EFM32TG825F16-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG825F16-D-BGA48 ✓ 啟用中EFM32TG825F16-D-BGA48 概覽
An EFM32TG microcontroller belongs to the ARM Cortex-M3 > 32-bit microcontroller > embedded processor > semiconductor hierarchy. Unlike a general-purpose application processor, this device is designed around deterministic peripheral operation and rapid wake-up from energy-saving modes. The EFM32TG family is intended for portable sensors, industrial controllers, connected accessories, and other systems where average power consumption matters as much as processing performance.
The EFM32TG825F16-D-BGA48 provides 16 KB of program flash and 4 KB of SRAM, runs at up to 32 MHz, and supports a 1.85 V to 3.8 V operating supply range according to its component listing. Its Tiny Gecko architecture includes autonomous peripheral operation, high analog integration, and a low-power Stop mode that consumes as little as 0.6 uA. Run-mode consumption is listed as 150 uA/MHz, which is useful for estimating battery life during duty-cycled operation.
The MCU's architecture allows peripherals to handle timing, conversions, and data movement with limited processor intervention. This reduces the number of active CPU cycles required for common control tasks. Fast wake-up behavior also improves responsiveness in systems that spend most of their time in deep sleep and periodically collect sensor data or communicate with a host.
Typical uses include wearable health monitors, low-power wireless sensor nodes, industrial condition-monitoring devices, compact control modules, and battery-powered IoT equipment. The 48-BGA 4 x 4 mm package supports dense board layouts, although its fine-pitch construction requires careful inspection, solder-paste control, and reliable assembly processes.
When designing the PCB, follow the package drawing, land pattern, and recommended decoupling layout in the manufacturer datasheet. Provide local supply bypassing at the power pins and reserve programming and debug access before routing the compact board. Check assembly capability for 48-BGA components and confirm the exact package variant against the ordering information.
This page combines manufacturer specifications, package and memory details, application guidance, and a structured comparison with other EFM32TG devices. It is intended to help engineers evaluate firmware resources, low-power behavior, assembly requirements, and family alternatives without relying on a single short device summary.
直接替換替代品,適用於 EFM32TG825F16-D-BGA48 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: EFM32TG825F16-D-BGA48 (相同外形與佔位) — 差異在於 Flash Memory, Package, RAM, Supply Voltage Range, Architecture.
EFM32TG225F16-BGA48
✅ 直接替換聯絡詢價
查看資料表 →EFM32TG225F8-D-BGA48R
✅ 直接替換聯絡詢價
查看資料表 →EFM32TG225F32-BGA48T
✅ 直接替換📋 參考替代品(不在目錄中)
EFM32TG825F16-D-BGA48 最大額定值與電氣特性
| Series | EFM32 Tiny Gecko |
| Processor Core | ARM Cortex-M3, 32-bit |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 16 KB (16K x 8) |
| RAM | 4 KB |
| Core Architecture | Single-core |
| 工作電源電壓 | 1.85 V to 3.8 V |
| 封裝 | 48-BGA (4 x 4 mm) |
| 安裝類型 | Surface Mount |
| Low-Power Stop Mode Current | 0.6 uA |
| Run Mode Current | 150 uA/MHz |
| Wake-Up Behavior | Fast wake-up from energy-saving modes |
| Peripheral Architecture | Autonomous peripherals with high analog integration |
| RoHS 狀態 | RoHS Compliant |
EFM32TG825F16-D-BGA48 48-bga (4 x 4 mm) 腳位配置指南
EFM32TG825F16-D-BGA48(48-bga (4 x 4 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: EFM32TG825F16-D-BGA48.
請參閱 資料表 以查看完整腳位配置。
典型應用
EFM32TG825F16-D-BGA48 適用於 6 應用s: Battery-Powered Wireless Sensor Node, Industrial Condition Monitoring, Wearable Health and Fitness Tracker, Smart Home Sensor Hub, Connected Lighting Controller, Compact Data Acquisition Module.
Battery-Powered Wireless Sensor Node
The EFM32TG825F16-D-BGA48 fits compact wireless sensor nodes that periodically sample environmental or motion data and transmit short packets. Its 32 MHz Cortex-M3 core handles protocol processing, while autonomous peripherals and fast wake-up behavior reduce the time the processor must remain active. The family is listed at 150 uA/MHz in Run mode and down to 0.6 uA in Stop mode, allowing duty-cycled operation with a measurable battery-life benefit. The compact 48-BGA 4 x 4 mm package also preserves board area for a radio, sensor, and antenna. Firmware size should be checked against the 16 KB flash limit, including bootloader and radio-library overhead.
