Silicon Labs

EFM32TG825F16-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs

料号: EFM32TG825F16-D-BGA48 ✓ 量产中
1.85 V to 3.8 V Vdss 0.6 uA Id 48-BGA (4 x 4 mm) Package 32 MHz Speed 16 KB (16K x 8) Memory
最小起订量: 1 |

EFM32TG825F16-D-BGA48 概述

The Silicon Labs EFM32TG825F16-D-BGA48 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating at 32 MHz with 16 KB of flash memory and 4 KB of RAM in a 48-BGA 4 x 4 mm package. It combines an energy-efficient Cortex-M3 core with low-power sleep modes, autonomous peripherals, and integrated analog and communication resources for battery-powered and embedded systems.

An EFM32TG microcontroller belongs to the ARM Cortex-M3 > 32-bit microcontroller > embedded processor > semiconductor hierarchy. Unlike a general-purpose application processor, this device is designed around deterministic peripheral operation and rapid wake-up from energy-saving modes. The EFM32TG family is intended for portable sensors, industrial controllers, connected accessories, and other systems where average power consumption matters as much as processing performance.

The EFM32TG825F16-D-BGA48 provides 16 KB of program flash and 4 KB of SRAM, runs at up to 32 MHz, and supports a 1.85 V to 3.8 V operating supply range according to its component listing. Its Tiny Gecko architecture includes autonomous peripheral operation, high analog integration, and a low-power Stop mode that consumes as little as 0.6 uA. Run-mode consumption is listed as 150 uA/MHz, which is useful for estimating battery life during duty-cycled operation.

The MCU's architecture allows peripherals to handle timing, conversions, and data movement with limited processor intervention. This reduces the number of active CPU cycles required for common control tasks. Fast wake-up behavior also improves responsiveness in systems that spend most of their time in deep sleep and periodically collect sensor data or communicate with a host.

Typical uses include wearable health monitors, low-power wireless sensor nodes, industrial condition-monitoring devices, compact control modules, and battery-powered IoT equipment. The 48-BGA 4 x 4 mm package supports dense board layouts, although its fine-pitch construction requires careful inspection, solder-paste control, and reliable assembly processes.

When designing the PCB, follow the package drawing, land pattern, and recommended decoupling layout in the manufacturer datasheet. Provide local supply bypassing at the power pins and reserve programming and debug access before routing the compact board. Check assembly capability for 48-BGA components and confirm the exact package variant against the ordering information.

This page combines manufacturer specifications, package and memory details, application guidance, and a structured comparison with other EFM32TG devices. It is intended to help engineers evaluate firmware resources, low-power behavior, assembly requirements, and family alternatives without relying on a single short device summary.

直接替换替代料: EFM32TG825F16-D-BGA48 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: EFM32TG825F16-D-BGA48 (相同外形与封装尺寸) ——差异在于 Flash Memory, Package, RAM, Supply Voltage Range, Architecture.

Silicon Labs
Flash Memory: 16 KB (16K x 8 bits)
Supply Voltage Range: 1.85 V to 3.8 V
Architecture: 32-bit
对比 EFM32TG825F16-D-BGA48 →
Silicon Labs
Flash Memory: 8 KB (8K x 8)
RAM: 2 KB (2K x 8)
Supply Voltage Range: 1.98 V to 3.8 V
对比 EFM32TG825F16-D-BGA48 →
Silicon Labs
Package: 48-BGA (4 mm x 4 mm)
Supply Voltage Range: 1.85 V to 3.8 V
Architecture: 32-bit single-core
对比 EFM32TG825F16-D-BGA48 →

EFM32TG225F16-BGA48

✅ 直接替换
Silicon Labs
📦 48-BGA (4 x 4 mm)
32-bit ARM Cortex-M3 microcontroller · Tiny Gecko · ARM Cortex-M3 · 32-bit · 32 MHz · 16 KB (16K x 8 bits) · 1.85 V to 3.8 V · 2.5 V or 3.3 V

