CY8C4013SXI-400 - 16MHz Cortex-M0 MCU, 8KB Flash | Infineon
부품 번호: CY8C4013SXI-400 ✓ 활성CY8C4013SXI-400 개요
A programmable system-on-chip, or PSoC, combines a microcontroller core with configurable analog and digital peripherals on one semiconductor device. Unlike a conventional fixed-function MCU, a PSoC can place programmable blocks around the CPU and route them to external pins according to the application. This makes the architecture useful for compact controls that require sensing, signal conditioning, control logic, and communications without a high external component count.
The CY8C4013SXI-400 operates from a 1.71 V to 5.5 V supply range, providing compatibility with both low-voltage and conventional 5 V systems. Its 8 kB flash stores the control program, while 2 kB of SRAM supports working memory for the application. The 16 MHz Cortex-M0 core provides deterministic execution for simple control loops, and the 8-pin SOIC package supports compact, surface-mount PCB layouts.
The part belongs to the CY8C4000 family, whose configurable analog and digital blocks can simplify peripheral integration. Infineon identifies mixer motor control as an application for this device. Other practical uses include LED dimming, keypad and button interfaces, compact sensor controllers, and basic actuator-control systems where the limited flash and SRAM budgets are sufficient.
Designers should verify the complete pin-description table and peripheral availability in the manufacturer datasheet before assigning functions to the 8 external pins. Decoupling, programming-interface access, and the unused-pin configuration are as important as the CPU selection in a compact PSoC 4000 design.
This page brings together the verified device characteristics, package details, sourcing information, and practical application guidance. It also identifies same-family PSoC alternatives for design teams evaluating a different flash, SRAM, or temperature option while retaining the 8-pin SOIC footprint.
드롭인 대체품: CY8C4013SXI-400 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
CY8C4012SXI-400
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
CY8C4014SXI-400
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
CY8C4011SXI-400
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
CY8C4013SXI-400 최대 정격 & 전기적 특성
| Product Type | PSoC 4000 programmable system-on-chip microcontroller |
| CPU Core | Arm Cortex-M0 |
| CPU Architecture | 32-bit |
| Maximum CPU Frequency | 16 MHz |
| Program Memory | 8 kB flash |
| Flash Organization | 8K x 8 |
| SRAM | 2 kB |
| 동작 공급 전압 | 1.71 V to 5.5 V |
| 패키지 | 8-pin SOIC |
| 실장 유형 | Surface mount |
| Architecture | PSoC 4000 family |
| Programmable Resources | Programmable and reconfigurable analog and digital blocks |
| Signal Routing | Flexible automatic routing |
| Primary Application | Mixer motor control |
| Core Count | Single core |
| Product Status | Active |
CY8C4013SXI-400 8-pin soic 핀 구성 가이드
CY8C4013SXI-400(8-pin soic 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CY8C4013SXI-400.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CY8C4013SXI-400 적합 용도: 6 애플리케이션s: Mixer Motor Control, LED Dimming and Lighting Control, Button and Keypad Interface Controller, Compact Sensor Controller, Small Actuator and Auxiliary Control, Low-Cost Data Acquisition Node.
Mixer Motor Control
The CY8C4013SXI-400 is directly aligned with mixer motor control because Infineon identifies this use case for the device. Its 16 MHz Arm Cortex-M0 core can execute speed commands, button logic, timers, and protection sequences, while the programmable analog and digital blocks can assist with control and signal routing. The 8 kB flash and 2 kB SRAM fit compact firmware that does not require large buffers or complex communications stacks. Use the 1.71 V to 5.5 V operating range to match the motor-driver interface, and validate startup, stall, and thermal conditions in the complete mixer system.
추천
LED Dimming and Lighting Control
The CY8C4013SXI-400 fits compact LED-dimming modules where an MCU, control outputs, and analog functions must share a limited footprint. Its programmable blocks allow timing, pulse-width modulation, and input conditioning to be implemented in the PSoC configuration rather than entirely in fixed peripherals and external components. The 16 MHz Cortex-M0 core supports responsive dimming updates, and the 8 kB flash is suitable for a compact control loop with a short UI. The 1.71 V to 5.5 V supply range allows use in both 3.3 V and 5 V designs.
추천
Button and Keypad Interface Controller
The CY8C4013SXI-400 can serve as a dedicated controller for buttons, keypads, and simple human-interface panels. Debouncing and input mapping can be handled by the Cortex-M0 firmware, while programmable digital blocks may reduce repetitive timing work and provide flexible routing to external pins. With 2 kB of SRAM, the device supports modest scan buffers and event queues without attempting large display or network workloads. Its 8-pin SOIC package helps maintain a compact control module, and the wide 1.71 V to 5.5 V range supports both low-voltage and 5 V panel electronics.
