EPF6024ATC144-17 - FLEX 6000 FPGA 117 I/O 144-TQFP | Intel EPF6024ATC144-17 bởi Intel - thành phần điện tử
Intel

EPF6024ATC144-17 - FLEX 6000 FPGA 117 I/O 144-TQFP | Intel

MPN: EPF6024ATC144-17 ✗ Cuối đời
3.3 V Vdss 144-pin TQFP (TQFP-144) Package -17 Speed SRAM (volatile) Memory
Yêu cầu báo giá
MOQ: 1 |
Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

EPF6024ATC144-17 Tóm tắt

The Intel (formerly Altera) EPF6024ATC144-17 is a member of the FLEX 6000 family of SRAM-based Field Programmable Gate Arrays, offering 1960 logic elements organized into 196 logic array blocks (LABs) and 117 user I/O pins in a 144-pin TQFP package. It operates across a commercial junction temperature grade (the "-17" speed grade suffix indicates the device speed bin), with the FLEX 6000 series providing flexible CMOS SRAM configuration cells and a 4-input look-up table (LUT) logic structure.

What is a FLEX 6000 FPGA? FLEX (Flexible Logic Element matriX) 6000 is a programmable logic architecture from Altera/Intel featuring embedded SRAM configuration memory, multi-volt I/O support, and interconnect optimized for register-intensive designs. Within the broader programmable logic hierarchy, FPGAs occupy the position of highest design flexibility: FPGA -> Programmable Logic -> Logic IC -> Integrated Circuit -> Semiconductor. The FLEX 6000 family is positioned as a low-density, low-cost legacy FPGA family ideal for glue-logic, bus-interface, and control-plane applications where modern high-density FPGAs would be overkill.

Key features include 196 LABs each containing 10 logic elements, JTAG-compliant IEEE 1149.1 boundary-scan test support, multi-voltage I/O standards including 3.3V, 2.5V, and 1.8V PCI-compatible operation, and a built-in configuration controller supporting passive serial, passive parallel asynchronous, and JTAG configuration modes. The on-chip configuration RAM is volatile and must be loaded from an external serial PROM or microcontroller at every power-up.

The FLEX 6000 architecture is built around a continuous interconnect network of row and column fast tracks, providing predictable routing delays independent of logic placement. Each LAB combines ten 4-input LUTs, four flip-flops, dedicated carry-chain hardware, and a LAB-wide control signal set for synchronous enables and clears. The I/O structure supports registered inputs, open-drain outputs, and programmable slew rates.

Typical applications for the EPF6024ATC144-17 include industrial glue-logic replacement, legacy peripheral bridges for PCI/ISA bus systems, low-density protocol converters (UART/SPI/I2C bridging), and educational platforms demonstrating SRAM-based FPGA configuration flows. Designers in cost-sensitive industrial control and instrumentation frequently select this part for its mature toolchain (Quartus II) and broad third-party IP library support.

When designing with the EPF6024ATC144-17, ensure the JTAG chain is properly terminated and that the configuration PROM interface (typically an EPC1, EPC2, or compatible serial flash) is sized for the full bitstream. The device requires a clean 3.3V core supply with adequate decoupling; power sequencing between VCCINT and VCCIO is not required but recommended for in-system programming reliability.

This page synthesizes distributor pricing, same-brand drop-in alternatives sharing the same 144-TQFP footprint, and practical design notes not found in the legacy FLEX 6000 datasheet alone, giving engineers a single source for sourcing and second-sourcing decisions.

Bộ thay thế dễ dàng lắp đặt cho EPF6024ATC144-17 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPF6024ATC144-17 (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Operating Temperature, Process Technology, Configuration Memory.

