EPC16QI100 - 16Mb FPGA Configuration PROM | Altera | PQFP-100
Référence : EPC16QI100 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $24.5 | $24,50 |
| 10 | $22.1 | $221,00 |
| 100 | $19.8 | $1 980,00 |
| 500 | $17.6 | $8 800,00 |
| 1 000 | $15.4 | $15 400,00 |
EPC16QI100 Présentation
An FPGA configuration PROM (Programmable Read-Only Memory) is a non-volatile memory that stores the FPGA bitstream and presents it to the FPGA at power-up through a serial configuration interface. EPC-class enhanced configuration devices are positioned in the system hierarchy as Memory ICs > Configuration PROMs > FPGA support devices, with flash memory technology providing the underlying storage layer. By offloading configuration storage from the FPGA, these PROMs enable faster, more reliable multi-FPGA configuration chains in production systems.
Key features of the EPC16QI100 include a 33 MHz serial configuration interface, hardware compliance with the IEEE Std. 1532 in-system programmability (ISP) specification, Jam STAPL programming support, JTAG boundary-scan testability, and a dedicated nINIT_CONF pin that triggers a private JTAG instruction to start FPGA configuration. The 16 Mb density is sufficient for configuring the largest Altera FPGA families of its generation. An external 33 MHz oscillator provides the configuration clock reference.
Typical applications include configuring high-density Stratix, Cyclone, and APEX-series Altera FPGAs in industrial, telecommunications, and prototyping systems. The 100-pin PQFP package and 3.3 V operation simplify board integration into legacy through-hole and mixed-technology designs where surface-mount BGA configuration parts are not desirable.
Alternatives de remplacement direct pour EPC16QI100 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EPC16QI100 (même facteur de forme et même empreinte) — différant par Package, Memory Type, Operating Temperature, Configuration Interface, Memory Size.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EPC16QI100N
✅ Remplacement direct✓ En stock
$10.4 / unité
Voir la fiche technique →EPC16QC100N
✅ Remplacement direct✓ En stock
$24.1 / unité
Voir la fiche technique →EPC16QC100
✅ Remplacement direct✓ En stock
$14.95 / unité
Voir la fiche technique →EPC16Q100
✅ Remplacement direct✓ En stock
$9.75 / unité
Voir la fiche technique →EPC160I100
✅ Remplacement direct✓ En stock
$15.95 / unité
Voir la fiche technique →EPC160C100
✅ Remplacement direct✓ En stock
$7.2 / unité
Voir la fiche technique →EPC16QI100 Valeurs maximales et caractéristiques électriques
| Taille de mémoire | 16 Mb (1048576 words) |
| Programmable Type | In System Programmable (ISP) |
| Tension d'alimentation | 3.3 V (core and I/O) |
| Tension d'alimentation de fonctionnement | 3.0 V to 3.6 V |
| Configuration Clock Frequency | 33 MHz |
| Interface | Serial |
| Boîtier | 100-PQFP (20 x 14 mm) |
| Nombre de broches | 100 |
| Température de fonctionnement | -40 °C to +85 °C (Industrial) |
| JTAG Support | Yes (IEEE 1149.1 boundary scan) |
| IEEE 1532 ISP Compliance | Yes |
| Jam STAPL Support | Yes |
| Type de montage | Surface Mount |
| Temperature Grade | Industrial |
Configuration des broches de EPC16QI100
| Broche 1 | VCC — 3.3 V supply voltage |
| Broche 2 | GND — Ground reference |
| Broche 3 | DATA — Serial configuration data output to FPGA |
| Broche 4 | DCLK — Configuration clock input |
| Broche 5 | nCE — Chip enable (active low) |
| Broche 6 | nCEO — Chip enable out (cascade, active low) |
| Broche 7 | nCONFIG — Configuration control input (active low) |
| Broche 8 | nSTATUS — Status output to FPGA (active low) |
| Broche 9 | nINIT_CONF — Private JTAG instruction trigger (active low) |
| Broche 10 | TCK — JTAG test clock |
| Broche 11 | TMS — JTAG test mode select |
| Broche 12 | TDI — JTAG test data input |
| Broche 13 | TDO — JTAG test data output |
| Broche 14 | OE — Output enable |
| Broche 15 | RESERVED — Reserved pin - leave unconnected per datasheet |
| Broche 16 | VCC — 3.3 V supply |
| Broche 17 | GND — Ground |
| Broche 18 | VCC — 3.3 V supply |
| Broche 19 | GND — Ground |
| Broche 20 | VPP — Programming voltage supply |
| Broche 21 | NC — Not connected (per datasheet) |
| Broche 22 | NC — Not connected (per datasheet) |
| Broche 23 | NC — Not connected (per datasheet) |
| Broche 24 | NC — Not connected (per datasheet) |
| Broche 25 | NC — Not connected (per datasheet) |
| Broche 26 | NC — Not connected (per datasheet) |
| Broche 27 | NC — Not connected (per datasheet) |
