CD4018BMT - 8.5MHz Divide-by-N Counter | Texas Instruments
MPN: CD4018BMT ✓ Hoạt độngCD4018BMT Tóm tắt
A divide-by-N counter is a digital logic IC that generates one output pulse for every N input-clock pulses. The CD4018BMT belongs to the CMOS counter and logic-IC hierarchy, combining a counter stage, programmable modulus control, and asynchronous preset and clock inputs. This makes it useful between a system oscillator and a slower sequential circuit, reducing a repetitive clock without requiring a programmable processor or complex divider chain.
The primary device characteristics include a 5-bit programmable counter section, positive-edge operation, operation in the CD4000B logic family, and an 8.5 MHz maximum listed frequency. The 16-pin SOIC package provides a compact surface-mount footprint for industrial control, test equipment, instrumentation, and embedded digital systems. Because it is a fixed-function counter, the CD4018BMT offers simpler firmware-independent timing than a microcontroller-based divider.
The CD4018BMT uses CMOS construction, which supports low static power relative to many older bipolar logic families. Its clock and control inputs are designed for normal CMOS signal levels, so system designers should verify input rise and fall times, supply voltage, and fanout against the operating conditions in the manufacturer datasheet. Decoupling close to the supply pins remains important when the counter drives clocked or switching circuitry at higher frequencies.
Typical uses include frequency division in timing modules, programmable pulse-generation circuits, digital test equipment, phase and frequency counters, and clock-staging logic. It is particularly useful when the required divide ratio is known and must remain independent of firmware. The positive-edge trigger provides predictable operation in cascaded counter arrangements, although reset and preset behavior must be coordinated to avoid unwanted intermediate states.
For reliable PCB implementation, place the device on a stable ground plane, route the clock away from switching-node traces, and use a dedicated local supply bypass capacitor close to the IC. Confirm that the clock source does not exceed the stated 8.5 MHz operating limit and that preset and reset inputs remain controlled during initialization. These precautions reduce false transitions and make the counter behavior repeatable.
This page combines the manufacturer identification, package and frequency characteristics, qualified family alternatives, application guidance, and practical design considerations into an engineering-focused view of the CD4018BMT. It helps designers determine whether this fixed-function CMOS counter satisfies their timing, packaging, and replacement requirements.
Bộ thay thế dễ dàng lắp đặt cho CD4018BMT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CD4018BMT (cùng hình factor và footprint) — khác nhau ở Counter Type, Package.
CD4018BM
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CD4018BM96
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CD4018BNSR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CD4018BMT Tỷ lệ tối đa & tính chất điện
| Counter Type | Presettable divide-by-N counter |
| Logic Family | CD4000B CMOS |
| Number of Counter Elements | 1 element |
| Counter Width | 5 bit |
| Maximum Operating Frequency | 8.5 MHz |
| Trigger Type | Positive edge |
| Divide Range | 2 to 10 |
| Output Levels | CMOS |
| Hộp | 16-pin SOIC |
| Kiểu lắp đặt | Surface mount |
| Package Body Width | 3.90 mm |
| Package Lead Pitch | 1.27 mm |
| Presettable | Yes |
Hướng dẫn cấu hình chân CD4018BMT 1.27 mm
Cấu hình chân cho CD4018BMT (1.27 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho CD4018BMT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CD4018BMT phù hợp cho 6 Áp dụngs: Programmable Frequency Divider, Digital Test and Measurement Timing, Pulse Generator and Sequencer, Industrial Control Event Counter, Instrumentation Clock Scaling, Frequency-to-Digital Interface.
Programmable Frequency Divider
The CD4018BMT fits programmable frequency-divider stages because it divides a positive-edge clock by a selectable value from 2 through 10 while operating up to 8.5 MHz. Place the counter between a periodic oscillator and a slower timing circuit, then select the divide ratio required by the downstream stage. This fixed-function approach eliminates counter firmware and produces a predictable pulse for each selected group of input cycles. The principal design checks are clock-edge quality, preset and reset sequencing, and keeping the source frequency within the 8.5 MHz listed limit.
Được đề xuất
Digital Test and Measurement Timing
CD4018BMT is applicable in digital test and measurement equipment that needs a stable, reduced clock without programmable controller overhead. Its 8.5 MHz listed operating frequency allows it to process a faster reference and generate a lower-rate trigger stream for counters, timing gates, or sampling-control logic. Use the positive-edge input to establish a defined counting event and coordinate reset and preset inputs during initialization. Validate propagation delay against the timing budget of the measured or stimulated channel before releasing the design to production.
