Memory pricing is moving daily — on-site prices may lag behind the market. Please submit an RFQ for the up-to-the-minute quotation.
Request Latest Price →
HMCG78MEBRA113N - 16GB DDR5-4800 ECC RDIMM | SK hynix HMCG78MEBRA113N bởi SK hynix - thành phần điện tử
SK hynix

HMCG78MEBRA113N - 16GB DDR5-4800 ECC RDIMM | SK hynix

MPN: HMCG78MEBRA113N ✓ Hoạt động
1.1 V Vdss 4400 MT/s Speed DDR5 SDRAM Memory
Yêu cầu báo giá
MOQ: 1 |
Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

HMCG78MEBRA113N Tóm tắt

The SK hynix HMCG78MEBRA113N is a 16GB DDR5 ECC Registered DIMM (RDIMM) memory module operating at 4800 MT/s (PC5-38400) with CL40 latency at 1.1V, in a 288-pin DIMM form factor with a 1Rx8 (single rank, x8) organization.

A registered (buffered) DIMM is a server-class memory module that places a register between the DRAM arrays and the memory controller, reducing electrical load on the command/address lines and enabling higher module counts per channel than unbuffered desktop UDIMMs. RDIMMs sit within the memory module hierarchy (DRAM IC -> module -> registered DIMM -> enterprise memory subsystem) and are the standard memory type for servers and workstations, distinguishing them from unregistered ECC SODIMMs and consumer UDIMMs.

Key features of the HMCG78MEBRA113N include its 16GB capacity per module, 4800 MT/s data rate certified as PC5-38400, and on-module ECC registered architecture that corrects single-bit memory errors for data integrity in always-on enterprise systems. The 1.1V operating voltage follows the JEDEC DDR5 standard, delivering lower power per bit transferred than DDR4 RDIMMs of equivalent capacity. The 1Rx8 single-rank organization keeps command scheduling simple for the memory controller and suits dense multi-DIMM-per-channel server boards.

Technically, the module uses DDR5 DRAM devices with on-die ECC and a side-band management interface, and the register/buffer logic decouples command/address signaling so the module meets JEDEC DDR5 RDIMM timing at 4800 MT/s with CL40 (40-40-40 typical JEDEC scaling). Backward compatibility to 4400 MT/s is supported on platforms whose memory controllers negotiate lower speeds.

Typical applications include enterprise servers based on Intel Xeon Scalable 4th/5th Gen and AMD EPYC processors, such as HPE ProLiant Gen10+/Gen11, Dell PowerEdge 16G series, and Lenovo ThinkSystem platforms, as well as virtualization hosts and data-intensive workloads where ECC protection is mandatory.

When designing or configuring systems, populate DIMM slots per the server vendor's population rules for single-rank RDIMMs and confirm that the platform BIOS supports 4800 MT/s; otherwise the module will downclock gracefully to the highest mutually supported JEDEC speed.

This page synthesizes distributor pricing, stock data, drop-in alternative module numbers, and platform compatibility notes not found in a single manufacturer datasheet.

Bộ thay thế dễ dàng lắp đặt cho HMCG78MEBRA113N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với HMCG78MEBRA113N (cùng hình factor và footprint) — khác nhau ở Memory Type, Data Rate, Form Factor, Operating Voltage, CAS Latency.

SK hynix
Data Rate: 6400 MT/s
CAS Latency: CL52
So sánh với HMCG78MEBRA113N →
SK hynix
Memory Type: DDR5 SDRAM CSODIMM
Data Rate: 6400 MT/s (DDR5-6400)
Form Factor: CSODIMM (Clocked SODIMM)
So sánh với HMCG78MEBRA113N →
SK hynix
Memory Type: DDR5 SDRAM RDIMM
Form Factor: 288-pin RDIMM (SDP-RDIMM)
So sánh với HMCG78MEBRA113N →

HMCG78MEBRA107N

✅ Drop-In
📦 288-pin RDIMM
same 16GB DDR5-4800 1Rx8 RDIMM; SPD/sub-lot revision suffix differs only

📋 Tham chiếu thay thế (không có trong danh mục)

HMCG78MEBRA115N

✅ Drop-In
📦 288-pin RDIMM
same 16GB DDR5-4800 1Rx8 RDIMM; alternate Hynix lot code suffix

📋 Tham chiếu thay thế (không có trong danh mục)

HMCG78MEBRA174N

✅ Drop-In
📦 288-pin RDIMM
same 16GB DDR5-4800 1Rx8 RDIMM; alternate Hynix lot code suffix

