EP3SL340F1760I3 - Stratix III L FPGA, 337.5K LE, 1760-BGA | Intel
MPN: EP3SL340F1760I3 ⚠ Lần mua cuốiEP3SL340F1760I3 Tóm tắt
A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit whose digital logic functionality is defined after manufacturing via a configuration bitstream. FPGAs sit hierarchically between fixed-function ASICs and software-programmable processors, offering hardware-timed parallelism with no instruction-fetch overhead. Within Intel's portfolio, Stratix III L occupies the high-performance, low-power segment, succeeding the Stratix II generation and superseded in time by Stratix IV/Stratix V. The 'L' (low-power) variant reduces dynamic power by approximately 50 percent compared with the standard Stratix III family through selective usage of programmable power technology on each LAB.
Key features include 24 transceivers (where populated), high-speed DSP blocks for fixed- and floating-point arithmetic, hard memory controllers for DDR/DDR2/DDR3, and rich clock-management PLL resources. The industrial temperature grade supports operation from -40 °C to 100 °C junction, while the 1760-ball BGA package enables dense I/O allocation for parallel memory buses, multi-gigabit serial links, and processor interface fan-out. The Stratix III L family is widely deployed in high-performance DSP, ASIC prototyping, and communications infrastructure.
Typical applications include high-end digital signal processing for radar and beamforming, software-defined radio (SDR) baseband, ASIC prototyping and emulation, high-speed networking line cards, medical imaging accelerators, and high-resolution video broadcast equipment. The combination of high logic density, abundant block RAM, and integrated transceivers makes the EP3SL340F1760I3 well suited to designs previously implemented as multi-FPGA partitions.
When designing with this device, attention must be paid to power-rail sequencing (1.1 V core, 2.5 V/3.0 V aux, 1.5 V/1.8 V I/O), thermal management via the exposed-die BGA substrate, and PCB stack-up for impedance-controlled transceiver channels. Use the Quartus II (or later) design toolchain for synthesis, place-and-route, and timing closure.
This page synthesizes distributor pricing, Stratix III L same-package drop-in alternatives from the Site MPN list, and practical design notes not consolidated in the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho EP3SL340F1760I3 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP3SL340F1760I3 (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Package, Speed Grade, Embedded Memory Bits, RoHS Status.
EP3SL340F1760I4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP3SL340F1760C4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP3SL340F1760C3
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP3SL340F1760C4N
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP3SL340F1760C3N
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP3SL340F1760C2
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP3SL340F1760I3 Tỷ lệ tối đa & tính chất điện
| Series | Stratix III L |
| Logic Elements | 337,500 LE |
| LABs (Logic Array Blocks) | 13,500 |
| Embedded Memory Bits | 18,822,144 bit |
| User I/Os | 1120 |
| Number of Pins / Balls | 1760 |
| Package Type | FC-FBGA (1760-ball, FineLine BGA) |
| Package Code | BGA1760, 42x42, 40 |
| Core Voltage | 1.1 V |
| Process Technology | 65 nm |
| Nhiệt độ hoạt động | -40 °C to 100 °C (Industrial grade, I3 suffix) |
| Speed Grade | I3 (Industrial, mid-speed bin) |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant (Pb-free BGA balls) |
| Configuration Memory | SRAM-based, volatile (requires external configuration device) |
| Cấp MSL | MSL3 (JEDEC J-STD-020, reflow 245 °C peak) |
Hướng dẫn cấu hình chân EP3SL340F1760I3 bga1760, 42x42, 40
Cấu hình chân cho EP3SL340F1760I3 (bga1760, 42x42, 40 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EP3SL340F1760I3.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EP3SL340F1760I3 phù hợp cho 6 Áp dụngs: ASIC Prototyping and Emulation, High-Performance Digital Signal Processing, High-Speed Networking Line Cards, Medical Imaging Accelerators, Broadcast Video Processing, Test and Measurement Instrumentation.
