CS4385-DQZ - 8-Ch 24-bit 192kHz Audio DAC | Cirrus Logic
MPN: CS4385-DQZ ✗ סוף ייצורCS4385-DQZ סקירה
An audio DAC is a mixed-signal device that converts a digital audio bitstream into an analog output signal. Within the signal-chain hierarchy, it sits downstream of digital audio interfaces (I2S, left-justified, and similar serial formats) and upstream of analog output stages such as op-amp I/V converters and line drivers. The CS4385 is part of Cirrus Logic's multi-channel Delta-Sigma DAC family, which also includes the 6-channel CS4365 and the enhanced CS4385A.
Key features include digital de-emphasis, half-dB step-size volume control, ATAPI channel mixing, and selectable fast and slow digital interpolation filters. The oversampled multi-bit Delta-Sigma modulator uses mismatch-shaping technology to eliminate distortion caused by capacitor mismatch, followed by a multi-element switched-capacitor reconstruction filter that removes high-frequency modulator noise without external components.
Technically, the CS4385 integrates eight DAC channels with independent volume control per channel, supporting sample rates up to 216 kHz for DSD and PCM playback. The device operates from nominal 5 V analog and digital supplies (2.37 V to 5.25 V range for digital interface compatibility) and consumes up to 84 mA, with power-down modes for multi-channel designs. The industrial temperature grade supports operation from -40 to +85 degrees C.
Typical applications include AV receivers, home theater processors, professional mixing consoles, multichannel recording interfaces, and automotive audio amplifiers, where eight matched DAC channels in a single 7x7 mm footprint reduce board area and channel-to-channel mismatch compared to stacking stereo DACs.
When designing with the CS4385, provide clean 5 V analog supplies with individual per-channel decoupling, and use the serial audio interface in left-justified, I2S, or right-justified mode as required by the upstream DSP or HDMI receiver.
This page adds value beyond the manufacturer datasheet by consolidating lifecycle status, drop-in same-family alternatives, comparison tables, and practical design notes in one place.
חלופות תחליף ישיר עבור CS4385-DQZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
CS4385A-DQZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
CS4385A-DQZR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
CS4385-CQZ
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
CS4385-CQZR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
CS4365-DQZ
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←CS4385-DQZ דירוגים מרביים ומאפיינים חשמליים
| Number of Channels | 8 |
| רזולוציה | 24 bit |
| קצב דגימה | 192 kHz (PCM), 216 kHz max (DSD/PCM) |
| Dynamic Range | 114 dB |
| Architecture | Multi-bit Delta-Sigma with mismatch shaping |
| DSD Support | Yes (Direct Stream Digital) |
| Digital Supply Voltage | 2.37 V to 5.25 V |
| זרם אספקה | up to 84 mA |
| Volume Control | Half-dB step size, digital |
| Channel Mixing | ATAPI channel mixing |
| Digital Filters | Selectable fast / slow interpolation filters |
| De-emphasis | Digital de-emphasis |
| טמפרטורת פעולה | -40C to +85C (industrial) |
| מארז | 48-LQFP (7x7 mm) |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | RoHS compliant |
| סטטוס מחזור חיים | Discontinued (per Cirrus Logic product page) |
מדריך תצורת פינים של CS4385-DQZ 48-lqfp (7x7 mm)
תצורת פינים עבור CS4385-DQZ (מארזת 48-lqfp (7x7 mm)). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור CS4385-DQZ.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
CS4385-DQZ מתאים עבור 6 יישוםs: AV Receivers and Home Theater Processors, Professional Mixing Consoles, Multichannel Recording Interfaces, Automotive Audio Amplifiers, DSD-Capable SACD Players, Industrial Multichannel Signal Output.
AV Receivers and Home Theater Processors
The CS4385-DQZ provides the eight output channels required for 7.1-channel surround decoding in AV receivers and home theater processors. Its 114 dB dynamic range preserves the full dialog-to-explosion contrast of Dolby and DTS program material, while the half-dB step volume control allows the system DSP to implement master volume and per-channel trims digitally, eliminating analog potentiometer tracking errors between channels. DSD support up to 216 kHz enables SACD-derived sources without external conversion. Placed downstream of an HDMI receiver or DSP serial port in I2S mode, the DAC outputs feed differential or single-ended line-driver stages. Because eight channels share one 7x7 mm die, channel-to-channel gain and phase mismatch stay far tighter than designs built from stacked stereo DACs, improving surround imaging accuracy.
מומלץ
Professional Mixing Consoles
In professional mixing consoles and broadcast production desks, the CS4385-DQZ converts eight monitor and aux buses simultaneously, with per-channel half-dB volume control enabling precise, repeatable level rides under DSP control. The 114 dB dynamic range preserves reverb tails and low-level detail during quiet passages, and the selectable slow interpolation filter minimizes passband ripple for reference monitoring. The fast filter option trades ripple for low latency, useful when the console output path feeds in-ear monitoring. ATAPI channel mixing in the digital domain implements fold-down mixes without external summing stages. Operation from -40 to +85 degrees C covers unconditioned install environments, and the single 48-pin LQFP replaces four stereo DACs, reducing board area and component count in the console output card.