📋 Tham chiếu thay thế (không có trong danh mục)

HMCG88MEBRA113N

✅ Drop-In
📦 288-pin RDIMM
32GB vs 16GB capacity (2x per slot); same 4800 MT/s DDR5 RDIMM, same SDP-RDIMM package

📋 Tham chiếu thay thế (không có trong danh mục)

HMCG88MEBRA115N

✅ Drop-In
📦 288-pin RDIMM
32GB vs 16GB capacity; same 4800 MT/s DDR5 RDIMM architecture

📋 Tham chiếu thay thế (không có trong danh mục)

HMCG78MEBRA113N Tỷ lệ tối đa & tính chất điện

Kiểu bộ nhớ DDR5 SDRAM
Module Type 288-Pin ECC Registered DIMM (RDIMM)
Capacity 16 GB
Tốc độ dữ liệu 4800 MT/s (PC5-38400)
Latency CAS CL40
Rank x Organization 1Rx8 (Single Rank, x8)
Operating Voltage 1.1 V
ECC Yes (Registered, ECC)
Số chân 288
Form Factor RDIMM (288-pin)
Compatible Platforms HPE ProLiant Gen10+/Gen11, Dell PowerEdge 16G, Lenovo ThinkSystem (Intel Xeon Scalable 4th/5th Gen, AMD EPYC)
Backward Speed Compatibility 4400 MT/s
Packaging Bulk

Hướng dẫn cấu hình chân HMCG78MEBRA113N standard

Cấu hình chân cho HMCG78MEBRA113N (standard gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân standard cho HMCG78MEBRA113N

Không có dữ liệu chân cụ thể sẵn có cho HMCG78MEBRA113N.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

HMCG78MEBRA113N phù hợp cho 6 Áp dụngs: Enterprise Server Memory, Virtualization Hosts, Data Center Memory Upgrades, Workstations, In-Memory Databases, Network Appliance and Storage Controllers.

🖥️

Enterprise Server Memory

The HMCG78MEBRA113N is purpose-built for enterprise server memory channels on Intel Xeon Scalable 4th/5th Gen and AMD EPYC platforms. Its 4800 MT/s data rate delivers 38.4 GB/s per module (PC5-38400), while the ECC Registered architecture keeps command/address loading low enough for 8 DIMMs per channel - a requirement unbuffered modules cannot meet. The 1Rx8 single-rank design simplifies memory-controller training and supports homogeneous populations per vendor guidelines. Deployed in HPE ProLiant Gen10+/Gen11 and Dell PowerEdge 16G chassis, the 1.1V rail keeps per-module power low so dense 2U systems stay within thermal budgets while providing full DDR5 bandwidth for virtualization and database workloads.

Được đề xuất

HMCG88MEBRA113N (32GB sibling RDIMM for higher-density channels) HMCG78MEBRA107N (equivalent 16GB RDIMM for homogeneous banks)
🏭

Virtualization Hosts

Virtualization platforms such as VMware ESXi and KVM hosts benefit directly from the HMCG78MEBRA113N's combination of ECC protection and 4800 MT/s bandwidth. Hypervisors randomize memory access across many VMs, increasing the exposure window for soft errors; the module's registered ECC corrects single-bit faults before they corrupt guest state, sustaining months of uptime. Its 16GB granularity matches typical per-VM allocations (4-16GB), letting administrators populate 256GB-class hosts with predictable rank interleaving. Because RDIMMs are mandatory on Xeon Scalable and EPYC server boards, this module slots directly into standard virtualization reference configurations from HPE, Dell, and Lenovo without firmware customization.

Được đề xuất

HMCG78MEBRA115N (equivalent RDIMM for capacity expansion) HMCG78MEBRA174N (equivalent RDIMM for capacity expansion)
🖥️

Data Center Memory Upgrades

For data center fleet-wide refresh programs, the HMCG78MEBRA113N offers a proven, JEDEC-standard 16GB DDR5-4800 RDIMM with over 36,000 pieces of distributor stock reported as of mid-2026, minimizing deployment risk across hundreds of servers. Modules sourced in bulk (288-pin, 1.1V, PC5-38400) keep spare-part inventories homogeneous, simplifying RMA handling. Third-party compatibility lists (NEMIX, A-Tech) document drop-in interchange with sibling Hynix suffixes (107N/115N/174N), giving procurement teams multiple sourcing lines for the same BOM position. The module's automatic downclock to 4400 MT/s protects mixed-generation fleets where older BIOS builds have not yet enabled the 4800 speed bin.

