CY7C65640B-56LFXC - 3.3V USB 2.0 Hub | Infineon
MPN: CY7C65640B-56LFXC ✗ Cuối đờiCY7C65640B-56LFXC Tóm tắt
A USB hub controller is an interface IC that organizes communication between a USB host and one or more downstream devices. It belongs to the broader hierarchy of USB interface controller, interface IC, data-conversion and connectivity semiconductor. The controller coordinates port attachment, transaction routing, signaling, and device enumeration while allowing a host to operate several USB peripherals through one physical upstream connection.
The CY7C65640B-56LFXC operates from a 3.3 V supply and supports a commercial temperature range from 0°C to 70°C. Integrated upstream and downstream termination resistors reduce the number of external passive components associated with USB signal paths. Integrated port-status-indicator control allows hub status to be monitored without requiring a separate indicator-control device for every port.
The controller accepts a 24 MHz external crystal reference and uses an integrated PLL to support stable hub timing. In-system EEPROM programming provides a mechanism for configuring device behavior during production or system bring-up. Together, the integrated PLL, terminations, status-indicator control, and programming support simplify the implementation of a compact USB hub circuit.
Typical uses include USB peripheral hubs, multifunction desktop equipment, industrial data-acquisition systems, computer interfaces, and embedded test systems. The controller is appropriate when a design requires a central USB 2.0 interface controller rather than a host controller dedicated to a single peripheral. It can also support downstream-port expansion in larger equipment where several USB connections must be presented through one upstream port.
The 56-QFN package requires careful PCB layout, particularly around the exposed thermal pad, supply connections, crystal circuit, and high-speed USB nets. Place decoupling and termination-related components according to the manufacturer’s reference layout, preserve short return paths, and keep analog or sensitive circuitry away from clock and data activity. Verify USB signal integrity and power sequencing in the final board implementation.
This page combines device specifications, lifecycle and cross-reference information, package-level selection guidance, and practical integration considerations. It also distinguishes verified same-family replacements from choices that require additional electrical, firmware, or PCB validation.
Bộ thay thế dễ dàng lắp đặt cho CY7C65640B-56LFXC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CY7C65640B-56LFXC (cùng hình factor và footprint) — khác nhau ở Device Type, Operating Temperature, Package Type, Supply Voltage.
CY7C65640A-LFXC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CY7C65640A-LTXC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CY7C65640B-56LFXC Thông số kỹ thuật
| Device Type | Line / Bus Controller |
| USB Version | USB 2.0 |
| Điện áp cung cấp | 3.3 V |
| Nhiệt độ hoạt động | 0°C to 70°C (32°F to 158°F) |
| Package Type | 56-QFN (8 x 8 mm), 0.90 mm height, MO-220 |
| Số chân | 56 pins |
| Upstream Termination Resistors | Integrated |
| Downstream Termination Resistors | Integrated |
| Port Status Indicator Control | Integrated |
| External Clock | 24 MHz crystal |
| Phase-Locked Loop | Integrated PLL |
| EEPROM Programming | In-system EEPROM programming |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân CY7C65640B-56LFXC 56-qfn (8 x 8 mm), 0.90 mm height, mo-220
Cấu hình chân cho CY7C65640B-56LFXC (56-qfn (8 x 8 mm), 0.90 mm height, mo-220 gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho CY7C65640B-56LFXC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CY7C65640B-56LFXC phù hợp cho 6 Áp dụngs: Multiport USB 2.0 Hubs, Industrial Data-Acquisition Equipment, Computer Peripherals, Embedded USB Expansion, Test and Measurement Systems, USB Interface Development Boards.
Multiport USB 2.0 Hubs
The CY7C65640B-56LFXC is well suited to a multiport USB 2.0 hub because it combines upstream and downstream termination resistors with dedicated port-status-indicator control. Its 3.3 V supply operation and 56-QFN package allow the controller and supporting passive components to be placed on a compact interconnect board. The 24 MHz external crystal and integrated PLL provide a defined timing reference for the hub interface. During implementation, route upstream and downstream channels as short, impedance-controlled connections and follow the manufacturer’s reference layout. Validate enumeration, hot-plug behavior, over-current handling, and conducted or radiated emissions with the complete enclosure and cable set because the final system can affect USB signal integrity.
Được đề xuất
Industrial Data-Acquisition Equipment
The CY7C65640B-56LFXC can serve as the USB connectivity controller in industrial data-acquisition equipment that must expose several peripherals through one host connection. Integrated USB terminations reduce the component count around high-speed routing, while port-status-indicator control supports visible connection-state monitoring without a separate controller for each port. The stated 0°C to 70°C range makes it suitable for controlled indoor environments, provided enclosure temperature does not exceed that limit. Place the 3.3 V decoupling network close to the device, isolate the crystal from switching regulators and motor-control traces, and test USB behavior across cable lengths and connector transitions to ensure robust enumeration in the finished instrument.