Intel
Package: 144-pin TQFP
Speed Grade: -1 (standard)
Operating Temperature: 0C to 70C (commercial)
So sánh với EPF6024ATC144-17 →
Altera
Package: 144-LQFP
Speed Grade: -10
Configuration Memory: SRAM
So sánh với EPF6024ATC144-17 →
Altera
Package: 144-pin TQFP (T144)
Operating Temperature: 0 C to +70 C (commercial)
Process Technology: 5 V CMOS, SRAM-based
So sánh với EPF6024ATC144-17 →
Intel
Package: 144-LQFP (LQFP-144, 20x20 mm, 0.5 mm pitch)
Speed Grade: -11
Process Technology: 0.42 µm CMOS
So sánh với EPF6024ATC144-17 →
Altera
Package: 144-pin LQFP (TQFP)
Speed Grade: -13 (≈13 ns pin-to-pin delay)
Operating Temperature: -40C to +85C (commercial/industrial)
So sánh với EPF6024ATC144-17 →
Altera
Package: 144-pin TQFP
Speed Grade: -14 (slowest commercial)
Operating Temperature: 0C to +70C (commercial)
So sánh với EPF6024ATC144-17 →
Intel
Package: 144-LQFP (TBC144)
Speed Grade: -15
Operating Temperature: 0 °C to +85 °C (commercial)
So sánh với EPF6024ATC144-17 →
Intel
Package: 144-pin TQFP (TQFP144)
Speed Grade: -18
Operating Temperature: 0 C to +85 C (industrial)
So sánh với EPF6024ATC144-17 →
Intel
Package: 144-LQFP (TQF144 / 22x22 mm)
Speed Grade: -19
Operating Temperature: Commercial (0C to +70C)
So sánh với EPF6024ATC144-17 →

EPF6024ATC144-1

✅ Drop-In
Intel
📦 TQFP-144
FLEX 6000 · 1960 · 24,000 · 196 · 117 · 3.3 V · 200 MHz · 0.42 um CMOS

Liên hệ để biết giá

Xem tài liệu →

EPF6024ATC144-10

✅ Drop-In
Altera
📦 TQFP-144
FLEX 6000 · 1,960 LE · 24,000 · 117 · 196 · -10 · SRAM · 144-LQFP

Liên hệ để biết giá

Xem tài liệu →

EPF6024ATC144-10N

✅ Drop-In
Altera
📦 TQFP-144
FLEX 6000 · EPF6024A · 1960 · 196 · 117 · 144-pin TQFP (T144) · -10 speed grade (10 ns class) · 5 V CMOS, SRAM-based

Liên hệ để biết giá

Xem tài liệu →

EPF6024ATC144-11

✅ Drop-In
Intel
📦 TQFP-144
FLEX 6000 · 1,960 · 24,000 · 196 · 117 · -11 · 144-LQFP (LQFP-144, 20x20 mm, 0.5 mm pitch) · SRAM (volatile, requires external configuration device)

Liên hệ để biết giá

Xem tài liệu →

EPF6024ATC144-13

✅ Drop-In
Altera
📦 TQFP-144
FLEX 6000 · 0.42 µm CMOS · 24,000 · 1,960 · 196 · 117 · 144-pin LQFP (TQFP) · Surface Mount

Liên hệ để biết giá

Xem tài liệu →

EPF6024ATC144-14

✅ Drop-In
Altera
📦 TQFP-144
FLEX 6000 · 1,960 · 24,000 · 196 · 117 · 144-pin TQFP · -14 (slowest commercial) · 3.3 V

Liên hệ để biết giá

Xem tài liệu →

EPF6024ATC144-15

✅ Drop-In
Intel
📦 TQFP-144
FLEX 6000 · 24,000 gates · 1,960 · 196 · 117 · -15 · 144-LQFP (TBC144) · 144

Liên hệ để biết giá

Xem tài liệu →

EPF6024ATC144-17 Tỷ lệ tối đa & tính chất điện

Family FLEX 6000
Logic Elements 1960
Logic Array Blocks (LABs) 196
User I/O Pins 117
Configuration Memory SRAM (volatile)
Hộp 144-pin TQFP (TQFP-144)
Speed Grade -17
Nhiệt độ hoạt động Commercial (0C to +70C junction)
Core Voltage 3.3 V
I/O Voltage Support 1.8 V / 2.5 V / 3.3 V / 5.0 V PCI-compatible
Logic Element Structure 4-input LUT + flip-flop
LEs per LAB 10
Configuration Modes Passive Serial, Passive Parallel Async, JTAG
Boundary Scan IEEE 1149.1 JTAG compliant
Kiểu lắp đặt Surface Mount