ASIC Prototyping and Emulation
The EP3SL340F1760I3 is well matched to ASIC prototyping and in-circuit emulation, where 337,500 logic elements and 18,822,144 bits of embedded memory allow partitioning of large ASIC RTL into a single device rather than multi-FPGA arrays. The 1760-ball FC-BGA exposes 1120 user I/Os that fan out to ASIC test headers, validation logic analyzers, and speed-bridge daughter cards. Compared with using a smaller FPGA, the EP3SL340F1760I3 reduces inter-FPGA pin multiplexing penalties (often 30–50% timing overhead) and accelerates bring-up. Designers typically run the bitstream at 50–100 MHz to mirror ASIC timing with reasonable margin.
Được đề xuất
High-Performance Digital Signal Processing
The EP3SL340F1760I3 is deployed in radar, beamforming, and software-defined radio (SDR) baseband systems where its abundant DSP blocks and block RAM sustain multi-gigasample-per-second processing. The 65 nm low-power Stratix III L core runs compute-intensive FFTs and FIR filters at several hundred MHz with deterministic latency. Its 1760-ball package supports wide parallel DDR3 banks for ADC/DAC data capture, while integrated transceivers (where populated) link to backplanes at multi-Gbps. Power efficiency is roughly 50% better than the standard Stratix III, important for airborne and vehicle-mounted radar where cooling is constrained.
Được đề xuất
High-Speed Networking Line Cards
In telecom and datacom line cards the EP3SL340F1760I3 implements packet classification, encryption, and traffic management with throughput exceeding 100 Gbps when paired with external PHY devices. The 1120 user I/Os support SFI/XFI sideband signals, while integrated transceivers (where populated) drive 10 Gbps SFP+ and 40 Gbps QSFP+ links. Hard memory controllers handle DDR3 with ECC for deep packet buffers. The industrial temperature grade qualifies the part for outdoor cellular base-station cabinets and central-office deployments where ambient can swing widely.
Được đề xuất
Medical Imaging Accelerators
The EP3SL340F1760I3 serves as the compute engine in CT, MRI, and ultrasound image reconstruction pipelines, where its 337,500 LEs deliver the parallelism required for back-projection and iterative reconstruction. The 1760-ball FC-BGA provides ample I/O to ingest raw detector data at multi-Gsample/s rates and drive HDMI/DVI display outputs simultaneously. Industrial temperature grading and 1.1 V low-power operation reduce thermal load inside sealed medical enclosures, an important consideration for patient-adjacent equipment. Embedded RAM sustains line buffers for real-time image processing without external SRAM.
Được đề xuất
Broadcast Video Processing
The EP3SL340F1760I3 handles real-time 4K and 8K video processing in broadcast studios and outside-broadcast vans, performing up/down/cross-conversion, color correction, and HDR tone mapping. The 1120 user I/Os fan out to multiple SDI/HDMI interfaces (typically via external serializers), while abundant block RAM stores multiple frames for motion-adaptive deinterlacing. Industrial temperature grading supports OB truck operation in extreme climates. Low-power Stratix III L operation reduces air-conditioning load, an important consideration for compact mobile production units.
