CY8C4013SXI-400 - 16MHz Cortex-M0 MCU, 8KB Flash | Infineon
MPN: CY8C4013SXI-400 ✓ 啟用中CY8C4013SXI-400 概覽
A programmable system-on-chip, or PSoC, combines a microcontroller core with configurable analog and digital peripherals on one semiconductor device. Unlike a conventional fixed-function MCU, a PSoC can place programmable blocks around the CPU and route them to external pins according to the application. This makes the architecture useful for compact controls that require sensing, signal conditioning, control logic, and communications without a high external component count.
The CY8C4013SXI-400 operates from a 1.71 V to 5.5 V supply range, providing compatibility with both low-voltage and conventional 5 V systems. Its 8 kB flash stores the control program, while 2 kB of SRAM supports working memory for the application. The 16 MHz Cortex-M0 core provides deterministic execution for simple control loops, and the 8-pin SOIC package supports compact, surface-mount PCB layouts.
The part belongs to the CY8C4000 family, whose configurable analog and digital blocks can simplify peripheral integration. Infineon identifies mixer motor control as an application for this device. Other practical uses include LED dimming, keypad and button interfaces, compact sensor controllers, and basic actuator-control systems where the limited flash and SRAM budgets are sufficient.
Designers should verify the complete pin-description table and peripheral availability in the manufacturer datasheet before assigning functions to the 8 external pins. Decoupling, programming-interface access, and the unused-pin configuration are as important as the CPU selection in a compact PSoC 4000 design.
This page brings together the verified device characteristics, package details, sourcing information, and practical application guidance. It also identifies same-family PSoC alternatives for design teams evaluating a different flash, SRAM, or temperature option while retaining the 8-pin SOIC footprint.
直接替換替代品,適用於 CY8C4013SXI-400 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
CY8C4012SXI-400
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
CY8C4014SXI-400
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
CY8C4011SXI-400
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
CY8C4013SXI-400 最大額定值與電氣特性
| Product Type | PSoC 4000 programmable system-on-chip microcontroller |
| CPU Core | Arm Cortex-M0 |
| CPU Architecture | 32-bit |
| Maximum CPU Frequency | 16 MHz |
| Program Memory | 8 kB flash |
| Flash Organization | 8K x 8 |
| SRAM | 2 kB |
| 工作電源電壓 | 1.71 V to 5.5 V |
| 封裝 | 8-pin SOIC |
| 安裝類型 | Surface mount |
| Architecture | PSoC 4000 family |
| Programmable Resources | Programmable and reconfigurable analog and digital blocks |
| Signal Routing | Flexible automatic routing |
| Primary Application | Mixer motor control |
| Core Count | Single core |
| Product Status | Active |
CY8C4013SXI-400 8-pin soic 腳位配置指南
CY8C4013SXI-400(8-pin soic 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CY8C4013SXI-400.
請參閱 資料表 以查看完整腳位配置。
典型應用
CY8C4013SXI-400 適用於 6 應用s: Mixer Motor Control, LED Dimming and Lighting Control, Button and Keypad Interface Controller, Compact Sensor Controller, Small Actuator and Auxiliary Control, Low-Cost Data Acquisition Node.
Mixer Motor Control
The CY8C4013SXI-400 is directly aligned with mixer motor control because Infineon identifies this use case for the device. Its 16 MHz Arm Cortex-M0 core can execute speed commands, button logic, timers, and protection sequences, while the programmable analog and digital blocks can assist with control and signal routing. The 8 kB flash and 2 kB SRAM fit compact firmware that does not require large buffers or complex communications stacks. Use the 1.71 V to 5.5 V operating range to match the motor-driver interface, and validate startup, stall, and thermal conditions in the complete mixer system.
推薦
LED Dimming and Lighting Control
The CY8C4013SXI-400 fits compact LED-dimming modules where an MCU, control outputs, and analog functions must share a limited footprint. Its programmable blocks allow timing, pulse-width modulation, and input conditioning to be implemented in the PSoC configuration rather than entirely in fixed peripherals and external components. The 16 MHz Cortex-M0 core supports responsive dimming updates, and the 8 kB flash is suitable for a compact control loop with a short UI. The 1.71 V to 5.5 V supply range allows use in both 3.3 V and 5 V designs.
推薦
Button and Keypad Interface Controller
The CY8C4013SXI-400 can serve as a dedicated controller for buttons, keypads, and simple human-interface panels. Debouncing and input mapping can be handled by the Cortex-M0 firmware, while programmable digital blocks may reduce repetitive timing work and provide flexible routing to external pins. With 2 kB of SRAM, the device supports modest scan buffers and event queues without attempting large display or network workloads. Its 8-pin SOIC package helps maintain a compact control module, and the wide 1.71 V to 5.5 V range supports both low-voltage and 5 V panel electronics.