מומלץ
Multichannel Recording Interfaces
USB and Thunderbolt audio interfaces use the CS4385-DQZ to deliver eight line outputs for outboard effect loops, headphone mixes, and surround monitoring. The 192 kHz PCM capability supports high-resolution session formats, while DSD support distinguishes interfaces aimed at SACD mastering workflows. The mismatch-shaping Delta-Sigma modulator keeps intermodulation distortion low even at the high oversampling ratios used at 192 kHz, protecting converter linearity across all eight channels simultaneously. The 2.37 V to 5.25 V digital supply range lets the serial port interface directly to 3.3 V USB bridge ICs without level shifters, and power-down modes reduce quiescent draw when channels are unused. Per the Cirrus Logic datasheet application circuit, individual supply decoupling preserves crosstalk performance between adjacent output pairs.
מומלץ
Automotive Audio Amplifiers
Automotive external amplifiers and head-unit DSP boards use the CS4385-DQZ to convert the eight preprocessed channels that drive 7.1 in-cabin sound systems. The -40 to +85 degrees C industrial temperature grade matches automotive cabin electronics requirements, and the digital volume control lets the head unit implement speed-compensated loudness and fade/balance without analog pots that drift over temperature. Serial audio input in left-justified or I2S format connects directly to the vehicle audio DSP. The 114 dB dynamic range keeps the noise floor below audibility at typical in-cabin listening levels, and the half-dB volume steps give smooth equal-loudness compensation curves. The compact 7x7 mm LQFP fits the dense multilayer boards typical of amplifier modules.
מומלץ
DSD-Capable SACD Players
Super Audio CD players and DSD-capable network streamers rely on the CS4385-DQZ because it accepts native DSD streams at up to 216 kHz, converting the 1-bit stream through the same mismatch-shaped Delta-Sigma modulator used for PCM. This avoids the dynamic-range loss and added jitter sensitivity of external DSD-to-PCM conversion. Eight channels cover both stereo and multichannel SACD releases in one device, with per-channel volume control enabling digital attenuation during playback rather than analog volume stages that add noise. The selectable slow filter suits the low-ripple preference of audiophile playback designs, while the fast filter serves players requiring lower latency for A/V sync. According to DigiKey's listing, the part is specified explicitly as '216k DSD, PCM', confirming this dual-format role.
מומלץ
Industrial Multichannel Signal Output
Industrial audio-analog subsystems such as PA announcement matrices, intercom matrices, and test-tone generation cards use the CS4385-DQZ to produce up to eight independently attenuated analog outputs from a single serial data source. The half-dB digital volume control lets a controller implement zone-level loudness trimming in firmware, and ATAPI mixing merges sources per output zone without external summing amplifiers. The industrial -40 to +85 degrees C rating and matte-tin lead finish support conformal-coated industrial boards, and the 48-pin gull-wing LQFP withstands vibration profiles typical of installed PA hardware. The mismatch-shaping modulator maintains output linearity for calibration-tone applications where THD of the test signal matters. RoHS compliance simplifies deployment in EU-market industrial equipment.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור CS4385-DQZ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | CS4385A-DQZ | CS4385A-DQZR | CS4385-CQZ | CS4385-CQZR | CS4365-DQZ |
|---|---|---|---|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP - same | 48-LQFP - same | 48-LQFP - same |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Output Channels | 8 | 8 | 8 | 8 | 8 | 6 |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Sampling Rate | 192 kHz PCM / 216 kHz DSD | 192 kHz PCM / 216 kHz DSD | 192 kHz PCM / 216 kHz DSD | 192 kSPS | 192 kSPS | 192 kHz PCM |
| Lifecycle Status | Discontinued | Available via distributors | Available via distributors | Discontinued family | Discontinued family | Discontinued |
מבדילים עיקריים
- Eight matched DAC channels on one die (לעומתCS4365-DQZ)
- Native DSD support to 216 kHz (לעומתCS4385-CQZ)
- Wider digital supply compatibility (לעומתCS4385-CQZ)
הערות תכנון
Provide a clean nominal 5 V analog supply with 0.1 uF ceramic capacitors at each supply pin plus bulk bulk capacitance, following the application circuit in the Cirrus Logic CS4385 datasheet. The digital interface tolerates 2.37 V to 5.25 V, so the serial port can couple directly to 3.3 V logic, but keep analog and digital rails ferrite-isolated to prevent digital switching noise from modulating the DAC output. The device draws up to 84 mA, so size the rail regulator accordingly in eight-channel operation.
Route the eight analog output traces short and symmetrically, away from the serial audio clock and data lines, to prevent digital crosstalk from appearing as distortion in the DAC outputs. Use a solid, unbroken ground plane under the 48-pin LQFP (7x7 mm) footprint, and separate analog and digital return currents locally around the device. Place each 0.1 uF decoupling capacitor within 2 mm of its supply pin with a direct via to the ground plane rather than sharing thermal-relief traces with other ICs.
The CS4385 and CS4365/CS4385A family is discontinued per Cirrus Logic, so treat any design win as last-time-buy: qualify the CS4385A-DQZ as the continuity part and verify control-pin behavior and register maps against the CS4385A datasheet before tape-out. Do not assume the CS4365 (6 channels) is channel-for-channel identical at pin level - its extra pins differ in function even though the package is shared. Confirm DSD clocking requirements separately from PCM mode, since DSD operation has distinct clock-domain expectations.
מידע על תאימות
LCSC product listing identifies the CS4385-DQZ as ROHS compliant; matte-tin lead finish per distributor package data indicates lead-free construction. No REACH or conflict-minerals statement found in the retrieved listings.