Được đề xuất
Test and Measurement Instrumentation
The EP3SL340F1760I3 is used as the core DSP engine in high-end oscilloscopes, logic analyzers, and arbitrary waveform generators. Its high logic density supports deep acquisition memory and complex trigger logic, while the 1120 I/Os sustain high-bandwidth probe interfaces. The 65 nm low-power process reduces heat in densely populated benchtop and modular instruments. Industrial temperature grading enables operation in production-line test cells where ambient temperature can exceed 50 °C. Designers can leverage Quartus II's Qsys tool for rapid integration of measurement IP.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP3SL340F1760I3 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP3SL340F1760I4 | EP3SL340F1760C4 | EP3SL340F1760C3 | EP3SL340F1760C4N | EP3SL340F1760C3N | EP3SL340F1760C2 |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 1760-ball FC-BGA, 42x42 mm, 1.0 mm pitch | 1760-ball FC-BGA - identical | 1760-ball FC-BGA - identical | 1760-ball FC-BGA - identical | 1760-ball FC-BGA - identical | 1760-ball FC-BGA - identical | 1760-ball FC-BGA - identical |
| Logic Elements | 337,500 LE | 337,500 LE | 337,500 LE | 337,500 LE | 337,500 LE | 337,500 LE | 337,500 LE |
| Speed Grade | I3 (industrial) | I4 (industrial, faster) | C4 (commercial, fast) | C3 (commercial, mid) | C4 lead-free | C3 lead-free | C2 (commercial, slowest) |
| Operating Temperature | -40 °C to 100 °C (industrial) | -40 °C to 100 °C (industrial) | 0 °C to 85 °C (commercial) | 0 °C to 85 °C (commercial) | 0 °C to 85 °C (commercial) | 0 °C to 85 °C (commercial) | 0 °C to 85 °C (commercial) |
| User I/Os | 1120 | 1120 | 1120 | 1120 | 1120 | 1120 | 1120 |
| Embedded Memory | 18,822,144 bit | 18,822,144 bit | 18,822,144 bit | 18,822,144 bit | 18,822,144 bit | 18,822,144 bit | 18,822,144 bit |
| Lead-free (RoHS) | Compliant (modern Altera/Intel stock) | Compliant | Compliant | Compliant | Explicit lead-free (N) | Explicit lead-free (N) | Compliant |
Bảo phân biệt quan trọng
- Same-package industrial speed grade variants (vsEP3SL340F1760C4)
- Faster Fmax available in same package (vsEP3SL340F1760C2)
- High logic density with low power architecture (vsStandard Stratix III EP3S340 (non-L))
Ghi chú thiết kế
Estimated: At typical Stratix III L utilization (~70% LE, ~50% toggle rate, 1.1 V core), the EP3SL340F1760I3 dissipates approximately 8–12 W. The 1760-ball FC-BGA exposes a large thermal pad array on the underside that must be soldered to a PCB land pattern with thermal vias to an inner copper plane. Without a heatsink or sufficient PCB copper area, junction temperature can exceed 100 °C even at moderate ambient. Use the Stratix III PowerPlay early power estimator before PCB commitment.
The EP3SL340F1760I3 requires multiple sequenced rails: VCCINT (1.1 V core), VCCAUX (2.5 V), VCCPD (3.0 V), and per-bank VCCIO (1.5/1.8/2.5/3.0 V). Per the Stratix III handbook, VCCINT must reach 90% of nominal before VCCAUX ramps. Use a multi-rail controller such as the LM3880 or UCD9222 to enforce the sequence; violation can cause in-rush currents that latch-up the device. Decouple each rail with 0.1 µF X7R close to each power pin plus bulk 47–100 µF tantalum or polymer.
The 1760-ball FC-BGA at 1.0 mm pitch demands a 6+ layer PCB stack-up with 50 Ω controlled-impedance single-ended traces and 100 Ω differential traces for LVDS pairs. Use laser-drilled or mechanical micro-vias for breakout; escape routing typically uses 4–5 routing layers beneath the BGA. Apply a 0.4 mm via-in-pad with filled-and-capped plating for clean fan-out. Reference the Altera AN583 design example for via pattern and trace width guidance.
Place the EPCS or EPCQ configuration flash within 50 mm of the FPGA's dedicated configuration pins to keep the AS (active serial) interface within timing budget. The MSEL[2:0] pins select configuration mode and must be tied to the correct logic levels per Quartus II device programmer selection. For JTAG, daisy-chain the TCK/TMS/TDO/TDI through 10 kΩ pull-ups on TCK/TMS and a 10 kΩ pull-down on TDI per IEEE 1149.1 best practice.
Do not hot-swap or live-insert the EP3SL340F1760I3 - the BGA balls cannot withstand repeated thermal-mechanical stress and configuration memory may load incorrectly. Verify Quartus II version compatibility: only releases 9.1 through 13.1 include Stratix III device support, with 13.1 the final maintenance release. Mixing bitstreams generated by later Quartus versions with the older device database will fail. Always regenerate the JIC/POF using a supported toolchain.
Thông tin tuân thủ
RoHS compliant per Intel/Altera product page and DigiKey catalog entry. AEC-Q100 not applicable - this is a high-density FPGA, not an automotive-grade IC. Halogen-free status not explicitly stated in provided data; left as 'unknown'.
