Altera

EPF6024ATC144-14 - FLEX 6000 FPGA, 24K Gates, 144-TQFP | Altera

Name: EPF6024ATC144-14 - FLEX 6000 FPGA, 24K Gates, 144-TQFP | Altera
Brand: Altera
SKU: EPF6024ATC144-14

MPN: EPF6024ATC144-14 ✗ Cuối đời

3.3 V Vdss 144-pin TQFP Package -14 (slowest commercial) Speed SRAM (volatile, external ROM required) Memory

Yêu cầu báo giá

MOQ: 1 |

Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

Số lượng

EPF6024ATC144-14 Tóm tắt

The Altera EPF6024ATC144-14 is a member of the FLEX 6000 family of SRAM-based Field-Programmable Gate Arrays (FPGAs) housed in a 144-pin Thin Quad Flat Pack (TQFP) package. It integrates 24,000 typical gates (logic density), 1,960 logic elements (LEs) organized as 196 Logic Array Blocks (LABs), and 117 user I/O pins, making it a mid-density programmable logic solution for glue logic, bus interfacing, and state-machine-heavy designs in the late-1990s/early-2000s era.

A Field-Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that uses an array of configurable logic blocks (CLBs/LABs), programmable interconnects, and programmable I/O cells to implement arbitrary digital logic. FPGAs sit at the top of the programmable logic hierarchy (PLD -> CPLD -> FPGA) and offer the highest logic density and richest feature set at the cost of higher static power consumption and configuration memory requirements. The FLEX 6000 family uses a look-up-table (LUT)-based LAB architecture with SRAM configuration memory, requiring an external configuration ROM on power-up.

Key features of the EPF6024ATC144-14 include: 1,960 LEs, 196 LABs, 117 user I/O pins, typical operating frequency up to 200 MHz at the -3 speed grade, and 5V-tolerant I/O on a 3.3V core supply. The -14 speed grade denotes the slowest commercial grade, targeting cost-sensitive industrial and consumer applications where clock rates below 100 MHz are acceptable. The 144-pin TQFP package is a plastic surface-mount form factor with 0.5 mm lead pitch and a 22 mm x 22 mm body, designed for standard SMT reflow assembly.

The FLEX 6000 architecture uses a four-input LUT-based logic element, a hierarchical interconnect with FastTrack continuous routing, and embedded memory. The 1960-LE capacity is sufficient for medium-complexity glue logic, peripheral bridges, custom bus controllers, and instrumentation front-ends, but is now considered low-density by modern standards.

Typical applications include industrial motor-control interfaces, telecommunications line cards, custom peripheral bridges in legacy embedded systems, test and measurement backplanes, and ASIC prototyping. The 117 I/O pins support wide parallel buses (16-bit or 18-bit) common in legacy parallel interfaces such as ISA, PC/104, and VME.

When designing with this device, note that the FLEX 6000 family is mature and Intel/Altera recommends the MAX II or Cyclone series for new designs; the EPF6024ATC144-14 remains useful for long-lifecycle products, EOL bridge buys, and existing board repairs. Configuration requires an EPC configuration device or microcontroller-based configuration mode.

This page synthesizes distributor availability, parametric alternatives in the same 144-pin TQFP footprint, and practical lifecycle/design notes not consolidated on the manufacturer product page.

Bộ thay thế dễ dàng lắp đặt cho EPF6024ATC144-14 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPF6024ATC144-14 (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Operating Temperature, Process Technology, Configuration Memory.

EPF6016ATC144-3

Intel

Package: TQFP-144 (20 x 20 mm)

Speed Grade: -3

Operating Temperature: 0 °C to +85 °C (commercial)