추천
Compact Sensor Controller
The CY8C4013SXI-400 is appropriate for compact sensing nodes that combine local conditioning, thresholding, and digital reporting. The PSoC architecture integrates programmable analog and digital resources around the 16 MHz Cortex-M0 core, reducing the need for separate fixed-function interface chips in suitable designs. Its 1.71 V to 5.5 V range permits operation from low-voltage sensor rails through conventional 5 V systems, while 8 kB of flash and 2 kB of SRAM support compact application firmware. Confirm the required converter, comparator, and digital-resource capabilities in the device configuration before committing to the part.
추천
Small Actuator and Auxiliary Control
The CY8C4013SXI-400 can manage low-complexity actuators, relays, valves, and auxiliary mechanisms when the main controller only requires deterministic sequencing. The 16 MHz Cortex-M0 core handles timers, state machines, interlocks, and fault flags, while programmable digital blocks support flexible pin routing and timing. The device is most appropriate when firmware fits within 8 kB of flash and active data fits within 2 kB of SRAM. In inductive or motor-driven loads, keep switching transients and supply disturbances outside the operating limits verified for the PSoC.
추천
Low-Cost Data Acquisition Node
The CY8C4013SXI-400 can form the control core of a small data-acquisition node that samples limited channels, applies configured filters, and forwards results through a simple serial interface. Programmable analog and digital blocks allow signal paths to be adapted, while the Cortex-M0 processor performs scaling, control, and buffering. The 2 kB SRAM limits simultaneous sample depth, so use DMA-style buffering or streaming transfer where possible. Its 1.71 V to 5.5 V supply range and compact 8-pin SOIC package suit compact sensor boards, subject to the analog and converter requirements of each channel.
추천
추천 제품 요약
엔지니어링 참조 데이터: CY8C4013SXI-400 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
Choose the CY8C4014SXI-400 when the design needs more flash while retaining the same family and footprint. Choose the CY8C4012SXI-400 or CY8C4011SXI-400 when lower memory is sufficient and compactness has priority over future code growth. For any substitution, confirm the package pin map, peripheral resources, temperature grade, and operating limits in the manufacturer datasheet. Cross-family MCUs should be considered only when their pinout, electrical characteristics, peripheral resources, and software requirements are explicitly validated.
대체품과의 비교
| 파라미터 | 이 제품 | CY8C4012SXI-400 | CY8C4014SXI-400 | CY8C4011SXI-400 |
|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon |
| Package | 8-pin SOIC | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same |
| CPU Core | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum CPU Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 8 kB | 4 kB | 16 kB | 2 kB |
| SRAM | 2 kB | 1 kB | 2 kB | 1 kB |
| Operating Supply Voltage | 1.71 V to 5.5 V | 1.71 V to 5.5 V | 1.71 V to 5.5 V | 1.71 V to 5.5 V |
| Programmable Architecture | PSoC 4000 analog and digital blocks | PSoC 4000 analog and digital blocks | PSoC 4000 analog and digital blocks | PSoC 4000 analog and digital blocks |
| Primary Application | Mixer motor control | General PSoC 4000 control | General PSoC 4000 control | General PSoC 4000 control |
주요 차별점
- Mixed-signal integration in a compact 8-pin package (vs ATMEGA48PA-MN)
- Higher clock rate for general-purpose control (vs ATMEGA48PA-MN)
- 32-bit processing with 8 kB flash and 2 kB SRAM (vs ATTINY13A-SUR)
설계 노트
Assign every one of the eight SOIC leads from the manufacturer pin-description table before routing the PCB. The compact package provides little room for footprint errors, and PSoC 4000 pins can have multiple peripheral functions. Preserve access to the programming interface, route the supply and ground pins directly, and use a local bypass capacitor close to the device. Verify the recommended capacitor value and placement in the manufacturer hardware-design guidance.
Keep the operating supply within the specified 1.71 V to 5.5 V range, including transient excursions caused by switching loads connected to the same board. The PSoC 4000 architecture supports low-voltage operation, but enabling analog and digital blocks can affect current demand and internal voltage requirements. Confirm the power budget for the final peripheral configuration, and provide adequate bypass capacitance to prevent supply ripple from disturbing sensitive analog functions.
Do not assume that every PSoC 4000 member has identical programmable resources, package pins, or memory limits. Configure the exact CY8C4013SXI-400 device in the PSoC design tool, review the generated pin map, and confirm that the chosen flash and SRAM budgets fit the compiled firmware. Firmware written for another 4013-series ordering option may require adjustment if its peripheral set or memory configuration differs.
Place the device so that programming-test pads and signal-routing escape points remain accessible on an assembled board. For designs using the configurable analog blocks, keep sensitive analog inputs away from fast digital edges and switching-node copper. Although the 8-pin SOIC package is small, pin 1 orientation and the exposed relationship between package lead numbering and the schematic symbol should be checked against the package drawing before fabrication.
규정 준수 정보
No explicit RoHS, REACH, halogen-free, or conflict-minerals declarations were included in the manufacturer page extract. Confirm product compliance and AEC-Q100 status in the manufacturer documentation for the exact ordering code.