THÔNG BÁO MUA LẦN CUỐI: CS4385-DQZ sắp tới cuối cuộc sống. Ngày đặt hàng cuối cùng: Liên hệ với chúng tôi. Xem các bộ phận thay thế có sẵn →
Cirrus Logic Inc.

CS4385-DQZ - 8-Ch 24-bit 192kHz Audio DAC | Cirrus Logic

MPN: CS4385-DQZ ✗ Cuối đời
2.37 V to 5.25 V Vdss up to 84 mA Id 48-LQFP (7x7 mm) Package
MOQ: 1 |

CS4385-DQZ Tóm tắt

The Cirrus Logic CS4385-DQZ is a complete 8-channel 24-bit audio digital-to-analog converter (DAC) supporting 192 kHz PCM sample rates and DSD (Direct Stream Digital) playback, housed in a 48-pin LQFP (7x7 mm) package with a 114 dB dynamic range.

An audio DAC is a mixed-signal device that converts a digital audio bitstream into an analog output signal. Within the signal-chain hierarchy, it sits downstream of digital audio interfaces (I2S, left-justified, and similar serial formats) and upstream of analog output stages such as op-amp I/V converters and line drivers. The CS4385 is part of Cirrus Logic's multi-channel Delta-Sigma DAC family, which also includes the 6-channel CS4365 and the enhanced CS4385A.

Key features include digital de-emphasis, half-dB step-size volume control, ATAPI channel mixing, and selectable fast and slow digital interpolation filters. The oversampled multi-bit Delta-Sigma modulator uses mismatch-shaping technology to eliminate distortion caused by capacitor mismatch, followed by a multi-element switched-capacitor reconstruction filter that removes high-frequency modulator noise without external components.

Technically, the CS4385 integrates eight DAC channels with independent volume control per channel, supporting sample rates up to 216 kHz for DSD and PCM playback. The device operates from nominal 5 V analog and digital supplies (2.37 V to 5.25 V range for digital interface compatibility) and consumes up to 84 mA, with power-down modes for multi-channel designs. The industrial temperature grade supports operation from -40 to +85 degrees C.

Typical applications include AV receivers, home theater processors, professional mixing consoles, multichannel recording interfaces, and automotive audio amplifiers, where eight matched DAC channels in a single 7x7 mm footprint reduce board area and channel-to-channel mismatch compared to stacking stereo DACs.

When designing with the CS4385, provide clean 5 V analog supplies with individual per-channel decoupling, and use the serial audio interface in left-justified, I2S, or right-justified mode as required by the upstream DSP or HDMI receiver.

This page adds value beyond the manufacturer datasheet by consolidating lifecycle status, drop-in same-family alternatives, comparison tables, and practical design notes in one place.

Bộ thay thế dễ dàng lắp đặt cho CS4385-DQZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

CS4385A-DQZ

✅ Drop-In
📦 48-LQFP (7x7 mm)
same-family enhanced successor, identical 48-LQFP footprint and 8-ch/24-bit functionality

📋 Tham chiếu thay thế (không có trong danh mục)

CS4385A-DQZR

✅ Drop-In
📦 48-LQFP (7x7 mm)
same die as CS4385A-DQZ, tape-and-reel ordering code, pin-to-pin compatible

📋 Tham chiếu thay thế (không có trong danh mục)

CS4385-CQZ

✅ Drop-In
📦 48-LQFP
same 8-ch 24-bit 192 kHz DAC, standard commercial grade variant of same family, 4.75 V to 5.25 V supply per FindIC listing

📋 Tham chiếu thay thế (không có trong danh mục)

CS4385-CQZR

✅ Drop-In
📦 48-LQFP
same die as CS4385-CQZ, tape-and-reel ordering code, pin-to-pin compatible

📋 Tham chiếu thay thế (không có trong danh mục)

CS4365-DQZ

✅ Drop-In ⚠️ Thông số chưa được xác minh
Cirrus Logic Inc.
📦 48-LQFP
6-channel audio DAC · 24 bit · 216 kHz · PCM and DSD · Differential · 6 channels · SPI and I2C · 4.75 V to 5.25 V

