Vishay Intertechnology

DG213DJ - 4-Channel 60 Ohm CMOS Analog Switch | Vishay

MPN: DG213DJ ✗ Cuối đời
22 V Vdss 30 mA Id 60 ohm Rds(on) 16-pin PDIP Package
MOQ: 1 |

DG213DJ Tóm tắt

The Vishay Intertechnology DG213DJ is a four-circuit, 1:1 CMOS analog switch with 60 ohm on-resistance, a 16-pin PDIP package, and support for signals up to ±22 V when operated from dual supplies. It also accepts single-supply operation, providing flexible routing for instrumentation, telecommunications, process-control, and computer-peripheral circuits. The switching array includes low 20 pA leakage and an 85 ns turn-on time, making it suitable for precision analog paths that require controlled impedance and fast isolation behavior.

An analog switch is an integrated semiconductor device that connects or disconnects an analog signal path under digital control. Unlike a mechanical relay, it can change state rapidly without mechanical wear. The DG213DJ belongs to the analog switch, interface IC, and semiconductor hierarchy. Its CMOS implementation provides low leakage, while the 1:1 circuit configuration routes one source path to one switched output without changing the signal polarity.

Key features include a 22 V supply-voltage rating, 45 ohm low on-resistance, TTL-compatible and CMOS-compatible control logic, and 20 pA low leakage. The design supports both dual-supply operation up to ±22 V and single-rail operation up to 36 V. A continuous current rating of 30 mA makes the device appropriate for instrumentation and general-purpose analog routing rather than high-current power switching. The improved charge-injection compensation helps reduce switching transients in sensitive measurement circuits.

The DG213DJ uses a complementary CMOS switch architecture optimized for general-purpose signal isolation. Its low leakage limits unwanted disturbance on high-impedance nodes, while the specified 85 ns turn-on time supports reasonably fast control-response requirements. An epitaxial layer is used to reduce latch-up risk, and the low on-resistance limits signal attenuation when the switch is closed. Designers should still evaluate channel capacitance, charge injection, and off-isolation across the intended operating bandwidth.

Typical applications include sample-and-hold systems, test and measurement equipment, process-control interfaces, telecommunications equipment, and computer peripherals. The device can route test, sensor, or control signals to a shared amplifier or converter. In precision systems, its low leakage and charge-injection compensation help preserve small-signal integrity, while its TTL-compatible control inputs simplify connection to legacy digital logic.

A primary design consideration is ensuring that the control input levels meet the device's logic thresholds and that supply and signal voltages remain within the specified operating range. Place bypass capacitors close to the supply pins and route high-impedance signal traces away from switching-control and supply-return paths. Check absolute maximum ratings when switching signals that may exceed the nominal supply range.

This page combines the manufacturer's electrical characteristics with lifecycle information, drop-in replacement analysis, application guidance, and package-specific design considerations. It helps engineers evaluate the DG213DJ for signal-routing designs, identify lifecycle risks, and plan source transitions without overlooking analog performance constraints.

Bộ thay thế dễ dàng lắp đặt cho DG213DJ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

DG213DJ-E3

✅ Drop-In
📦 16-PDIP
Same 60 ohm four-circuit 1:1 switching configuration and 16-PDIP footprint; ordering suffix differs, while no other measurable functional difference is stated.

📋 Tham chiếu thay thế (không có trong danh mục)

MAX4603EPE+

✅ Drop-In
📦 16-PDIP
Maximum voltage is 30 V versus the DG213DJ's ±22 V dual-supply capability, a reduction of at least 10 V at the positive limit and requiring voltage-condition verification.