联系询价

查看数据手册 →

EFM32TG225F8-D-BGA48R

✅ 直接替换
Silicon Labs
📦 48-BGA (4 x 4 mm)
32-bit ARM Cortex-M3 Microcontroller · EFM32 Tiny Gecko · 32 MHz · 8 KB (8K x 8) · 2 KB (2K x 8) · ARM Cortex-M3, 32-bit single-core · 1.98 V to 3.8 V · 48-BGA (4 x 4 mm)

联系询价

查看数据手册 →

EFM32TG225F32-BGA48T

✅ 直接替换
📦 48-BGA (4 x 4 mm)
Same EFM32TG family, Cortex-M3 core, and 48-BGA footprint, but 32 KB flash is 100% above the target 16 KB; confirm pin assignments

📋 参考替代料(不在目录中)

EFM32TG825F16-D-BGA48 最大额定值与电气特性

Series EFM32 Tiny Gecko
Processor Core ARM Cortex-M3, 32-bit
Maximum Clock Speed 32 MHz
Flash Memory 16 KB (16K x 8)
RAM 4 KB
Core Architecture Single-core
工作电源电压 1.85 V to 3.8 V
封装 48-BGA (4 x 4 mm)
安装类型 Surface Mount
Low-Power Stop Mode Current 0.6 uA
Run Mode Current 150 uA/MHz
Wake-Up Behavior Fast wake-up from energy-saving modes
Peripheral Architecture Autonomous peripherals with high analog integration
RoHS 状态 RoHS Compliant

EFM32TG825F16-D-BGA48 48-bga (4 x 4 mm) 引脚配置指南

EFM32TG825F16-D-BGA48(48-bga (4 x 4 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

EFM32TG825F16-D-BGA48 的 48-bga (4 x 4 mm) 封装引脚图

暂无详细引脚数据: EFM32TG825F16-D-BGA48.

请参阅 数据手册 以查看完整引脚配置。

典型应用

EFM32TG825F16-D-BGA48 适用于 6 应用s: Battery-Powered Wireless Sensor Node, Industrial Condition Monitoring, Wearable Health and Fitness Tracker, Smart Home Sensor Hub, Connected Lighting Controller, Compact Data Acquisition Module.

🧩

Battery-Powered Wireless Sensor Node

The EFM32TG825F16-D-BGA48 fits compact wireless sensor nodes that periodically sample environmental or motion data and transmit short packets. Its 32 MHz Cortex-M3 core handles protocol processing, while autonomous peripherals and fast wake-up behavior reduce the time the processor must remain active. The family is listed at 150 uA/MHz in Run mode and down to 0.6 uA in Stop mode, allowing duty-cycled operation with a measurable battery-life benefit. The compact 48-BGA 4 x 4 mm package also preserves board area for a radio, sensor, and antenna. Firmware size should be checked against the 16 KB flash limit, including bootloader and radio-library overhead.

🏭

Industrial Condition Monitoring

The EFM32TG825F16-D-BGA48 is suitable for industrial monitoring modules that periodically read sensors and record vibration, temperature, or equipment status. Its 32-bit Cortex-M3 processor provides more headroom than an 8-bit controller, while autonomous peripheral operation can reduce processor intervention during routine data acquisition. Low-power Stop-mode entry helps devices spend most of their deployment interval in a low-energy state. The 1.85 V to 3.8 V operating range supports 3 V industrial sensor architectures. Confirm the device temperature grade and required interface pins against the production environmental specification before release.

💊

Wearable Health and Fitness Tracker

The EFM32TG825F16-D-BGA48 can serve as the low-power controller in a wearable activity tracker or portable health sensor. Its fast wake-up from energy-saving modes supports immediate sampling when motion or physiological events are detected, while the 0.6 uA Stop-mode figure helps preserve battery capacity between events. The 48-BGA 4 x 4 mm package supports dense wrist-worn layouts, and the 4 KB RAM is adequate for compact buffering when final algorithms run on a companion device. Designers should reserve programming access and validate BGA assembly yield before high-volume production.