Liên hệ để biết giá

Xem tài liệu →

CS4385-DQZ Tỷ lệ tối đa & tính chất điện

Number of Channels 8
Độ phân giải 24 bit
Tỷ lệ lấy mẫu 192 kHz (PCM), 216 kHz max (DSD/PCM)
Dynamic Range 114 dB
Architecture Multi-bit Delta-Sigma with mismatch shaping
DSD Support Yes (Direct Stream Digital)
Digital Supply Voltage 2.37 V to 5.25 V
Điện áp cung cấp up to 84 mA
Volume Control Half-dB step size, digital
Channel Mixing ATAPI channel mixing
Digital Filters Selectable fast / slow interpolation filters
De-emphasis Digital de-emphasis
Nhiệt độ hoạt động -40C to +85C (industrial)
Hộp 48-LQFP (7x7 mm)
Kiểu lắp đặt Surface Mount
Trạng thái RoHS RoHS compliant
Trạng thái vòng đời Discontinued (per Cirrus Logic product page)

Hướng dẫn cấu hình chân CS4385-DQZ 48-lqfp (7x7 mm)

Cấu hình chân cho CS4385-DQZ (48-lqfp (7x7 mm) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 48-lqfp (7x7 mm) cho CS4385-DQZ

Không có dữ liệu chân cụ thể sẵn có cho CS4385-DQZ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

CS4385-DQZ phù hợp cho 6 Áp dụngs: AV Receivers and Home Theater Processors, Professional Mixing Consoles, Multichannel Recording Interfaces, Automotive Audio Amplifiers, DSD-Capable SACD Players, Industrial Multichannel Signal Output.

🎧

AV Receivers and Home Theater Processors

The CS4385-DQZ provides the eight output channels required for 7.1-channel surround decoding in AV receivers and home theater processors. Its 114 dB dynamic range preserves the full dialog-to-explosion contrast of Dolby and DTS program material, while the half-dB step volume control allows the system DSP to implement master volume and per-channel trims digitally, eliminating analog potentiometer tracking errors between channels. DSD support up to 216 kHz enables SACD-derived sources without external conversion. Placed downstream of an HDMI receiver or DSP serial port in I2S mode, the DAC outputs feed differential or single-ended line-driver stages. Because eight channels share one 7x7 mm die, channel-to-channel gain and phase mismatch stay far tighter than designs built from stacked stereo DACs, improving surround imaging accuracy.

🎚

Professional Mixing Consoles

In professional mixing consoles and broadcast production desks, the CS4385-DQZ converts eight monitor and aux buses simultaneously, with per-channel half-dB volume control enabling precise, repeatable level rides under DSP control. The 114 dB dynamic range preserves reverb tails and low-level detail during quiet passages, and the selectable slow interpolation filter minimizes passband ripple for reference monitoring. The fast filter option trades ripple for low latency, useful when the console output path feeds in-ear monitoring. ATAPI channel mixing in the digital domain implements fold-down mixes without external summing stages. Operation from -40 to +85 degrees C covers unconditioned install environments, and the single 48-pin LQFP replaces four stereo DACs, reducing board area and component count in the console output card.

🖥️

Multichannel Recording Interfaces

USB and Thunderbolt audio interfaces use the CS4385-DQZ to deliver eight line outputs for outboard effect loops, headphone mixes, and surround monitoring. The 192 kHz PCM capability supports high-resolution session formats, while DSD support distinguishes interfaces aimed at SACD mastering workflows. The mismatch-shaping Delta-Sigma modulator keeps intermodulation distortion low even at the high oversampling ratios used at 192 kHz, protecting converter linearity across all eight channels simultaneously. The 2.37 V to 5.25 V digital supply range lets the serial port interface directly to 3.3 V USB bridge ICs without level shifters, and power-down modes reduce quiescent draw when channels are unused. Per the Cirrus Logic datasheet application circuit, individual supply decoupling preserves crosstalk performance between adjacent output pairs.

🚗

Automotive Audio Amplifiers

Automotive external amplifiers and head-unit DSP boards use the CS4385-DQZ to convert the eight preprocessed channels that drive 7.1 in-cabin sound systems. The -40 to +85 degrees C industrial temperature grade matches automotive cabin electronics requirements, and the digital volume control lets the head unit implement speed-compensated loudness and fade/balance without analog pots that drift over temperature. Serial audio input in left-justified or I2S format connects directly to the vehicle audio DSP. The 114 dB dynamic range keeps the noise floor below audibility at typical in-cabin listening levels, and the half-dB volume steps give smooth equal-loudness compensation curves. The compact 7x7 mm LQFP fits the dense multilayer boards typical of amplifier modules.

📺

DSD-Capable SACD Players

Super Audio CD players and DSD-capable network streamers rely on the CS4385-DQZ because it accepts native DSD streams at up to 216 kHz, converting the 1-bit stream through the same mismatch-shaped Delta-Sigma modulator used for PCM. This avoids the dynamic-range loss and added jitter sensitivity of external DSD-to-PCM conversion. Eight channels cover both stereo and multichannel SACD releases in one device, with per-channel volume control enabling digital attenuation during playback rather than analog volume stages that add noise. The selectable slow filter suits the low-ripple preference of audiophile playback designs, while the fast filter serves players requiring lower latency for A/V sync. According to DigiKey's listing, the part is specified explicitly as '216k DSD, PCM', confirming this dual-format role.