Được đề xuất

HMCG78MEBRA107N (second-source suffix for bulk procurement) HMCG88MEBRA115N (32GB variant for slot-constrained upgrades)
🔧

Workstations

High-end workstations built on Xeon W and Threadripper PRO platforms that accept registered DDR5 DIMMs can use the HMCG78MEBRA113N for ECC-protected content creation, CAD, and simulation workloads. Its 4800 MT/s transfer rate feeds memory-bandwidth-hungry rendering and finite-element solvers, while ECC prevents silent bit flips that would otherwise invalidate multi-hour compute jobs. The 16GB 1Rx8 configuration allows incremental capacity builds (16/32/64GB stations) with predictable thermal behavior at 1.1V in compact chassis with limited airflow. Buyers should confirm the workstation QVL lists 4800-capable RDIMM bins; otherwise the module downclocks to the platform's supported speed, retaining full ECC functionality.

Được đề xuất

HMCG78MEBRA115N (capacity-matched companion module) HMCG88MEBRA113N (32GB upgrade path for same slot)
🖥️

In-Memory Databases

In-memory database engines (SAP HANA-class, Redis Enterprise, AnalyticDB workloads) are sensitive to both capacity density and data integrity, making the HMCG78MEBRA113N a fit for mid-tier nodes. The module's 38.4 GB/s per-DIMM bandwidth at 4800 MT/s supports column-scan acceleration, while RDIMM ECC plus DDR5 on-die ECC protects the working set from the soft-error rates that scale with DRAM density and uptime. Its single-rank 1Rx8 organization lets database servers populate high DIMM counts per channel with stable signal timing at 1.1V. For HANA-certified servers from HPE and Lenovo, this module family commonly appears on the vendor memory QVLs for 16GB expansion positions.

Được đề xuất

HMCG78MEBRA174N (equivalent RDIMM for identical banks) HMCG88MEBRA113N (32GB variant for capacity-dense nodes)
🌐

Network Appliance and Storage Controllers

Storage controllers and network appliances (SAN heads, NVMe-oF gateways, firewall appliances) built on server-class Xeon or EPYC SoCs require RDIMMs, and the HMCG78MEBRA113N's 16GB 1Rx8 configuration suits the moderate-capacity, high-reliability profile of these embedded server designs. ECC Registered operation protects packet buffers and metadata caches against bit errors during 24/7 operation, and the 4800 MT/s rate keeps line-rate packet processing supplied with descriptor rings and flow tables. Appliance OEMs also value the module's documented interchange with sibling Hynix suffixes (107N/115N/174N) for multi-year supply continuity, and its 1.1V operation relaxes the power budget of passively cooled 1U enclosures.

Được đề xuất

HMCG78MEBRA107N (second-source suffix for OEM supply) HMCG78MEBRA115N (second-source suffix for OEM supply)

