EFM32LG880F256G-E-QFP100 - 48MHz ARM Cortex-M3 MCU 256KB | Silicon Labs
MPN: EFM32LG880F256G-E-QFP100 ✓ Hoạt độngEFM32LG880F256G-E-QFP100 Tóm tắt
A 32-bit microcontroller (MCU) is an embedded processor that integrates a CPU core, memory, and peripherals onto a single silicon die. Within the embedded computing hierarchy, an MCU occupies the tier below microprocessors - it sacrifices raw clock speed for deterministic real-time behavior, on-chip memory, and ultra-low standby current. ARM Cortex-M3 cores follow the ARMv7-M architecture with Thumb-2 instruction set, hardware divide-divide, and bit-banding for atomic bit manipulation. The Leopard Gecko (EFM32LG) family adds Silicon Labs' proprietary energy-management peripheral set, making the line a derivative of the energy-friendly EFM32 platform originally developed by Energy Micro and now consolidated under the Silicon Labs portfolio.
Key features include 0.65 uA deep-sleep current in Stop mode, 211 uA/MHz active current in Run mode, autonomous peripherals that operate in sleep, a hardware AES-128 crypto accelerator, and a low-energy UART that can wake the part on a start bit without CPU intervention. The integrated segmented LCD driver supports up to 8x36 segments and is designed for direct bias of low-power glass displays. Supply voltage spans 1.98 V to 3.8 V from a single rail.
Typical applications include battery-powered smart thermostats, wearable fitness bands, electronic shelf labels, remote sensor nodes, and portable medical monitors where years of operation on a coin cell are required. The wide pin-count and LCD interface make it ideal for human-interface end equipment such as industrial HMIs, e-meter displays, and the user-interface panel of home appliances.
Bộ thay thế dễ dàng lắp đặt cho EFM32LG880F256G-E-QFP100 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
EFM32LG880F256G-F-QFP100
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EFM32LG880F128G-E-QFP100
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EFM32LG880F64G-E-QFP100
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EFM32LG880F256G-E-QFP100R
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EFM32LG880F256G-E-QFP100 Tỷ lệ tối đa & tính chất điện
| Core Architecture | ARM Cortex-M3 32-bit |
| Family | EFM32 Leopard Gecko (EFM32LG) |
| CPU Clock Speed | 48 MHz max |
| Program Flash | 256 kB |
| SRAM | 32 kB |
| Operating Voltage (Vdd) | 1.98 V to 3.8 V |
| Digital I/O Pins | 86 |
| ADC | 12-bit |
| Timers | 4 x 16-bit |
| LCD Controller | Integrated segmented, up to 8x36 segments |
| Active Current (Run Mode) | 211 uA/MHz |
| Sleep Current (Stop Mode) | 0.65 uA |
| Crypto Accelerator | AES-128 hardware |
| Hộp | 100-LQFP (14x14 mm) |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant |
Cấu hình chân EFM32LG880F256G-E-QFP100
| Chân 1 | PD0 — GPIO / I2C0 SDA |
| Chân 2 | PD1 — GPIO / I2C0 SCL |
| Chân 3 | PD2 — GPIO / ADC0 ch2 |
| Chân 4 | PD3 — GPIO / ADC0 ch3 |
| Chân 5 | VDD — Digital supply voltage |
| Chân 6 | VSS — Digital ground |
| Chân 7 | PD4 — GPIO / LEUART0 TX |
| Chân 8 | PD5 — GPIO / LEUART0 RX |
| Chân 9 | PD6 — GPIO / TIMER0 CC0 |
| Chân 10 | PD7 — GPIO / TIMER0 CC1 |
| Chân 11 | PD8 — GPIO / TIMER0 CC2 |
| Chân 12 | PD9 — GPIO / ACMP0 input |
| Chân 13 | PD10 — GPIO / ACMP1 input |
| Chân 14 | PD11 — GPIO / I2C1 SDA |
| Chân 15 | PD12 — GPIO / I2C1 SCL |
