Infineon

CY8C3444LTI-109 - 50MHz 8-Bit PSoC 3 MCU | Infineon

MPN: CY8C3444LTI-109 ✓ Hoạt động
1.71 V to 5.5 V Vdss 48-QFN (7 x 7 mm) Package 50 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

CY8C3444LTI-109 Tóm tắt

The Infineon Technologies CY8C3444LTI-109 is an 8-bit PSoC 3 CY8C34xx flash-programmable microcontroller with a 50 MHz 8051 core, 16 KB of flash memory, and a 48-QFN 7 x 7 mm package. It supports a 1.71 V to 5.5 V operating range and provides 25 general-purpose I/O, making it suitable for compact embedded control systems.

A PSoC, or Programmable System-on-Chip, combines a microcontroller CPU with configurable analog and digital peripheral blocks in one integrated device. The PSoC 3 architecture belongs to the broader microcontroller hierarchy and places programmable sensing, control, and communication functions alongside a general-purpose processor. This integration can reduce external component count while allowing peripheral behavior to be adapted to a specific application.

The CY8C3444LTI-109 provides a 50 MHz 8051 processor, 16 KB of flash program memory, and 25 I/O in a 48-QFN package. Its 1.71 V to 5.5 V operating-voltage range accommodates low-voltage digital systems and higher-voltage industrial control environments. Flash-programmable architecture supports field configuration and retains the established characteristics of the CY8C34 family.

The key engineering benefit is the combination of an 8051-compatible processing core and programmable system-on-chip resources in a relatively compact package. The 7 x 7 mm QFN format supports dense PCB layouts, while the exposed thermal pad, identified in the package description, provides a direct heat-transfer path when copper area and thermal via layout are implemented appropriately. The 25 available I/O support digital interfaces and external peripheral connections.

Typical applications include industrial control panels, compact sensor-conditioning systems, communications equipment, low-power embedded nodes, and consumer electronic controllers. The 50 MHz operating speed is useful for protocol handling, state-machine control, timing-intensive peripherals, and general embedded processing. The 16 KB flash capacity is appropriate for firmware whose size is modest enough to fit within the device's program-memory limit.

PCB design should preserve the manufacturer's recommended decoupling and exposed-pad layout. Keep input and output connections short, place supporting components close to their associated pins, and provide adequate ground-plane area under the package. Because QFN packages are difficult to inspect visually, stencil design, solder-paste volume, reflow profile, and exposed-pad void control deserve particular attention.

This page organizes the core device specifications, procurement considerations, practical application guidance, and identified same-family drop-in options into an engineering-focused reference. The complete 48-pin signal assignment and detailed peripheral characteristics should be taken from the manufacturer pin-description table and CY8C34-family datasheet before schematic release or PCB layout sign-off.

Bộ thay thế dễ dàng lắp đặt cho CY8C3444LTI-109 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CY8C3444LTI-109 (cùng hình factor và footprint) — khác nhau ở Package, Maximum CPU Frequency, SRAM.

Infineon
Package: 68-VFQFN with exposed pad
SRAM: 2 kByte
So sánh với CY8C3444LTI-109 →
Cypress Semiconductor
Package: 48-VFQFN (7 x 7 mm) with exposed pad
Maximum CPU Frequency: 50 MHz (DC operation)
SRAM: 2 KB
So sánh với CY8C3444LTI-109 →

CY8C3444LTI-114

✅ Drop-In
Infineon
📦 48-QFN (7x7)
8-bit Flash Programmable System-on-Chip (PSoC 3) · 8051, up to 50 MHz · 50 MHz maximum · 16 kByte · 2 kByte · 68-VFQFN with exposed pad · Configurable analog and digital blocks with signal routing · Ultra-low-power PSoC 3 device

Liên hệ để biết giá

Xem tài liệu →

CY8C3444LTI-119T

✅ Drop-In
📦 48-QFN (7x7)
Same 50 MHz 8051 core and 16 KB flash configuration; -119T ordering suffix differs from -109 while the T code identifies the packing option

📋 Tham chiếu thay thế (không có trong danh mục)

CY8C3444LTI-109 Tỷ lệ tối đa & tính chất điện

Product Type Flash Programmable System-on-Chip Microcontroller
Device Family PSoC 3 CY8C34xx
Processor Core 8051, 8-bit
Maximum CPU Frequency 50 MHz
Program Memory Size 16 KB (16K x 8)
SRAM Size 2 KB
Operating Voltage Range 1.71 V to 5.5 V
Number of I/O 25
Hộp 48-QFN (7 x 7 mm)
Package Type QFN with exposed pad
Kiểu lắp đặt Surface Mount
Core Architecture Programmable System-on-Chip
Program Memory Type Flash
Temperature Grade Industrial temperature grade

