EFM32TG825F16-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG825F16-D-BGA48 ✓ Hoạt độngEFM32TG825F16-D-BGA48 Tóm tắt
An EFM32TG microcontroller belongs to the ARM Cortex-M3 > 32-bit microcontroller > embedded processor > semiconductor hierarchy. Unlike a general-purpose application processor, this device is designed around deterministic peripheral operation and rapid wake-up from energy-saving modes. The EFM32TG family is intended for portable sensors, industrial controllers, connected accessories, and other systems where average power consumption matters as much as processing performance.
The EFM32TG825F16-D-BGA48 provides 16 KB of program flash and 4 KB of SRAM, runs at up to 32 MHz, and supports a 1.85 V to 3.8 V operating supply range according to its component listing. Its Tiny Gecko architecture includes autonomous peripheral operation, high analog integration, and a low-power Stop mode that consumes as little as 0.6 uA. Run-mode consumption is listed as 150 uA/MHz, which is useful for estimating battery life during duty-cycled operation.
The MCU's architecture allows peripherals to handle timing, conversions, and data movement with limited processor intervention. This reduces the number of active CPU cycles required for common control tasks. Fast wake-up behavior also improves responsiveness in systems that spend most of their time in deep sleep and periodically collect sensor data or communicate with a host.
Typical uses include wearable health monitors, low-power wireless sensor nodes, industrial condition-monitoring devices, compact control modules, and battery-powered IoT equipment. The 48-BGA 4 x 4 mm package supports dense board layouts, although its fine-pitch construction requires careful inspection, solder-paste control, and reliable assembly processes.
When designing the PCB, follow the package drawing, land pattern, and recommended decoupling layout in the manufacturer datasheet. Provide local supply bypassing at the power pins and reserve programming and debug access before routing the compact board. Check assembly capability for 48-BGA components and confirm the exact package variant against the ordering information.
This page combines manufacturer specifications, package and memory details, application guidance, and a structured comparison with other EFM32TG devices. It is intended to help engineers evaluate firmware resources, low-power behavior, assembly requirements, and family alternatives without relying on a single short device summary.
Bộ thay thế dễ dàng lắp đặt cho EFM32TG825F16-D-BGA48 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EFM32TG825F16-D-BGA48 (cùng hình factor và footprint) — khác nhau ở Flash Memory, Package, RAM, Supply Voltage Range, Architecture.
EFM32TG225F16-BGA48
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EFM32TG225F8-D-BGA48R
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EFM32TG225F32-BGA48T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EFM32TG825F16-D-BGA48 Tỷ lệ tối đa & tính chất điện
| Series | EFM32 Tiny Gecko |
| Processor Core | ARM Cortex-M3, 32-bit |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 16 KB (16K x 8) |
| RAM | 4 KB |
| Core Architecture | Single-core |
| Điện áp cung cấp hoạt động | 1.85 V to 3.8 V |
| Hộp | 48-BGA (4 x 4 mm) |
| Kiểu lắp đặt | Surface Mount |
| Low-Power Stop Mode Current | 0.6 uA |
| Run Mode Current | 150 uA/MHz |
| Wake-Up Behavior | Fast wake-up from energy-saving modes |
| Peripheral Architecture | Autonomous peripherals with high analog integration |
| Trạng thái RoHS | RoHS Compliant |
Hướng dẫn cấu hình chân EFM32TG825F16-D-BGA48 48-bga (4 x 4 mm)
Cấu hình chân cho EFM32TG825F16-D-BGA48 (48-bga (4 x 4 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EFM32TG825F16-D-BGA48.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EFM32TG825F16-D-BGA48 phù hợp cho 6 Áp dụngs: Battery-Powered Wireless Sensor Node, Industrial Condition Monitoring, Wearable Health and Fitness Tracker, Smart Home Sensor Hub, Connected Lighting Controller, Compact Data Acquisition Module.
Battery-Powered Wireless Sensor Node
The EFM32TG825F16-D-BGA48 fits compact wireless sensor nodes that periodically sample environmental or motion data and transmit short packets. Its 32 MHz Cortex-M3 core handles protocol processing, while autonomous peripherals and fast wake-up behavior reduce the time the processor must remain active. The family is listed at 150 uA/MHz in Run mode and down to 0.6 uA in Stop mode, allowing duty-cycled operation with a measurable battery-life benefit. The compact 48-BGA 4 x 4 mm package also preserves board area for a radio, sensor, and antenna. Firmware size should be checked against the 16 KB flash limit, including bootloader and radio-library overhead.
