Infineon

CY8C4013SXI-400 - 16MHz Cortex-M0 MCU, 8KB Flash | Infineon

MPN: CY8C4013SXI-400 ✓ Hoạt động
1.71 V to 5.5 V Vdss 8-pin SOIC Package 16 MHz Speed 8 kB flash Memory
MOQ: 1 |

CY8C4013SXI-400 Tóm tắt

The Infineon CY8C4013SXI-400 is a PSoC 4000 programmable system-on-chip with a 32-bit Arm Cortex-M0 processor, operating at up to 16 MHz, and packaged in an 8-pin SOIC. It integrates 8 kB of flash memory, 2 kB of SRAM, programmable analog and digital resources, and flexible automatic routing in a compact mixed-signal microcontroller.

A programmable system-on-chip, or PSoC, combines a microcontroller core with configurable analog and digital peripherals on one semiconductor device. Unlike a conventional fixed-function MCU, a PSoC can place programmable blocks around the CPU and route them to external pins according to the application. This makes the architecture useful for compact controls that require sensing, signal conditioning, control logic, and communications without a high external component count.

The CY8C4013SXI-400 operates from a 1.71 V to 5.5 V supply range, providing compatibility with both low-voltage and conventional 5 V systems. Its 8 kB flash stores the control program, while 2 kB of SRAM supports working memory for the application. The 16 MHz Cortex-M0 core provides deterministic execution for simple control loops, and the 8-pin SOIC package supports compact, surface-mount PCB layouts.

The part belongs to the CY8C4000 family, whose configurable analog and digital blocks can simplify peripheral integration. Infineon identifies mixer motor control as an application for this device. Other practical uses include LED dimming, keypad and button interfaces, compact sensor controllers, and basic actuator-control systems where the limited flash and SRAM budgets are sufficient.

Designers should verify the complete pin-description table and peripheral availability in the manufacturer datasheet before assigning functions to the 8 external pins. Decoupling, programming-interface access, and the unused-pin configuration are as important as the CPU selection in a compact PSoC 4000 design.

This page brings together the verified device characteristics, package details, sourcing information, and practical application guidance. It also identifies same-family PSoC alternatives for design teams evaluating a different flash, SRAM, or temperature option while retaining the 8-pin SOIC footprint.

Bộ thay thế dễ dàng lắp đặt cho CY8C4013SXI-400 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

CY8C4012SXI-400

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 8-pin SOIC
Same PSoC 4000 family and 8-pin SOIC footprint; flash and SRAM capacity are lower than 8 kB and 2 kB, requiring firmware-resource verification

📋 Tham chiếu thay thế (không có trong danh mục)

CY8C4014SXI-400

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 8-pin SOIC
Same PSoC 4000 family and 8-pin SOIC footprint; higher memory capacity than 8 kB flash and 2 kB SRAM, with device-specific pin and resource checks required

📋 Tham chiếu thay thế (không có trong danh mục)

CY8C4011SXI-400

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 8-pin SOIC
Same PSoC 4000 family and 8-pin SOIC footprint; lower flash and SRAM than 8 kB and 2 kB, so the firmware and data budgets must be reduced

📋 Tham chiếu thay thế (không có trong danh mục)

CY8C4013SXI-400 Tỷ lệ tối đa & tính chất điện

Product Type PSoC 4000 programmable system-on-chip microcontroller
CPU Core Arm Cortex-M0
CPU Architecture 32-bit
Maximum CPU Frequency 16 MHz
Program Memory 8 kB flash
Flash Organization 8K x 8
SRAM 2 kB
Điện áp cung cấp hoạt động 1.71 V to 5.5 V
Hộp 8-pin SOIC
Kiểu lắp đặt Surface mount
Architecture PSoC 4000 family
Programmable Resources Programmable and reconfigurable analog and digital blocks
Signal Routing Flexible automatic routing
Primary Application Mixer motor control
Core Count Single core
Product Status Active