🏠

Smart Home Sensor Hub

The EFM32TG825F16-D-BGA48 fits compact smart-home sensor hubs that combine several low-power inputs with a local serial interface. Its 32 MHz Cortex-M3 core can manage protocol conversion, device filtering, and configuration updates, while the 16 KB flash provides space for a compact embedded application. Low-power operating modes are valuable in always-installed room sensors that spend most of their service life idle. The BGA package reduces footprint in wall-mounted products, although its fine pitch requires careful paste deposition and inspection. Validate the final pin assignment against the manufacturer package drawing before committing the PCB.

💡

Connected Lighting Controller

The EFM32TG825F16-D-BGA48 can control compact connected lighting modules that need local dimming, button handling, and serial communications. Its 32-bit Cortex-M3 core supports responsive state-machine control, and the autonomous peripherals reduce CPU involvement in timing and I/O handling. Low-power stop behavior is useful in luminaires that must satisfy standby-energy targets while remaining responsive to a network command. The 48-BGA package is appropriate for densely populated LED driver boards, but the lighting-specific safety and isolation requirements must be handled separately from the MCU supply domain.

🔧

Compact Data Acquisition Module

The EFM32TG825F16-D-BGA48 is appropriate for small data-acquisition modules that periodically measure analog or digital inputs and transfer summarized results. The 32-bit Cortex-M3 core supports efficient filtering and data preparation, while autonomous peripherals improve responsiveness without continuous processor polling. Its 1.85 V to 3.8 V operating range supports 3 V systems and low-voltage sensor chains. Because the device offers 16 KB of flash and 4 KB of RAM, buffering strategies should avoid retaining large sample arrays. Pairing it with a dedicated external ADC can provide greater resolution and channel count.

