CS4385-DQZ - 8-Ch 24-bit 192kHz Audio DAC | Cirrus Logic
MPN: CS4385-DQZ ✗ 停產CS4385-DQZ 概覽
An audio DAC is a mixed-signal device that converts a digital audio bitstream into an analog output signal. Within the signal-chain hierarchy, it sits downstream of digital audio interfaces (I2S, left-justified, and similar serial formats) and upstream of analog output stages such as op-amp I/V converters and line drivers. The CS4385 is part of Cirrus Logic's multi-channel Delta-Sigma DAC family, which also includes the 6-channel CS4365 and the enhanced CS4385A.
Key features include digital de-emphasis, half-dB step-size volume control, ATAPI channel mixing, and selectable fast and slow digital interpolation filters. The oversampled multi-bit Delta-Sigma modulator uses mismatch-shaping technology to eliminate distortion caused by capacitor mismatch, followed by a multi-element switched-capacitor reconstruction filter that removes high-frequency modulator noise without external components.
Technically, the CS4385 integrates eight DAC channels with independent volume control per channel, supporting sample rates up to 216 kHz for DSD and PCM playback. The device operates from nominal 5 V analog and digital supplies (2.37 V to 5.25 V range for digital interface compatibility) and consumes up to 84 mA, with power-down modes for multi-channel designs. The industrial temperature grade supports operation from -40 to +85 degrees C.
Typical applications include AV receivers, home theater processors, professional mixing consoles, multichannel recording interfaces, and automotive audio amplifiers, where eight matched DAC channels in a single 7x7 mm footprint reduce board area and channel-to-channel mismatch compared to stacking stereo DACs.
When designing with the CS4385, provide clean 5 V analog supplies with individual per-channel decoupling, and use the serial audio interface in left-justified, I2S, or right-justified mode as required by the upstream DSP or HDMI receiver.
This page adds value beyond the manufacturer datasheet by consolidating lifecycle status, drop-in same-family alternatives, comparison tables, and practical design notes in one place.
直接替換替代品,適用於 CS4385-DQZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
CS4385A-DQZ
✅ 直接替換📋 參考替代品(不在目錄中)
CS4385A-DQZR
✅ 直接替換📋 參考替代品(不在目錄中)
CS4385-CQZ
✅ 直接替換📋 參考替代品(不在目錄中)
CS4385-CQZR
✅ 直接替換📋 參考替代品(不在目錄中)
CS4365-DQZ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →CS4385-DQZ 最大額定值與電氣特性
| Number of Channels | 8 |
| 解析度 | 24 bit |
| 取樣率 | 192 kHz (PCM), 216 kHz max (DSD/PCM) |
| Dynamic Range | 114 dB |
| Architecture | Multi-bit Delta-Sigma with mismatch shaping |
| DSD Support | Yes (Direct Stream Digital) |
| Digital Supply Voltage | 2.37 V to 5.25 V |
| 供應電流 | up to 84 mA |
| Volume Control | Half-dB step size, digital |
| Channel Mixing | ATAPI channel mixing |
| Digital Filters | Selectable fast / slow interpolation filters |
| De-emphasis | Digital de-emphasis |
| 工作溫度 | -40C to +85C (industrial) |
| 封裝 | 48-LQFP (7x7 mm) |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | RoHS compliant |
| 生命週期狀態 | Discontinued (per Cirrus Logic product page) |
CS4385-DQZ 48-lqfp (7x7 mm) 腳位配置指南
CS4385-DQZ(48-lqfp (7x7 mm) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: CS4385-DQZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS4385-DQZ 適用於 6 應用s: AV Receivers and Home Theater Processors, Professional Mixing Consoles, Multichannel Recording Interfaces, Automotive Audio Amplifiers, DSD-Capable SACD Players, Industrial Multichannel Signal Output.
AV Receivers and Home Theater Processors
The CS4385-DQZ provides the eight output channels required for 7.1-channel surround decoding in AV receivers and home theater processors. Its 114 dB dynamic range preserves the full dialog-to-explosion contrast of Dolby and DTS program material, while the half-dB step volume control allows the system DSP to implement master volume and per-channel trims digitally, eliminating analog potentiometer tracking errors between channels. DSD support up to 216 kHz enables SACD-derived sources without external conversion. Placed downstream of an HDMI receiver or DSP serial port in I2S mode, the DAC outputs feed differential or single-ended line-driver stages. Because eight channels share one 7x7 mm die, channel-to-channel gain and phase mismatch stay far tighter than designs built from stacked stereo DACs, improving surround imaging accuracy.
推薦
Professional Mixing Consoles
In professional mixing consoles and broadcast production desks, the CS4385-DQZ converts eight monitor and aux buses simultaneously, with per-channel half-dB volume control enabling precise, repeatable level rides under DSP control. The 114 dB dynamic range preserves reverb tails and low-level detail during quiet passages, and the selectable slow interpolation filter minimizes passband ripple for reference monitoring. The fast filter option trades ripple for low latency, useful when the console output path feeds in-ear monitoring. ATAPI channel mixing in the digital domain implements fold-down mixes without external summing stages. Operation from -40 to +85 degrees C covers unconditioned install environments, and the single 48-pin LQFP replaces four stereo DACs, reducing board area and component count in the console output card.