🏭

Industrial Multichannel Signal Output

Industrial audio-analog subsystems such as PA announcement matrices, intercom matrices, and test-tone generation cards use the CS4385-DQZ to produce up to eight independently attenuated analog outputs from a single serial data source. The half-dB digital volume control lets a controller implement zone-level loudness trimming in firmware, and ATAPI mixing merges sources per output zone without external summing amplifiers. The industrial -40 to +85 degrees C rating and matte-tin lead finish support conformal-coated industrial boards, and the 48-pin gull-wing LQFP withstands vibration profiles typical of installed PA hardware. The mismatch-shaping modulator maintains output linearity for calibration-tone applications where THD of the test signal matters. RoHS compliance simplifies deployment in EU-market industrial equipment.

What is the CS4385-DQZ?
The CS4385-DQZ is an 8-channel, 24-bit audio DAC from Cirrus Logic that converts PCM up to 192 kHz and DSD streams into eight analog outputs. It integrates digital de-emphasis, half-dB volume control, ATAPI channel mixing, selectable fast/slow interpolation filters, and an oversampled multi-bit Delta-Sigma modulator with mismatch shaping in a 48-pin LQFP (7x7 mm) package. According to the Cirrus Logic datasheet, the device delivers a 114 dB dynamic range from a nominal 5 V supply.
What is the dynamic range of the CS4385-DQZ?
The CS4385-DQZ achieves a 114 dB dynamic range, as stated in the Cirrus Logic datasheet title: '114 dB, 192 kHz 8-Channel D/A Converter'. This figure reflects the multi-bit Delta-Sigma modulator with mismatch-shaping technology, which eliminates distortion due to capacitor mismatch. A 114 dB dynamic range exceeds the practical limits of 16-bit audio by more than 18 dB, making the device suitable for high-end AV receivers, professional mixing consoles, and studio monitoring paths.
What is the difference between CS4385-DQZ and CS4385A-DQZ?
The CS4385A-DQZ is the enhanced successor of the CS4385-DQZ: both are 8-channel 24-bit audio DACs in the same 48-pin LQFP (7x7 mm) package, and Cirrus Logic lists the CS4365/85/85A as one product family. The A-version carries improved performance and remains available through distributors, while the original CS4385 is discontinued. Because the package and pin functions match, most boards designed around the CS4385 can adopt the CS4385A after a datasheet-level review of supply and control-pin behavior.
Is the CS4385-DQZ still in production?
No. Cirrus Logic lists the CS4385 (together with the CS4365 and CS4385A) as discontinued on its official product page. The CS4385A-DQZ variant remains obtainable from distributor stock, and remaining CS4385-DQZ inventory is available only through distributor channels. For new designs, evaluate the CS4385A-DQZ or the 6-channel CS4365. For existing designs requiring the original part, request current stock and lead time through the Request a Quote form on this page.
What is the best drop-in replacement for CS4385-DQZ?
The best drop-in replacement is the CS4385A-DQZ, the same-family successor in the identical 48-pin LQFP (7x7 mm) package with the same 8-channel, 24-bit, 192 kHz/DSD functionality. The CS4385A-DQZR (tape-and-reel ordering code) is electrically identical. If six output channels suffice, the CS4365 shares the family architecture and footprint but provides 6 instead of 8 channels. Always verify control-pin polarity and register behavior against the CS4385A datasheet before committing the layout change.
Where can I download the CS4385-DQZ datasheet PDF?
The official Cirrus Logic datasheet is available as a PDF at statics.cirrus.com/pubs/proDatasheet/CS4385_F2.pdf, linked directly from the Cirrus Logic server. It covers the 8-channel architecture, serial audio interface formats, de-emphasis and ATAPI mixing features, filter characteristics, and application circuits. Mirror copies exist on datasheet aggregators, but the manufacturer-hosted file is authoritative. Use the pin-description table in that datasheet when assigning PCB tracks around the 48-pin LQFP footprint.
What supply voltage does the CS4385-DQZ require?
The CS4385-DQZ operates from a nominal 5 V supply system, with the digital interface supporting 2.37 V to 5.25 V for compatibility with lower-voltage logic. The device consumes up to 84 mA during normal operation. Analog and digital supplies should be decoupled individually, and the datasheet application circuit shows the recommended ferrite-isolated analog supply arrangement. Refer to the manufacturer datasheet for the exact per-pin supply limits before finalizing power-tree decisions in multi-rail systems.
Does the CS4385-DQZ support DSD playback?
