FF800R12KF4 - 1200V 800A Dual IGBT Module | Infineon
MPN: FF800R12KF4 ✓ Hoạt độngFF800R12KF4 Tóm tắt
An IGBT (Insulated Gate Bipolar Transistor) module combines the high input impedance of a MOSFET with the low on-state voltage drop of a bipolar transistor. Within the power electronics hierarchy, IGBT modules are the core switching elements of inverters, converters, and motor drives, converting DC to AC and regulating power flow from kilowatt to megawatt scale.
Key features include a 1200V VCES rating, 800A DC collector current, 5000W maximum power dissipation, and a 150C maximum junction temperature. The module integrates two IGBTs with anti-parallel fast-recovery diodes, enabling half-bridge topologies with low reverse-recovery losses. Its isolated baseplate provides safe mounting and effective heat extraction.
Technically, the FF800R12KF4 utilizes Infineon trench-gate IGBT technology, which reduces VCE(sat) and switching losses for higher system efficiency. The low-inductance package design limits voltage overshoot during fast switching, and the module supports parallel operation for scalable higher-current designs.
Typical applications include industrial motor drives, wind turbine converters, UPS systems, and welding equipment. The 1200V/800A class ratings make it well suited for high-power inverters and medium-voltage drive front ends.
When designing with this module, provide proper gate drive circuitry (typically +15V/-15V), snubber networks to control switching transients, and adequate heatsinking to keep junction temperature within the 150C limit.
Bộ thay thế dễ dàng lắp đặt cho FF800R12KF4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
FF800R12KF6C_B2
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
FF800R16KF6-B2
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
FF800R16KF6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
FF800R17KE3
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
FF1400R17T2P8
⚡ Đồng góiLiên hệ để biết giá
Xem tài liệu →FF800R12KF4 Tỷ lệ tối đa & tính chất điện
| Collector-Emitter Voltage (VCES) | 1200 V |
| Continuous Collector Current (IC) | 800 A |
| Configuration | Dual switch (half-bridge) with built-in diodes |
| Maximum Power Dissipation | 5000 W |
| Maximum Junction Temperature | 150 C |
| Technology | Trench-gate IGBT |
| Diode Type | Fast-recovery anti-parallel freewheeling diodes |
| Kiểu lắp đặt | Chassis mount (non surface-mount), terminals upper position |
| Hộp | High-power IGBT module, isolated baseplate |
| Parallel Operation | Supported |
| Gate Drive Voltage | +15 V / -15 V recommended |
Hướng dẫn cấu hình chân FF800R12KF4 high-power igbt module, isolated baseplate
Cấu hình chân cho FF800R12KF4 (high-power igbt module, isolated baseplate gói). Động cơ điện này có chân cổng, nguồn và đầu ra. Đối với các gói không phân極, tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết hướng dẫn chính xác của chân 1 và chi tiết về vân footprint. Các ứng dụng phổ biến bao gồm thiết kế nguồn cung cấp điện, điều khiển động cơ và chuyển đổi tải.
Không có dữ liệu chân cụ thể sẵn có cho FF800R12KF4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Khu vực hoạt động an toàn
Ứng dụng tiêu biểu
FF800R12KF4 phù hợp cho 6 Áp dụngs: Industrial Motor Drives, Wind Turbine Converters, UPS Systems, Welding Equipment, Traction and High-Power Inverters, Solar Central Inverters.
Industrial Motor Drives
The FF800R12KF4's 1200V/800A half-bridge configuration is a direct fit for high-power industrial variable frequency drives. The integrated fast-recovery freewheeling diodes handle inductive motor current during PWM switching, while trench-gate technology lowers VCE(sat) to reduce conduction losses in continuous-duty operation. Placed in the inverter stage between the DC bus and motor phases, the module's low-inductance package limits turn-off voltage overshoot on long bus bars, and its isolated baseplate simplifies mounting to forced-air heatsinks in drive cabinets.
Được đề xuất
Wind Turbine Converters
In wind turbine grid-side and machine-side converters, the FF800R12KF4 provides rugged 1200V switching with 800A capability for megawatt-class power stages. Its 5000W dissipation rating and low thermal resistance support the high cyclic loads typical of renewable energy conversion, while parallel-capable design allows scalable converter architectures. The module's robust isolated construction withstands the harsh vibration and temperature environments of nacelle installations; thermal cycling capability and a 150C junction limit are key reliability considerations for 20-year turbine lifetimes.
