H5TC4G63CFR-H9A - 4Gb DDR3L SDRAM 96-FBGA | SK hynix
MPN: H5TC4G63CFR-H9A ✓ Hoạt độngH5TC4G63CFR-H9A Tóm tắt
DDR3L SDRAM is a type of synchronous dynamic random-access memory that operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by up to 20% while maintaining backward compatibility with DDR3 environments. It is part of the DDR3 memory family, which uses double data rate architecture to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is widely used in laptops, embedded systems, and networking equipment where energy efficiency is critical.
Key features include fully differential clock inputs (CK, CK), differential data strobe (DQS, DQS), and an on-chip DLL that aligns DQ, DQS, and DQS transitions with CK transitions. The DM (data mask) function masks write data at both rising and falling edges, ensuring data integrity. The device supports burst lengths of 8 and 4 (with burst chop), and features programmable CAS latency and additive latency for flexible timing.
The H5TC4G63CFR-H9A is designed for high-bandwidth, low-power main memory applications. Its 4Gb density and x16 organization make it ideal for applications requiring large memory capacity with a moderate bus width. The 96-ball TFBGA package offers excellent thermal and electrical performance, with a ball pitch of 0.8mm, facilitating high-density PCB layouts.
Typical applications include laptops and ultrabooks, embedded computing, networking switches and routers, and industrial automation systems. The low operating voltage and high bandwidth make it suitable for battery-powered devices and energy-conscious designs.
When designing with this component, ensure proper decoupling capacitors are placed near the VDD and VDDQ pins to minimize noise. The device requires a stable 1.35V supply and careful signal integrity management for the high-speed data bus. Refer to the datasheet for detailed timing parameters and PCB layout guidelines.
Bộ thay thế dễ dàng lắp đặt cho H5TC4G63CFR-H9A — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với H5TC4G63CFR-H9A (cùng hình factor và footprint) — khác nhau ở Package, Burst Length, Supply Voltage, CAS Latency, Data Rate.
H5TC4G63AFR-H9A
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →H5TC4G63CFR-H9I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →H5TC4G63CFR-H9J
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →K4B4G1646E-BYK0
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MT41K256M16HA-125
✅ Drop-In ⚠️ Thông số chưa được xác minh✗ Hết hàng
$6.3636 / Đơn vị
Xem tài liệu →IS43TR16256AL-125KBL
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →H5TC4G63CFR-H9A Tỷ lệ tối đa & tính chất điện
| Kiểu bộ nhớ | DDR3L SDRAM |
| Memory Density | 4Gb (4294967296 bit) |
| Tổ chức | 256M x 16 |
| Supply Voltage (VDD) | 1.35V + 0.100 / - 0.067V |
| Supply Voltage (VDDQ) | 1.35V + 0.100 / - 0.067V |
| Hộp | 96-ball TFBGA |
| Number of Terminals | 96 |
| Package Shape | RECTANGULAR |
| Trạng thái RoHS | Compliant |
| Lead-Free | Yes |
| Đông trùng haogen | Yes |
| Burst Length | 8, 4 (with burst chop) |
| Differential Clock Inputs | Yes (CK, CK) |
| Differential Data Strobe | Yes (DQS, DQS) |
| On-Chip DLL | Yes |
| DM (Data Mask) | Yes |
Cấu hình chân H5TC4G63CFR-H9A
| Chân A1 | VDD — Power supply |
| Chân A2 | DQ0 — Data input/output 0 |
| Chân A3 | DQ1 — Data input/output 1 |
| Chân A4 | VSS — Ground |
| Chân A5 | DQ2 — Data input/output 2 |
| Chân A6 | DQ3 — Data input/output 3 |
| Chân A7 | VDDQ — Power supply for output |
| Chân A8 | DQ4 — Data input/output 4 |
| Chân A9 | DQ5 — Data input/output 5 |
| Chân A10 | VSS — Ground |
| Chân A11 | DQ6 — Data input/output 6 |
| Chân A12 | DQ7 — Data input/output 7 |
| Chân B1 | VSS — Ground |
| Chân B2 | DQ8 — Data input/output 8 |
| Chân B3 | DQ9 — Data input/output 9 |
| Chân B4 | VDD — Power supply |
| Chân B5 | DQ10 — Data input/output 10 |
| Chân B6 | DQ11 — Data input/output 11 |
| Chân B7 | VSS — Ground |
| Chân B8 | DQ12 — Data input/output 12 |