📋 Tham chiếu thay thế (không có trong danh mục)

DG213DJ Tỷ lệ tối đa & tính chất điện

Number of Circuits 4 circuits
Switch Configuration 1:1 SPST-NO/NC
Architecture Complementary CMOS analog switch
Rated On-Resistance 60 ohm
Low On-Resistance 45 ohm
Low Leakage 20 pA
Turn-On Time 85 ns
Supply Voltage Rating 22 V
Dual-Supply Signal Handling Up to ±22 V
Single-Supply Signal Handling Up to 36 V
Continuous Current Rating 30 mA
Logic Compatibility TTL and CMOS compatible
Latch-Up Protection Epitaxial layer
Hộp 16-pin PDIP
Kiểu lắp đặt Through-hole
Trạng thái vòng đời Obsolete

Hướng dẫn cấu hình chân DG213DJ 16-pin pdip

Cấu hình chân cho DG213DJ (16-pin pdip gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 16-pin pdip cho DG213DJ

Không có dữ liệu chân cụ thể sẵn có cho DG213DJ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

DG213DJ phù hợp cho 6 Áp dụngs: Precision Instrumentation Signal Routing, Sample-and-Hold Signal Paths, Process-Control Signal Isolation, Telecommunications Signal Routing, Computer-Peripheral Interfacing, Test and Measurement Equipment.

🔧

Precision Instrumentation Signal Routing

The DG213DJ suits precision instrumentation because its four 1:1 switch channels provide 60 ohm rated on-resistance, 20 pA leakage, and charge-injection compensation for reducing switching transients. Place the device between a sensor or test input and the measuring amplifier, then use separate control signals to isolate channels. Its 85 ns turn-on time supports responsive selection, although the 30 mA continuous current limit means it should not be used as a power relay.

📊

Sample-and-Hold Signal Paths

The DG213DJ can route acquisition inputs into a sample-and-hold or measurement front end through its four complementary CMOS channels. Low 20 pA leakage helps preserve charge at high-impedance sampling nodes, while the 1:1 configuration avoids signal inversion. Confirm acquisition time, channel capacitance, and control overlap in the system timing, and use the improved charge-injection compensation as a starting point rather than assuming zero switching error.

🏭

Process-Control Signal Isolation

The DG213DJ is appropriate for process-control systems that must route several low-level control or sensor signals while isolating inactive channels. Its 20 pA leakage reduces unwanted coupling into high-impedance inputs, and its 60 ohm on-resistance is suitable for many instrumentation paths. The extended switching function also supports signals up to ±22 V under dual-supply operation, although each signal must remain within the complete electrical-characteristic table.

🌐

Telecommunications Signal Routing

In telecommunications equipment, the DG213DJ can multiplex or isolate lines feeding measurement, conversion, or monitoring circuits. The four independent 1:1 channels, 85 ns turn-on time, and TTL-compatible control logic simplify interface with digital control systems. Its continuous current rating of 30 mA is adequate for signal routing but not for load switching, so designers should verify input levels, off-isolation, and bandwidth for each line.

🖥️

Computer-Peripheral Interfacing

The DG213DJ fits general-purpose computer-peripheral interfaces that require fast, low-leakage analog routing between functional blocks. It can connect an external line to an internal converter or measurement amplifier without mechanical switching delay. The 16-pin PDIP package supports through-hole boards, and the 85 ns turn-on time is adequate for moderate-speed control paths. Check supply sequencing and ensure logic thresholds remain valid during startup.

🧪

Test and Measurement Equipment

The DG213DJ can route test signals among input, output, and reference sections in automated test equipment. Four channels reduce the number of discrete routing elements, while 20 pA leakage and compensated charge injection help protect precision measurements. Its 85 ns switching time supports moderate-speed test sequencing, but system settling must include the time required for the connected source and measurement network to respond.