Được đề xuất
UPS Systems
Large three-phase uninterruptible power supplies use the FF800R12KF4 in both the rectifier/PFC front end and the inverter output stage. The 1200V rating covers 400V-class DC bus systems with margin, and the dual-switch package halves component count per phase leg. Low switching losses from trench-gate IGBTs improve overall UPS efficiency, directly reducing operating energy costs in datacenter applications. The built-in anti-parallel diodes manage reactive load currents during battery-to-mains transfers, and the chassis-mount isolated baseplate eases integration into standard UPS power shelves.
Được đề xuất
Welding Equipment
Heavy-duty industrial welding power sources benefit from the FF800R12KF4's 800A current handling and fast-recovery diodes in high-frequency inverter topologies. Welding loads impose extreme repetitive current pulses; the module's 5000W power dissipation rating and high thermal cycling robustness address this duty. Trench-gate technology provides low saturation voltage to limit heat in high-duty-cycle welding arcs, and the low-inductance package reduces switching spikes that could degrade arc stability. Snubber design and gate-drive layout are critical to control di/dt in these applications.
Được đề xuất
Traction and High-Power Inverters
Rail traction auxiliaries and high-power industrial inverters exploit the FF800R12KF4's ability to operate with adequate thermal margin in DC-link architectures around 600-800V. The dual half-bridge arrangement directly implements one inverter phase leg, and the module supports paralleling for higher output current. Its isolated baseplate with standardized mounting suits the vibration-prone traction environment. Designers should derate for junction temperature below 150C and verify SOA with actual DC-link voltage, gate resistance, and coolant conditions using the datasheet characteristic curves.
Được đề xuất
Solar Central Inverters
Utility-scale solar central inverters operating from 800V-class strings and DC buses use FF800R12KF4-class modules in the inverter bridge. The 1200V VCES rating provides headroom over 800V bus transients, and low conduction losses maximize weighted efficiency (CEC/EMI targets) across varying irradiance levels. Fast-recovery diodes handle reactive grid current, and parallel-module scalability supports 500kW-to-multi-MW blocks. Thermal design with liquid cooling plates and regular monitoring of Tj via on-state VCE sensing are recommended for long service life.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho FF800R12KF4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | FF800R12KF6C_B2 | FF800R16KF6-B2 | FF800R17KE3 |
|---|---|---|---|---|
| Package | High-power IGBT module, isolated baseplate | Same module family - verify outline | Same module family - verify outline | Same module family - verify outline |
| Brand | Infineon | Infineon | Infineon | Infineon |
| VCES | 1200 V | 1200 V | 1600 V | 1700 V |
| Continuous Collector Current | 800 A | 800 A | 800 A | 800 A |
| Configuration | Dual switch (half-bridge) with diodes | Dual switch with diodes | Dual switch with diodes | Dual switch with diodes |
| Chip Generation | KF4 trench-gate | KF6C (newer) | KF6 | E3 |
Bảo phân biệt quan trọng
- 1200V class for standard 690V drive buses (vsFF800R17KE3)
- 5000W power dissipation rating (vsFF800R16KF6-B2)
- Parallel-operation capability (vsFF800R12KF6C_B2)
Ghi chú thiết kế
The FF800R12KF4 can dissipate up to 5000W at full rating. Calculate junction temperature as Tj = Tamb + Ptotal * (RthJC + RthCH + Rth heatsink-to-ambient) using datasheet thermal values. For continuous high-load duty (motor drives, wind converters), liquid cooling or large forced-air heatsinks are typically mandatory. Keep Tj well below the 150C maximum - every 10C reduction roughly doubles module lifetime per standard power-module wear-out models.
Drive the gate with +15V for turn-on and -15V negative bias for turn-off. Negative bias is essential in half-bridge operation to prevent Miller-induced parasitic turn-on during high dv/dt switching of the complementary device. Size the gate resistor to balance switching loss against EMI and di/dt limits, and route gate traces with low inductance, twisted with the emitter Kelvin return where the package provides auxiliary emitter terminals.
Do not exceed the 1200V VCES rating: DC-link overshoot during short-circuit turn-off can exceed bus voltage substantially. Include DC-link snubbers or minimize bus inductance with laminated busbar design, and verify turn-off overvoltage at maximum load current. Also confirm mechanical compatibility (terminal position is upper, chassis mount, not surface mount) before substituting other 800A-class modules - outlines differ across generations.
Thông tin tuân thủ
Compliance status not present in retrieved data; verify against Infineon product page and certificate of compliance.