Hướng dẫn cấu hình chân CY8C3444LTI-109 qfn with exposed pad

Cấu hình chân cho CY8C3444LTI-109 (qfn with exposed pad gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân qfn with exposed pad cho CY8C3444LTI-109

Không có dữ liệu chân cụ thể sẵn có cho CY8C3444LTI-109.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

CY8C3444LTI-109 phù hợp cho 6 Áp dụngs: Industrial Control Module, Sensor Conditioning Node, Communications Controller, Connected Equipment Interface, Low-Power Embedded Controller, Consumer Peripheral Controller.

🏭

Industrial Control Module

The CY8C3444LTI-109 is suitable for a compact industrial control module that coordinates sensors, discrete inputs, and actuator commands. Its 50 MHz 8051 processor supports responsive state-machine control and communication servicing, while 25 I/O provide connections for digital devices. The 1.71 V to 5.5 V operating range accommodates common embedded rails. Place the 48-QFN device centrally and provide short, adequately decoupled connections to minimize switching-induced noise. Check the industrial temperature-grade suffix against the enclosure's worst-case ambient condition before production release.

🧩

Sensor Conditioning Node

The CY8C3444LTI-109 can act as the local controller in a sensor-conditioning node where digital inputs must be measured, filtered, and transmitted. Its configurable PSoC 3 resources support flexible signal handling, while the 50 MHz core provides capacity for time-based acquisition and control logic. The 25 I/O allow digital sensors, status indicators, and host-interface signals to share one controller. Design the analog and digital sections around the manufacturer's pin and grounding guidance, and use the exposed-pad land pattern to maintain electrical and thermal integrity.

🌐

Communications Controller

The CY8C3444LTI-109 is appropriate for a dedicated communications controller that must combine protocol processing with configurable digital functions. Its 50 MHz 8051 core and 16 KB flash provide sufficient capability for compact serial protocols, framing logic, and device management, subject to firmware-size verification. The 48-QFN package supports space-constrained designs, and 25 I/O can serve chip selects, indicators, and interface control. Maintain short return paths for high-speed signals, separate noisy switching nodes from sensitive communications circuitry, and follow the datasheet bypass recommendations.

🖥️

Connected Equipment Interface

The CY8C3444LTI-109 can implement the local control and status interface in connected equipment that combines an Ethernet link with simple machine-specific functions. Its 8051 processor handles command parsing, state management, and peripheral supervision, while the PSoC architecture reduces the need for discrete glue logic. The 1.71 V to 5.5 V range allows integration with multiple embedded supply arrangements. Maintain controlled reference-clock and Ethernet signal routing, observe return-path continuity, and verify the firmware footprint against the 16 KB flash limit.

🔧

Low-Power Embedded Controller

The CY8C3444LTI-109 fits low-power embedded controllers that periodically wake, acquire information, evaluate local conditions, and communicate a result. Its 1.71 V minimum operating voltage supports integration with low-voltage energy-harvesting and battery-derived systems after suitable regulation, while 16 KB flash preserves room for firmware. The 25 I/O support wake inputs, indicators, and external sensors. Optimize quiescent behavior through the device's power-management configuration, validate average current in the actual duty cycle, and confirm external-component leakage against the intended standby budget.

📱

Consumer Peripheral Controller

The CY8C3444LTI-109 can manage a compact consumer peripheral that combines button or encoder input, status lighting, and a host-facing serial connection. The 50 MHz core allows responsive interaction handling without requiring a higher-complexity processor, and the 48-QFN footprint supports dense product layouts. Sixteen kilobytes of flash is suitable for modest firmware, but image size and update requirements should be checked early. Use controlled LED drive arrangements, prevent ground currents from switching loads from disturbing the MCU supply, and follow the QFN paste and reflow recommendations.