What is the EFM32TG825F16-D-BGA48?
The EFM32TG825F16-D-BGA48 is a Silicon Labs 32-bit ARM Cortex-M3 Tiny Gecko microcontroller rated for operation up to 32 MHz. It includes 16 KB of flash memory and 4 KB of RAM in a 48-BGA 4 x 4 mm package. According to the Silicon Labs EFM32TG datasheet, the family combines autonomous peripherals, high analog integration, and low-power operation for embedded and battery-powered products.
What are the key specifications of EFM32TG825F16-D-BGA48?
The principal specifications of the EFM32TG825F16-D-BGA48 are a 32 MHz ARM Cortex-M3 core, 16 KB of flash, 4 KB of SRAM, a 1.85 V to 3.8 V supply range, and a 48-BGA 4 x 4 mm package. The EFM32TG family also provides autonomous peripheral operation and Stop-mode current down to 0.6 uA, making it suitable for compact, duty-cycled embedded designs.
Where can I download the EFM32TG825F16-D-BGA48 datasheet PDF?
The official EFM32TG825F16-D-BGA48 datasheet is available from Silicon Labs as the EFM32TG data sheet at silabs.com/documents/public/data-sheets/efm32tg-datasheet.pdf. It contains the device pin descriptions, electrical characteristics, memory map, power-management information, and package drawings. The 48-BGA land pattern and pin assignments should always be taken from the manufacturer documentation.
Where can I find the EFM32TG825F16-D-BGA48 pinout?
The EFM32TG825F16-D-BGA48 pinout, including the 48 package balls, power connections, ground balls, and peripheral functions, is shown in the Silicon Labs EFM32TG datasheet. Use the package drawing and pin-description table to assign PCB nets, particularly for the fine-pitch 4 x 4 mm BGA. Keep programming and debug test points accessible during board layout.
How much power does the EFM32TG825F16-D-BGA48 consume?
The EFM32TG family is specified as low power, with Stop-mode consumption as low as 0.6 uA and Run-mode consumption of 150 uA/MHz. These figures make duty-cycled operation practical because the controller can remain in a low-energy state between sensor readings or communication events. Actual system consumption also depends on supply voltage, peripheral activity, flash execution time, and the external circuit load.
Is the EFM32TG825F16-D-BGA48 suitable for battery-powered IoT devices?
Yes, the EFM32TG825F16-D-BGA48 is well suited to battery-powered IoT equipment because it combines a 32 MHz Cortex-M3 core with low-power sleep modes and Stop-mode current down to 0.6 uA. Its autonomous peripherals can perform routine timing and data-handling tasks with reduced processor activity. The 16 KB flash capacity should be checked carefully against firmware size, bootloader requirements, and OTA update space.
Can EFM32TG825F16-D-BGA48 replace EFM32TG225F16-BGA48?
The EFM32TG825F16-D-BGA48 and EFM32TG225F16-BGA48 share the EFM32TG family, 48-BGA 4 x 4 mm package format, 16 KB flash configuration, and 32-bit Cortex-M3 architecture. Their peripheral sets and exact pin assignments must still be compared against the manufacturer datasheets before substitution. Firmware peripheral configuration, memory size, and package ball functions determine whether the replacement is drop-in for a specific board.
What is the best drop-in replacement for EFM32TG825F16-D-BGA48?
The closest drop-in candidates are other EFM32TG devices with the same 48-BGA 4 x 4 mm footprint, Cortex-M3 core, and matching flash configuration. Confirm the pin-description table, supply range, memory map, and peripheral assignments for each candidate before treating it as a drop-in replacement. A different flash density or an altered peripheral pinout can require firmware and PCB changes even when the package dimensions match.
Is EFM32TG825F16-D-BGA48 the same as EFM32TG825F16-D-BGA48R?
The EFM32TG825F16-D-BGA48R identifies the same Silicon Labs device configuration supplied in a reel-oriented ordering format, while EFM32TG825F16-D-BGA48 is the non-reel ordering designation. Confirm the orderable part number, shipping format, and marking scheme with the manufacturer before releasing a production BOM. The electrical and functional configuration is expected to be the same.
When should I choose EFM32TG825F16-D-BGA48 over a larger EFM32TG225 device?
Choose the EFM32TG825F16-D-BGA48 when its 16 KB flash and 4 KB RAM provide enough code and working space and the required peripherals are available in its pin configuration. A larger EFM32TG225 device is preferable when the application needs more memory, additional interface resources, or a wider feature set. The final choice must be based on RAM margin, firmware growth, pin availability, and the exact peripheral set.
Is EFM32TG825F16-D-BGA48 suitable for industrial control applications?
The EFM32TG825F16-D-BGA48 can be used in compact industrial control systems that need a 32-bit core, deterministic peripheral handling, and low-power operation. Its 1.85 V to 3.8 V supply range and 48-BGA footprint suit dense control boards. Industrial suitability must also be checked against the required temperature grade, isolation needs, long-term availability, and peripheral requirements.
What is the lead time for EFM32TG825F16-D-BGA48?
Current production lead time and available quantity should be confirmed through the Request a Quote form on this page. The form lets the supply team verify the exact orderable MPN, package, quantity, and current schedule. Because EFM32TG variants differ in flash size, temperature grade, and shipping format, always quote the complete EFM32TG825F16-D-BGA48 designation.
Where can I buy EFM32TG825F16-D-BGA48 online?
Use the Request a Quote form on this page to request the EFM32TG825F16-D-BGA48, including quantity, target date, and shipment requirements. The form is the direct route for a quotation and stock confirmation for this exact 48-BGA ordering code. Verify that the quotation identifies the same flash density, package, and device suffix shown on this page.
Is EFM32TG825F16-D-BGA48 in stock?
Inventory changes by order quantity, date, and package variant, so current stock should be confirmed through the Request a Quote form on this page. Include your production forecast and target delivery date to obtain an accurate allocation response. The exact ordering code EFM32TG825F16-D-BGA48 should be stated on the request to avoid substitution with a different suffix.
What can replace the EFM32TG825F16-D-BGA48 in an existing design?
A replacement should be selected from 48-BGA 4 x 4 mm EFM32TG devices with a Cortex-M3 core, at least 16 KB flash, and compatible supply, memory, and peripheral pin assignments. EFM32TG225 variants are useful candidates when their pin descriptions match the board. Validate the candidate against the manufacturer datasheets and confirm firmware behavior, because package similarity alone does not guarantee a drop-in replacement.

