EP2A40FB724C8 - APEX II FPGA 540 I/O 724-BGA | Altera (Intel)
MPN: EP2A40FB724C8 ✗ Cuối đờiEP2A40FB724C8 Tóm tắt
An FPGA (Field-Programmable Gate Array) is a type of programmable logic device that allows designers to configure digital logic blocks and interconnect via a hardware description language after manufacture. FPGAs occupy a hierarchical position from programmable logic device (PLD) -> complex programmable logic device (CPLD) -> FPGA -> programmable logic device family -> semiconductor. APEX II sits between older APEX 20K devices and the Stratix/GX families, offering a MultiCore architecture that combines look-up-table (LUT) logic with embedded system blocks (ESBs) for on-chip dual-port RAM, content-addressable memory, and FIFO functions.
Key features of the EP2A40FB724C8 include 540 user I/O pins, 655,360 bits of total RAM, 38,400 logic elements, an operating core voltage of 1.425 V to 1.575 V, a 724-ball FCBGA package measuring 35 mm x 35 mm, and a -8 speed grade designation. The MultiCore structure embeds up to 28,620 LUTs and dedicated carry/chain routing for high-speed arithmetic, while the embedded system blocks provide configurable dual-port SRAM with byte enables. JTAG (IEEE 1149.1) boundary-scan test is supported for board-level verification.
The architectural depth comes from combining fine-grained logic elements with coarse-grained ESBs, allowing engineers to map both random control logic and wide datapath or buffer memories without external components. The -8 speed grade designates a specific transistor-speed bin, with lower numbers indicating faster parts; system clocks and I/O toggling rates are defined per speed grade in the APEX II family datasheet.
Typical applications include high-speed telecommunication line cards, network switches and routers, ASIC prototyping, DSP co-processing front-ends, and large-format imaging or video processing pipelines. With 540 user I/O, the EP2A40FB724C8 supports wide external memory buses and multiple parallel interface standards. Designers should note the 724-BGA package requires multilayer PCB construction with controlled-impedance routing and BGA-specific fanout. Power estimation requires Quartus II power analyzer data, since APEX II core and I/O currents scale with toggle rate and logic utilization. This page synthesizes distributor availability, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho EP2A40FB724C8 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP2A40FB724C8 (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Process Technology, Family, Series, Architecture.
EP2A40B724C8
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2A40B724I8
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2A40B724C9
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2A40B724C7
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2A40B724I9
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2A40FB724C9
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EP2A40FB724C7
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EP2A40FB724I8
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EP2A40FB724C8 Tỷ lệ tối đa & tính chất điện
| Family | APEX II |
| Device Logic Elements | 38,400 |
| Typical Gates | 40,000 |
| Total RAM Bits | 655,360 |
| User I/O Pins | 540 |
| Core Voltage | 1.425 V to 1.575 V |
| Hộp | 724-BGA (FCBGA), 35 mm x 35 mm |
| Speed Grade | -8 |
| Nhiệt độ hoạt động | Commercial (0 C to +85 C) per suffix |
| Kiểu lắp đặt | Surface Mount (BGA) |
| Architecture | MultiCore (LUT + Embedded System Blocks) |
| Embedded System Blocks | Configurable dual-port SRAM / CAM / FIFO |
| Configuration Mode | JTAG / Passive Serial / Passive Parallel |
| Process Technology | CMOS, SRAM-based |
Hướng dẫn cấu hình chân EP2A40FB724C8 724-bga (fcbga), 35 mm x 35 mm
Cấu hình chân cho EP2A40FB724C8 (724-bga (fcbga), 35 mm x 35 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EP2A40FB724C8.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EP2A40FB724C8 phù hợp cho 6 Áp dụngs: Telecommunication Line Cards, Network Switches and Routers, ASIC Prototyping and Emulation, DSP Co-Processing Front-Ends, Industrial Imaging and Machine Vision, Avionics and Military Communication Systems.
Telecommunication Line Cards
The EP2A40FB724C8 fits telecommunication line cards because its 540 user I/O pins can simultaneously drive wide parallel datapaths (UTOPIA, POS-PHY, or proprietary Fabric-to-Fabric interfaces) alongside external ZBT/QDR SRAM and DDR SDRAM memory buses. With 655,360 bits of on-chip dual-port RAM, designers can buffer ATM cells or IP packets at line rate without external memory, reducing BOM cost and PCB complexity. The MultiCore LUT architecture supports sustained DSP datapaths such as Reed-Solomon forward-error-correction or Viterbi decoding, while the -8 speed grade comfortably clocks system frequencies above 100 MHz on internal logic. Power estimation should use the Quartus II PowerPlay analyzer with realistic toggle rates, and a heat-spreader or thermal pad is recommended for fully utilized 38,400 logic elements.