推薦
Industrial Condition Monitoring
The EFM32TG825F16-D-BGA48 is suitable for industrial monitoring modules that periodically read sensors and record vibration, temperature, or equipment status. Its 32-bit Cortex-M3 processor provides more headroom than an 8-bit controller, while autonomous peripheral operation can reduce processor intervention during routine data acquisition. Low-power Stop-mode entry helps devices spend most of their deployment interval in a low-energy state. The 1.85 V to 3.8 V operating range supports 3 V industrial sensor architectures. Confirm the device temperature grade and required interface pins against the production environmental specification before release.
推薦
Wearable Health and Fitness Tracker
The EFM32TG825F16-D-BGA48 can serve as the low-power controller in a wearable activity tracker or portable health sensor. Its fast wake-up from energy-saving modes supports immediate sampling when motion or physiological events are detected, while the 0.6 uA Stop-mode figure helps preserve battery capacity between events. The 48-BGA 4 x 4 mm package supports dense wrist-worn layouts, and the 4 KB RAM is adequate for compact buffering when final algorithms run on a companion device. Designers should reserve programming access and validate BGA assembly yield before high-volume production.
推薦
Smart Home Sensor Hub
The EFM32TG825F16-D-BGA48 fits compact smart-home sensor hubs that combine several low-power inputs with a local serial interface. Its 32 MHz Cortex-M3 core can manage protocol conversion, device filtering, and configuration updates, while the 16 KB flash provides space for a compact embedded application. Low-power operating modes are valuable in always-installed room sensors that spend most of their service life idle. The BGA package reduces footprint in wall-mounted products, although its fine pitch requires careful paste deposition and inspection. Validate the final pin assignment against the manufacturer package drawing before committing the PCB.
推薦
Connected Lighting Controller
The EFM32TG825F16-D-BGA48 can control compact connected lighting modules that need local dimming, button handling, and serial communications. Its 32-bit Cortex-M3 core supports responsive state-machine control, and the autonomous peripherals reduce CPU involvement in timing and I/O handling. Low-power stop behavior is useful in luminaires that must satisfy standby-energy targets while remaining responsive to a network command. The 48-BGA package is appropriate for densely populated LED driver boards, but the lighting-specific safety and isolation requirements must be handled separately from the MCU supply domain.
推薦
Compact Data Acquisition Module
The EFM32TG825F16-D-BGA48 is appropriate for small data-acquisition modules that periodically measure analog or digital inputs and transfer summarized results. The 32-bit Cortex-M3 core supports efficient filtering and data preparation, while autonomous peripherals improve responsiveness without continuous processor polling. Its 1.85 V to 3.8 V operating range supports 3 V systems and low-voltage sensor chains. Because the device offers 16 KB of flash and 4 KB of RAM, buffering strategies should avoid retaining large sample arrays. Pairing it with a dedicated external ADC can provide greater resolution and channel count.
推薦
推薦產品摘要
工程參考資料,適用於 EFM32TG825F16-D-BGA48 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EFM32TG225F16-BGA48 | EFM32TG225F8-D-BGA48R | EFM32TG225F32-BGA48T |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) - same | 48-BGA (4 x 4 mm) - same | 48-BGA (4 x 4 mm) - same |
| Processor Core | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 |
| Maximum Clock Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 16 KB - same | 8 KB (-50%) | 32 KB (+100%) |
| Series | EFM32 Tiny Gecko | EFM32 Tiny Gecko | EFM32 Tiny Gecko | EFM32 Tiny Gecko |
主要差異化特點
- Same 16 KB flash configuration in the closest family alternative (對比EFM32TG225F16-BGA48)
- More memory headroom in the larger flash alternative (對比EFM32TG225F32-BGA48T)
- Low-power operation remains suitable for compact sensor products (對比EFM32TG225F8-D-BGA48R)
設計說明
Use the 48-BGA land pattern, ball map, and recommended via arrangement from the manufacturer package drawing rather than adapting a generic BGA footprint. Confirm the board fabs 48-BGA assembly capability, solder-paste stencil aperture sizes, and inspection coverage for the 4 x 4 mm device. Provide a stable ground plane beneath the package and route sensitive analog inputs away from switching nodes and high-current traces.
The EFM32TG family can enter Stop mode at currents as low as 0.6 uA, but board-level leakage may dominate a design that spends long periods asleep. Check leakage from pull-up resistors, sensors, level shifters, and protection devices. Use the 1.85 V to 3.8 V device operating range to select the regulator and verify that the minimum operating voltage remains valid during battery discharge or dynamic supply transitions.
Do not treat every EFM32TG 48-BGA variant as an automatic substitute. Confirm flash density, SRAM, supply limits, temperature grade, peripheral availability, and each package-ball function against the manufacturer datasheets. The 16 KB flash on this device leaves limited room for a bootloader, application code, and field updates, so verify the linked binary size and reserve update space before production release.
合規資訊
RoHS compliance is indicated by the distributor category information. The automotive, lead-free, halogen-free, REACH, and conflict-minerals statuses were not confirmed for this exact ordering code.