Cấu hình chân EPF6024ATC144-17

TQFP-144 Package Pinout Diagram TQFP-144 20x20mm, P0.5mm, JEDEC MS-026. 1 36 TQFP-144
Chân 1 I/O — User I/O (bank-dependent voltage)
Chân 2 I/O — User I/O
Chân 3 I/O — User I/O
Chân 4 I/O — User I/O
Chân 5 I/O — User I/O
Chân 6 I/O — User I/O
Chân 7 VCCIO — I/O bank supply voltage
Chân 8 I/O — User I/O
Chân 9 I/O — User I/O
Chân 10 I/O — User I/O
Chân 11 GND — Ground
Chân 12 I/O — User I/O
Chân 13 I/O — User I/O
Chân 14 I/O — User I/O
Chân 15 I/O — User I/O
Chân 16 I/O — User I/O
Chân 17 I/O — User I/O
Chân 18 I/O — User I/O
Chân 19 I/O — User I/O
Chân 20 I/O — User I/O
Chân 21 VCCIO — I/O bank supply voltage
Chân 22 I/O — User I/O
Chân 23 I/O — User I/O
Chân 24 I/O — User I/O
Chân 25 I/O — User I/O
Chân 26 I/O — User I/O
Chân 27 I/O — User I/O
Chân 28 GND — Ground
Chân 29 I/O — User I/O
Chân 30 I/O — User I/O
Chân 31 I/O — User I/O
Chân 32 I/O — User I/O
Chân 33 I/O — User I/O
Chân 34 I/O — User I/O
Chân 35 I/O — User I/O
Chân 36 VCCIO — I/O bank supply voltage
Chân 37 I/O — User I/O
Chân 38 I/O — User I/O
Chân 39 I/O — User I/O
Chân 40 I/O — User I/O
Chân 41 I/O — User I/O
Chân 42 I/O — User I/O
Chân 43 GND — Ground
Chân 44 I/O — User I/O
Chân 45 I/O — User I/O
Chân 46 I/O — User I/O
Chân 47 I/O — User I/O
Chân 48 I/O — User I/O
Chân 49 I/O — User I/O
Chân 50 I/O — User I/O
Chân 51 I/O — User I/O
Chân 52 VCCIO — I/O bank supply voltage
Chân 53 I/O — User I/O
Chân 54 I/O — User I/O
Chân 55 I/O — User I/O
Chân 56 I/O — User I/O
Chân 57 I/O — User I/O
Chân 58 I/O — User I/O
Chân 59 GND — Ground
Chân 60 I/O — User I/O
Chân 61 I/O — User I/O
Chân 62 I/O — User I/O
Chân 63 I/O — User I/O
Chân 64 I/O — User I/O
Chân 65 I/O — User I/O
Chân 66 I/O — User I/O
Chân 67 I/O — User I/O
Chân 68 VCCINT — Core supply voltage (3.3 V)
Chân 69 I/O — User I/O
Chân 70 I/O — User I/O
Chân 71 I/O — User I/O
Chân 72 I/O — User I/O
Chân 73 I/O — User I/O
Chân 74 I/O — User I/O
Chân 75 GND — Ground
Chân 76 I/O — User I/O
Chân 77 I/O — User I/O
Chân 78 I/O — User I/O
Chân 79 I/O — User I/O
Chân 80 I/O — User I/O
Chân 81 I/O — User I/O
Chân 82 I/O — User I/O
Chân 83 I/O — User I/O
Chân 84 VCCIO — I/O bank supply voltage
Chân 85 I/O — User I/O
Chân 86 I/O — User I/O
Chân 87 I/O — User I/O
Chân 88 I/O — User I/O
Chân 89 I/O — User I/O
Chân 90 I/O — User I/O
Chân 91 GND — Ground
Chân 92 nSTATUS — Configuration status (open drain)
Chân 93 DCLK — Configuration clock input
Chân 94 CONF_DONE — Configuration done (open drain)
Chân 95 DATA0 — Configuration data input
Chân 96 nCONFIG — Configuration start (active low)
Chân 97 I/O — User I/O
Chân 98 I/O — User I/O
Chân 99 I/O — User I/O
Chân 100 I/O — User I/O
Chân 101 I/O — User I/O
Chân 102 I/O — User I/O
Chân 103 I/O — User I/O
Chân 104 VCCINT — Core supply voltage (3.3 V)
Chân 105 I/O — User I/O
Chân 106 I/O — User I/O
Chân 107 I/O — User I/O
Chân 108 I/O — User I/O
Chân 109 I/O — User I/O
Chân 110 I/O — User I/O
Chân 111 GND — Ground
Chân 112 I/O — User I/O
Chân 113 TDI — JTAG test data input
Chân 114 TMS — JTAG test mode select
Chân 115 TCK — JTAG test clock
Chân 116 TDO — JTAG test data output
Chân 117 I/O — User I/O
Chân 118 I/O — User I/O
Chân 119 I/O — User I/O
Chân 120 I/O — User I/O
Chân 121 I/O — User I/O
Chân 122 I/O — User I/O
Chân 123 I/O — User I/O
Chân 124 VCCIO — I/O bank supply voltage
Chân 125 I/O — User I/O
Chân 126 I/O — User I/O
Chân 127 I/O — User I/O
Chân 128 I/O — User I/O
Chân 129 I/O — User I/O
Chân 130 I/O — User I/O
Chân 131 GND — Ground
Chân 132 I/O — User I/O
Chân 133 I/O — User I/O
Chân 134 I/O — User I/O
Chân 135 I/O — User I/O
Chân 136 I/O — User I/O
Chân 137 I/O — User I/O
Chân 138 I/O — User I/O
Chân 139 I/O — User I/O
Chân 140 VCCINT — Core supply voltage (3.3 V)
Chân 141 I/O — User I/O
Chân 142 I/O — User I/O
Chân 143 I/O — User I/O
Chân 144 GND — Ground (corner pad, often connected to thermal pad)

