CY8C3444LTI-109 - 50MHz 8-Bit PSoC 3 MCU | Infineon
料号: CY8C3444LTI-109 ✓ 量产中CY8C3444LTI-109 概述
A PSoC, or Programmable System-on-Chip, combines a microcontroller CPU with configurable analog and digital peripheral blocks in one integrated device. The PSoC 3 architecture belongs to the broader microcontroller hierarchy and places programmable sensing, control, and communication functions alongside a general-purpose processor. This integration can reduce external component count while allowing peripheral behavior to be adapted to a specific application.
The CY8C3444LTI-109 provides a 50 MHz 8051 processor, 16 KB of flash program memory, and 25 I/O in a 48-QFN package. Its 1.71 V to 5.5 V operating-voltage range accommodates low-voltage digital systems and higher-voltage industrial control environments. Flash-programmable architecture supports field configuration and retains the established characteristics of the CY8C34 family.
The key engineering benefit is the combination of an 8051-compatible processing core and programmable system-on-chip resources in a relatively compact package. The 7 x 7 mm QFN format supports dense PCB layouts, while the exposed thermal pad, identified in the package description, provides a direct heat-transfer path when copper area and thermal via layout are implemented appropriately. The 25 available I/O support digital interfaces and external peripheral connections.
Typical applications include industrial control panels, compact sensor-conditioning systems, communications equipment, low-power embedded nodes, and consumer electronic controllers. The 50 MHz operating speed is useful for protocol handling, state-machine control, timing-intensive peripherals, and general embedded processing. The 16 KB flash capacity is appropriate for firmware whose size is modest enough to fit within the device's program-memory limit.
PCB design should preserve the manufacturer's recommended decoupling and exposed-pad layout. Keep input and output connections short, place supporting components close to their associated pins, and provide adequate ground-plane area under the package. Because QFN packages are difficult to inspect visually, stencil design, solder-paste volume, reflow profile, and exposed-pad void control deserve particular attention.
This page organizes the core device specifications, procurement considerations, practical application guidance, and identified same-family drop-in options into an engineering-focused reference. The complete 48-pin signal assignment and detailed peripheral characteristics should be taken from the manufacturer pin-description table and CY8C34-family datasheet before schematic release or PCB layout sign-off.
直接替换替代料: CY8C3444LTI-109 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: CY8C3444LTI-109 (相同外形与封装尺寸) ——差异在于 Package, Maximum CPU Frequency, SRAM.
CY8C3444LTI-114
✅ 直接替换联系询价
查看数据手册 →CY8C3444LTI-119T
✅ 直接替换📋 参考替代料(不在目录中)
CY8C3444LTI-109 最大额定值与电气特性
| Product Type | Flash Programmable System-on-Chip Microcontroller |
| Device Family | PSoC 3 CY8C34xx |
| Processor Core | 8051, 8-bit |
| Maximum CPU Frequency | 50 MHz |
| Program Memory Size | 16 KB (16K x 8) |
| SRAM Size | 2 KB |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Number of I/O | 25 |
| 封装 | 48-QFN (7 x 7 mm) |
| Package Type | QFN with exposed pad |
| 安装类型 | Surface Mount |
| Core Architecture | Programmable System-on-Chip |
| Program Memory Type | Flash |
| Temperature Grade | Industrial temperature grade |
CY8C3444LTI-109 qfn with exposed pad 引脚配置指南
CY8C3444LTI-109(qfn with exposed pad 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: CY8C3444LTI-109.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CY8C3444LTI-109 适用于 6 应用s: Industrial Control Module, Sensor Conditioning Node, Communications Controller, Connected Equipment Interface, Low-Power Embedded Controller, Consumer Peripheral Controller.
Industrial Control Module
The CY8C3444LTI-109 is suitable for a compact industrial control module that coordinates sensors, discrete inputs, and actuator commands. Its 50 MHz 8051 processor supports responsive state-machine control and communication servicing, while 25 I/O provide connections for digital devices. The 1.71 V to 5.5 V operating range accommodates common embedded rails. Place the 48-QFN device centrally and provide short, adequately decoupled connections to minimize switching-induced noise. Check the industrial temperature-grade suffix against the enclosure's worst-case ambient condition before production release.
推荐
Sensor Conditioning Node
The CY8C3444LTI-109 can act as the local controller in a sensor-conditioning node where digital inputs must be measured, filtered, and transmitted. Its configurable PSoC 3 resources support flexible signal handling, while the 50 MHz core provides capacity for time-based acquisition and control logic. The 25 I/O allow digital sensors, status indicators, and host-interface signals to share one controller. Design the analog and digital sections around the manufacturer's pin and grounding guidance, and use the exposed-pad land pattern to maintain electrical and thermal integrity.