What is the CY8C3444LTI-109?
The CY8C3444LTI-109 is an 8-bit Infineon PSoC 3 flash-programmable microcontroller built around a 50 MHz 8051 processor. According to the manufacturer datasheet, the device includes 16 KB of flash memory, 2 KB of SRAM, 25 I/O, and a 48-QFN 7 x 7 mm package with an exposed pad. Its operating-voltage range is 1.71 V to 5.5 V.
What are the key specifications of CY8C3444LTI-109?
The CY8C3444LTI-109 combines a 50 MHz 8051 core, 16 KB of flash, 2 KB of SRAM, and 25 I/O in a 48-QFN package. According to the manufacturer datasheet, it operates from 1.71 V to 5.5 V and uses a flash-programmable PSoC 3 architecture. These specifications place it in the 8-bit embedded-control class with configurable system-on-chip resources.
What is the operating voltage range of CY8C3444LTI-109?
The CY8C3444LTI-109 operates from 1.71 V to 5.5 V. According to the manufacturer datasheet, this range supports both low-voltage digital circuitry and higher-voltage industrial control environments. Supply rails, external sensor interfaces, and pull-up networks must remain within the device limits during both active operation and startup.
Where can I download the CY8C3444LTI-109 datasheet PDF?
The CY8C3444LTI-109 datasheet is available through the linked CY8C34-family datasheet record and the device pages listed on this page. According to the manufacturer documentation, the document covers the 8051 core, flash memory, configurable blocks, electrical characteristics, package information, and pin descriptions. Use the 48-QFN pin table when assigning signals.
Where can I find the CY8C3444LTI-109 pinout?
The CY8C3444LTI-109 uses a 48-QFN 7 x 7 mm pin configuration, and its numbered signal assignment is defined in the CY8C34-family manufacturer datasheet. The package includes an exposed thermal pad. Use the datasheet pin-description table rather than inferring signals from the generic package drawing, especially for programming, power, ground, and analog-capable pins.
What can replace the CY8C3444LTI-109?
The closest identified drop-in candidates are CY8C3444LTI-114 and CY8C3444LTI-119T, both from the same CY8C3444 family. The CY8C3444LTI-114 is identified in a direct comparison listing, while the CY8C3444LTI-119T shares the 50 MHz 8051 core and 16 KB flash configuration. Verify the ordering code, temperature grade, and exposed-pad details before substitution.
What is the best Infineon equivalent for CY8C3444LTI-109?
The best identified Infineon-family equivalent is CY8C3444LTI-114 because it is presented in a direct comparison with the target and retains the CY8C3444 identity and 48-QFN configuration. According to the manufacturer family information, related devices use the same 8051 core, 16 KB flash, and 2 KB SRAM architecture. Confirm package suffix, grade, and lifecycle status before committing to a replacement.
CY8C3444LTI-109 vs CY8C3444LTI-114 - which is better?
Choose CY8C3444LTI-114 when the identical CY8C3444 device family and footprint are desired but the -114 ordering option meets the application requirements. Both belong to the 50 MHz, 16 KB-flash PSoC 3 family. The available comparison record does not expose every electrical difference, so the manufacturer ordering-information table should be checked for temperature-grade and qualification requirements.
When should I choose CY8C3444LTI-109 over CY8C3444LTI-114?
Choose CY8C3444LTI-109 when its specific ordering code, temperature grade, and qualification are required for the design. Choose CY8C3444LTI-114 when that family variant has the required commercial or production status without changing the core architecture. Both provide a 50 MHz 8051 processor and 16 KB flash, but the exact suffix must match procurement and environmental requirements.
Is CY8C3444LTI-109 suitable for industrial control applications?
The CY8C3444LTI-109 is suitable for many embedded industrial-control tasks because it combines a 50 MHz 8051 core, 25 I/O, flash memory, and a 1.71 V to 5.5 V operating range. According to the manufacturer ordering information, the LTI ordering option is an industrial-temperature-grade device. Final suitability still depends on the required ambient range, isolation, environmental qualification, and enclosure.
Can CY8C3444LTI-109 control sensors and communications interfaces?
Yes, the CY8C3444LTI-109 can serve as the central controller in a sensor or communications-oriented embedded design. Its 25 I/O provide digital connections, while the programmable PSoC architecture can reduce the need for separate peripheral devices. The 16 KB flash limit and 50 MHz CPU speed should be checked against firmware size, protocol timing, and required buffering.
What design constraints matter for the CY8C3444LTI-109 QFN package?
The primary layout concern is the 48-QFN 7 x 7 mm package and its exposed thermal pad. According to the manufacturer package information, the exposed pad is not simply an unconnected thermal feature; its electrical assignment must follow the datasheet. Use the recommended land pattern, maintain pad-to-thermal-via alignment, control solder-paste volume, and minimize thermal-via voids.
Is CY8C3444LTI-109 in stock?
Current stock should be confirmed through the Request a Quote form on this page because availability and lead time can change with market demand and lot status. The device is listed as orderable, and one catalog page reports inventory, but that record does not replace a lot-specific quote. Provide the required quantity, package form, date-code preference, and target delivery date with the request.
Where can I buy CY8C3444LTI-109 online?
Use the Request a Quote form on this page to request CY8C3444LTI-109 availability, current commercial terms, and lead time for the required quantity. The exact 48-QFN ordering code should be stated in the request, including any acceptable tape-and-reel or tray preference. This avoids substituting a related suffix whose temperature grade or packing differs.
What is the price and lead time for CY8C3444LTI-109?
The current commercial price and production lead time are provided through the Request a Quote form on this page. Quote requests should include quantity, target delivery date, permissible date codes, and packaging requirements. The part's 16 KB flash capacity, 48-QFN package, and industrial-temperature ordering suffix are important identifiers when obtaining a quote for the exact device.

