CYBLE-022001-00 - Bluetooth LE 4.1 PSoC 4 Module 128 KB | Infineon
MPN: CYBLE-022001-00 ✓ Hoạt độngCYBLE-022001-00 Tóm tắt
An RF transceiver module (also called an RF module or BLE module) is a pre-certified subsystem that bundles a radio IC, matching network, crystal, antenna, and optional microcontroller into a single tested hardware unit, eliminating the need for designers to qualify the RF chain themselves. The CYBLE-022001-00 sits in the RF & Wireless > RF Modules subcategory of the broader Power/Connectivity semiconductor ecosystem and supports Bluetooth v4.1 LE with a 1 Mbps air data rate over the 2.4 GHz ISM band.
Key features include 16 configurable GPIOs (with exposed ADC, PWM, UART, SPI, and I2C peripherals), an integrated ARM Cortex-M0 core, -92 dBm RX sensitivity for extended range, and up to +3 dBm programmable TX output power. Module-level FCC/IC/CE/MIC regulatory certifications substantially reduce end-product qualification time.
Architecture depth: The module is built around the Infineon PSoC 4 BLE silicon (CYBL1XX7X family), which combines a 32-bit ARM Cortex-M0 CPU, configurable analog and digital blocks (the famous PSoC UDB/PLD fabric), CapSense touch support, and a 2.4 GHz radio. An onboard 32 kHz watch crystal and a 24 MHz main crystal are included, plus all RF matching components and the chip antenna. Flash is 128 KB, SRAM is 16 KB.
Typical applications include BLE beaconing wearables, wireless HID peripherals (keyboards/mice/remote controls), industrial sensor telemetry nodes, smart-home lighting controllers, medical device accessory links, and proximity/marketing beacons where a small, certified, low-power radio drop is required.
Design consideration: Because the module is pre-certified, no antenna-matching network is required - the user PCB only needs to expose the 10 x 10 mm land pattern and reserve adequate clearance around the antenna keep-out zone to maintain radiated performance.
This page synthesizes distributor pricing, drop-in compatible module variants (CYBLE-222005-00, CYBLE-222014-01), and practical design notes not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho CYBLE-022001-00 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CYBLE-022001-00 (cùng hình factor và footprint) — khác nhau ở Antenna, Bluetooth Version, Core, Flash Memory, Frequency Band.
CYBLE-222005-00
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CYBLE-222014-01
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CYBLE-013025-00
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
CYBLE-212019-00
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
CYBLE-202007-00
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
CYBLE-022001-00 Thông số kỹ thuật (bản công bố của nhà sản xuất)
| Product Type | Bluetooth Low Energy Module |
| Series | EZ-BLE PRoC |
| Bluetooth Version | Bluetooth v4.1 LE |
| Frequency Band | 2.4 GHz ISM |
| Maximum Air Data Rate | 1 Mbps |
| Core | ARM Cortex-M0 (PSoC 4 BLE) |
| Flash Memory | 128 KB |
| GPIOs | 16 |
| Package / Module Size | 10 mm x 10 mm x 1.80 mm |
| Kiểu lắp đặt | Surface Mount |
| Antenna | Integrated chip antenna |
| Onboard Crystal | 32 kHz watch + 24 MHz main |
| Trạng thái RoHS | Compliant |
Giao diện và cáp kết nối CYBLE-022001-00
CYBLE-022001-00 mở ra các giao diện và cáp kết nối sau được công bố bởi nhà sản xuất: Bluetooth. Các chân mở rộng, số thứ tự cáp kết nối và giới hạn điện học được xác định trong tài liệu hướng dẫn của nhà sản xuất.
| Bluetooth | Bluetooth v4.1 LE |
Tham khảo: hướng dẫn của nhà sản xuất cho bản đồ chân cổng mở rộng và số thứ tự chân kết nối đầy đủ.
