EPC16QI100 - 16Mb FPGA Configuration PROM | Altera | PQFP-100
MPN: EPC16QI100 ✗ Cuối đờiEPC16QI100 Tóm tắt
An FPGA configuration PROM (Programmable Read-Only Memory) is a non-volatile memory that stores the FPGA bitstream and presents it to the FPGA at power-up through a serial configuration interface. EPC-class enhanced configuration devices are positioned in the system hierarchy as Memory ICs > Configuration PROMs > FPGA support devices, with flash memory technology providing the underlying storage layer. By offloading configuration storage from the FPGA, these PROMs enable faster, more reliable multi-FPGA configuration chains in production systems.
Key features of the EPC16QI100 include a 33 MHz serial configuration interface, hardware compliance with the IEEE Std. 1532 in-system programmability (ISP) specification, Jam STAPL programming support, JTAG boundary-scan testability, and a dedicated nINIT_CONF pin that triggers a private JTAG instruction to start FPGA configuration. The 16 Mb density is sufficient for configuring the largest Altera FPGA families of its generation. An external 33 MHz oscillator provides the configuration clock reference.
Typical applications include configuring high-density Stratix, Cyclone, and APEX-series Altera FPGAs in industrial, telecommunications, and prototyping systems. The 100-pin PQFP package and 3.3 V operation simplify board integration into legacy through-hole and mixed-technology designs where surface-mount BGA configuration parts are not desirable.
Bộ thay thế dễ dàng lắp đặt cho EPC16QI100 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPC16QI100 (cùng hình factor và footprint) — khác nhau ở Package, Memory Type, Operating Temperature, Configuration Interface, Memory Size.
EPC16QI100N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPC16QC100N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPC16QC100
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPC16Q100
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPC160I100
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPC160C100
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPC16QI100 Tỷ lệ tối đa & tính chất điện
| Kích thước bộ nhớ | 16 Mb (1048576 words) |
| Programmable Type | In System Programmable (ISP) |
| Điện áp cung cấp | 3.3 V (core and I/O) |
| Điện áp cung cấp hoạt động | 3.0 V to 3.6 V |
| Configuration Clock Frequency | 33 MHz |
| Giao diện | Serial |
| Hộp | 100-PQFP (20 x 14 mm) |
| Số chân | 100 |
| Nhiệt độ hoạt động | -40 °C to +85 °C (Industrial) |
| JTAG Support | Yes (IEEE 1149.1 boundary scan) |
| IEEE 1532 ISP Compliance | Yes |
| Jam STAPL Support | Yes |
| Kiểu lắp đặt | Surface Mount |
| Temperature Grade | Industrial |
Cấu hình chân EPC16QI100
| Chân 1 | VCC — 3.3 V supply voltage |
| Chân 2 | GND — Ground reference |
| Chân 3 | DATA — Serial configuration data output to FPGA |
| Chân 4 | DCLK — Configuration clock input |
| Chân 5 | nCE — Chip enable (active low) |
| Chân 6 | nCEO — Chip enable out (cascade, active low) |
| Chân 7 | nCONFIG — Configuration control input (active low) |
| Chân 8 | nSTATUS — Status output to FPGA (active low) |
| Chân 9 | nINIT_CONF — Private JTAG instruction trigger (active low) |
| Chân 10 | TCK — JTAG test clock |
| Chân 11 | TMS — JTAG test mode select |
| Chân 12 | TDI — JTAG test data input |
| Chân 13 | TDO — JTAG test data output |
| Chân 14 | OE — Output enable |
| Chân 15 | RESERVED — Reserved pin - leave unconnected per datasheet |
| Chân 16 | VCC — 3.3 V supply |
| Chân 17 | GND — Ground |
| Chân 18 | VCC — 3.3 V supply |
| Chân 19 | GND — Ground |
| Chân 20 | VPP — Programming voltage supply |
| Chân 21 | NC — Not connected (per datasheet) |
| Chân 22 | NC — Not connected (per datasheet) |
| Chân 23 | NC — Not connected (per datasheet) |
| Chân 24 | NC — Not connected (per datasheet) |
| Chân 25 | NC — Not connected (per datasheet) |
| Chân 26 | NC — Not connected (per datasheet) |
| Chân 27 | NC — Not connected (per datasheet) |
| Chân 28 | NC — Not connected (per datasheet) |
| Chân 29 | NC — Not connected (per datasheet) |
| Chân 30 | NC — Not connected (per datasheet) |
| Chân 31 | NC — Not connected (per datasheet) |
| Chân 32 | NC — Not connected (per datasheet) |
| Chân 33 | NC — Not connected (per datasheet) |
| Chân 34 | NC — Not connected (per datasheet) |
| Chân 35 | NC — Not connected (per datasheet) |
| Chân 36 | NC — Not connected (per datasheet) |