Yes. DigiKey lists the CS4385-DQZ as 'DAC, Audio 24 b 216k DSD, PCM 48-LQFP', confirming Direct Stream Digital support at up to 216 kHz. DSD data is processed by the same Delta-Sigma modulator chain with mismatch shaping, allowing SACD-style playback through the eight output channels. This makes the device attractive for legacy Super Audio CD players and DSD-capable AV processors, where PCM-only DACs cannot reproduce the native 1-bit stream without external conversion.
What package does the CS4385-DQZ use and what is its footprint?
The CS4385-DQZ is housed in a 48-pin LQFP (Low-Profile Quad Flat Package) measuring 7x7 mm with gull-wing leads and a matte-tin finish, classified as LFQFP package code with square body shape. The lead pitch follows the standard 0.5 mm LQFP-48 convention, so any industry-standard LQFP-48 (7x7 mm) land pattern can be used. The surface-mount package suits automated assembly and supports the industrial -40 to +85 degrees C temperature range without derating.
What audio interface formats does the CS4385-DQZ accept?
The CS4385-DQZ accepts serial audio data in I2S, left-justified, and right-justified formats at sample rates up to 192 kHz for PCM, plus DSD streams up to 216 kHz. The serial port connects directly to DSPs, HDMI receivers, and digital audio transmitters without glue logic. Half-dB step volume control and ATAPI channel mixing are applied in the digital domain before conversion, so mixing functions that traditionally required an external DSP block can be executed inside the DAC itself, simplifying multichannel audio designs.
CS4385-DQZ vs CS4365-DQZ - which should I choose?
Choose the CS4385-DQZ (or its available successor CS4385A-DQZ) when eight output channels are required, such as 7.1 AV receivers or 8-channel mixing consoles. Choose the CS4365 when only six channels are needed and board cost matters more than channel count - both belong to the same Cirrus Logic family and share digital de-emphasis, half-dB volume control, ATAPI mixing, and Delta-Sigma mismatch-shaping architecture. Note that both original parts are discontinued; for production today, source the CS4385A-DQZ variant or evaluate Cirrus Logic's current-generation multichannel DACs.
Is the CS4385-DQZ suitable for professional audio equipment?
Yes. With a 114 dB dynamic range, eight matched channels, and 192 kHz/DSD capability, the CS4385-DQZ fits professional mixing consoles, multitrack recording interfaces, and studio monitor controllers. The per-channel half-dB volume control enables precise level matching across all eight outputs, which matters for surround panning accuracy. The mismatch-shaping Delta-Sigma modulator suppresses capacitor-mismatch distortion, and the selectable fast/slow interpolation filters let engineers choose between low-latency (fast) and low-ripple (slow) group-delay behavior for monitoring applications.
How many distributors stock the CS4385-DQZ?
Aggregated listings show around seven distributors offering the CS4385-DQZ or its close variants on market. Because Cirrus Logic has discontinued the family, stock is剩余 leftover inventory rather than production allocation, so availability fluctuates and buyers should confirm quantity and date-code requirements up front. CS4385A-DQZ availability is generally stronger. Submit the Request a Quote form on this page with your target quantity to receive current pricing, stock, and lead-time confirmation for either variant.
What are the key specifications of CS4385-DQZ that engineers should know?
Core specifications: 8 output channels; 24-bit resolution; PCM up to 192 kHz and DSD up to 216 kHz; 114 dB dynamic range; multi-bit Delta-Sigma modulator with mismatch shaping and multi-element switched-capacitor reconstruction filter; digital de-emphasis; half-dB step volume control; ATAPI channel mixing; selectable fast/slow interpolation filters; digital supply range 2.37 V to 5.25 V with nominal 5 V operation; up to 84 mA supply current; -40 to +85 degrees C industrial grade; 48-pin LQFP 7x7 mm package; RoHS compliant; discontinued lifecycle status.
What decoupling and layout practices does the CS4385-DQZ need?
The CS4385-DQZ requires clean analog supplies with 0.1 uF ceramic capacitors placed at each supply pin, plus bulk capacitance per rail, following the application circuit in the Cirrus Logic datasheet. Keep the analog output traces short and routed away from the digital audio lines to prevent crosstalk into the DAC outputs; use a solid ground plane under the 48-pin LQFP. Separate analog and digital returns at the DAC region, and power down unused channels via the control register to reduce supply noise in partially populated channel configurations.

