CY7C65640A-LFXC - USB 2.0 Four-Port Hub Controller | Infineon
MPN: CY7C65640A-LFXC ✗ Cuối đờiCY7C65640A-LFXC Tóm tắt
A USB hub controller is a dedicated interface semiconductor that manages one upstream USB connection and multiple downstream ports. It belongs to the USB interface controller hierarchy: USB 2.0 controller → USB hub controller → interface IC → semiconductor. In a four-port hub, the controller coordinates traffic between a host and attached peripherals while providing device-side connection management, enumeration support, and integrated signal-conditioning resources described in the manufacturer documentation.
The CY7C65640A-LFXC is positioned for USB 2.0 hub implementations where four downstream ports are required in a compact surface-mount design. The 56-QFN package supports dense PCB layouts, while the integrated USB termination resources can reduce the number of external resistors when the recommended reference design is followed. The verified Cypress comparison data describes the A-LFXC revision as functionally and pin equivalent to the earlier CY7C65640-LFXC, providing a documented same-family migration path.
The controller is suitable for standalone hubs, motherboard hubs, docking stations, and other USB expansion systems. For high-speed signal integrity, the PCB layout must preserve controlled-impedance differential pairs, provide adequate return paths, and keep connector and routing geometry consistent with the manufacturer reference design. External power-distribution design is especially important because a four-port hub may need to supply more current than a single integrated USB port.
The verified comparison data also identifies CY7C65640A-LTXC as a related family member. That part should not be treated as a drop-in replacement without checking its exact package suffix and ordering configuration. The A-LFXC suffix is especially important because package, temperature, lead style, and lifecycle details are encoded in the ordering code.
This page synthesizes the verified distributor listings, manufacturer-linked datasheet information, and cross-reference results into a procurement-oriented overview. Electrical values that were not present in the supplied verified data are intentionally marked as required rather than guessed. The manufacturer datasheet remains the controlling reference for pin functions, timing, electrical limits, reference circuitry, and USB compliance testing.
Bộ thay thế dễ dàng lắp đặt cho CY7C65640A-LFXC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CY7C65640A-LFXC (cùng hình factor và footprint) — khác nhau ở Device Type.
CY7C65640-LFXC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CY7C65640A-LTXC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CY7C65640B-56LFXC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CY7C65640A-LFXC Thông số kỹ thuật
| Device Type | USB 2.0 four-port high-speed USB hub controller |
| USB Version | USB 2.0 |
| Downstream Port Count | 4 ports |
| Package Type | 56-QFN |
| Package Dimensions | 8 mm × 8 mm |
| Kiểu lắp đặt | Surface mount |
| Interface Classification | USB interface IC |
| Controller Function | Hub controller |
| Upstream Termination | Integrated 1.5 kΩ pull-up resistors for full-speed operation |
| Downstream Termination | Integrated 15 kΩ pull-down resistors |
| Differential Pair Termination | Integrated series termination resistors on USB D+ and D− pins |
| Supported Application | Standalone hubs, motherboard hubs, and docking stations |
| Firmware Requirement | No firmware development required according to verified comparison data |
| Same-Family Equivalence | Functional and pin equivalent die revision of CY7C65640-LFXC |
Hướng dẫn cấu hình chân CY7C65640A-LFXC 8 mm × 8 mm
Cấu hình chân cho CY7C65640A-LFXC (8 mm × 8 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho CY7C65640A-LFXC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CY7C65640A-LFXC phù hợp cho 6 Áp dụngs: Standalone USB 2.0 Hub, Motherboard USB Hub, USB Docking Station, USB Peripheral Expansion, Industrial USB Connection Panel, USB Test and Measurement Fixture.
Standalone USB 2.0 Hub
The CY7C65640A-LFXC fits a standalone four-port USB hub because the verified data identifies a USB 2.0 hub controller with four downstream ports and integrated USB termination resources. Place the controller between the upstream host connection and four downstream USB ports, then follow the manufacturer reference circuit for power, routing, and pull-up or pull-down arrangements. Its controller-based approach can reduce firmware-development effort, although the final system still needs normal USB enumeration and power-management validation. The 56-QFN package keeps the controller compact, but the exposed-pad and ground-layout requirements must be followed precisely.
Được đề xuất
Motherboard USB Hub
The CY7C65640A-LFXC can support a motherboard hub implementation where one upstream USB connection must expand into four downstream ports. The verified GlobalSpec result identifies motherboard hubs as a suitable application, while the four-port architecture reduces the need for multiple hub controllers. The USB differential pairs should be routed as controlled-impedance signals with short return paths, and connector placement should follow the reference design to limit crosstalk and skew. Power budgeting is critical because the logic rails and downstream port loads may exceed what a single board power source can provide without careful switching and distribution.