| Broche 28 | NC — Not connected (per datasheet) |
| Broche 29 | NC — Not connected (per datasheet) |
| Broche 30 | NC — Not connected (per datasheet) |
| Broche 31 | NC — Not connected (per datasheet) |
| Broche 32 | NC — Not connected (per datasheet) |
| Broche 33 | NC — Not connected (per datasheet) |
| Broche 34 | NC — Not connected (per datasheet) |
| Broche 35 | NC — Not connected (per datasheet) |
| Broche 36 | NC — Not connected (per datasheet) |
| Broche 37 | NC — Not connected (per datasheet) |
| Broche 38 | NC — Not connected (per datasheet) |
| Broche 39 | NC — Not connected (per datasheet) |
| Broche 40 | NC — Not connected (per datasheet) |
| Broche 41 | NC — Not connected (per datasheet) |
| Broche 42 | NC — Not connected (per datasheet) |
| Broche 43 | NC — Not connected (per datasheet) |
| Broche 44 | NC — Not connected (per datasheet) |
| Broche 45 | NC — Not connected (per datasheet) |
| Broche 46 | NC — Not connected (per datasheet) |
| Broche 47 | NC — Not connected (per datasheet) |
| Broche 48 | NC — Not connected (per datasheet) |
| Broche 49 | NC — Not connected (per datasheet) |
| Broche 50 | NC — Not connected (per datasheet) |
| Broche 51 | NC — Not connected (per datasheet) |
| Broche 52 | NC — Not connected (per datasheet) |
| Broche 53 | NC — Not connected (per datasheet) |
| Broche 54 | NC — Not connected (per datasheet) |
| Broche 55 | NC — Not connected (per datasheet) |
| Broche 56 | NC — Not connected (per datasheet) |
| Broche 57 | NC — Not connected (per datasheet) |
| Broche 58 | NC — Not connected (per datasheet) |
| Broche 59 | NC — Not connected (per datasheet) |
| Broche 60 | NC — Not connected (per datasheet) |
| Broche 61 | NC — Not connected (per datasheet) |
| Broche 62 | NC — Not connected (per datasheet) |
| Broche 63 | NC — Not connected (per datasheet) |
| Broche 64 | NC — Not connected (per datasheet) |
| Broche 65 | NC — Not connected (per datasheet) |
| Broche 66 | NC — Not connected (per datasheet) |
| Broche 67 | NC — Not connected (per datasheet) |
| Broche 68 | NC — Not connected (per datasheet) |
| Broche 69 | NC — Not connected (per datasheet) |
| Broche 70 | NC — Not connected (per datasheet) |
| Broche 71 | NC — Not connected (per datasheet) |
| Broche 72 | NC — Not connected (per datasheet) |
| Broche 73 | NC — Not connected (per datasheet) |
| Broche 74 | NC — Not connected (per datasheet) |
| Broche 75 | NC — Not connected (per datasheet) |
| Broche 76 | NC — Not connected (per datasheet) |
| Broche 77 | NC — Not connected (per datasheet) |
| Broche 78 | NC — Not connected (per datasheet) |
| Broche 79 | NC — Not connected (per datasheet) |
| Broche 80 | NC — Not connected (per datasheet) |
| Broche 81 | NC — Not connected (per datasheet) |
| Broche 82 | NC — Not connected (per datasheet) |
| Broche 83 | NC — Not connected (per datasheet) |
| Broche 84 | NC — Not connected (per datasheet) |
| Broche 85 | NC — Not connected (per datasheet) |
| Broche 86 | NC — Not connected (per datasheet) |
| Broche 87 | NC — Not connected (per datasheet) |
| Broche 88 | NC — Not connected (per datasheet) |
| Broche 89 | NC — Not connected (per datasheet) |
| Broche 90 | NC — Not connected (per datasheet) |
| Broche 91 | GND — Ground |
| Broche 92 | VCC — 3.3 V supply |
| Broche 93 | GND — Ground |
| Broche 94 | VCC — 3.3 V supply |
| Broche 95 | NC — Not connected (per datasheet) |
| Broche 96 | NC — Not connected (per datasheet) |
| Broche 97 | NC — Not connected (per datasheet) |
| Broche 98 | NC — Not connected (per datasheet) |
| Broche 99 | NC — Not connected (per datasheet) |
| Broche 100 | NC — Not connected (per datasheet) |
Applications typiques
EPC16QI100 convient pour 6 applications: High-Density Altera FPGA Configuration, Telecommunications Base-Station Controllers, Industrial Control and Factory Automation, Military and Aerospace Avionics (Legacy Programs), Medical Imaging Equipment, Test and Measurement Instrumentation.
High-Density Altera FPGA Configuration
The EPC16QI100 stores the bitstream and configures very high-density Altera FPGAs at power-up via its 33 MHz serial interface. Its 16 Mb capacity comfortably fits the largest Altera bitstreams of its era, including Stratix and APEX families. The dedicated configuration controller offloads bitstream management from the host processor, and the nINIT_CONF pin enables JTAG-initiated configuration without external logic. Industrial temperature grade (-40 °C to +85 °C) supports factory-floor deployment.