Hướng dẫn cấu hình chân CY8C4013SXI-400 8-pin soic

Cấu hình chân cho CY8C4013SXI-400 (8-pin soic gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 8-pin soic cho CY8C4013SXI-400

Không có dữ liệu chân cụ thể sẵn có cho CY8C4013SXI-400.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

CY8C4013SXI-400 phù hợp cho 6 Áp dụngs: Mixer Motor Control, LED Dimming and Lighting Control, Button and Keypad Interface Controller, Compact Sensor Controller, Small Actuator and Auxiliary Control, Low-Cost Data Acquisition Node.

🏭

Mixer Motor Control

The CY8C4013SXI-400 is directly aligned with mixer motor control because Infineon identifies this use case for the device. Its 16 MHz Arm Cortex-M0 core can execute speed commands, button logic, timers, and protection sequences, while the programmable analog and digital blocks can assist with control and signal routing. The 8 kB flash and 2 kB SRAM fit compact firmware that does not require large buffers or complex communications stacks. Use the 1.71 V to 5.5 V operating range to match the motor-driver interface, and validate startup, stall, and thermal conditions in the complete mixer system.

💡

LED Dimming and Lighting Control

The CY8C4013SXI-400 fits compact LED-dimming modules where an MCU, control outputs, and analog functions must share a limited footprint. Its programmable blocks allow timing, pulse-width modulation, and input conditioning to be implemented in the PSoC configuration rather than entirely in fixed peripherals and external components. The 16 MHz Cortex-M0 core supports responsive dimming updates, and the 8 kB flash is suitable for a compact control loop with a short UI. The 1.71 V to 5.5 V supply range allows use in both 3.3 V and 5 V designs.

🔧

Button and Keypad Interface Controller

The CY8C4013SXI-400 can serve as a dedicated controller for buttons, keypads, and simple human-interface panels. Debouncing and input mapping can be handled by the Cortex-M0 firmware, while programmable digital blocks may reduce repetitive timing work and provide flexible routing to external pins. With 2 kB of SRAM, the device supports modest scan buffers and event queues without attempting large display or network workloads. Its 8-pin SOIC package helps maintain a compact control module, and the wide 1.71 V to 5.5 V range supports both low-voltage and 5 V panel electronics.

🧩

Compact Sensor Controller

The CY8C4013SXI-400 is appropriate for compact sensing nodes that combine local conditioning, thresholding, and digital reporting. The PSoC architecture integrates programmable analog and digital resources around the 16 MHz Cortex-M0 core, reducing the need for separate fixed-function interface chips in suitable designs. Its 1.71 V to 5.5 V range permits operation from low-voltage sensor rails through conventional 5 V systems, while 8 kB of flash and 2 kB of SRAM support compact application firmware. Confirm the required converter, comparator, and digital-resource capabilities in the device configuration before committing to the part.

⚡

Small Actuator and Auxiliary Control

The CY8C4013SXI-400 can manage low-complexity actuators, relays, valves, and auxiliary mechanisms when the main controller only requires deterministic sequencing. The 16 MHz Cortex-M0 core handles timers, state machines, interlocks, and fault flags, while programmable digital blocks support flexible pin routing and timing. The device is most appropriate when firmware fits within 8 kB of flash and active data fits within 2 kB of SRAM. In inductive or motor-driven loads, keep switching transients and supply disturbances outside the operating limits verified for the PSoC.

📡

Low-Cost Data Acquisition Node

The CY8C4013SXI-400 can form the control core of a small data-acquisition node that samples limited channels, applies configured filters, and forwards results through a simple serial interface. Programmable analog and digital blocks allow signal paths to be adapted, while the Cortex-M0 processor performs scaling, control, and buffering. The 2 kB SRAM limits simultaneous sample depth, so use DMA-style buffering or streaming transfer where possible. Its 1.71 V to 5.5 V supply range and compact 8-pin SOIC package suit compact sensor boards, subject to the analog and converter requirements of each channel.