| Chân 16 | PD13 — GPIO |
| Chân 17 | PD14 — GPIO |
| Chân 18 | PD15 — GPIO |
| Chân 19 | PA0 — GPIO / USART0 CTS |
| Chân 20 | PA1 — GPIO / USART0 RTS |
| Chân 21 | PA2 — GPIO / USART0 RX |
| Chân 22 | PA3 — GPIO / USART0 TX |
| Chân 23 | PA4 — GPIO / TIMER1 CC0 |
| Chân 24 | PA5 — GPIO / TIMER1 CC1 |
| Chân 25 | PA6 — GPIO / TIMER1 CC2 |
| Chân 26 | PA7 — GPIO |
| Chân 27 | PA8 — GPIO / LESENSE ch0 |
| Chân 28 | PA9 — GPIO / LESENSE ch1 |
| Chân 29 | PA10 — GPIO / LESENSE ch2 |
| Chân 30 | PA11 — GPIO / LESENSE ch3 |
| Chân 31 | PA12 — GPIO / LESENSE ch4 |
| Chân 32 | PA13 — GPIO / LESENSE ch5 |
| Chân 33 | PA14 — GPIO / LESENSE ch6 |
| Chân 34 | PA15 — GPIO / LESENSE ch7 |
| Chân 35 | PB0 — GPIO / LCD segment |
| Chân 36 | PB1 — GPIO / LCD segment |
| Chân 37 | PB2 — GPIO / LCD segment |
| Chân 38 | PB3 — GPIO / LCD segment |
| Chân 39 | PB4 — GPIO / LCD segment |
| Chân 40 | PB5 — GPIO / LCD segment |
| Chân 41 | PB6 — GPIO / LCD segment |
| Chân 42 | PB7 — GPIO / LCD segment |
| Chân 43 | PB8 — GPIO / LCD segment |
| Chân 44 | PB9 — GPIO / LCD segment |
| Chân 45 | PB10 — GPIO / LCD segment |
| Chân 46 | PB11 — GPIO / LCD segment |
| Chân 47 | PB12 — GPIO / LCD segment |
| Chân 48 | PB13 — GPIO / LCD segment |
| Chân 49 | PB14 — GPIO / LCD segment |
| Chân 50 | PB15 — GPIO / LCD segment |
| Chân 51 | PC0 — GPIO / LCD segment |
| Chân 52 | PC1 — GPIO / LCD segment |
| Chân 53 | PC2 — GPIO / LCD segment |
| Chân 54 | PC3 — GPIO / LCD segment |
| Chân 55 | PC4 — GPIO / LCD segment |
| Chân 56 | PC5 — GPIO / LCD segment |
| Chân 57 | PC6 — GPIO / LCD segment |
| Chân 58 | PC7 — GPIO / LCD segment |
| Chân 59 | PC8 — GPIO / LCD common |
| Chân 60 | PC9 — GPIO / LCD common |
| Chân 61 | PC10 — GPIO / LCD common |
| Chân 62 | PC11 — GPIO / LCD common |
| Chân 63 | PC12 — GPIO / LCD common |
| Chân 64 | PC13 — GPIO / LCD common |
| Chân 65 | PC14 — GPIO / LCD common |
| Chân 66 | PC15 — GPIO / LCD common |
| Chân 67 | VDD — Digital supply voltage |
| Chân 68 | VSS — Digital ground |
| Chân 69 | PE0 — GPIO / USART1 RX |
| Chân 70 | PE1 — GPIO / USART1 TX |
| Chân 71 | PE2 — GPIO / USART2 RX |
| Chân 72 | PE3 — GPIO / USART2 TX |
| Chân 73 | PE4 — GPIO / TIMER2 CC0 |
| Chân 74 | PE5 — GPIO / TIMER2 CC1 |
| Chân 75 | PE6 — GPIO / TIMER2 CC2 |
| Chân 76 | PE7 — GPIO |
| Chân 77 | PE8 — GPIO / ADC1 ch8 |
| Chân 78 | PE9 — GPIO / ADC1 ch9 |
| Chân 79 | PE10 — GPIO / ADC1 ch10 |
| Chân 80 | PE11 — GPIO / ADC1 ch11 |
| Chân 81 | PE12 — GPIO / DAC0 output |
| Chân 82 | PE13 — GPIO |
| Chân 83 | PE14 — GPIO |
| Chân 84 | PE15 — GPIO |
| Chân 85 | PF0 — GPIO / TIMER3 CC0 |
| Chân 86 | PF1 — GPIO / TIMER3 CC1 |
| Chân 87 | PF2 — GPIO / TIMER3 CC2 |
| Chân 88 | PF3 — GPIO / ACMP2 input |
| Chân 89 | PF4 — GPIO / ACMP3 input |
| Chân 90 | PF5 — GPIO / LESENSE ch8 |
| Chân 91 | PF6 — GPIO / LESENSE ch9 |
| Chân 92 | PF7 — GPIO / LESENSE ch10 |
| Chân 93 | PF8 — GPIO / LESENSE ch11 |
| Chân 94 | PF9 — GPIO / LESENSE ch12 |
| Chân 95 | PF10 — GPIO / LESENSE ch13 |
| Chân 96 | PF11 — GPIO / LESENSE ch14 |
| Chân 97 | PF12 — GPIO / LESENSE ch15 |
| Chân 98 | PF13 — GPIO / DEBUG SWDIO |
| Chân 99 | PF14 — GPIO / DEBUG SWCLK |
| Chân 100 | RESETn — Reset input, active low |
Ứng dụng tiêu biểu
EFM32LG880F256G-E-QFP100 phù hợp cho 6 Áp dụngs: Battery-Powered Smart Thermostat, Wearable Fitness Band, Electronic Shelf Label (ESL), Industrial HMI Panel, Portable Medical Monitor, Smart E-Meter / Utility Display.