Tóm tắt các sản phẩm được đề xuất

HMCG88MEBRA113N 32GB sibling RDIMM for higher-density channels Được sử dụng trong: Enterprise Server Memory, Workstations, In-Memory Databases HMCG78MEBRA107N equivalent 16GB RDIMM for homogeneous banks Được sử dụng trong: Enterprise Server Memory, Data Center Memory Upgrades, Network Appliance and Storage Controllers HMCG78MEBRA115N equivalent RDIMM for capacity expansion Được sử dụng trong: Virtualization Hosts, Workstations, Network Appliance and Storage Controllers HMCG78MEBRA174N equivalent RDIMM for capacity expansion Được sử dụng trong: Virtualization Hosts, In-Memory Databases HMCG88MEBRA115N 32GB variant for slot-constrained upgrades Được sử dụng trong: Data Center Memory Upgrades
What is the SK hynix HMCG78MEBRA113N?
The SK hynix HMCG78MEBRA113N is a 16GB DDR5 ECC Registered DIMM (RDIMM) running at 4800 MT/s (PC5-38400) with CL40 latency at 1.1V on a 288-pin form factor. It uses a 1Rx8 single-rank organization and is intended for enterprise servers and workstations such as HPE ProLiant, Dell PowerEdge 16G, and Lenovo ThinkSystem platforms based on Intel Xeon Scalable and AMD EPYC processors.
Is HMCG78MEBRA113N compatible with my server?
The HMCG78MEBRA113N works in servers that accept 288-pin DDR5 RDIMMs and support 4800 MT/s or lower JEDEC speeds. Confirmed platform families include HPE ProLiant Gen10+/Gen11, Dell PowerEdge 16G series, and Lenovo ThinkSystem servers with Intel Xeon Scalable 4th/5th Gen or AMD EPYC processors. It is not compatible with desktop UDIMM slots or DDR4-only systems. On platforms limited to 4400 MT/s, the module downclocks automatically. Always verify your motherboard's qualified vendor list before ordering.
What is the price of HMCG78MEBRA113N?
As of 2026-09-05, the HMCG78MEBRA113N is offered on XAIPART at approximately $118.00 for a single unit, with volume breaks at roughly $112.50 (10 pcs), $106.00 (100 pcs), $99.50 (500 pcs), and $94.00 (1000 pcs). Distributor stock has been reported at over 36,000 pieces (Octopart, updated Jul 13, 2026), which generally keeps pricing stable. Request a quote on XAIPART for current volume pricing and availability.
What is the difference between HMCG78MEBRA113N and HMCG88MEBRA113N?
The core difference is capacity: the HMCG78MEBRA113N is a 16GB DDR5-4800 RDIMM, while the HMCG88MEBRA113N is a 32GB DDR5-4800 RDIMM from the same SK hynix family at the same 4800 MT/s data rate and same SDP-RDIMM package style. Both fit the same 288-pin DDR5 RDIMM slots, but the 32GB module doubles density per slot, affecting maximum memory per channel and mixed-population rules. Check your server BIOS population guidelines before mixing 16GB and 32GB modules in one channel.
What is the best drop-in replacement for HMCG78MEBRA113N?
The best drop-in replacements are same-family SK hynix modules verified by third-party compatibility testing: HMCG78MEBRA107N, HMCG78MEBRA115N, and HMCG78MEBRA174N - all 16GB DDR5-4800 (PC5-38400) ECC Registered 1Rx8 288-pin RDIMMs that are JEDEC-compliant and pin-compatible. Distributors such as NEMIX RAM explicitly list these Hynix part numbers as interchangeable server memory upgrades. Any of these can be swapped onto the same DIMM slot without BIOS or firmware changes on qualifying platforms.
Where can I buy HMCG78MEBRA113N online?
You can buy the HMCG78MEBRA113N from XAIPART by requesting a quote on this page. It is also listed on distributor aggregators including Octopart (36,240 pcs reported as of Jul 13, 2026), Findchips, DigiPart, Win Source, and WorldwayElec. Because this is a server module, many distributors quote via RFQ rather than fixed e-commerce pricing; XAIPART consolidates availability so you can compare lead time and unit price in one place.
Is HMCG78MEBRA113N in stock?
Yes, the HMCG78MEBRA113N has been widely available. Octopart Canada reported in stock updated on Jul 13, 2026, and the part appears as an active listing on Win Source, Findchips, and DigiPart. Stock levels fluctuate with enterprise DRAM demand, so XAIPART recommends confirming live availability via quote before committing to large deployment quantities. Lead time for in-stock distributors is typically days to two weeks depending on region.
What does 1Rx8 mean on HMCG78MEBRA113N?
1Rx8 means the module is single rank (1R) with x8 DRAM device organization. The x8 refers to each DRAM chip exposing 8 data bits, and single rank means one selectable set of DRAM chips behind the module's chip-select. Compared with dual-rank (2R) modules, single-rank RDIMMs like this 16GB part place less load on the memory channel, often allow higher speeds at high population, but provide slightly less rank interleaving parallelism for some workloads.
Can HMCG78MEBRA113N run at 4400 MT/s?
Yes. The HMCG78MEBRA113N is a PC5-38400 (4800 MT/s) module with backward compatibility to 4400 MT/s, as documented in third-party listing data (eBay/OWC replacement listings). DDR5 JEDEC SPD tables allow the memory controller to train the module at any common lower speed bin such as 4400 or 4000 MT/s. If your CPU or BIOS caps memory speed below 4800 MT/s, the module simply runs at the negotiated lower speed with relaxed timings - no configuration file changes are required.
Why does HMCG78MEBRA113N use ECC Registered architecture?
The HMCG78MEBRA113N uses ECC Registered (buffered) architecture because enterprise servers populate many DIMMs per channel. The register isolates the command/address bus from the DRAM electrical load, enabling 8 or more DIMMs per channel without signal integrity failure, while ECC corrects single-bit errors that occur over months of continuous operation. DDR5 adds on-die ECC inside the DRAM plus link ECC, further reducing soft-error-driven crashes. Consumer platforms generally cannot use RDIMMs because their memory controllers lack the registered-DIMM protocol support.
When should I choose HMCG78MEBRA113N over a 32GB RDIMM?
Choose the 16GB HMCG78MEBRA113N over a 32GB RDIMM such as the HMCG88MEBRA113N when your per-slot budget is tight, your workload fits within the channel capacity at 16GB granularity, or your server's population rules require identical single-rank modules. It is also the right pick when replacing a failed 16GB module in an existing bank to keep rank configuration homogeneous. Choose 32GB modules when you need maximum capacity per slot and have empty slots to fill.
Is HMCG78MEBRA113N the same as HMCG78MEBRA107N?
Functionally yes for most deployments: the HMCG78MEBRA113N and HMCG78MEBRA107N are both SK hynix 16GB DDR5-4800 PC5-38400 ECC Registered 1Rx8 288-pin RDIMMs, and replacement vendors (NEMIX RAM, A-Tech/Newegg) list them as mutually compatible equivalents. The trailing digits encode sub-lot/firmware-revision identifiers such as SPD revision rather than core capacity, speed, or rank. For mixed-bank upgrades, most server QVLs accept either suffix, but verify with your platform vendor's memory compatibility list for strict homogeneous populations.
What is the best Samsung or Kingston equivalent for HMCG78MEBRA113N?
Cross-brand equivalents matching 16GB DDR5-4800 ECC Registered 1Rx8 288-pin RDIMM specifications exist from Samsung, Micron, and Kingston (e.g., Kingston KTD-PE548 series class parts), and IBFusion lists equivalents from Samsung, Dell, HPE, and Lenovo on request. However, specific Samsung/Kingston MPNs were not verified in the source data for this page, so we do not enumerate a specific cross-brand MPN here. Contact XAIPART with your platform model and we will validate a cross-brand drop-in on your qualified vendor list.
Where to download HMCG78MEBRA113N datasheet PDF?
A datasheet reference for the HMCG78MEBRA113N is available via GlobalSpec's datasheet repository (datasheets.globalspec.com) linked from this page, and the Win Source product page also offers a PDF download. Note that SK hynix typically publishes module datasheets under family-level documents; the definitive pinout and SPD map live in the JEDEC DDR5 RDIMM specification plus SK hynix's module family datasheet. For the latest revision, request the official document directly through XAIPART's quote channel.
What are the key specifications of HMCG78MEBRA113N that engineers should know?
Key HMCG78MEBRA113N specifications: 16GB capacity; DDR5 SDRAM at 4800 MT/s (PC5-38400 bandwidth class); CAS latency CL40; ECC Registered DIMM (RDIMM) architecture; 1Rx8 single-rank x8 organization; 1.1V operating voltage; 288-pin DIMM form factor; backward compatible to 4400 MT/s; bulk packaging; active lifecycle status; validated for HPE ProLiant Gen10+/Gen11, Dell PowerEdge 16G, and Lenovo ThinkSystem servers on Intel Xeon Scalable 4th/5th Gen and AMD EPYC platforms.