Được đề xuất
Pulse Generator and Sequencer
The CD4018BMT can generate a periodic pulse train when its input clock and programmable division ratio are configured as a simple pulse-generation stage. Positive-edge operation gives each clock event a clear counting role, while divide ratios from 2 through 10 provide practical frequency scaling. In a sequential design, use the reset and preset controls to establish a known starting condition and prevent an unintended first count. Include hysteresis or appropriate clock conditioning at the source if the oscillator waveform can cross the input threshold slowly.
Được đề xuất
Industrial Control Event Counter
CD4018BMT suits industrial control modules that must count recurring events and reduce them into a slower control pulse. Its positive-edge trigger permits counting one event per transition, and the 8.5 MHz listed operating frequency provides ample timing margin for many low-to-medium-rate event sources. Keep long external traces away from the clock input, provide a stable ground plane, and add local supply bypassing to reduce noise-induced false counts. For safety-related production use, verify the exact suffix's operating-temperature and qualification requirements before deployment.
Được đề xuất
Instrumentation Clock Scaling
The CD4018BMT can scale a high-frequency internal clock into a lower-rate signal for instrumentation, timing, and control subcircuits. Its programmable division from 2 through 10 makes it useful when several subsystems require related but reduced clock rates without adding complex digital logic. Place the counter close to the receiving circuitry, preserve a continuous return path for the clock, and isolate the clock trace from switching nodes. Check the accumulated counter delay and output transition behavior against the instrument's timing margin.
Được đề xuất
Frequency-to-Digital Interface
CD4018BMT can serve as the fixed divider in an interface that converts a repetitive source frequency into a slower digital event. This arrangement is useful in alarm, timing, and repetitive-event modules where firmware does not need to count every source transition. The counter's 8.5 MHz listed operating frequency defines the upper signal-processing range, while its programmable modulus determines the event rate presented downstream. Define reset and preset states in hardware so the interface remains deterministic during power-up and fault recovery.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CD4018BMT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CD4018BM | CD4018BM96 | CD4018BNSR |
|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Counter Type | Presettable divide-by-N counter | Presettable divide-by-N counter | Presettable divide-by-N counter | Presettable divide-by-N counter |
| Counter Width | 5 bit | 5 bit | 5 bit | 5 bit |
| Maximum Operating Frequency | 8.5 MHz | 8.5 MHz | 8.5 MHz | 8.5 MHz |
| Trigger Type | Positive edge | Positive edge | Positive edge | Positive edge |
| Logic Family | CD4000B CMOS | CD4000B CMOS | CD4000B CMOS | CD4000B CMOS |
| Presettable | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Exact-ordering match with the same counter characteristics (vsCD4018BM)
- Same-family replacement without changing the core counter function (vsCD4018BM96)
- Presettable fixed-function architecture (vsCD4018BNSR)
Ghi chú thiết kế
Route the positive-edge clock as a short, continuous trace with a nearby ground reference and keep it separated from switching-node and high-current paths. A slow clock edge can make the counter more susceptible to multiple transitions near the switching threshold, so use a clean oscillator or buffer when the source has high capacitance or a slow rise or fall time. Confirm the timing behavior against the manufacturer diagrams for the intended supply voltage and load.
Place the local supply bypass capacitor close to the CD4018BMT power and ground connections, and maintain an uninterrupted ground plane beneath the IC and its clock network. Avoid routing the clock between potential sources of crosstalk. PCB traces should follow the package drawing for the 16-pin SOIC footprint, including body width and 1.27 mm lead pitch, rather than relying on a visually similar outline.
Do not leave preset, reset, clock, or decode-related control inputs floating in a CMOS counter circuit. Define their startup states with suitable pull components or controller logic so power-up cannot create an unintended count. Also avoid assuming that every CD4018B ordering suffix has the same carrier format or production status. Confirm the exact MPN, package dimensions, temperature grade, and marking requirements before releasing a production order.
Thông tin tuân thủ
The manufacturer family is identified as a CD4000B CMOS logic device, but no specific environmental or material-compliance declaration is stated for the CD4018BMT ordering suffix.