What is the CY8C4013SXI-400?
The CY8C4013SXI-400 is an Infineon PSoC 4000 mixed-signal microcontroller built around a 32-bit Arm Cortex-M0 core. It operates at up to 16 MHz, includes 8 kB of flash and 2 kB of SRAM, and uses an 8-pin SOIC package. Its programmable analog and digital blocks distinguish it from a conventional fixed-function MCU. Infineon identifies mixer motor control as a target application.
What is the operating voltage of the CY8C4013SXI-400?
The CY8C4013SXI-400 operates from 1.71 V to 5.5 V according to the Infineon product page. That range supports low-voltage mixed-signal designs as well as systems built around a conventional 5 V rail. The operating-voltage limits must still be checked against the internal blocks and peripherals enabled in the final design, particularly when combining functions that operate at different voltage domains.
How much flash and SRAM does the CY8C4013SXI-400 have?
The CY8C4013SXI-400 provides 8 kB of flash and 2 kB of SRAM. The flash holds the executable firmware, while the SRAM is available for working data and stack operations. These resources place the device in the entry-level PSoC 4000 category, so firmware size, buffering, and any local protocol handling must be planned before the design is committed.
What is the maximum clock frequency of the CY8C4013SXI-400?
The maximum CPU clock frequency of the CY8C4013SXI-400 is 16 MHz. The manufacturer listing identifies the part as a 32-bit Arm Cortex-M0 PSoC 4 device with a 16 MHz operating frequency. This speed is appropriate for responsive control loops, digital sensing, and general embedded logic, but it should not be treated as a high-performance digital signal-processing core.
Where can I download the CY8C4013SXI-400 datasheet?
The official CY8C4013SXI-400 product and documentation resources are available from the Infineon product page at https://www.infineon.com/part/CY8C4013SXI-400. From that page, open the datasheet and device documentation resources. The pin-description table, electrical characteristics, ordering information, and peripheral details should be taken from the manufacturer document for the exact ordering code.
Where can I find the CY8C4013SXI-400 pinout?
The authoritative CY8C4013SXI-400 pinout is the pin-description table in the Infineon device datasheet and package drawings. The device is an 8-pin SOIC, but the function assigned to every package lead should be taken from that table rather than inferred from another PSoC 4000 member. Pay particular attention to supply, ground, programming-interface, and no-connect assignments when laying out the PCB.
Is the CY8C4013SXI-400 suitable for LED dimming and user controls?
Yes, the CY8C4013SXI-400 is suitable for LED dimming, button input, and compact LED-control designs. Its PSoC architecture combines programmable analog and digital blocks with an Arm Cortex-M0 core, while the 1.71 V to 5.5 V operating range accommodates both 5 V and low-voltage systems. The 8 kB flash and 2 kB SRAM suit compact control firmware, provided application buffering remains modest.
What are the key specifications of the CY8C4013SXI-400?
The key CY8C4013SXI-400 specifications are a 32-bit Arm Cortex-M0 core, a maximum frequency of 16 MHz, 8 kB of flash, 2 kB of SRAM, a 1.71 V to 5.5 V supply range, and an 8-pin SOIC package. The device also provides programmable and reconfigurable analog and digital blocks with flexible automatic routing, allowing several control functions to share the same small footprint.
What can replace the CY8C4013SXI-400?