Dữ liệu tham khảo kỹ thuật cho HMCG78MEBRA113N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the HMCG78MEBRA113N when you need a 16GB DDR5-4800 ECC Registered module for HPE ProLiant Gen10+/Gen11, Dell PowerEdge 16G, or Lenovo ThinkSystem servers, or when replacing a failed 16GB module to keep banks homogeneous. Its 1Rx8 single-rank design suits high-population channels and balanced per-slot budgeting. If you need more memory per slot and have free slots, step up to the 32GB HMCG88MEBRA113N or HMCG88MEBRA115N (same speed and package, double density, higher per-module cost). If your procurement requires alternate suffixes due to stock gaps, HMCG78MEBRA107N, HMCG78MEBRA115N, and HMCG78MEBRA174N are verified drop-in equivalents with identical electrical specifications. For cross-brand sourcing (Samsung, Micron, Kingston equivalents), confirm your platform QVL first - RDIMM SPD revision differences occasionally block homogeneous population rules. Avoid this module entirely in desktop/consumer systems, which require UDIMMs.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này HMCG78MEBRA107N HMCG78MEBRA115N HMCG78MEBRA174N HMCG88MEBRA113N HMCG88MEBRA115N
Package 288-pin DDR5 RDIMM 288-pin DDR5 RDIMM - same 288-pin DDR5 RDIMM - same 288-pin DDR5 RDIMM - same 288-pin DDR5 RDIMM - same 288-pin DDR5 RDIMM - same
Brand SK hynix SK hynix SK hynix SK hynix SK hynix SK hynix
Capacity 16 GB 16 GB 16 GB 16 GB 32 GB 32 GB
Data Rate 4800 MT/s (PC5-38400) 4800 MT/s 4800 MT/s 4800 MT/s 4800 MT/s 4800 MT/s
Memory Type / ECC DDR5 ECC Registered DDR5 ECC Registered DDR5 ECC Registered DDR5 ECC Registered DDR5 ECC Registered DDR5 ECC Registered
Operating Voltage 1.1 V 1.1 V 1.1 V 1.1 V 1.1 V 1.1 V
Packaging Bulk Bulk Bulk Bulk Bulk Bulk