工程参考数据: EFM32TG825F16-D-BGA48 ——对比、设计指导和合规信息。

选型指南

Select the EFM32TG825F16-D-BGA48 when the design specifically requires a 48-BGA 4 x 4 mm EFM32TG device with a 32 MHz Cortex-M3 core, 16 KB flash, and 4 KB RAM. Its low-power Stop mode and compact footprint suit battery-powered sensors and space-constrained control products. EFM32TG225F16-BGA48 is the closest same-capacity family option when its peripheral mapping matches the board, while EFM32TG225F32-BGA48T is preferable when additional flash space is needed for a bootloader or field updates. EFM32TG225F8-D-BGA48R only makes sense when the final firmware, working data, and update requirements comfortably fit within 8 KB. In every case, compare supply limits, temperature grade, package-ball assignments, and peripheral functions before approving a substitution.

与替代料对比

参数 本产品 EFM32TG225F16-BGA48 EFM32TG225F8-D-BGA48R EFM32TG225F32-BGA48T
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 48-BGA (4 x 4 mm) 48-BGA (4 x 4 mm) - same 48-BGA (4 x 4 mm) - same 48-BGA (4 x 4 mm) - same
Processor Core 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3
Maximum Clock Speed 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 16 KB 16 KB - same 8 KB (-50%) 32 KB (+100%)
Series EFM32 Tiny Gecko EFM32 Tiny Gecko EFM32 Tiny Gecko EFM32 Tiny Gecko

关键差异点

  • Same 16 KB flash configuration in the closest family alternative (对比 EFM32TG225F16-BGA48)
  • More memory headroom in the larger flash alternative (对比 EFM32TG225F32-BGA48T)
  • Low-power operation remains suitable for compact sensor products (对比 EFM32TG225F8-D-BGA48R)

设计说明

Use the 48-BGA land pattern, ball map, and recommended via arrangement from the manufacturer package drawing rather than adapting a generic BGA footprint. Confirm the board fabs 48-BGA assembly capability, solder-paste stencil aperture sizes, and inspection coverage for the 4 x 4 mm device. Provide a stable ground plane beneath the package and route sensitive analog inputs away from switching nodes and high-current traces.

The EFM32TG family can enter Stop mode at currents as low as 0.6 uA, but board-level leakage may dominate a design that spends long periods asleep. Check leakage from pull-up resistors, sensors, level shifters, and protection devices. Use the 1.85 V to 3.8 V device operating range to select the regulator and verify that the minimum operating voltage remains valid during battery discharge or dynamic supply transitions.

Do not treat every EFM32TG 48-BGA variant as an automatic substitute. Confirm flash density, SRAM, supply limits, temperature grade, peripheral availability, and each package-ball function against the manufacturer datasheets. The 16 KB flash on this device leaves limited room for a bootloader, application code, and field updates, so verify the linked binary size and reserve update space before production release.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS compliance is indicated by the distributor category information. The automotive, lead-free, halogen-free, REACH, and conflict-minerals statuses were not confirmed for this exact ordering code.

相关搜索

EFM32TG825F16-D-BGA48 EFM32TG825F16-D-BGA48 datasheet EFM32TG825F16-D-BGA48 datasheet pdf EFM32TG825F16-D-BGA48 pinout EFM32TG825F16-D-BGA48 schematic EFM32TG825F16-D-BGA48 equivalent EFM32TG825F16-D-BGA48 replacement EFM32TG825F16-D-BGA48 cross reference EFM32TG825F16-D-BGA48 footprint Silicon Labs EFM32TG825F16-D-BGA48 EFM32TG825F16-D-BGA48 price EFM32TG825F16-D-BGA48 stock 48 BGA 4x4 Cortex-M3 microcontroller EFM32TG825F16-D-BGA48 vs EFM32TG225F16-BGA48

相关元器件 & 术语

Silicon Labs EFM32TG825F16-D-BGA48 EFM32TG225F16-BGA48 EFM32TG225F8-D-BGA48R EFM32TG225F32-BGA48T EFM32 Tiny Gecko ARM Cortex-M3 32-bit microcontroller embedded microcontroller semiconductor 48-BGA BGA package family surface mount 16 KB flash memory 4 KB SRAM 32 MHz clock autonomous peripheral operation Stop mode 0.6 uA low-power current 150 uA/MHz run current battery-powered sensor node industrial condition monitoring wearable health tracker smart home sensor hub RoHS
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情