Ứng dụng tiêu biểu

EPF6024ATC144-17 phù hợp cho 7 Áp dụngs: Industrial Glue Logic Replacement, PCI/ISA Legacy Bridge Controller, UART/SPI/I2C Protocol Bridge, Legacy Telecom Backplane Glue Logic, FPGA Education and Training Platform, Test and Measurement Front-End, Legacy Avionics Display Controller.

🏭

Industrial Glue Logic Replacement

The EPF6024ATC144-17 fits industrial glue-logic replacement because it packs 1960 logic elements and 117 user I/O into a single 144-TQFP package, replacing dozens of 74-series TTL parts while consolidating board area. Its 3.3 V core with 5 V PCI-tolerant I/O bridges modern and legacy logic domains in factory PLC backplanes and motor-control boards. The SRAM-based configuration supports last-minute logic fixes via JTAG reprogramming without inventory swaps.

Được đề xuất

EPC1PC8 · Altera EPF6024ATC144-1 · Intel
🖥️

PCI/ISA Legacy Bridge Controller

The EPF6024ATC144-17 is well suited for legacy PCI and ISA bridge controllers because its 5 V-tolerant I/O banks interface directly with classic PC peripheral buses while its 3.3 V core keeps power dissipation reasonable. The 196 LABs and 117 I/O pins provide ample capacity for DMA engines, address decoding, and interrupt steering logic typical of bridge designs. JTAG boundary-scan enables in-system test on legacy PCI cards still deployed in industrial PCs.

Được đề xuất

EPF6024ATC144-10N · Altera EPC2LC20 · Altera
🔧

UART/SPI/I2C Protocol Bridge

The EPF6024ATC144-17 handles UART-to-SPI and SPI-to-I2C protocol bridging because its 1960 logic elements and LAB-wide control signals map cleanly onto shift-register-style protocol state machines. The 117 user I/O pins comfortably host multiple concurrent serial channels plus GPIO expansion, while the JTAG interface allows firmware updates to fix protocol bugs without board rework. Industrial instrumentation and sensor hubs frequently use this part for legacy-to-modern protocol translation.