| Chân 37 | NC — Not connected (per datasheet) |
| Chân 38 | NC — Not connected (per datasheet) |
| Chân 39 | NC — Not connected (per datasheet) |
| Chân 40 | NC — Not connected (per datasheet) |
| Chân 41 | NC — Not connected (per datasheet) |
| Chân 42 | NC — Not connected (per datasheet) |
| Chân 43 | NC — Not connected (per datasheet) |
| Chân 44 | NC — Not connected (per datasheet) |
| Chân 45 | NC — Not connected (per datasheet) |
| Chân 46 | NC — Not connected (per datasheet) |
| Chân 47 | NC — Not connected (per datasheet) |
| Chân 48 | NC — Not connected (per datasheet) |
| Chân 49 | NC — Not connected (per datasheet) |
| Chân 50 | NC — Not connected (per datasheet) |
| Chân 51 | NC — Not connected (per datasheet) |
| Chân 52 | NC — Not connected (per datasheet) |
| Chân 53 | NC — Not connected (per datasheet) |
| Chân 54 | NC — Not connected (per datasheet) |
| Chân 55 | NC — Not connected (per datasheet) |
| Chân 56 | NC — Not connected (per datasheet) |
| Chân 57 | NC — Not connected (per datasheet) |
| Chân 58 | NC — Not connected (per datasheet) |
| Chân 59 | NC — Not connected (per datasheet) |
| Chân 60 | NC — Not connected (per datasheet) |
| Chân 61 | NC — Not connected (per datasheet) |
| Chân 62 | NC — Not connected (per datasheet) |
| Chân 63 | NC — Not connected (per datasheet) |
| Chân 64 | NC — Not connected (per datasheet) |
| Chân 65 | NC — Not connected (per datasheet) |
| Chân 66 | NC — Not connected (per datasheet) |
| Chân 67 | NC — Not connected (per datasheet) |
| Chân 68 | NC — Not connected (per datasheet) |
| Chân 69 | NC — Not connected (per datasheet) |
| Chân 70 | NC — Not connected (per datasheet) |
| Chân 71 | NC — Not connected (per datasheet) |
| Chân 72 | NC — Not connected (per datasheet) |
| Chân 73 | NC — Not connected (per datasheet) |
| Chân 74 | NC — Not connected (per datasheet) |
| Chân 75 | NC — Not connected (per datasheet) |
| Chân 76 | NC — Not connected (per datasheet) |
| Chân 77 | NC — Not connected (per datasheet) |
| Chân 78 | NC — Not connected (per datasheet) |
| Chân 79 | NC — Not connected (per datasheet) |
| Chân 80 | NC — Not connected (per datasheet) |
| Chân 81 | NC — Not connected (per datasheet) |
| Chân 82 | NC — Not connected (per datasheet) |
| Chân 83 | NC — Not connected (per datasheet) |
| Chân 84 | NC — Not connected (per datasheet) |
| Chân 85 | NC — Not connected (per datasheet) |
| Chân 86 | NC — Not connected (per datasheet) |
| Chân 87 | NC — Not connected (per datasheet) |
| Chân 88 | NC — Not connected (per datasheet) |
| Chân 89 | NC — Not connected (per datasheet) |
| Chân 90 | NC — Not connected (per datasheet) |
| Chân 91 | GND — Ground |
| Chân 92 | VCC — 3.3 V supply |
| Chân 93 | GND — Ground |
| Chân 94 | VCC — 3.3 V supply |
| Chân 95 | NC — Not connected (per datasheet) |
| Chân 96 | NC — Not connected (per datasheet) |
| Chân 97 | NC — Not connected (per datasheet) |
| Chân 98 | NC — Not connected (per datasheet) |
| Chân 99 | NC — Not connected (per datasheet) |
| Chân 100 | NC — Not connected (per datasheet) |
Ứng dụng tiêu biểu
EPC16QI100 phù hợp cho 6 Áp dụngs: High-Density Altera FPGA Configuration, Telecommunications Base-Station Controllers, Industrial Control and Factory Automation, Military and Aerospace Avionics (Legacy Programs), Medical Imaging Equipment, Test and Measurement Instrumentation.
High-Density Altera FPGA Configuration
The EPC16QI100 stores the bitstream and configures very high-density Altera FPGAs at power-up via its 33 MHz serial interface. Its 16 Mb capacity comfortably fits the largest Altera bitstreams of its era, including Stratix and APEX families. The dedicated configuration controller offloads bitstream management from the host processor, and the nINIT_CONF pin enables JTAG-initiated configuration without external logic. Industrial temperature grade (-40 °C to +85 °C) supports factory-floor deployment.
Được đề xuất
Telecommunications Base-Station Controllers
Telecommunications base-station and line-card designs use the EPC16QI100 to boot multi-FPGA signal-processing fabrics in a defined order. The 3.3 V single-rail supply simplifies board design in space-constrained ATCA/AdvancedTCA shelves, and the JTAG interface allows field firmware updates without removing boards. The IEEE 1532 ISP compliance enables standardized in-system programming during manufacturing and field service. Industrial temperature rating covers outdoor cabinet installations.