Được đề xuất
Computer Peripherals
The CY7C65640B-56LFXC is appropriate for computer peripherals that add downstream USB connectivity to a host-facing device. Its integrated terminations and status-control functions help simplify the high-speed interface layout, while the 56-QFN package supports compact board construction. The controller is intended for hub-style connectivity rather than acting as a general-purpose host controller, so system firmware must implement the required USB hub behavior. During development, verify enumeration under operating-system hot-plug events, confirm downstream-port current limits, and examine emissions with representative peripherals because externally attached cables can introduce noise not captured by board-only testing.
Được đề xuất
Embedded USB Expansion
The CY7C65640B-56LFXC can expand USB connectivity in embedded control systems that already provide a USB host interface upstream but need multiple device connections downstream. Its 3.3 V operation aligns with common embedded logic rails, and the integrated PLL works with the specified 24 MHz external crystal reference. In-system EEPROM programming adds a useful route for production configuration of hub characteristics or board-specific data. Design the implementation around short high-speed traces, a continuous ground reference, and careful exposed-pad thermal management. Firmware validation should cover attach, detach, suspend, resume, and repeated enumeration because reliable mechanical operation is as important as successful initial device recognition.
Được đề xuất
Test and Measurement Systems
The CY7C65640B-56LFXC can organize USB peripheral connections in test and measurement systems where several instruments or control devices must interface with a single upstream host. Integrated upstream and downstream terminations support compact channel layouts, and port-status-indicator control can assist operators in identifying active connections. The manufacturer-rated 0°C to 70°C interval covers many controlled laboratory environments. Place the crystal away from analog measurement circuitry, use separate return paths for switching supplies, and preserve the recommended QFN land pattern and exposed-pad connection. Validate compatibility with the selected operating system, device drivers, cables, and hub power budget rather than relying only on nominal USB signaling tests.
Được đề xuất
USB Interface Development Boards
The CY7C65640B-56LFXC is useful in USB interface development boards intended to evaluate hub behavior, connector routing, status indication, and production programming. The 56-QFN package requires careful assembly because its exposed pad and fine-pitch leads make solder bridging and voiding important process concerns. A development board should expose the upstream and downstream connections, the 24 MHz crystal interface, the 3.3 V supply, and the programming interface needed for in-system EEPROM configuration. Bring-up testing should begin with power rails and clock startup, proceed to device enumeration, and then evaluate downstream hot-plug events and emissions with realistic cables.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho CY7C65640B-56LFXC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CY7C65640A-LFXC | CY7C65640A-LTXC |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) |
| Device Type | Line / Bus Controller | USB Hub Controller | USB Hub Controller |
| USB Version | USB 2.0 | USB 2.0 | USB 2.0 |
| Lifecycle Status | Obsolete | Discontinued | Replacement designated by Infineon |
Bảo phân biệt quan trọng
- Integrated USB channel termination reduces external passive-component requirements (vsCY7C65640A-LFXC)
- Defined Infineon replacement path for the A-series package (vsCY7C65640A-LTXC)
- Same-package revision comparison supports controlled substitution (vsCY7C65640A-LFXC)
Ghi chú thiết kế
Use the manufacturer’s 56-QFN reference layout and preserve a continuous ground reference beneath the device. Route upstream and downstream USB channels as short, matched-impedance traces, avoid stubs, and keep the 24 MHz crystal loop compact. Place decoupling capacitors close to their associated supply and ground pins. PCB changes should be checked with USB signal-integrity and compliance testing because incorrect layer transitions, via stubs, or return-path discontinuities can impair operation even when the controller itself is functioning correctly.
The 56-QFN package requires attention to exposed-pad soldering and thermal conductivity. Connect the exposed pad to the appropriate ground or thermal plane as specified by the manufacturer, use the recommended via pattern, and maintain adequate copper area around the package. Avoid separating high-current or switching-regulator paths beneath the controller. Thermal and power behavior must be assessed in the final enclosure because airflow, copper area, adjacent heat sources, and ambient temperature determine the junction-temperature margin.
Do not assume that any same-package member is a drop-in substitute without checking revision-specific pin functions, programming requirements, and qualification status. The CY7C65640A-LFXC and CY7C65640A-LTXC are relevant family candidates, but the published Infineon drop-in statement directly concerns CY7C65640A-LFXC and CY7C65640A-LTXC. Validate the selected CY7C65640B-56LFXC against the manufacturer datasheet, errata, and assembly drawing before releasing a substitution.
The controller operates from a 3.3 V supply, so rail startup, steady-state noise, and downstream USB power must be designed together. Place local high-frequency decoupling near the controller and keep the USB port-supply routing separate from sensitive logic paths where practical. Confirm startup sequencing against the attached devices and verify that downstream current remains within the limits established for the complete hub design rather than treating the controller specification as a complete port-power specification.
Thông tin tuân thủ
The manufacturer datasheet and distributor listing do not establish RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for this exact MPN. AEC-Q100 is treated as not applicable because the device is specified for a commercial 0°C to 70°C temperature range rather than an identified automotive qualification grade.