Recommandé
Telecommunications Base-Station Controllers
Telecommunications base-station and line-card designs use the EPC16QI100 to boot multi-FPGA signal-processing fabrics in a defined order. The 3.3 V single-rail supply simplifies board design in space-constrained ATCA/AdvancedTCA shelves, and the JTAG interface allows field firmware updates without removing boards. The IEEE 1532 ISP compliance enables standardized in-system programming during manufacturing and field service. Industrial temperature rating covers outdoor cabinet installations.
Recommandé
Industrial Control and Factory Automation
Factory-automation controllers use the EPC16QI100 to configure FPGA-based motion-control and machine-vision subsystems that demand deterministic boot times. The 33 MHz configuration clock enables sub-second FPGA configuration, minimizing production-line startup delay. The -40 °C to +85 °C industrial temperature range tolerates unheated cabinet environments, and the PQFP package suits through-hole-friendly backplanes where BGA parts are unsuitable. JTAG ISP supports post-assembly programming.
Recommandé
Military and Aerospace Avionics (Legacy Programs)
Long-lifecycle military and aerospace programs continue to specify the EPC16QI100 because the part is qualified in legacy system designs and the PQFP package withstands the through-hole-friendly board stacks favored in older avionics. The industrial temperature grade covers many avionics bay environments, and the JTAG/IEEE 1532 ISP allows depot-level firmware updates. For new programs, designers should verify Altera/Intel FPGA lifecycle policy before committing.
Recommandé
Medical Imaging Equipment
Medical imaging systems (ultrasound, CT, MRI front-ends) historically used Altera FPGAs and the EPC16QI100 to load configuration bitstreams for image-acquisition pipelines. The deterministic 33 MHz serial configuration stream supports predictable boot sequences required for medical safety certification, and the dedicated nINIT_CONF pin enables the host MCU to trigger FPGA configuration cleanly. Designers of new equipment should consider modern equivalents due to obsolete lifecycle status.
Recommandé
Test and Measurement Instrumentation
Test and measurement instruments (logic analyzers, oscilloscopes, protocol testers) use the EPC16QI100 to configure FPGAs that implement high-speed signal-acquisition and pattern-generation logic. The 33 MHz configuration clock minimizes boot time on production test floors, and the JTAG boundary-scan supports in-circuit test (ICT) for manufacturing defect screening. Industrial temperature rating covers typical lab and factory environments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EPC16QI100 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EPC16QI100N | EPC16QC100N | EPC16QC100 | EPC16Q100 | EPC160I100 | EPC160C100 |
|---|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 100-PQFP (20x14) | 100-PQFP (20x14) - same | 100-PQFP (20x14) - same | 100-PQFP (20x14) - same | 100-PQFP (20x14) - same | 100-PQFP (20x14) - same | 100-PQFP (20x14) - same |
| Memory Size | 16 Mb | 16 Mb | 16 Mb | 16 Mb | 16 Mb | 160 Mb | 160 Mb |
| Supply Voltage | 3.0 V to 3.6 V (3.3 V typ) | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Configuration Clock | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz |
| JTAG / IEEE 1532 | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principaux différenciateurs
- Drop-in lead-free upgrade available (vs EPC16QI100 (this part, leaded) vs EPC16QI100N)
- Industrial temperature grade for harsh environments (vs EPC16QC100 (commercial) vs EPC16QI100 (industrial))
- 16 Mb density is sweet spot for legacy high-density FPGAs (vs EPC160I100 (160 Mb) vs EPC16QI100 (16 Mb))
Notes de conception
The EPC16QI100 operates from a single 3.3 V rail with a permitted range of 3.0 V to 3.6 V. Decouple VCC pins with 0.1 µF ceramic capacitors placed as close as possible to each supply pin, and add a single bulk 10 µF tantalum or ceramic capacitor near the package. The VPP programming voltage pin should be tied to VCC through a 1 kΩ resistor or left open in user-mode operation - consult the datasheet before applying ISP programming.
Route the DCLK trace as a 50 Ω controlled-impedance microstrip or stripline and keep it matched in length to the DATA trace (within 1 cm) to avoid configuration setup/hold violations. Place the EPC16QI100 within 5 cm of the target FPGA to minimize signal-integrity degradation; longer distances require buffering. The JTAG chain (TCK/TMS/TDI/TDO) should be daisy-chained with no stubs, and a 10 kΩ pull-up on TCK/TMS/TDI and a 10 kΩ pull-down on nCONFIG/nCE is recommended.
Do not confuse EPC16QI100 (industrial) with EPC16QC100 (commercial) - the wrong temperature grade will fail early-life in unheated enclosures. The 'N' suffix (EPC16QI100N) denotes lead-free assembly required for RoHS compliance in new designs. Daisy-chaining multiple EPC16QI100 devices to configure one FPGA requires nCEO of the upstream device to drive nCE of the next; do not leave nCEO floating. Finally, verify FPGA bitstream size < 16 Mb before committing to this part.
Informations de conformité
EPC16QI100 is the leaded (non-RoHS) variant - choose EPC16QI100N for RoHS compliance. The 'N' suffix in the EPC16 family denotes lead-free assembly. AEC-Q100 is not applicable - this is a memory/configuration device, not an automotive analog/power IC. Confirm specific REACH and conflict-minerals status with the distributor before procurement.