Battery-Powered Smart Thermostat
The EFM32LG880F256G-E-QFP100 fits smart-thermostat designs because its 0.65 uA Stop-mode current lets the device sleep almost indefinitely between user interactions, while the 48 MHz Cortex-M3 core wakes instantly to drive the segmented LCD for temperature and humidity readouts. Placed as the main controller connected to a temperature/humidity sensor over I2C and a low-power segmented glass display, it delivers years of battery life on two AA cells. The 256 kB flash holds the HVAC control logic plus a BLE stack for app pairing. Unlike a generic Cortex-M0 MCU it adds the integrated LCD controller that eliminates a separate driver IC, reducing BOM cost and quiescent current.
Được đề xuất
Wearable Fitness Band
The EFM32LG880F256G-E-QFP100 is ideal for wearable fitness applications because its 211 uA/MHz active current and 0.65 uA Stop current combine with autonomous sensor polling (LETIMER + LESENSE) to give multi-day battery life on a 100 mAh LiPo. The 12-bit ADC handles PPG heart-rate sensor readout directly without an external AFE, and the integrated 8x36-segment LCD controller drives the band's status display in deep-sleep at sub-1 uA total. Hardware AES-128 secures BLE pairing and stored biometrics. Placed as the main MCU between the PPG sensor, BLE radio, and segmented display, it removes the need for a separate display driver IC.
Được đề xuất
Electronic Shelf Label (ESL)
The EFM32LG880F256G-E-QFP100 fits electronic shelf labels because its deep-sleep current of 0.65 uA and integrated segmented LCD controller allow a coin-cell-powered price tag to operate for 5-10 years without battery replacement. The Cortex-M3 core at 48 MHz handles proprietary 2.4 GHz or NFC-based updates of price/description, while the AES-128 hardware accelerator authenticates updates. Placed on the ESL module with a small segmented glass display, it eliminates the typical external charge-pump circuitry. The 256 kB flash stores localized text strings and pricing logic, and 86 GPIO drive larger 7-segment panels.
Được đề xuất
Industrial HMI Panel
The EFM32LG880F256G-E-QFP100 suits industrial HMI panels because its 86 GPIO drive key-matrix inputs, status LEDs, and a multi-line segmented LCD, all without external driver ICs. The 100-LQFP package exposes sufficient I/O for a 6x6 button matrix plus dedicated pins for rotary encoders. The 12-bit ADC reads front-panel trim pots and analog sensor signals, while the 1.98 V to 3.8 V supply range allows direct 3.3 V rail operation. Placed as the front-panel MCU communicating with a host controller over UART or SPI, it cuts BOM cost and standby power compared with a Cortex-M4 design.
Được đề xuất
Portable Medical Monitor
The EFM32LG880F256G-E-QFP100 is well matched to portable medical monitors because its 12-bit ADC captures pulse oximetry and temperature sensor data with adequate ENOB for SpO2 trending, while the integrated segmented LCD displays readings without an external driver. The hardware AES-128 secures patient data transmission to a host device, meeting HIPAA-grade device expectations. Placed as the main MCU with a Li-coin cell, the 0.65 uA Stop current delivers months of standby life. The 256 kB flash accommodates firmware for sensor fusion, BLE pairing, and onboard storage of recent readings.