Dữ liệu tham khảo kỹ thuật cho CS4385-DQZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the CS4385-DQZ when you must service an existing 7.1 AV receiver, SACD player, or console design that was qualified around this exact part and its discontinued status is acceptable as a last-time-buy. For new production, choose the CS4385A-DQZ instead - it is the same-family successor in the identical 48-LQFP (7x7 mm) footprint with continued distributor availability, requiring only a datasheet-level review before reuse of the existing PCB. Choose the CS4365 when six channels suffice and you accept reduced channel count for a shared architecture. The CS4385-CQZ/CQZR commercial grades suit cost-driven consumer builds on a fixed 5 V rail but lose the wide 2.37 V to 5.25 V digital supply flexibility of the DQZ industrial grade. Trade-off summary: DQZ maximizes supply flexibility and temperature range but is obsolete; CS4385A maximizes continuity; CQZ minimizes cost on pure-5V consumer boards.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này CS4385A-DQZ CS4385A-DQZR CS4385-CQZ CS4385-CQZR CS4365-DQZ
Package 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) - same 48-LQFP (7x7 mm) - same 48-LQFP - same 48-LQFP - same 48-LQFP - same
Brand Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic
Output Channels 8 8 8 8 8 6
Resolution 24 bit 24 bit 24 bit 24 bit 24 bit 24 bit
Sampling Rate 192 kHz PCM / 216 kHz DSD 192 kHz PCM / 216 kHz DSD 192 kHz PCM / 216 kHz DSD 192 kSPS 192 kSPS 192 kHz PCM
Lifecycle Status Discontinued Available via distributors Available via distributors Discontinued family Discontinued family Discontinued

Bảo phân biệt quan trọng

  • Eight matched DAC channels on one die (vsCS4365-DQZ)
  • Native DSD support to 216 kHz (vsCS4385-CQZ)
  • Wider digital supply compatibility (vsCS4385-CQZ)

Ghi chú thiết kế

Provide a clean nominal 5 V analog supply with 0.1 uF ceramic capacitors at each supply pin plus bulk bulk capacitance, following the application circuit in the Cirrus Logic CS4385 datasheet. The digital interface tolerates 2.37 V to 5.25 V, so the serial port can couple directly to 3.3 V logic, but keep analog and digital rails ferrite-isolated to prevent digital switching noise from modulating the DAC output. The device draws up to 84 mA, so size the rail regulator accordingly in eight-channel operation.

Route the eight analog output traces short and symmetrically, away from the serial audio clock and data lines, to prevent digital crosstalk from appearing as distortion in the DAC outputs. Use a solid, unbroken ground plane under the 48-pin LQFP (7x7 mm) footprint, and separate analog and digital return currents locally around the device. Place each 0.1 uF decoupling capacitor within 2 mm of its supply pin with a direct via to the ground plane rather than sharing thermal-relief traces with other ICs.

The CS4385 and CS4365/CS4385A family is discontinued per Cirrus Logic, so treat any design win as last-time-buy: qualify the CS4385A-DQZ as the continuity part and verify control-pin behavior and register maps against the CS4385A datasheet before tape-out. Do not assume the CS4365 (6 channels) is channel-for-channel identical at pin level - its extra pins differ in function even though the package is shared. Confirm DSD clocking requirements separately from PCM mode, since DSD operation has distinct clock-domain expectations.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Yes
Không halogen
Unknown
Khoáng vật xung đột
Unknown

LCSC product listing identifies the CS4385-DQZ as ROHS compliant; matte-tin lead finish per distributor package data indicates lead-free construction. No REACH or conflict-minerals statement found in the retrieved listings.

Dữ liệu được xác minh vào: 2026-11-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

CS4385-DQZ datasheet CS4385-DQZ datasheet pdf cs4385 cqz cs4385 cqzr cirrus cs4385 CS4385-DQZ equivalent CS4385-DQZ replacement CS4385-DQZ vs CS4385A-DQZ CS4385 pinout 48-LQFP CS4385-DQZ price CS4385-DQZ stock buy 8 channel 24 bit audio DAC DSD Cirrus Logic CS4385 application circuit

Các bộ phận và thuật ngữ liên quan

Cirrus Logic CS4385-DQZ CS4385A-DQZ CS4385A-DQZR CS4385-CQZ CS4385-CQZR CS4365-DQZ audio DAC digital-to-analog converter Delta-Sigma modulator mismatch shaping DSD Direct Stream Digital I2S ATAPI channel mixing 48-LQFP LQFP package family surface mount RoHS 192 kHz 114 dB dynamic range SACD player AV receiver volume control digital interpolation filter
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