Được đề xuất
Network Switches and Routers
In network switches and routers, the EP2A40FB724C8 acts as a backplane interface controller or queue manager, exploiting its 540 I/O to bridge multiple SGMII/SPI-3 or XSBI ports concurrently to a switch-fabric ASIC. The 38,400 logic elements provide ample capacity for header parsing, classification, and queue-management logic, while the 655,360-bit embedded system blocks serve as low-latency packet buffers. The -8 speed grade supports 133 MHz DDR SDRAM controllers, sufficient for gigabit-class forwarding engines. Board designers should allocate 8-12 PCB layers for the 724-FCBGA breakout with microvia fanout, and provide independent VCCIO banks (2.5 V / 3.3 V) to mix LVCMOS and LVTTL I/O standards. For new designs, migration to Cyclone V GT in an EQFP package is recommended given APEX II's obsolete status.
Được đề xuất
ASIC Prototyping and Emulation
The EP2A40FB724C8 is well suited for ASIC prototyping because it integrates 38,400 logic elements with 655,360 bits of dual-port memory, sufficient to map RTL blocks of 50K-80K gates with on-chip testbench memory. The 540 user I/O pins let designers map multi-standard SoC peripheral buses (AMBA, OCP, or proprietary) directly to testbench connectors. Quartus II synthesis maps RTL directly to LUTs with predictable timing closure in the -8 speed grade, and the embedded system blocks provide dual-port RAM models that match ASIC SRAM macros closely. Power and thermal should be analyzed with realistic vector-based activity; the 724-FCBGA package handles moderate 3-5 W dissipation without forced airflow if top-side thermal relief is provided.
Được đề xuất
DSP Co-Processing Front-Ends
As a DSP co-processing front-end, the EP2A40FB724C8 provides the high I/O count needed to ingest parallel ADC data streams and the embedded memory for coefficient storage. The 540 user I/O pins accept LVDS or LVCMOS pairs from multi-channel 14-/16-bit ADCs at sample rates to 200 MSPS, while the MultiCore architecture implements pipelined FIR/IIR filters, FFT engines, and digital down-converters efficiently. Embedded system blocks configured as dual-port RAM hold 16K complex FFT coefficients, allowing continuous overlap-save or overlap-add processing. The -8 speed grade sustains >150 MHz on the internal datapath, suitable for real-time baseband processing in software-defined radio and digital video broadcast receivers.
Được đề xuất
Industrial Imaging and Machine Vision
The EP2A40FB724C8 serves industrial imaging and machine vision pipelines by combining 540 I/O for multi-camera LVDS links with 655,360 bits of on-chip RAM for line buffers in Bayer demosaic or edge-detection pipelines. Its 38,400 logic elements implement high-throughput image processing such as 2D convolution, color-space conversion, and feature extraction in real time on megapixel streams. The -8 speed grade supports Camera Link interfaces at full 80 MHz pixel clock, while embedded system blocks provide FIFO buffers for line-scan or area-scan camera data without external SRAM. Industrial temperature variants (the EP2A40B724I8) extend operation to -40 C to +100 C for factory-floor deployments.