Được đề xuất
Industrial Condition Monitoring
The EFM32TG825F16-D-BGA48 is suitable for industrial monitoring modules that periodically read sensors and record vibration, temperature, or equipment status. Its 32-bit Cortex-M3 processor provides more headroom than an 8-bit controller, while autonomous peripheral operation can reduce processor intervention during routine data acquisition. Low-power Stop-mode entry helps devices spend most of their deployment interval in a low-energy state. The 1.85 V to 3.8 V operating range supports 3 V industrial sensor architectures. Confirm the device temperature grade and required interface pins against the production environmental specification before release.
Được đề xuất
Wearable Health and Fitness Tracker
The EFM32TG825F16-D-BGA48 can serve as the low-power controller in a wearable activity tracker or portable health sensor. Its fast wake-up from energy-saving modes supports immediate sampling when motion or physiological events are detected, while the 0.6 uA Stop-mode figure helps preserve battery capacity between events. The 48-BGA 4 x 4 mm package supports dense wrist-worn layouts, and the 4 KB RAM is adequate for compact buffering when final algorithms run on a companion device. Designers should reserve programming access and validate BGA assembly yield before high-volume production.
Được đề xuất
Smart Home Sensor Hub
The EFM32TG825F16-D-BGA48 fits compact smart-home sensor hubs that combine several low-power inputs with a local serial interface. Its 32 MHz Cortex-M3 core can manage protocol conversion, device filtering, and configuration updates, while the 16 KB flash provides space for a compact embedded application. Low-power operating modes are valuable in always-installed room sensors that spend most of their service life idle. The BGA package reduces footprint in wall-mounted products, although its fine pitch requires careful paste deposition and inspection. Validate the final pin assignment against the manufacturer package drawing before committing the PCB.
Được đề xuất
Connected Lighting Controller
The EFM32TG825F16-D-BGA48 can control compact connected lighting modules that need local dimming, button handling, and serial communications. Its 32-bit Cortex-M3 core supports responsive state-machine control, and the autonomous peripherals reduce CPU involvement in timing and I/O handling. Low-power stop behavior is useful in luminaires that must satisfy standby-energy targets while remaining responsive to a network command. The 48-BGA package is appropriate for densely populated LED driver boards, but the lighting-specific safety and isolation requirements must be handled separately from the MCU supply domain.
Được đề xuất
Compact Data Acquisition Module
The EFM32TG825F16-D-BGA48 is appropriate for small data-acquisition modules that periodically measure analog or digital inputs and transfer summarized results. The 32-bit Cortex-M3 core supports efficient filtering and data preparation, while autonomous peripherals improve responsiveness without continuous processor polling. Its 1.85 V to 3.8 V operating range supports 3 V systems and low-voltage sensor chains. Because the device offers 16 KB of flash and 4 KB of RAM, buffering strategies should avoid retaining large sample arrays. Pairing it with a dedicated external ADC can provide greater resolution and channel count.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EFM32TG825F16-D-BGA48 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EFM32TG225F16-BGA48 | EFM32TG225F8-D-BGA48R | EFM32TG225F32-BGA48T |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) - same | 48-BGA (4 x 4 mm) - same | 48-BGA (4 x 4 mm) - same |
| Processor Core | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 |
| Maximum Clock Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 16 KB - same | 8 KB (-50%) | 32 KB (+100%) |
| Series | EFM32 Tiny Gecko | EFM32 Tiny Gecko | EFM32 Tiny Gecko | EFM32 Tiny Gecko |
Bảo phân biệt quan trọng
- Same 16 KB flash configuration in the closest family alternative (vsEFM32TG225F16-BGA48)
- More memory headroom in the larger flash alternative (vsEFM32TG225F32-BGA48T)
- Low-power operation remains suitable for compact sensor products (vsEFM32TG225F8-D-BGA48R)
Ghi chú thiết kế
Use the 48-BGA land pattern, ball map, and recommended via arrangement from the manufacturer package drawing rather than adapting a generic BGA footprint. Confirm the board fabs 48-BGA assembly capability, solder-paste stencil aperture sizes, and inspection coverage for the 4 x 4 mm device. Provide a stable ground plane beneath the package and route sensitive analog inputs away from switching nodes and high-current traces.
The EFM32TG family can enter Stop mode at currents as low as 0.6 uA, but board-level leakage may dominate a design that spends long periods asleep. Check leakage from pull-up resistors, sensors, level shifters, and protection devices. Use the 1.85 V to 3.8 V device operating range to select the regulator and verify that the minimum operating voltage remains valid during battery discharge or dynamic supply transitions.
Do not treat every EFM32TG 48-BGA variant as an automatic substitute. Confirm flash density, SRAM, supply limits, temperature grade, peripheral availability, and each package-ball function against the manufacturer datasheets. The 16 KB flash on this device leaves limited room for a bootloader, application code, and field updates, so verify the linked binary size and reserve update space before production release.
Thông tin tuân thủ
RoHS compliance is indicated by the distributor category information. The automotive, lead-free, halogen-free, REACH, and conflict-minerals statuses were not confirmed for this exact ordering code.