Ứng dụng tiêu biểu
CYBLE-022001-00 phù hợp cho 6 Áp dụngs: BLE Beaconing Wearables, Wireless HID Peripherals (Keyboard/Mouse/Remote), Industrial Sensor Telemetry Nodes, Smart-Home Lighting Controllers, Medical Device Accessory Links, Proximity and Marketing Beacons.
BLE Beaconing Wearables
The CYBLE-022001-00 is well suited for iBeacon/Eddystone beacons and BLE-wearable devices thanks to its 2.4 GHz integrated chip antenna, pre-certified FCC/IC/CE/MIC radio compliance, and PSoC 4 BLE low-power modes. With 128 KB flash and 16 KB SRAM it has plenty of room for the BLE stack plus beacon profile and battery estimation firmware, while the 10 x 10 x 1.80 mm footprint fits wristbands and pendants. Placed on a small coin-cell PCB, the module streams advertising packets at hundreds of ms intervals while drawing micro-amps in deep-sleep - much simpler than designing a discrete radio chain.
Được đề xuất
Wireless HID Peripherals (Keyboard/Mouse/Remote)
The CYBLE-022001-00 powers BLE Human Interface Device peripherals: Bluetooth Low Energy keyboards, mice, presentation remotes, game controllers. The PSoC 4 BLE silicon's 16 GPIOs can scan keyboard matrices, drive PWM motor feedback, and host the BLE HID-over-GATT profile in firmware, while the integrated chip antenna removes the need for an external antenna and the module's small footprint fits thin consumer enclosures. Unlike a bare BLE SoC, the module arrives pre-certified so end-product CE/FCC testing wraps faster.
Được đề xuất
Industrial Sensor Telemetry Nodes
Industrial sensor telemetry nodes for BLE-to-cloud bridging commonly use the CYBLE-022001-00 because the 128 KB flash hosts the BLE stack plus sensor drivers and OTA-bootloader, and the ARM Cortex-M0 core runs low-energy advertising intervals in the seconds-to-minutes range for sub-mA average current. The 16 GPIO count handles UART/SPI sensor interfaces plus digital I/O for control loops. The module's temperature tolerance and small footprint let it drop onto remote sensor PCBs retrofitted into existing 4-20 mA wiring.
Được đề xuất
Smart-Home Lighting Controllers
Smart-home lighting and smart-lighting controllers use the CYBLE-022001-00 as a BLE-comms front-end to mains-dimmable LED drivers. The 16 GPIOs drive PWM outputs (PSoC 4 BLE has TCPWM blocks) for flicker-free dimming, while the BLE radio connects to phone apps for color and brightness commands. The pre-certified module avoids the FCC/IC retest cycle that custom RF designs would force on the OEM lighting fixture. For multi-protocol hubs (BLE+Zigbee+Thread), consider the upgraded CYBLE-222005-00 with twice the flash.
Được đề xuất
Medical Device Accessory Links
The CYBLE-022001-00 fits medical device accessory links (BLE glucose meter dongles, smart inhaler add-ons, BLE thermometer gateways) because the PSoC 4 BLE silicon includes a SAR ADC, CapSense touch, and a Crypto block for secure pairing. The 128 KB flash holds the medical BLE profile plus device-side encrypted log buffer, while the 10 x 10 mm module shrinks the dongle PCB area. Designers favor the pre-certified 2.4 GHz radio here because accessory-level FDA submissions only need to confirm the radio module is unmodified.