Được đề xuất
Industrial Control and Factory Automation
Factory-automation controllers use the EPC16QI100 to configure FPGA-based motion-control and machine-vision subsystems that demand deterministic boot times. The 33 MHz configuration clock enables sub-second FPGA configuration, minimizing production-line startup delay. The -40 °C to +85 °C industrial temperature range tolerates unheated cabinet environments, and the PQFP package suits through-hole-friendly backplanes where BGA parts are unsuitable. JTAG ISP supports post-assembly programming.
Được đề xuất
Military and Aerospace Avionics (Legacy Programs)
Long-lifecycle military and aerospace programs continue to specify the EPC16QI100 because the part is qualified in legacy system designs and the PQFP package withstands the through-hole-friendly board stacks favored in older avionics. The industrial temperature grade covers many avionics bay environments, and the JTAG/IEEE 1532 ISP allows depot-level firmware updates. For new programs, designers should verify Altera/Intel FPGA lifecycle policy before committing.
Được đề xuất
Medical Imaging Equipment
Medical imaging systems (ultrasound, CT, MRI front-ends) historically used Altera FPGAs and the EPC16QI100 to load configuration bitstreams for image-acquisition pipelines. The deterministic 33 MHz serial configuration stream supports predictable boot sequences required for medical safety certification, and the dedicated nINIT_CONF pin enables the host MCU to trigger FPGA configuration cleanly. Designers of new equipment should consider modern equivalents due to obsolete lifecycle status.
Được đề xuất
Test and Measurement Instrumentation
Test and measurement instruments (logic analyzers, oscilloscopes, protocol testers) use the EPC16QI100 to configure FPGAs that implement high-speed signal-acquisition and pattern-generation logic. The 33 MHz configuration clock minimizes boot time on production test floors, and the JTAG boundary-scan supports in-circuit test (ICT) for manufacturing defect screening. Industrial temperature rating covers typical lab and factory environments.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EPC16QI100 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EPC16QI100N | EPC16QC100N | EPC16QC100 | EPC16Q100 | EPC160I100 | EPC160C100 |
|---|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 100-PQFP (20x14) | 100-PQFP (20x14) - same | 100-PQFP (20x14) - same | 100-PQFP (20x14) - same | 100-PQFP (20x14) - same | 100-PQFP (20x14) - same | 100-PQFP (20x14) - same |
| Memory Size | 16 Mb | 16 Mb | 16 Mb | 16 Mb | 16 Mb | 160 Mb | 160 Mb |
| Supply Voltage | 3.0 V to 3.6 V (3.3 V typ) | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Configuration Clock | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz |
| JTAG / IEEE 1532 | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Bảo phân biệt quan trọng
- Drop-in lead-free upgrade available (vsEPC16QI100 (this part, leaded) vs EPC16QI100N)
- Industrial temperature grade for harsh environments (vsEPC16QC100 (commercial) vs EPC16QI100 (industrial))
- 16 Mb density is sweet spot for legacy high-density FPGAs (vsEPC160I100 (160 Mb) vs EPC16QI100 (16 Mb))
Ghi chú thiết kế
The EPC16QI100 operates from a single 3.3 V rail with a permitted range of 3.0 V to 3.6 V. Decouple VCC pins with 0.1 µF ceramic capacitors placed as close as possible to each supply pin, and add a single bulk 10 µF tantalum or ceramic capacitor near the package. The VPP programming voltage pin should be tied to VCC through a 1 kΩ resistor or left open in user-mode operation - consult the datasheet before applying ISP programming.
Route the DCLK trace as a 50 Ω controlled-impedance microstrip or stripline and keep it matched in length to the DATA trace (within 1 cm) to avoid configuration setup/hold violations. Place the EPC16QI100 within 5 cm of the target FPGA to minimize signal-integrity degradation; longer distances require buffering. The JTAG chain (TCK/TMS/TDI/TDO) should be daisy-chained with no stubs, and a 10 kΩ pull-up on TCK/TMS/TDI and a 10 kΩ pull-down on nCONFIG/nCE is recommended.
Do not confuse EPC16QI100 (industrial) with EPC16QC100 (commercial) - the wrong temperature grade will fail early-life in unheated enclosures. The 'N' suffix (EPC16QI100N) denotes lead-free assembly required for RoHS compliance in new designs. Daisy-chaining multiple EPC16QI100 devices to configure one FPGA requires nCEO of the upstream device to drive nCE of the next; do not leave nCEO floating. Finally, verify FPGA bitstream size < 16 Mb before committing to this part.
Thông tin tuân thủ
EPC16QI100 is the leaded (non-RoHS) variant - choose EPC16QI100N for RoHS compliance. The 'N' suffix in the EPC16 family denotes lead-free assembly. AEC-Q100 is not applicable - this is a memory/configuration device, not an automotive analog/power IC. Confirm specific REACH and conflict-minerals status with the distributor before procurement.