推荐
Communications Controller
The CY8C3444LTI-109 is appropriate for a dedicated communications controller that must combine protocol processing with configurable digital functions. Its 50 MHz 8051 core and 16 KB flash provide sufficient capability for compact serial protocols, framing logic, and device management, subject to firmware-size verification. The 48-QFN package supports space-constrained designs, and 25 I/O can serve chip selects, indicators, and interface control. Maintain short return paths for high-speed signals, separate noisy switching nodes from sensitive communications circuitry, and follow the datasheet bypass recommendations.
推荐
Connected Equipment Interface
The CY8C3444LTI-109 can implement the local control and status interface in connected equipment that combines an Ethernet link with simple machine-specific functions. Its 8051 processor handles command parsing, state management, and peripheral supervision, while the PSoC architecture reduces the need for discrete glue logic. The 1.71 V to 5.5 V range allows integration with multiple embedded supply arrangements. Maintain controlled reference-clock and Ethernet signal routing, observe return-path continuity, and verify the firmware footprint against the 16 KB flash limit.
推荐
Low-Power Embedded Controller
The CY8C3444LTI-109 fits low-power embedded controllers that periodically wake, acquire information, evaluate local conditions, and communicate a result. Its 1.71 V minimum operating voltage supports integration with low-voltage energy-harvesting and battery-derived systems after suitable regulation, while 16 KB flash preserves room for firmware. The 25 I/O support wake inputs, indicators, and external sensors. Optimize quiescent behavior through the device's power-management configuration, validate average current in the actual duty cycle, and confirm external-component leakage against the intended standby budget.
推荐
Consumer Peripheral Controller
The CY8C3444LTI-109 can manage a compact consumer peripheral that combines button or encoder input, status lighting, and a host-facing serial connection. The 50 MHz core allows responsive interaction handling without requiring a higher-complexity processor, and the 48-QFN footprint supports dense product layouts. Sixteen kilobytes of flash is suitable for modest firmware, but image size and update requirements should be checked early. Use controlled LED drive arrangements, prevent ground currents from switching loads from disturbing the MCU supply, and follow the QFN paste and reflow recommendations.
推荐
推荐产品汇总
工程参考数据: CY8C3444LTI-109 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | CY8C3444LTI-114 | CY8C3444LTI-119T |
|---|---|---|---|
| Package | 48-QFN (7x7 mm) | 48-QFN (7x7 mm) | 48-QFN (7x7 mm) |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Processor Core | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz |
| Program Memory | 16 KB flash | 16 KB flash | 16 KB flash |
| SRAM | 2 KB | 2 KB | 2 KB |
| Operating Voltage | 1.71 V to 5.5 V | 1.71 V to 5.5 V | 1.71 V to 5.5 V |
| Number of I/O | 25 | 25 | 25 |
| Product Family | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx |
关键差异点
- Original -109 ordering option with the established LTI industrial suffix (对比 CY8C3444LTI-114)
- Compact 48-QFN implementation (对比 CY8C3444LTI-119T)
- Broad embedded-control capability for its class (对比 CY8C3444LTI-114)
设计说明
Use the manufacturer's 48-QFN land pattern and preserve the exposed-pad connection exactly as specified. Place bypass capacitors close to their associated power pins with short ground returns, and avoid routing high-current switching paths beneath the MCU or analog signal areas. Thermal vias beneath the exposed pad should use a controlled diameter, spacing, and filled-via process so solder does not wick away from the perimeter lands.
The exposed pad is the principal heat-transfer path, but it should not be treated as a substitute for package thermal analysis. Provide continuous ground-plane area and an uninterrupted copper connection under the package. Account for copper layers, board material, enclosure airflow, and nearby heat sources when estimating junction temperature. Avoid placing the device directly above a thermally restrictive slot or isolated copper region.
Do not select a similarly named CY8C3444 order code based only on the final suffix. Confirm the 48-QFN package, exposed-pad construction, temperature grade, programming method, tape-and-reel or tray requirement, and lifecycle status. After substitution, compare the device identification, pin table, electrical limits, and firmware startup assumptions. A package-compatible family member is not automatically equivalent for every qualification requirement.
合规信息
The CY8C3444LTI-109 is identified as an industrial-temperature-grade ordering option. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation before a compliance declaration is made.