Dữ liệu tham khảo kỹ thuật cho CY8C3444LTI-109 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose CY8C3444LTI-109 when the exact -109 order code is specified in an approved design, particularly for industrial-temperature applications using the 48-QFN footprint. Its 50 MHz 8051 core and 16 KB flash are appropriate for compact control, sensor, and communications tasks, but firmware growth must be checked carefully. Consider CY8C3444LTI-114 when that ordering option provides the preferred lifecycle or procurement position while preserving the core device family and footprint. Consider CY8C3444LTI-119T when its packing option is required. None of these changes should be made without comparing the complete ordering table, temperature grade, exposed-pad implementation, and qualification requirements. This page identifies only same-family drop-in candidates; no cross-brand equivalent was established with sufficient pin-level evidence.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này CY8C3444LTI-114 CY8C3444LTI-119T
Package 48-QFN (7x7 mm) 48-QFN (7x7 mm) 48-QFN (7x7 mm)
Brand Infineon Technologies Infineon Technologies Infineon Technologies
Processor Core 8051, 8-bit 8051, 8-bit 8051, 8-bit
Maximum CPU Frequency 50 MHz 50 MHz 50 MHz
Program Memory 16 KB flash 16 KB flash 16 KB flash
SRAM 2 KB 2 KB 2 KB
Operating Voltage 1.71 V to 5.5 V 1.71 V to 5.5 V 1.71 V to 5.5 V
Number of I/O 25 25 25
Product Family PSoC 3 CY8C34xx PSoC 3 CY8C34xx PSoC 3 CY8C34xx

Bảo phân biệt quan trọng

  • Original -109 ordering option with the established LTI industrial suffix (vsCY8C3444LTI-114)
  • Compact 48-QFN implementation (vsCY8C3444LTI-119T)
  • Broad embedded-control capability for its class (vsCY8C3444LTI-114)

Ghi chú thiết kế

Use the manufacturer's 48-QFN land pattern and preserve the exposed-pad connection exactly as specified. Place bypass capacitors close to their associated power pins with short ground returns, and avoid routing high-current switching paths beneath the MCU or analog signal areas. Thermal vias beneath the exposed pad should use a controlled diameter, spacing, and filled-via process so solder does not wick away from the perimeter lands.

The exposed pad is the principal heat-transfer path, but it should not be treated as a substitute for package thermal analysis. Provide continuous ground-plane area and an uninterrupted copper connection under the package. Account for copper layers, board material, enclosure airflow, and nearby heat sources when estimating junction temperature. Avoid placing the device directly above a thermally restrictive slot or isolated copper region.

Do not select a similarly named CY8C3444 order code based only on the final suffix. Confirm the 48-QFN package, exposed-pad construction, temperature grade, programming method, tape-and-reel or tray requirement, and lifecycle status. After substitution, compare the device identification, pin table, electrical limits, and firmware startup assumptions. A package-compatible family member is not automatically equivalent for every qualification requirement.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The CY8C3444LTI-109 is identified as an industrial-temperature-grade ordering option. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation before a compliance declaration is made.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

CY8C3444LTI-109 datasheet CY8C3444LTI-109 pinout CY8C3444LTI-109 datasheet pdf CY8C3444LTI-109 equivalent CY8C3444LTI-109 replacement CY8C3444LTI-109 cross reference CY8C3444LTI-109 footprint CY8C3444LTI-109 price CY8C3444LTI-109 stock Infineon CY8C3444LTI-109 CY8C3444LTI-109 vs CY8C3444LTI-114 CY8C3444LTI-109 application circuit

Các bộ phận và thuật ngữ liên quan

Infineon Technologies CY8C3444LTI-109 CY8C3444LTI-114 CY8C3444LTI-119T PSoC 3 CY8C34xx 8051 processor 8-bit microcontroller flash-programmable system-on-chip programmable system-on-chip 16 KB flash memory 2 KB SRAM 50 MHz clock 1.71 V to 5.5 V operating voltage 25 general-purpose I/O 48-QFN package QFN package family surface-mount package exposed thermal pad industrial control sensor conditioning embedded communications controller configurable digital peripheral blocks flash memory
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