25 MHz operating class while retaining compatibility with the established 8051 software ecosystem. Programmable flash permits field updates and configuration storage, while the dedicated ADC resources support sensing and control loops.
Typical applications include industrial process monitoring, factory automation, CAN-connected machine controls, building equipment, environmental measurement systems, and compact embedded instruments. The combination of 32 KB Flash, 4.25 KB RAM, mixed-signal conversion, and CAN is especially useful when several local measurements must be combined with dependable network communication.
PCB implementation requires careful attention to high-speed clock routing, analog input grounding, decoupling, and exposed-pad or package thermal requirements where applicable. Follow the pin-description table and layout guidance in the manufacturer datasheet when assigning tracks. Firmware should also be validated for the selected clock source, ADC configuration, CAN timing, and any production-programming procedure before deployment.
This page combines the exact C8051F047-GQ configuration, application guidance, parameter comparisons, and replacement considerations with the practical information engineers need for schematic capture, PCB layout, firmware planning, and sourcing. For current commercial availability, use the Request a Quote form on this page.
Bộ thay thế dễ dàng lắp đặt cho C8051F047-GQ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với C8051F047-GQ (cùng hình factor và footprint) — khác nhau ở Package, ADC Maximum Sampling Rate, ADC Resolution, ADC Subsystems, Microcontroller Type.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếC8051F047-GQ Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit mixed-signal microcontroller |
| Maximum CPU Frequency | 25 MHz |
| CPU Architecture | 8051-compatible CIP-51 pipelined core |
| Flash Memory | 32 KB (32K x 8), in-system programmable |
| On-Chip RAM | 4352 bytes (4096 + 256 bytes) |
| ADC Resolution Options | 10-bit or 12-bit at 100 kSPS; 8-bit at 500 kSPS |
| ADC Subsystems | 2 separate high-speed ADC subsystems |
| ADC Channel Count | 10 channels |
| Communication Interface | CAN |
| Program Memory Type | ISP Flash |
| Hộp | 64-pin TQFP, 10 mm x 10 mm |
| Kiểu lắp đặt | Surface mount |
| Data Word Width | 8-bit |
| Core Family | C8051F04x |
| ADC Maximum Sampling Rate | 500 kSPS at 8-bit resolution |
Hướng dẫn cấu hình chân C8051F047-GQ 64-pin tqfp, 10 mm x 10 mm
Cấu hình chân cho C8051F047-GQ (64-pin tqfp, 10 mm x 10 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho C8051F047-GQ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
C8051F047-GQ phù hợp cho 6 Áp dụngs: CAN-Connected Machine Control, Industrial Sensor Monitoring, Building Equipment Control, Environmental Data Acquisition, Embedded Test and Measurement, Programmable Control Module.
CAN-Connected Machine Control
The C8051F047-GQ fits CAN-connected machine controllers that combine local I/O, analog process measurement, and higher-level machine coordination. Its 25 MHz CIP-51 core can execute control logic while the two ADC subsystems support measurements at up to 500 kSPS in 8-bit mode or 100 kSPS at 10-bit or 12-bit resolution. The 32 KB ISP Flash accommodates application firmware and field-update capability. Use an external CAN transceiver, protected routing, proper bus termination, and carefully isolated grounds to preserve communication reliability.
Được đề xuất
Industrial Sensor Monitoring
For industrial sensor monitoring, the C8051F047-GQ combines 10 ADC channels with a 25 MHz processing core and 4352 bytes of RAM in a compact 64-pin TQFP package. The converter can be configured for 8-bit, 10-bit, or 12-bit operation, allowing the firmware to trade sampling rate against resolution according to sensor accuracy and control-loop requirements. Place analog inputs away from switching nodes, provide local reference bypassing, and calibrate gain and offset in software. The ISP Flash also supports configuration changes during maintenance without replacing the controller.