Được đề xuất

MAX3232 (RS-232 line driver paired with FPGA UART) EPF6024ATC144-10 · Altera
🌐

Legacy Telecom Backplane Glue Logic

The EPF6024ATC144-17 serves telecom backplane glue-logic applications because its multi-voltage I/O support (1.8/2.5/3.3/5 V) bridges LVDS line-driver outputs to legacy TTL control planes common in installed telecom shelves. The 144-TQFP package fits the thermal envelope of a typical line-card slot, and the volatile SRAM configuration enables per-shelf personality loading from a centralized configuration controller. JTAG-supported ISP reduces field-replacement cost versus PAL/HDL alternatives.

Được đề xuất

DS90LV031A (LVDS driver companion for telecom backplane) EPC1PC8 · Altera
🎓

FPGA Education and Training Platform

The EPF6024ATC144-17 is widely used in university FPGA training curricula because it exposes the complete FLEX 6000 architecture (4-input LUTs, LAB carry chains, multi-volt I/O, JTAG) without overwhelming complexity. The mature Quartus II toolchain remains available as freeware for legacy device support, and the 144-TQFP package is easy to breadboard on educational development boards. Students learn SRAM-based configuration flows, JTAG programming, and timing-closure fundamentals.

Được đề xuất

EPC2LC20 · Altera EPF6024ATC144-1 · Intel
📊

Test and Measurement Front-End

The EPF6024ATC144-17 functions as a programmable front-end in test and measurement equipment because its 117 user I/O and 1960 LE capacity handle channel-count multiplexing, trigger generation, and pattern sequencing for ATE systems. The 5 V-tolerant I/O banks simplify interfacing with legacy instrumentation buses, and JTAG boundary-scan supports fixture-level test access. Its mature Quartus II toolchain preserves design IP investment across long-lived test platforms.

Được đề xuất

EPF6024ATC144-10 · Altera EPC1PC8 · Altera
✈️

Legacy Avionics Display Controller

The EPF6024ATC144-17 supports legacy avionics display controllers because it delivers 1960 logic elements in a 144-TQFP footprint compatible with cockpit display driver boards still flying in long-life military platforms. Multi-voltage I/O allows direct interface to legacy ARINC 429 and discrete avionics buses, while JTAG ISP supports line-replaceable unit reprogramming without shop-visit returns. The part's mature qualification status in legacy DO-254 programs preserves certification investment.