Được đề xuất
Avionics and Military Communication Systems
The EP2A40FB724C8 supports avionics and military communication systems requiring high logic density and wide interface flexibility. The 540 I/O pins connect to MIL-STD-1553, ARINC 429, or proprietary high-speed serial backplanes, while the 655,360-bit on-chip memory handles protocol buffers and error-correction tables. The MultiCore architecture implements encryption cores, FFT engines, and protocol stacks concurrently. Designers must select industrial or military temperature grades (-40 C to +125 C) - these typically carry the I-suffix and are available through Rochester Electronics for legacy aerospace programs. Boards should use controlled-impedance stripline routing, hermetic or ruggedized packaging, and conformal coating to meet MIL-STD-810 environmental stress requirements.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP2A40FB724C8 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP2A40B724C8 | EP2A40B724I8 | EP2A40B724C9 | EP2A40B724C7 | EP2A40B724I9 |
|---|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | 724-BGA FCBGA (F-suffix, fine-pitch) | 724-BGA (standard pitch) - same | 724-BGA - same | 724-BGA - same | 724-BGA - same | 724-BGA - same |
| Logic Elements | 38,400 | 38,400 | 38,400 | 38,400 | 38,400 | 38,400 |
| User I/O | 540 | 540 | 540 | 540 | 540 | 540 |
| Total RAM Bits | 655,360 | 655,360 | 655,360 | 655,360 | 655,360 | 655,360 |
| Speed Grade | -8 | -8 | -8 | -9 (slower) | -7 (faster) | -9 (slower) |
| Temperature Range | Commercial 0 C to +85 C | Commercial | Industrial -40 C to +100 C | Commercial | Commercial | Industrial -40 C to +100 C |
| Core Voltage | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V |
| Lifecycle Status | Obsolete | Obsolete (Rochester authorized) | Obsolete (Rochester authorized) | Obsolete | Obsolete | Obsolete |
| Approx. Unit Price @ qty 1 (USD, 2026-09-08) | 285.00 | 270.00 | 310.00 | 260.00 | 295.00 | 300.00 |
Bảo phân biệt quan trọng
- Fine-pitch BGA (F-suffix) solder-ball geometry (vsEP2A40B724C8)
- Commercial temperature grade for cost-optimized designs (vsEP2A40B724I8)
- Balanced -8 speed grade for most designs (vsEP2A40B724C7)
Ghi chú thiết kế
Estimated: APEX II EP2A40 core current at 100 MHz and 50% toggle rate is approximately 1.5-2.5 A at 1.5 V core, equivalent to 2.3-3.8 W core dissipation. Plus I/O banks at typical 50-100 mA each at 3.3 V, total board power reaches 4-6 W per device. Use a buck regulator with at least 1.5x headroom (e.g., 5 A rating) per FPGA. Sequence VCCIO before VCC_CORE to avoid I/O latch-up; the LM3880 sequencer or RC delay on each rail is recommended. Decoupling requires at least 4 x 100 uF bulk, 20 x 10 uF, and 60 x 0.1 uF X7R ceramics placed adjacent to each BGA ball pair on the top and bottom layers.
The 724-BGA FCBGA package requires a 10-12 layer PCB with sequential lamination and microvia (laser-drilled) technology to escape the inner rows of balls. Use a 4-4-4 mil trace/space geometry with 0.5 mm pitch BGA fanout. Maintain a continuous reference plane under each routing layer; signal layers should always be paired with a solid GND or VCC plane to control impedance at 50 ohm single-ended or 100 ohm differential. Add thermal vias in a 4 x 4 array under the center balls for heat dissipation. All BGA pads require ENIG or immersion-silver surface finish to prevent solder joint embrittlement from tin-lead alternatives.
Estimated: Three common pitfalls with APEX II designs are (1) leaving JTAG TCK pulled high or floating during configuration, which can lock the part into JTAG mode - tie TCK low via 1 kohm to GND if unused; (2) underestimating in-rush current when VCCIO banks power up simultaneously and CMOS inputs have no soft-start; (3) using Quartus Prime instead of Quartus II, which does not support APEX II. Designers must use Quartus II 13.0sp1 or earlier archived versions. Additionally, configure unused I/O pins as tri-stated inputs with weak pull-ups to reduce in-rush and EMI during configuration; the Quartus II Device options panel sets this default.
Place the EP2A40FB724C8 on the top side with all decoupling and configuration components within 25 mm of the BGA. Match the configuration EPC flash (EPCS4 or EPC16) trace length to the FPGA DCLK and DATA pins to within 1 cm to avoid setup/hold violations at 50 MHz configuration clock. For multi-FPGA designs, isolate configuration chains with a buffer per device; do not daisy-chain more than two APEX II devices on one JTAG chain without a re-driver. Use a 4-layer JTAG TAP topology if boundary-scan testing is required, and reserve a GND ring around the BGA for EMI suppression at high I/O toggle rates.
Thông tin tuân thủ
RoHS and REACH compliance are not explicitly stated in the verified distributor listings as of 2026-09-08. APEX II was introduced before widespread RoHS mandates - many date codes are lead-bearing. RoHS-compliant screened stock may be available through specialty distributors; request a current material declaration before procurement for EU-bound products. AEC-Q100 is not applicable since APEX II is a commercial/industrial FPGA family not qualified for automotive.