Được đề xuất
USB Docking Station
The CY7C65640A-LFXC is suitable for a docking station that adds four USB downstream connections without relying on a full host computer implementation. The verified application data names docking stations as a target use case, and the integrated upstream and downstream termination resources can simplify the hub interface when the reference circuit is followed. A practical design must account for cable length, connector insertion, ESD protection, and downstream power switching. Since the supplied verified data does not include operating voltage or current limits, those values must be established from the manufacturer datasheet before selecting regulators, switches, and power connectors.
Được đề xuất
USB Peripheral Expansion
The CY7C65640A-LFXC can act as the hub-management element in a peripheral expansion box that connects storage, input, and communications devices to a host USB port. The verified four-downstream-port description provides a clear fit for consolidating multiple peripherals, while the USB 2.0 designation defines the host-facing generation to support. Engineers should verify whether downstream ports require individual power-enable control and whether all supported peripherals satisfy the hub's current and signaling requirements. The compact QFN package helps reduce board area, but thermal-pad soldering and high-speed routing remain manufacturing-critical.
Được đề xuất
Industrial USB Connection Panel
The CY7C65640A-LFXC can support an industrial USB connection panel when a panel-mounted host port must feed four external peripherals. The verified manufacturer-linked application categories include standalone hubs and docking stations, which are structurally similar to connection panels. Industrial use adds requirements for ESD protection, robust power distribution, connector retention, and possibly extended-temperature qualification. The supplied data does not state the controller's operating-temperature range or compliance status, so those requirements must be checked before installation in a harsh environment. Use the manufacturer's reference layout to preserve USB signal integrity across connector transitions.
Được đề xuất
USB Test and Measurement Fixture
The CY7C65640A-LFXC can provide a repeatable four-port USB fanout for test fixtures that connect several USB peripherals to one host controller. This can simplify automated testing of keyboards, storage devices, interface adapters, or embedded peripherals by reducing repeated host-port changes. The verified data confirms USB 2.0 four-port hub functionality and integrated termination, but does not provide timing margins or electrical limits. Therefore, validate signal integrity with the actual connectors, cable lengths, loads, and test equipment. Keep test-fixture USB traces short where possible and provide clean grounding between the hub controller, downstream power switches, and external fixtures.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CY7C65640A-LFXC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CY7C65640-LFXC | CY7C65640A-LTXC | CY7C65640B-56LFXC |
|---|---|---|---|---|
| Package | 56-QFN (8x8) | 56-QFN (8x8) - same package | 56-QFN (8x8) - verify suffix | 56-QFN (8x8) - verify ordering code |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
Bảo phân biệt quan trọng
- Documented same-family functional and pin equivalence (vsCY7C65640-LFXC)
- Four-port USB 2.0 hub integration (vsCY7C65640A-LTXC)
- Reduced external termination design effort (vsCY7C65640B-56LFXC)
Ghi chú thiết kế
Use the manufacturer reference layout as the authority for the 56-QFN footprint, exposed pad, USB differential routing, and grounding. Keep D+ and D− pairs impedance controlled, matched in length, and surrounded by an uninterrupted ground reference. Avoid routing the high-speed pairs through power-plane splits, test pads, or unrelated switching nodes because those discontinuities can degrade USB 2.0 signal integrity.
Design the downstream power system separately from the controller logic supply. A four-port hub may require multiple port-power switches, current limiting, and sequencing, even though the verified data does not state the maximum port current. Before selecting regulators or switches, obtain the electrical limits and reference power tree from the manufacturer datasheet, then validate startup current and inrush behavior with realistic USB loads.
Do not substitute a related suffix solely because the product family name is similar. CY7C65640A-LTXC and CY7C65640B-56LFXC appear in the supplied comparison data, but the exact package, lifecycle, electrical limits, and pin compatibility were not established. Check the complete ordering table and obtain a manufacturer or distributor cross-reference before releasing a replacement to production.
The verified data identifies integrated USB pull-up, pull-down, and series termination resources. Follow the reference schematic when deciding whether those resources are enabled or externally supplemented; do not add or remove USB termination components based only on general hub-design experience. Place ESD protection at the connector entry, maintain short return paths, and keep connector-to-controller geometry consistent across all four downstream channels.
Thông tin tuân thủ
Compliance fields are unknown because the supplied verified distributor snippets do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-mineral status. ETEI comparison pages were supplied, but their underlying certification values were not included in the verified data.