The closest same-family alternatives are the 8-pin SOIC PSoC 4000 devices listed on this page, which differ primarily in memory capacity, temperature grade, or other ordering parameters. A replacement should be selected only after confirming the same 8-pin SOIC footprint, pin functions, supply range, flash requirement, SRAM requirement, and peripheral configuration. Firmware may also require adjustment when the flash or SRAM capacity changes.
What is the best drop-in replacement for the CY8C4013SXI-400?
The best drop-in replacement is the PSoC 4000 variant with the same 8-pin SOIC pinout, equal or greater flash and SRAM, compatible supply range, and an acceptable temperature grade. The same-family candidates identified for this page are closer than devices from unrelated MCU families because their programmable peripheral architecture and programming model remain similar. Confirm every pin assignment and resource requirement in the manufacturer datasheet before substitution.
Can the CY8C4013SXI-400 control a mixer motor?
Yes. Infineon explicitly identifies mixer motor control as an application for the CY8C4013SXI-400. Its 16 MHz Cortex-M0 core can execute motor-control logic, while the programmable analog and digital blocks can support sensing and signal conditioning. The 8 kB flash and 2 kB SRAM are adequate for compact control firmware, but motor protection, current sensing, and timing should be verified against the application requirements.
When should I choose the CY8C4013SXI-400 instead of another MCU?
Choose the CY8C4013SXI-400 when the design benefits from programmable mixed-signal blocks, a compact 8-pin SOIC footprint, and operation from 1.71 V to 5.5 V. It is a better fit than a general-purpose MCU when analog and digital functions can be integrated on the same die. Choose another MCU when the application needs more flash, more SRAM, larger I/O counts, or a specific peripheral that this device cannot provide.
Is the CY8C4013SXI-400 suitable for a 5 V industrial control module?
The CY8C4013SXI-400 is electrically compatible with a 5 V module because its specified operating supply range extends to 5.5 V. It can suit compact controls with button inputs, LED outputs, or low-speed motor-control functions, provided the external interface signals also tolerate the selected rail. Industrial suitability still depends on temperature grade, EMC design, isolation requirements, and regulatory context.
Where can I buy the CY8C4013SXI-400 and check current availability?
Use the Request a Quote form on this page to request current availability, quantity breaks, and lead time for the CY8C4013SXI-400. The exact inventory status can change with procurement volume and date code requirements. Confirm the manufacturer ordering code, package, and tube-packaging notation before releasing a purchase order so the correct physical part is supplied.
How do I choose between CY8C4012SXI-400 and CY8C4013SXI-400?
Choose between the CY8C4012SXI-400 and CY8C4013SXI-400 by comparing flash, SRAM, and temperature-grade requirements against the firmware and operating environment. The CY8C4013SXI-400 is specified with 8 kB of flash, 2 kB of SRAM, and a 16 MHz Cortex-M0 core. Select the smaller variant only when its memory budget is sufficient and verify its electrical limits in the manufacturer datasheet before releasing the design.
Is the CY8C4013SXI-400 an ARM Cortex-M0 microcontroller?
Yes, the CY8C4013SXI-400 is a 32-bit Arm Cortex-M0 microcontroller in the PSoC 4000 family. It runs at up to 16 MHz and combines the Cortex-M0 core with programmable analog and digital blocks and flexible automatic routing. Use an Arm Cortex-M0-compatible software toolchain and the PSoC configuration environment when developing and programming the device.