推薦
Compact Sensor Controller
The CY8C4013SXI-400 is appropriate for compact sensing nodes that combine local conditioning, thresholding, and digital reporting. The PSoC architecture integrates programmable analog and digital resources around the 16 MHz Cortex-M0 core, reducing the need for separate fixed-function interface chips in suitable designs. Its 1.71 V to 5.5 V range permits operation from low-voltage sensor rails through conventional 5 V systems, while 8 kB of flash and 2 kB of SRAM support compact application firmware. Confirm the required converter, comparator, and digital-resource capabilities in the device configuration before committing to the part.
推薦
Small Actuator and Auxiliary Control
The CY8C4013SXI-400 can manage low-complexity actuators, relays, valves, and auxiliary mechanisms when the main controller only requires deterministic sequencing. The 16 MHz Cortex-M0 core handles timers, state machines, interlocks, and fault flags, while programmable digital blocks support flexible pin routing and timing. The device is most appropriate when firmware fits within 8 kB of flash and active data fits within 2 kB of SRAM. In inductive or motor-driven loads, keep switching transients and supply disturbances outside the operating limits verified for the PSoC.
推薦
Low-Cost Data Acquisition Node
The CY8C4013SXI-400 can form the control core of a small data-acquisition node that samples limited channels, applies configured filters, and forwards results through a simple serial interface. Programmable analog and digital blocks allow signal paths to be adapted, while the Cortex-M0 processor performs scaling, control, and buffering. The 2 kB SRAM limits simultaneous sample depth, so use DMA-style buffering or streaming transfer where possible. Its 1.71 V to 5.5 V supply range and compact 8-pin SOIC package suit compact sensor boards, subject to the analog and converter requirements of each channel.
推薦
推薦產品摘要
工程參考資料,適用於 CY8C4013SXI-400 — 比較、設計指引及合規資訊。
選型指南
Choose the CY8C4014SXI-400 when the design needs more flash while retaining the same family and footprint. Choose the CY8C4012SXI-400 or CY8C4011SXI-400 when lower memory is sufficient and compactness has priority over future code growth. For any substitution, confirm the package pin map, peripheral resources, temperature grade, and operating limits in the manufacturer datasheet. Cross-family MCUs should be considered only when their pinout, electrical characteristics, peripheral resources, and software requirements are explicitly validated.
與替代品比較
| 參數 | 本產品 | CY8C4012SXI-400 | CY8C4014SXI-400 | CY8C4011SXI-400 |
|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon |
| Package | 8-pin SOIC | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same |
| CPU Core | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum CPU Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 8 kB | 4 kB | 16 kB | 2 kB |
| SRAM | 2 kB | 1 kB | 2 kB | 1 kB |
| Operating Supply Voltage | 1.71 V to 5.5 V | 1.71 V to 5.5 V | 1.71 V to 5.5 V | 1.71 V to 5.5 V |
| Programmable Architecture | PSoC 4000 analog and digital blocks | PSoC 4000 analog and digital blocks | PSoC 4000 analog and digital blocks | PSoC 4000 analog and digital blocks |
| Primary Application | Mixer motor control | General PSoC 4000 control | General PSoC 4000 control | General PSoC 4000 control |
主要差異化特點
- Mixed-signal integration in a compact 8-pin package (對比ATMEGA48PA-MN)
- Higher clock rate for general-purpose control (對比ATMEGA48PA-MN)
- 32-bit processing with 8 kB flash and 2 kB SRAM (對比ATTINY13A-SUR)
設計說明
Assign every one of the eight SOIC leads from the manufacturer pin-description table before routing the PCB. The compact package provides little room for footprint errors, and PSoC 4000 pins can have multiple peripheral functions. Preserve access to the programming interface, route the supply and ground pins directly, and use a local bypass capacitor close to the device. Verify the recommended capacitor value and placement in the manufacturer hardware-design guidance.
Keep the operating supply within the specified 1.71 V to 5.5 V range, including transient excursions caused by switching loads connected to the same board. The PSoC 4000 architecture supports low-voltage operation, but enabling analog and digital blocks can affect current demand and internal voltage requirements. Confirm the power budget for the final peripheral configuration, and provide adequate bypass capacitance to prevent supply ripple from disturbing sensitive analog functions.
Do not assume that every PSoC 4000 member has identical programmable resources, package pins, or memory limits. Configure the exact CY8C4013SXI-400 device in the PSoC design tool, review the generated pin map, and confirm that the chosen flash and SRAM budgets fit the compiled firmware. Firmware written for another 4013-series ordering option may require adjustment if its peripheral set or memory configuration differs.
Place the device so that programming-test pads and signal-routing escape points remain accessible on an assembled board. For designs using the configurable analog blocks, keep sensitive analog inputs away from fast digital edges and switching-node copper. Although the 8-pin SOIC package is small, pin 1 orientation and the exposed relationship between package lead numbering and the schematic symbol should be checked against the package drawing before fabrication.
合規資訊
No explicit RoHS, REACH, halogen-free, or conflict-minerals declarations were included in the manufacturer page extract. Confirm product compliance and AEC-Q100 status in the manufacturer documentation for the exact ordering code.