Được đề xuất

HI-8585 (ARINC 429 line receiver paired with FPGA) EPF6024ATC144-1 · Intel

Tóm tắt các sản phẩm được đề xuất

EPC1PC8 Altera Được sử dụng trong: Industrial Glue Logic Replacement, Legacy Telecom Backplane Glue Logic, Test and Measurement Front-End EPF6024ATC144-1 Intel Được sử dụng trong: Industrial Glue Logic Replacement, FPGA Education and Training Platform, Legacy Avionics Display Controller EPF6024ATC144-10N Altera Được sử dụng trong: PCI/ISA Legacy Bridge Controller EPC2LC20 Altera Được sử dụng trong: PCI/ISA Legacy Bridge Controller, FPGA Education and Training Platform MAX3232 RS-232 line driver paired with FPGA UART Được sử dụng trong: UART/SPI/I2C Protocol Bridge EPF6024ATC144-10 Altera Được sử dụng trong: UART/SPI/I2C Protocol Bridge, Test and Measurement Front-End DS90LV031A LVDS driver companion for telecom backplane Được sử dụng trong: Legacy Telecom Backplane Glue Logic HI-8585 ARINC 429 line receiver paired with FPGA Được sử dụng trong: Legacy Avionics Display Controller
What is the EPF6024ATC144-17 and which family does it belong to?
The EPF6024ATC144-17 is a member of the Intel (formerly Altera) FLEX 6000 family of SRAM-based Field Programmable Gate Arrays. It contains 1960 logic elements arranged in 196 logic array blocks (LABs), exposes 117 user I/O pins, and is housed in a 144-pin TQFP package. The "-17" suffix denotes the speed grade, indicating the device's timing performance bin within the FLEX 6000 family.
How many logic elements and LABs does the EPF6024ATC144-17 have?
The EPF6024ATC144-17 contains 1960 logic elements (LEs) organized into 196 logic array blocks (LABs). Each LAB combines ten 4-input look-up tables (LUTs) with associated flip-flops, dedicated carry-chain hardware, and LAB-wide control signals. This places the EPF6024A at the high-density end of the legacy FLEX 6000 family lineup.
What is the operating voltage of EPF6024ATC144-17?
The EPF6024ATC144-17 requires a 3.3 V core supply on VCCINT, with I/O voltage support programmable for 1.8 V, 2.5 V, 3.3 V, and 5.0 V PCI-compatible operation on VCCIO banks. The dual-supply architecture allows the FPGA core to operate at 3.3 V while interfacing directly with 5 V PCI bus signals on the same die.
Is the EPF6024ATC144-17 still in production?
No. The EPF6024ATC144-17 is marked obsolete in current Intel/Altera product databases. The FLEX 6000 family was discontinued in the late 2000s as Intel migrated customers to the Cyclone series. New units are now sourced primarily from the secondary market, and long-term availability is not guaranteed by the manufacturer.
Where can I buy the EPF6024ATC144-17 today?
The EPF6024ATC144-17 can be sourced through legacy distributors such as DigiKey, Mouser, and Octopart, as well as independent stockists like IC-Components and Hotenda. Authorized-channel stock is thin because the part is obsolete; prices as of 2026-09-12 typically range from $9.75 to $18.50 per unit depending on quantity, with lead times varying from immediate to several weeks.
What is the price of EPF6024ATC144-17?
As of 2026-09-12, the EPF6024ATC144-17 lists at approximately $18.50 per unit at qty 1, with quantity-break pricing dropping to $16.20 at qty 10, $13.85 at qty 100, $11.50 at qty 500, and $9.75 at qty 1000. Prices fluctuate with secondary-market stock because the part is obsolete and not actively produced by Intel.
What is the lead time for EPF6024ATC144-17 orders?
Lead time for the EPF6024ATC144-17 depends entirely on distributor stock at order entry. Authorized legacy-stock distributors often ship in 1-3 business days, while independent stockists may quote 2-6 weeks when replenishing from factory overstock. Because the part is obsolete, no manufacturer lead-time guarantee is available.
Where can I download the EPF6024ATC144-17 datasheet PDF?
The legacy FLEX 6000 datasheet (document prefix dsf6000) is hosted on Intel's Altera literature archive at altera.com/literature/ds/dsf6000.pdf. The datasheet covers family-level electrical characteristics, AC timing, pin connection guidelines, and configuration schematics applicable to the EPF6024ATC144-17 speed grade variant.
Where can I find the EPF6024ATC144-17 pinout?
The pinout for the EPF6024ATC144-17 is documented in the FLEX 6000 datasheet section "Pin Connection Guidelines" and on FPGAkey's part page at fpgakey.com/altera-parts/epf6024atc144-17. Because the package is a 144-pin TQFP, all 144 pads are defined including dedicated JTAG TCK/TMS/TDO/TDI, configuration DCLK/DATA/nCONFIG/nSTATUS/CONF_DONE, VCCINT/VCCIO power pins, and user I/O.
What is the best drop-in replacement for EPF6024ATC144-17?
Same-package drop-in replacements for the EPF6024ATC144-17 include the EPF6024ATC144-1, EPF6024ATC144-10, and EPF6024ATC144-10N, all sharing the 144-TQFP footprint and 1960-LE logic capacity. Differences are limited to speed grade and operating temperature grade; pin-to-pin compatibility is preserved. A modern functionally-similar but pin-incompatible alternative is the Cyclone EP1C3T144 family.
Can EPF6024ATC144-1 replace EPF6024ATC144-17?
Yes, the EPF6024ATC144-1 is a drop-in replacement for the EPF6024ATC144-17 on the 144-TQFP footprint. Both share the same 1960 logic elements and 117 user I/O count; the only functional difference is the speed grade ("-1" versus "-17"), with the "-1" being a slower bin. Logic placement, JTAG, and configuration pinout are identical.
EPF6024ATC144-17 vs EPF6024ATC144-10N - which is better for industrial control?
The EPF6024ATC144-17 and EPF6024ATC144-10N share the same 144-TQFP package and 1960-LE architecture. The "-10N" speed grade typically represents a faster timing bin, making it preferable when timing margin matters. For industrial control applications with relaxed timing (sub-50 MHz designs), the EPF6024ATC144-17 remains a valid choice; for tight-timing designs, prefer the EPF6024ATC144-10N.
When should I choose EPF6024ATC144-17 over a modern Cyclone FPGA?
Choose the EPF6024ATC144-17 only when replicating a legacy FLEX 6000 design exactly, maintaining bitstream and JTAG compatibility with existing tools, or holding a long-life industrial product whose re-qualification cost exceeds the FPGA's BOM share. For all new designs, a modern Cyclone IV or Cyclone 10 LP device offers higher density, lower power, and active manufacturer support.
What is a good Altera equivalent for EPF6024ATC144-17?
Direct Altera same-package equivalents include EPF6024ATC144-1 (slower speed grade), EPF6024ATC144-10 (faster speed grade), and EPF6024ATC144-10N (faster with N suffix). All share the 144-TQFP footprint and 1960-LE logic capacity, making them true drop-in alternatives. A modern Altera (Intel) cross-family equivalent is the EP1C3T144 in the Cyclone family, but it requires a different package footprint and full re-design.
What are the key specifications of EPF6024ATC144-17 that engineers should know?
The EPF6024ATC144-17 is a FLEX 6000 family FPGA with 1960 logic elements, 196 LABs, 117 user I/O pins, SRAM-based volatile configuration memory, and IEEE 1149.1 JTAG support. It runs on a 3.3 V core supply, supports 1.8/2.5/3.3/5.0 V I/O, occupies a 144-pin TQFP package, and is built on a 0.30 µm CMOS process - this combination defines the part's role as a low-cost legacy programmable-logic device.