Được đề xuất
Building Equipment Control
The C8051F047-GQ is appropriate for building equipment controllers that monitor mixed analog inputs while coordinating operation over CAN. Its dual high-speed ADC subsystems provide flexible sampling rates for sensors ranging from relatively slow temperature measurements to faster supervisory signals. At the same time, the 25 MHz core supports protocol handling, operating logic, and local diagnostics within 32 KB of Flash and 4.25 KB of RAM. Hardware design should include watchdog recovery, brownout analysis, EMI filtering, and safe output states for connected actuators.
Được đề xuất
Environmental Data Acquisition
Environmental acquisition systems can use the C8051F047-GQ to sample multiple sensor inputs and process local measurements in a compact embedded controller. The 10-channel ADC arrangement and selectable 100 kSPS or 500 kSPS modes allow design teams to match acquisition bandwidth to the behavior of the measured environment. The 25 MHz CPU supports filtering and data organization, while CAN can transfer results to a larger monitoring network. Use shielded sensor wiring, dedicated analog grounding, input protection, and periodic offset and gain calibration for dependable measurements.
Được đề xuất
Embedded Test and Measurement
The C8051F047-GQ suits compact instrumentation that needs high-speed sampling, local control, and CAN connectivity in one device. Its ADC subsystems can select 8-bit resolution at 500 kSPS for fast capture or 10-bit or 12-bit resolution at 100 kSPS for greater measurement precision. The 32 KB ISP Flash stores measurement routines, calibration constants, and communication firmware, while 4352 bytes of RAM supports working buffers. Analog layout, reference stability, excitation settling, and channel multiplexing must be validated as a complete signal chain.
Được đề xuất
Programmable Control Module
The C8051F047-GQ can serve as the central controller in a programmable automation module with analog monitoring, logic execution, and CAN communications. Its 25 MHz 8051-compatible core offers a familiar development path, and 32 KB of ISP Flash provides sufficient code space for coordinated control functions. Two separate ADC subsystems increase measurement flexibility, while the 64-pin TQFP package exposes the required I/O and communication resources. Validate startup sequencing, watchdog behavior, ESD protection, and firmware update security before field deployment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho C8051F047-GQ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Silicon Labs |
| Package | 64-pin TQFP, 10 mm x 10 mm |
| CPU Architecture | 8051-compatible CIP-51 pipelined core |
| Maximum CPU Frequency | 25 MHz |
| Flash Memory | 32 KB ISP Flash |
| On-Chip RAM | 4352 bytes |
| ADC Configuration | 2 subsystems, 10 channels total |
| ADC Resolution and Rate | 10-bit or 12-bit at 100 kSPS; 8-bit at 500 kSPS |
| Communication Interface | CAN |
Bảo phân biệt quan trọng
- Integrated dual high-speed ADC subsystem (vsC8051F005-GQ)
- CAN connectivity for networked control (vsC8051F005-GQ)
- Mixed-signal processing in one 64-pin device (vsC8051F005-GQ)
Ghi chú thiết kế
Route the 25 MHz clock using short traces, a continuous reference plane, and isolation from ADC inputs and switching nodes. Place the required clock and decoupling components close to their associated pins according to the manufacturer datasheet, and avoid long stubs or vias in sensitive clock paths. Keep analog inputs away from CAN and high-current switching routes to reduce conversion noise and timing disturbance.
Assign all 64 package pins from the exact C8051F04x pin-description table rather than relying on a generic 64-pin symbol. Verify analog input multiplexing, reference pins, reset, oscillator connections, programming signals, and CAN functions during schematic review. Separate analog and digital return paths where the datasheet layout guidance calls for partitioning, and provide a stable quiet ground region beneath sensitive conversion circuitry.
Do not treat the GQ and GQR ordering suffixes as interchangeable without checking reel orientation and packing documentation. Also avoid selecting a similarly named C8051-family MCU solely because it uses a 64-pin TQFP package; function-level pin compatibility requires a complete comparison of power pins, ADC channels, timers, clock pins, programming signals, and CAN connections. Confirm the chosen configuration against the production BOM and programming fixture requirements.
Thông tin tuân thủ
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for this exact ordering suffix.