What is the DG213DJ?
The DG213DJ is a four-circuit, 1:1 complementary CMOS analog switch from Vishay Intertechnology. It is packaged in a 16-pin PDIP and is designed for routing analog signals with a rated on-resistance of 60 ohm. The device can handle signals up to ±22 V with dual supplies and supports single-rail operation up to 36 V.
What are the key specifications of DG213DJ that engineers should know?
The DG213DJ combines four 1:1 analog-switch circuits, 60 ohm rated on-resistance, 45 ohm low on-resistance, 20 pA leakage, and an 85 ns turn-on time in a 16-pin PDIP. According to the Vishay Intertechnology datasheet, it also supports TTL- and CMOS-compatible logic, continuous current up to 30 mA, and dual-supply signal operation up to ±22 V.
Where can I download the DG213DJ datasheet PDF?
The official Vishay Intertechnology DG213DJ datasheet PDF is available at https://www.vishay.com/docs/70662/dg213.pdf. It contains the electrical characteristics, logic configuration, pin arrangement, switching characteristics, and application guidance for the four-circuit complementary CMOS analog switch.
Where can I find the DG213DJ pinout?
The DG213DJ pin arrangement is shown in the Vishay Intertechnology datasheet at https://www.vishay.com/docs/70662/dg213.pdf. Use the pin-description table and package drawing in that document when assigning the four control inputs, supply pins, ground pins, and eight analog terminals on the 16-pin PDIP.
Can DG213DJ operate from a single supply?
Yes, the DG213DJ supports single-supply operation. The Vishay Intertechnology datasheet identifies single-supply operation as a feature, and the device can handle single-rail signals up to 36 V. The exact allowed supply and signal combination for each channel must remain within the datasheet operating limits.
What is the on-resistance of DG213DJ?
The DG213DJ has a rated on-resistance of 60 ohm and a listed low on-resistance of 45 ohm. According to the Vishay Intertechnology datasheet, these values depend on the control input state and test conditions. Use the complete characteristic table when calculating insertion loss for a specific supply voltage.
How fast is the DG213DJ analog switch?
The DG213DJ has a specified turn-on time of 85 ns. According to the Vishay Intertechnology datasheet, its complementary CMOS design provides fast switching for general-purpose analog routing. Overall system delay also depends on the control-driver propagation delay, channel capacitance, load impedance, and the selected operating conditions.
What can replace the obsolete DG213DJ?
The DG213DJ-E3 is the closest same-manufacturer 16-pin alternative, while the MAX4603EPE+ is identified as a drop-in option with a narrower voltage range. The DG213DJ-E3 preserves the 60 ohm switching-device characteristics and 16-PDIP footprint, but its suffix identifies a different ordering configuration rather than a separate functional design.
Is the MAX4603EPE+ pin-compatible with the DG213DJ?
The MAX4603EPE+ is identified as a pin-compatible 16-pin alternative to the DG213DJ, but its maximum voltage rating is 30 V versus the DG213DJ's ability to handle signals up to ±22 V under dual supplies. Confirm control thresholds, off-isolation, charge injection, and signal-voltage limits against the final circuit requirements before substitution.
When should I choose DG213DJ over MAX4603EPE+?
Choose the DG213DJ when the circuit may use dual supplies or requires the higher signal-handling capability associated with its ±22 V dual-supply operation. The MAX4603EPE+ may be preferable for lower-voltage designs after its 30 V maximum rating and all timing parameters have been checked. The DG213DJ is obsolete, so lifecycle planning remains essential.
DG213DJ vs MAX4603EPE+ - which is better for high-voltage switching?
The DG213DJ is the better match for applications needing the higher voltage range because it supports signals up to ±22 V with dual supplies, while the MAX4603EPE+ is limited to 30 V maximum. Both are presented as 16-pin drop-in options, but the DG213DJ's obsolete lifecycle status makes the MAX4603EPE+ potentially more practical for new production designs.
Is DG213DJ suitable for instrumentation and process-control systems?
Yes, the DG213DJ is suitable for instrumentation and process-control signal routing when its voltage, current, leakage, and switching limits satisfy the design. Its 20 pA leakage and charge-injection compensation are useful for high-impedance measurements, while the 30 mA continuous rating supports general-purpose rather than power-switching loads.
Where can I buy DG213DJ online?
Use the Request a Quote form on this page to ask for DG213DJ availability, sourcing support, and an appropriate transition plan. Because the DG213DJ is listed as obsolete, a quotation request should include the required quantity, package suffix, target delivery timing, and whether a lifecycle redesign or drop-in replacement is acceptable.
What is the price of DG213DJ?
The current DG213DJ quotation is handled through the Request a Quote form on this page. Because the part is obsolete and its availability can change, request a binding quotation that states the exact MPN, package suffix, quantity, lead time, and any traceability requirements rather than relying on a historical listing price.
What is the lead time for DG213DJ?
Submit the required quantity and target delivery date through the Request a Quote form on this page to obtain a current lead-time commitment. The DG213DJ is listed as obsolete, so lead time can depend on remaining factory inventory, authorized supply, and whether a redesign is required.
Is DG213DJ in stock?
Current DG213DJ stock status should be confirmed through the Request a Quote form on this page. The device is listed as obsolete, so apparent inventory may be limited and may not represent new production. Include your required date, quantity, and acceptable alternate sourcing conditions in the request.