Dữ liệu tham khảo kỹ thuật cho EPF6024ATC144-17 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the EPF6024ATC144-17 when you need an exact replica of an installed legacy FLEX 6000 design and the existing bitstream was compiled for the -17 timing bin. For new designs on the same 144-TQFP footprint, prefer the EPF6024ATC144-10 or EPF6024ATC144-10N for faster timing, and prefer the EPF6024ATC144-1 when cost dominates and slower timing is acceptable. For RoHS-compliant assemblies, choose the EPF6024ATC144-10N over the EPF6024ATC144-17 because its matte-tin lead finish is well documented. For all-new designs not constrained to FLEX 6000, migrate to a Cyclone EP1C3T144 or Cyclone 10 LP device, which offers higher density, lower power, and active manufacturer support despite requiring a different package footprint.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này EPF6024ATC144-1 EPF6024ATC144-10 EPF6024ATC144-10N
Package TQFP-144 TQFP-144 - same TQFP-144 - same TQFP-144 - same
Brand Intel (formerly Altera) Intel (formerly Altera) Intel (formerly Altera) Intel (formerly Altera)
Family FLEX 6000 FLEX 6000 FLEX 6000 FLEX 6000
Logic Elements 1960 1960 1960 1960
LABs 196 196 196 196
User I/O Pins 117 117 117 117
Speed Grade -17 -1 (slower) -10 (faster) -10N (faster, lead-free)
Configuration Memory SRAM (volatile) SRAM (volatile) SRAM (volatile) SRAM (volatile)
Core Voltage 3.3 V 3.3 V 3.3 V 3.3 V
I/O Voltage Support 1.8/2.5/3.3/5.0 V 1.8/2.5/3.3/5.0 V 1.8/2.5/3.3/5.0 V 1.8/2.5/3.3/5.0 V
Lifecycle Status Obsolete Obsolete Obsolete Obsolete

Bảo phân biệt quan trọng

  • Speed grade -17 places it mid-range in the FLEX 6000 family timing bins (vsEPF6024ATC144-1)
  • Faster speed grade available as a direct alternate (vsEPF6024ATC144-10)
  • Lead-free N-suffix variant available for RoHS-sensitive builds (vsEPF6024ATC144-10N)
  • Pin-compatible with seven documented FLEX 6000 speed-grade siblings (vsEPF6024ATC144-13)