推薦
Multichannel Recording Interfaces
USB and Thunderbolt audio interfaces use the CS4385-DQZ to deliver eight line outputs for outboard effect loops, headphone mixes, and surround monitoring. The 192 kHz PCM capability supports high-resolution session formats, while DSD support distinguishes interfaces aimed at SACD mastering workflows. The mismatch-shaping Delta-Sigma modulator keeps intermodulation distortion low even at the high oversampling ratios used at 192 kHz, protecting converter linearity across all eight channels simultaneously. The 2.37 V to 5.25 V digital supply range lets the serial port interface directly to 3.3 V USB bridge ICs without level shifters, and power-down modes reduce quiescent draw when channels are unused. Per the Cirrus Logic datasheet application circuit, individual supply decoupling preserves crosstalk performance between adjacent output pairs.
推薦
Automotive Audio Amplifiers
Automotive external amplifiers and head-unit DSP boards use the CS4385-DQZ to convert the eight preprocessed channels that drive 7.1 in-cabin sound systems. The -40 to +85 degrees C industrial temperature grade matches automotive cabin electronics requirements, and the digital volume control lets the head unit implement speed-compensated loudness and fade/balance without analog pots that drift over temperature. Serial audio input in left-justified or I2S format connects directly to the vehicle audio DSP. The 114 dB dynamic range keeps the noise floor below audibility at typical in-cabin listening levels, and the half-dB volume steps give smooth equal-loudness compensation curves. The compact 7x7 mm LQFP fits the dense multilayer boards typical of amplifier modules.
推薦
DSD-Capable SACD Players
Super Audio CD players and DSD-capable network streamers rely on the CS4385-DQZ because it accepts native DSD streams at up to 216 kHz, converting the 1-bit stream through the same mismatch-shaped Delta-Sigma modulator used for PCM. This avoids the dynamic-range loss and added jitter sensitivity of external DSD-to-PCM conversion. Eight channels cover both stereo and multichannel SACD releases in one device, with per-channel volume control enabling digital attenuation during playback rather than analog volume stages that add noise. The selectable slow filter suits the low-ripple preference of audiophile playback designs, while the fast filter serves players requiring lower latency for A/V sync. According to DigiKey's listing, the part is specified explicitly as '216k DSD, PCM', confirming this dual-format role.
推薦
Industrial Multichannel Signal Output
Industrial audio-analog subsystems such as PA announcement matrices, intercom matrices, and test-tone generation cards use the CS4385-DQZ to produce up to eight independently attenuated analog outputs from a single serial data source. The half-dB digital volume control lets a controller implement zone-level loudness trimming in firmware, and ATAPI mixing merges sources per output zone without external summing amplifiers. The industrial -40 to +85 degrees C rating and matte-tin lead finish support conformal-coated industrial boards, and the 48-pin gull-wing LQFP withstands vibration profiles typical of installed PA hardware. The mismatch-shaping modulator maintains output linearity for calibration-tone applications where THD of the test signal matters. RoHS compliance simplifies deployment in EU-market industrial equipment.
推薦
推薦產品摘要
工程參考資料,適用於 CS4385-DQZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CS4385A-DQZ | CS4385A-DQZR | CS4385-CQZ | CS4385-CQZR | CS4365-DQZ |
|---|---|---|---|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP - same | 48-LQFP - same | 48-LQFP - same |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Output Channels | 8 | 8 | 8 | 8 | 8 | 6 |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Sampling Rate | 192 kHz PCM / 216 kHz DSD | 192 kHz PCM / 216 kHz DSD | 192 kHz PCM / 216 kHz DSD | 192 kSPS | 192 kSPS | 192 kHz PCM |
| Lifecycle Status | Discontinued | Available via distributors | Available via distributors | Discontinued family | Discontinued family | Discontinued |
主要差異化特點
- Eight matched DAC channels on one die (對比CS4365-DQZ)
- Native DSD support to 216 kHz (對比CS4385-CQZ)
- Wider digital supply compatibility (對比CS4385-CQZ)
設計說明
Provide a clean nominal 5 V analog supply with 0.1 uF ceramic capacitors at each supply pin plus bulk bulk capacitance, following the application circuit in the Cirrus Logic CS4385 datasheet. The digital interface tolerates 2.37 V to 5.25 V, so the serial port can couple directly to 3.3 V logic, but keep analog and digital rails ferrite-isolated to prevent digital switching noise from modulating the DAC output. The device draws up to 84 mA, so size the rail regulator accordingly in eight-channel operation.
Route the eight analog output traces short and symmetrically, away from the serial audio clock and data lines, to prevent digital crosstalk from appearing as distortion in the DAC outputs. Use a solid, unbroken ground plane under the 48-pin LQFP (7x7 mm) footprint, and separate analog and digital return currents locally around the device. Place each 0.1 uF decoupling capacitor within 2 mm of its supply pin with a direct via to the ground plane rather than sharing thermal-relief traces with other ICs.
The CS4385 and CS4365/CS4385A family is discontinued per Cirrus Logic, so treat any design win as last-time-buy: qualify the CS4385A-DQZ as the continuity part and verify control-pin behavior and register maps against the CS4385A datasheet before tape-out. Do not assume the CS4365 (6 channels) is channel-for-channel identical at pin level - its extra pins differ in function even though the package is shared. Confirm DSD clocking requirements separately from PCM mode, since DSD operation has distinct clock-domain expectations.
合規資訊
LCSC product listing identifies the CS4385-DQZ as ROHS compliant; matte-tin lead finish per distributor package data indicates lead-free construction. No REACH or conflict-minerals statement found in the retrieved listings.