Dữ liệu tham khảo kỹ thuật cho CY8C4013SXI-400 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the CY8C4013SXI-400 for compact controls that benefit from configurable analog and digital blocks, a 16 MHz 32-bit Arm Cortex-M0 core, and an 8-pin SOIC footprint. It is particularly suitable for mixer motor control, LED dimming, button interfaces, and small sensor-controller designs. The 8 kB flash and 2 kB SRAM are sufficient for focused firmware but can become limiting for protocol stacks, large data buffers, or graphical interfaces.

Choose the CY8C4014SXI-400 when the design needs more flash while retaining the same family and footprint. Choose the CY8C4012SXI-400 or CY8C4011SXI-400 when lower memory is sufficient and compactness has priority over future code growth. For any substitution, confirm the package pin map, peripheral resources, temperature grade, and operating limits in the manufacturer datasheet. Cross-family MCUs should be considered only when their pinout, electrical characteristics, peripheral resources, and software requirements are explicitly validated.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này CY8C4012SXI-400 CY8C4014SXI-400 CY8C4011SXI-400
Brand Infineon Infineon Infineon Infineon
Package 8-pin SOIC 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same
CPU Core Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0
Maximum CPU Frequency 16 MHz 16 MHz 16 MHz 16 MHz
Flash Memory 8 kB 4 kB 16 kB 2 kB
SRAM 2 kB 1 kB 2 kB 1 kB
Operating Supply Voltage 1.71 V to 5.5 V 1.71 V to 5.5 V 1.71 V to 5.5 V 1.71 V to 5.5 V
Programmable Architecture PSoC 4000 analog and digital blocks PSoC 4000 analog and digital blocks PSoC 4000 analog and digital blocks PSoC 4000 analog and digital blocks
Primary Application Mixer motor control General PSoC 4000 control General PSoC 4000 control General PSoC 4000 control

Bảo phân biệt quan trọng

  • Mixed-signal integration in a compact 8-pin package (vsATMEGA48PA-MN)
  • Higher clock rate for general-purpose control (vsATMEGA48PA-MN)
  • 32-bit processing with 8 kB flash and 2 kB SRAM (vsATTINY13A-SUR)

Ghi chú thiết kế

Assign every one of the eight SOIC leads from the manufacturer pin-description table before routing the PCB. The compact package provides little room for footprint errors, and PSoC 4000 pins can have multiple peripheral functions. Preserve access to the programming interface, route the supply and ground pins directly, and use a local bypass capacitor close to the device. Verify the recommended capacitor value and placement in the manufacturer hardware-design guidance.

Keep the operating supply within the specified 1.71 V to 5.5 V range, including transient excursions caused by switching loads connected to the same board. The PSoC 4000 architecture supports low-voltage operation, but enabling analog and digital blocks can affect current demand and internal voltage requirements. Confirm the power budget for the final peripheral configuration, and provide adequate bypass capacitance to prevent supply ripple from disturbing sensitive analog functions.

Do not assume that every PSoC 4000 member has identical programmable resources, package pins, or memory limits. Configure the exact CY8C4013SXI-400 device in the PSoC design tool, review the generated pin map, and confirm that the chosen flash and SRAM budgets fit the compiled firmware. Firmware written for another 4013-series ordering option may require adjustment if its peripheral set or memory configuration differs.

Place the device so that programming-test pads and signal-routing escape points remain accessible on an assembled board. For designs using the configurable analog blocks, keep sensitive analog inputs away from fast digital edges and switching-node copper. Although the 8-pin SOIC package is small, pin 1 orientation and the exposed relationship between package lead numbering and the schematic symbol should be checked against the package drawing before fabrication.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No explicit RoHS, REACH, halogen-free, or conflict-minerals declarations were included in the manufacturer page extract. Confirm product compliance and AEC-Q100 status in the manufacturer documentation for the exact ordering code.

Tìm kiếm liên quan

CY8C4013SXI-400 datasheet CY8C4013SXI-400 pinout CY8C4013SXI-400 datasheet pdf CY8C4013SXI-400 specifications Infineon CY8C4013SXI-400 CY8C4013SXI-400 price CY8C4013SXI-400 stock CY8C4013SXI-400 equivalent CY8C4013SXI-400 replacement CY8C4013SXI-400 cross reference CY8C4013SXI-400 8-SOIC footprint CY8C4013SXI-400 mixer motor control CY8C4013SXI-400 vs CY8C4012SXI-400 what is the CY8C4013SXI-400 where to buy CY8C4013SXI-400

Các bộ phận và thuật ngữ liên quan

Infineon CY8C4013SXI-400 PSoC 4000 Arm Cortex-M0 Arm programmable system-on-chip PSoC microcontroller MCU mixed-signal microcontroller semiconductor 8-pin SOIC SOIC package family surface-mount package 8 kB flash 2 kB SRAM 16 MHz 1.71 V to 5.5 V programmable analog blocks programmable digital blocks flexible automatic routing mixer motor control LED dimming sensor controller
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