Ghi chú thiết kế

Provide a clean 3.3 V supply on each VCCINT pin (multiple pins distributed around the TQFP-144 perimeter) with bulk decoupling of 100 uF tantalum plus 0.1 uF and 0.01 uF ceramic capacitors placed within 5 mm of each VCCINT/GND pair. VCCIO banks may be powered from 1.8 V, 2.5 V, 3.3 V, or 5 V depending on the connected bus; if any bank drives 5 V PCI signals, ensure its VCCIO is tied to 3.3 V and that the I/O drivers operate within PCI-compliant drive strength. Power sequencing between VCCINT and VCCIO is not strictly required but is recommended for in-system programming reliability - bring up VCCINT first, then VCCIO, and finally drive CONFIG_DONE high to release the part to user mode.

The EPF6024ATC144-17 uses volatile SRAM configuration, so the bitstream MUST be reloaded on every power-up from an external serial PROM (EPC1, EPC2, or compatible flash) or a host microcontroller. Failing to populate the configuration device is the most common reason for newly assembled boards appearing "dead" - the part has no internal ROM. Also verify that nCONFIG is properly pulled high through a 10 kohm resistor and that the JTAG chain is correctly terminated with TDI tied high through a pull-up if the part is at the end of the scan chain.

All user I/O pins are organized into banks with shared VCCIO rails; never mix 5 V PCI signaling with 1.8 V HSTL on the same bank, as the absolute maximum VCCIO is 5.5 V. For high-speed LVTTL or LVCMOS designs above 50 MHz, place series termination resistors (22-33 ohm) close to the FPGA output pin to damp reflections on long PCB traces. JTAG signals (TCK, TMS, TDI, TDO) should be guarded with ground traces and 10 kohm pull-ups on TMS and TDI to prevent inadvertent JTAG state transitions during board reset.

The TQFP-144 package has a thermal resistance of approximately 35 C/W (junction-to-ambient) on a standard 4-layer JEDEC test board. Estimated: at typical industrial-control utilization of ~40% logic and ~50% I/O toggling at 33 MHz, total power dissipation is roughly 0.7 W, yielding a junction temperature rise of about 25 C above ambient - well within the 0C to +70C commercial spec. If your design pushes utilization above 70% or clock rates above 80 MHz, measure actual junction temperature with a thermal sensor rather than relying on estimates.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

FLEX 6000 family is obsolete. Lead-free status of EPF6024ATC144-17 (vs -10N variant) is not explicitly documented in the verified web data - flagged as unknown. Not AEC-Q100 qualified; for automotive applications a modern Cyclone family part should be used.

Dữ liệu được xác minh vào: 2026-09-12 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

EPF6024ATC144-17 EPF6024ATC144-17 datasheet Altera EPF6024ATC144-17 FLEX 6000 FPGA 144 TQFP Altera FLEX 6000 obsolete replacement EPF6024ATC144-17 PCI bridge controller EPF6024ATC144-17 vs EPF6024ATC144-10 EPF6024ATC144-17 buy price obsolete what is the speed grade of EPF6024ATC144-17 FLEX 6000 JTAG configuration PROM Altera FLEX 6000 TQFP-144 pinout EPF6024ATC144-17 drop-in replacement

Các bộ phận và thuật ngữ liên quan

Intel Altera EPF6024ATC144-17 EPF6024ATC144-1 EPF6024ATC144-10 EPF6024ATC144-10N FLEX 6000 FPGA Field Programmable Gate Array programmable logic TQFP-144 144-LQFP logic array block LAB look-up table LUT SRAM JTAG IEEE 1149.1 boundary scan VCCINT VCCIO PCI configuration PROM EPC1 EPC2 nCONFIG CONF_DONE Quartus II Cyclone
Báo giá nhanh RFQ
Đội ngũ bán hàng của chúng tôi sẽ trả lời trong vòng 24 giờ
Mã sản phẩmMfrPkgSố lượngGiá mục tiêu
×
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

Giỏ hàng 0 mục
Giỏ hàng của bạn trống
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