Bảo phân biệt quan trọng

  • Highest per-slot value in verified family (vsHMCG88MEBRA113N)
  • Broad interchange within Hynix suffix family (vsHMCG78MEBRA107N)
  • Graceful speed fallback (vsHMCG88MEBRA115N)

Ghi chú thiết kế

Never mix RDIMMs with UDIMMs or SODIMMs, and do not install this 288-pin RDIMM in consumer desktop boards - the registered protocol will prevent POST entirely. When populating mixed capacities (16GB HMCG78MEBRA113N alongside 32GB HMCG88MEBRA113N), follow the server vendor population order (typically fill white/primary slots first per channel) and expect the channel to train at the lowest common speed. Verify BIOS is at the vendor's latest DDR5 training release to avoid early Gen11/16G memory-training bugs.

Each HMCG78MEBRA113N draws its 1.1V rail from the server's DDR VDD plane. Estimated: a fully populated 8-DIMM channel with 16GB modules at 4800 MT/s can draw roughly 5-8W per module under load, so budget approximately 40-64W per channel when sizing PSU headroom and cooling - this is an estimate, not a datasheet figure. The 1.1V JEDEC voltage (vs 1.2V for DDR4) reduces per-module power but increases current density; ensure VRM and board copper are rated for DDR5 server-class currents.

Registered DIMMs shift signal-integrity burden to the module's register, but channel training quality still depends on seating and slot hygiene. Clean DIMM slot contacts with approved electronics-grade contact cleaner if systems exhibit training failures after years in dusty data centers, and always seat by pressing both ends until the latches close fully - partial seating is the leading cause of DDR5 training errors. Confirm chassis airflow covers DIMM slots; server DIMMs at 4800 MT/s rely on forced air rather than heatsinks on this module class.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance details not stated in the provided verified web data; JEDEC-standard server DRAM modules are typically RoHS-compliant but this must be confirmed with SK hynix documentation.

Dữ liệu được xác minh vào: 2026-09-05 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

HMCG78MEBRA113N HMCG78MEBRA113N datasheet SK hynix HMCG78MEBRA113N 16GB DDR5 HMCG78MEBRA113N equivalent HMCG78MEBRA107N 16GB DDR5 4800 ECC RDIMM 1Rx8 server memory HMCG78MEBRA113N price stock buy HPE ProLiant Gen11 16GB DDR5 RDIMM compatible Dell PowerEdge 16G DDR5 4800 RDIMM 288-pin HMCG78MEBRA113N vs HMCG88MEBRA113N what is 1Rx8 DDR5 RDIMM PC5-38400 ECC registered server RAM drop-in replacement HMCG78MEBRA113N pinout 288-pin

Các bộ phận và thuật ngữ liên quan

SK hynix HMCG78MEBRA113N HMCG78MEBRA107N HMCG78MEBRA115N HMCG78MEBRA174N HMCG88MEBRA113N DDR5 SDRAM RDIMM ECC Registered DIMM PC5-38400 4800 MT/s CL40 1Rx8 288-pin DIMM JEDEC DDR5 HPE ProLiant Gen11 Dell PowerEdge 16G Lenovo ThinkSystem Intel Xeon Scalable AMD EPYC server memory module on-die ECC
Báo giá nhanh RFQ
Đội ngũ bán hàng của chúng tôi sẽ trả lời trong vòng 24 giờ
Mã sản phẩmMfrPkgSố lượngGiá mục tiêu
×
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

Giỏ hàng 0 mục
Giỏ hàng của bạn trống
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