Altera

EPF8820ARC208-3-NW - 8K-Gate FLEX 8000 FPGA, 208-RQFP | Altera

MPN: EPF8820ARC208-3-NW ✗ Cuối đời

4.75 V to 5.25 V Vdss 208-BFQFP / 208-RQFP (28x28 mm) Exposed Pad Package

Yêu cầu báo giá

MOQ: 1 |

Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

Số lượng

EPF8820ARC208-3-NW Tóm tắt

The Altera (now Intel) EPF8820ARC208-3-NW is a member of the FLEX 8000 family of CMOS programmable logic devices (PLDs), delivering up to 8,000 usable gates, 1,500 registers, and 152 user I/O pins in a 208-pin RQFP (28x28 mm) package with an exposed thermal pad. The device operates from a 4.75 V to 5.25 V single supply and supports system clock frequencies consistent with 5 V FLEX 8000 silicon, making it a drop-in legacy option for industrial and military designs.

A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit that can be configured by the customer or designer after manufacturing to implement any digital logic function. FPGAs sit in the broader taxonomy of programmable logic devices -> complex programmable logic devices (CPLDs) and FPGAs -> programmable logic -> digital IC -> integrated circuit. FLEX 8000 devices occupy the high-density register-rich segment of Altera's classic SRAM-based FPGA portfolio, sitting between early MAX-class CPLDs and later APEX/Cyclone families in both density and process node.

Key features include in-circuit reconfigurability (ICR) via external configuration devices or intelligent controllers, 100% factory-tested logic, multiVolt I/O support in compatible families, and JTAG-based boundary-scan testing. The device offers 4.75V-5.25V core supply tolerance, 152 user I/Os, and a power-optimized architecture that supports sleep mode for low-power standby. The exposed thermal pad on the 208-RQFP package allows PCB ground-plane attachment for improved heat spreading in industrial chassis. The FLEX 8000 architecture uses an SRAM-based look-up table (LUT) fabric with embedded register cells, offering faster place-and-route than CPLDs but requiring configuration at every power-up.

Typical applications include industrial glue logic replacement, telecommunications backplane glue, legacy 5 V bus controllers, prototyping platforms for VHDL/Verilog designs, and digital signal conditioning interfaces. The device is well suited to designs that need high register count and I/O density without migrating to newer 3.3 V / 1.5 V FPGA families, particularly where the 5 V tolerance of FLEX 8000 is required. Design considerations include mandatory external configuration memory (EPC) for SRAM configuration cells, JTAG programming chain design, and careful 5 V power-rail decoupling to support hot-swap or backplane insertion. This page synthesizes distributor pricing, FLEX 8000 family alternatives, and configuration-memory design notes that go beyond the bare datasheet.

Bộ thay thế dễ dàng lắp đặt cho EPF8820ARC208-3-NW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPF8820ARC208-3-NW (cùng hình factor và footprint) — khác nhau ở Process Technology, Package, Configuration Method, Usable Gates, In-Circuit Reconfigurability.

EPF8820ARC208-2

Altera

Process Technology: 0.42 µm CMOS

Package: 208-pin RQFP / BFQFP with exposed pad

Configuration Method: SRAM - serial EPC device, parallel EPROM, or microcontroller