Được đề xuất
Proximity and Marketing Beacons
BLE proximity and marketing-beacon products (retail beacons, indoor navigation, asset tracking tags) deploy the CYBLE-022001-00 because it ships with a BLE stack that already implements GATT services used by iBeacon/Eddystone/AltBeacon profile frameworks. The integrated chip antenna and onboard 32 kHz/24 MHz crystals shrink the BOM to almost zero external parts, extending coin-cell battery life to months or years depending on advertising interval. Upgrading to CYBLE-222005-00 yields more flash for multi-protocol beacon firmware if needed.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CYBLE-022001-00 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CYBLE-222005-00 | CYBLE-222014-01 | CYBLE-013025-00 | CYBLE-212019-00 | CYBLE-202007-00 |
|---|---|---|---|---|---|---|
| Package | 10 x 10 x 1.80 mm module | 10 x 10 x 1.80 mm module (same) | 10 x 10 x 1.80 mm module (same family) | 10 x 10 x 1.80 mm module (same family) | 10 x 10 x 1.80 mm module (same family) | 10 x 10 x 1.80 mm module (same family) |
| Brand | Infineon (was Cypress) | Infineon | Infineon | Infineon | Infineon | Infineon |
| Flash Memory | 128 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Bluetooth Version | v4.1 LE | v4.2 LE | v5.0 LE | v5.0 LE | v5.1 LE | v5.1 LE |
| Module Certification | FCC/IC/CE/MIC pre-certified | FCC/IC/CE/MIC pre-certified | FCC/IC/CE/MIC pre-certified | FCC/IC/CE pre-certified | FCC/IC/CE pre-certified | FCC/IC/CE pre-certified |
| Antenna | Integrated chip antenna | Integrated chip antenna | Integrated chip antenna | Integrated chip antenna | Integrated chip antenna | Integrated chip antenna |
Bảo phân biệt quan trọng
- Largest flash in same-price drop-in footprint (vsCYBLE-222005-00)
- Lower entry cost vs newer Bluetooth 5 variants (vsCYBLE-222014-01 (BT 5.0))
- Module-level FCC/IC/CE/MIC pre-certification (vsBare PSoC 4 BLE SoC)
- 16 programmable GPIOs in 10 x 10 mm (vsLarger competitor BLE modules)
Ghi chú thiết kế
Reserve a copper-free keep-out zone under and around the chip antenna per the CYBLE-022001-00 datasheet antenna footprint. No ground plane, traces, or copper pour should be placed under the antenna area, and the antenna should be near a board edge with free space for radiated patterns. Estimated: the keep-out zone typically measures ~5 x 5 mm on a 1.6 mm FR-4 board; placing copper too close degrades return loss and range even though the module is pre-certified.
Place a 1 uF X7R ceramic decoupling capacitor within 3 mm of the module's VDD pad and a 4.7 uF bulk capacitor on the same rail to handle BLE TX current spikes (transient draw can exceed 15 mA during a packet burst). Estimated: at 3.3 V VDD and -20 dBm to +3 dBm output power, average current is sub-15 mA but peaks during TX burst; insufficient decoupling causes brownouts and dropped packets. PSoC 4 BLE deep-sleep current is in the low micro-amps but only with all GPIOs configured correctly - see the silicon datasheet for routing retention rules.
Do not assume module-level FCC/IC/CE certification transfers if the customer PCB adds significant RF-disturbing structures near the antenna (coin-cell batteries, large copper fills, or metal enclosures). The pre-certification covers only the unmodified module in its reference test fixture. A second round of intentional radiator testing in the final enclosure is the OEM's responsibility. Also confirm the firmware-side CYBLE-222005-00 vs CYBLE-022001-00 retargeting is done in PSoC Creator before taping out - the BLE stack and pin map differ even with identical PCB footprints.
Keep the castellated module edge pads clean and avoid solder-mask openings larger than the pad itself. Reflow profile should follow JEDEC J-STD-020 MSL-3 conditions (peak 245 C). Use a 4-6 mil solder paste deposit and ensure castellated edges receive adequate paste volume - insufficient solder on the edge pads is the number-one cause of field failures in production CYBLE modules per Infineon application notes.
Thông tin tuân thủ
Module-level FCC, IC (Canada), CE (Europe), MIC (Japan), KC (Korea) certifications per the Infineon/Cypress datasheet. RoHS and lead-free confirmed by Infineon product page; halogen-free status not explicitly listed in the verified excerpts. AEC-Q100 not applicable for a Bluetooth module.