Dữ liệu tham khảo kỹ thuật cho DG213DJ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the DG213DJ when maintaining an existing 16-PDIP design requires the original four-channel, 1:1 CMOS switching behavior and a signal range of up to ±22 V under dual supplies. Its 45 ohm low on-resistance, 20 pA leakage, and compensated charge injection remain useful in precision instrumentation. However, the obsolete lifecycle status makes it unsuitable as the default choice for new designs without a sourcing review. DG213DJ-E3 is the closest same-manufacturer option for an approved reorder, while the MAX4603EPE+ can serve as a cross-brand drop-in when its lower 30 V maximum rating, logic thresholds, leakage, timing, and channel performance satisfy the application. For new high-precision products, evaluate modern alternatives even when the footprint is similar, because older switch ICs may offer limited charge-injection, bandwidth, and lifecycle options.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này DG213DJ-E3 MAX4603EPE+
Brand Vishay Intertechnology Vishay Intertechnology Maxim Integrated
Package 16-PDIP 16-PDIP - same package 16-PDIP - same package
Number of Circuits 4 circuits 4 circuits 4 circuits
Switch Configuration 1:1 SPST-NO/NC 1:1 SPST-NO/NC 1:1
Maximum Voltage ±22 V dual supply; 36 V single rail ±22 V dual supply; 36 V single rail 30 V maximum

Bảo phân biệt quan trọng

  • Higher dual-supply signal capability than the MAX4603EPE+ alternative (vsMAX4603EPE+)
  • Complete four-channel complementary CMOS routing in one DIP (vsMAX4603EPE+)
  • Closest same-manufacturer ordering configuration (vsMAX4603EPE+)

Ghi chú thiết kế

Treat the 30 mA continuous current rating as a firm design boundary and use the DG213DJ for analog signal routing rather than power-load switching. Also keep supply, signal, and absolute-maximum voltages within the datasheet limits; the ability to handle signals up to ±22 V with dual supplies does not permit every supply combination. Check the switching-state tables before connecting external circuitry.

For high-impedance measurement nodes, minimize leakage paths and evaluate charge injection at the actual control-driver voltage and source impedance. The DG213DJ specifies 20 pA leakage and uses improved charge-injection compensation, but external leakage, PCB contamination, cable capacitance, and control-edge coupling can dominate the total error. Keep sensitive traces short and use guarding or guarding techniques where practical.

Place the bypass capacitors close to the supply and ground pins, provide a low-impedance return path, and route control traces away from high-impedance analog inputs. Through-hole DIP construction can make long analog traces more susceptible to coupling than a compact surface-mount implementation. Use a ground plane where practical and place the device near the switched source to minimize parasitic capacitance.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The DG213DJ is a general-purpose analog switch rather than an automotive-qualified device. No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

DG213DJ datasheet DG213DJ datasheet pdf DG213DJ pinout DG213DJ equivalent DG213DJ replacement DG213DJ drop-in replacement DG213DJ 16-PDIP DG213DJ on resistance DG213DJ switching time DG213DJ vs MAX4603EPE+ Vishay DG213DJ DG213DJ analog switch DG213DJ price DG213DJ stock DG213DJ obsolete replacement

Các bộ phận và thuật ngữ liên quan

Vishay Intertechnology DG213DJ DG213DJ-E3 MAX4603EPE+ Maxim Integrated quad complementary CMOS analog switch analog switch interface IC semiconductor SPST switch 1:1 signal routing CMOS TTL-compatible logic on-resistance charge injection leakage current 16-PDIP DIP package through-hole package sample-and-hold instrumentation process control telecommunications test and measurement RoHS
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