Được đề xuất
Smart E-Meter / Utility Display
The EFM32LG880F256G-E-QFP100 fits electronic meters and utility display applications because its integrated 8x36-segment LCD controller drives a multi-digit glass display directly, while autonomous energy-monitoring peripherals allow continuous metrology without waking the CPU. The 12-bit ADC handles voltage and current sensing for single-phase metering, and the 86 GPIO support tamper-detection switches and optical interfaces. Placed as the metrology MCU with an isolated shunt, the Cortex-M3 runs the metrology algorithm at 48 MHz while Stop mode consumes only 0.65 uA, extending battery-backed operation across power outages.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EFM32LG880F256G-E-QFP100 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EFM32LG880F256G-F-QFP100 | EFM32LG880F128G-E-QFP100 | EFM32LG880F64G-E-QFP100 |
|---|---|---|---|---|
| Package | 100-LQFP (14x14) | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Max Clock Speed | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash | 256 kB | 256 kB | 128 kB (-50%) | 64 kB (-75%) |
| SRAM | 32 kB | 32 kB | 32 kB | 32 kB |
| Stop-Mode Current | 0.65 uA | 0.65 uA | 0.65 uA | 0.65 uA |
| GPIO Count | 86 | 86 | 86 | 86 |
| LCD Controller | Integrated 8x36 | Integrated 8x36 | Integrated 8x36 | Integrated 8x36 |
| Supply Voltage | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
Bảo phân biệt quan trọng
- Lowest Stop-mode current in the 100-LQFP Cortex-M3 class (vsSTM32L152VCT6)
- Integrated 8x36-segment LCD controller on-chip (vsEFM32LG842F256G-F-QFP64)
- 256 kB flash matches entire 100-LQFP Leopard Gecko family (vsEFM32LG880F128G-E-QFP100)
Ghi chú thiết kế
Estimated: at 48 MHz active CPU the EFM32LG880F256G draws ~10 mA core current. With 3.3 V supply, power dissipation is ~33 mW - the LQFP-100 thermal resistance of ~50 C/W yields a junction rise of only ~1.6 C, so no heatsink is required. However, in active modes the dominant power consumer is the analog subsystem and the LCD bias; place a 1 uF ceramic decoupling capacitor within 5 mm of each VDD/VSS pair and a bulk 10 uF on the regulator output to prevent inrush sag during LCD refresh.
The LQFP-100 package has a junction-to-ambient thermal resistance of approximately 50 C/W on a 2-layer JEDEC test board. Estimated: even at 48 MHz active current of 10 mA from a 3.8 V supply (worst-case Vdd) the dissipation is 38 mW, leading to ~1.9 C rise - well within the 125 C junction limit. For designs using full GPIO drive strength, derate by 0.7-1.0 for simultaneous high-current pin switching.
Route the SWD debug pins (PF13 SWDIO, PF14 SWCLK) as a 10 cm or less length-matched pair with a ground trace between them; place a 4.7 kohm pull-up on SWDIO per ARM CoreSight recommendations. Keep the RESETn trace short and provide a 100 kohm pull-up plus 1 nF-to-ground for noise immunity. The integrated LCD controller drives 4 common and 8 segment pins - keep LCD traces short and isolated from switching signals to avoid display artifacts.
Common pitfalls when using the EFM32LG880F256G: (1) failing to enable the peripheral clock before configuring GPIO alternate functions - registers silently retain previous state; (2) using EM2/EM3 sleep modes without retaining GPIO state - some pins will revert to analog input, increasing leakage; (3) overlooking the 1.98 V minimum supply when designing for 1.8 V rails - use the EFM32LG880F256G-E variant only with rails >= 1.98 V. Always validate Stop-mode current with a uA-range multimeter on a finalized board, not the dev kit.
Thông tin tuân thủ
RoHS compliant per Silicon Labs product page; lead-free reflow profile per JEDEC J-STD-020. AEC-Q100 qualification not documented for this part - choose automotive-grade EFM32 variants for AEC-Q100 compliance.