| Chân B9 | DQ13 — Data input/output 13 |
| Chân B10 | VDDQ — Power supply for output |
| Chân B11 | DQ14 — Data input/output 14 |
| Chân B12 | DQ15 — Data input/output 15 |
| Chân C1 | VDDQ — Power supply for output |
| Chân C2 | VSS — Ground |
| Chân C3 | VDD — Power supply |
| Chân C4 | VSS — Ground |
| Chân C5 | VDDQ — Power supply for output |
| Chân C6 | VSS — Ground |
| Chân C7 | VDD — Power supply |
| Chân C8 | VSS — Ground |
| Chân C9 | VDDQ — Power supply for output |
| Chân C10 | VSS — Ground |
| Chân C11 | VDD — Power supply |
| Chân C12 | VSS — Ground |
| Chân D1 | CK — Clock input |
| Chân D2 | CK — Complementary clock input |
| Chân D3 | VSS — Ground |
| Chân D4 | CKE — Clock enable |
| Chân D5 | VDD — Power supply |
| Chân D6 | VSS — Ground |
| Chân D7 | VDDQ — Power supply for output |
| Chân D8 | VSS — Ground |
| Chân D9 | VDD — Power supply |
| Chân D10 | VSS — Ground |
| Chân D11 | VDDQ — Power supply for output |
| Chân D12 | VSS — Ground |
| Chân E1 | RAS — Row address strobe |
| Chân E2 | CAS — Column address strobe |
| Chân E3 | WE — Write enable |
| Chân E4 | CS — Chip select |
| Chân E5 | VDD — Power supply |
| Chân E6 | VSS — Ground |
| Chân E7 | VDDQ — Power supply for output |
| Chân E8 | VSS — Ground |
| Chân E9 | VDD — Power supply |
| Chân E10 | VSS — Ground |
| Chân E11 | VDDQ — Power supply for output |
| Chân E12 | VSS — Ground |
| Chân F1 | A0 — Address input 0 |
| Chân F2 | A1 — Address input 1 |
| Chân F3 | A2 — Address input 2 |
| Chân F4 | A3 — Address input 3 |
| Chân F5 | VDD — Power supply |
| Chân F6 | VSS — Ground |
| Chân F7 | VDDQ — Power supply for output |
| Chân F8 | VSS — Ground |
| Chân F9 | VDD — Power supply |
| Chân F10 | VSS — Ground |
| Chân F11 | VDDQ — Power supply for output |
| Chân F12 | VSS — Ground |
| Chân G1 | A4 — Address input 4 |
| Chân G2 | A5 — Address input 5 |
| Chân G3 | A6 — Address input 6 |
| Chân G4 | A7 — Address input 7 |
| Chân G5 | VDD — Power supply |
| Chân G6 | VSS — Ground |
| Chân G7 | VDDQ — Power supply for output |
| Chân G8 | VSS — Ground |
| Chân G9 | VDD — Power supply |
| Chân G10 | VSS — Ground |
| Chân G11 | VDDQ — Power supply for output |
| Chân G12 | VSS — Ground |
| Chân H1 | A8 — Address input 8 |
| Chân H2 | A9 — Address input 9 |
| Chân H3 | A10/AP — Address input 10 / Auto-precharge |
| Chân H4 | A11 — Address input 11 |
| Chân H5 | VDD — Power supply |
| Chân H6 | VSS — Ground |
| Chân H7 | VDDQ — Power supply for output |
| Chân H8 | VSS — Ground |
| Chân H9 | VDD — Power supply |
| Chân H10 | VSS — Ground |
| Chân H11 | VDDQ — Power supply for output |
| Chân H12 | VSS — Ground |
| Chân J1 | A12 — Address input 12 |
| Chân J2 | A13 — Address input 13 |
| Chân J3 | BA0 — Bank address 0 |
| Chân J4 | BA1 — Bank address 1 |
| Chân J5 | VDD — Power supply |
| Chân J6 | VSS — Ground |
| Chân J7 | VDDQ — Power supply for output |
| Chân J8 | VSS — Ground |
| Chân J9 | VDD — Power supply |
| Chân J10 | VSS — Ground |
| Chân J11 | VDDQ — Power supply for output |
| Chân J12 | VSS — Ground |
| Chân K1 | BA2 — Bank address 2 |
| Chân K2 | ODT — On-die termination |
| Chân K3 | VSS — Ground |
| Chân K4 | VDD — Power supply |
| Chân K5 | VSS — Ground |
| Chân K6 | VDDQ — Power supply for output |
| Chân K7 | VSS — Ground |
| Chân K8 | VDD — Power supply |
| Chân K9 | VSS — Ground |
| Chân K10 | VDDQ — Power supply for output |
| Chân K11 | VSS — Ground |
| Chân K12 | VDD — Power supply |
| Chân L1 | DM — Data mask |
| Chân L2 | DQS — Data strobe |
| Chân L3 | DQS — Complementary data strobe |
| Chân L4 | VSS — Ground |
| Chân L5 | VDDQ — Power supply for output |
| Chân L6 | VSS — Ground |
| Chân L7 | VDD — Power supply |
| Chân L8 | VSS — Ground |
| Chân L9 | VDDQ — Power supply for output |
| Chân L10 | VSS — Ground |
| Chân L11 | VDD — Power supply |
| Chân L12 | VSS — Ground |
| Chân M1 | VSS — Ground |
| Chân M2 | VDD — Power supply |
| Chân M3 | VSS — Ground |
| Chân M4 | VDDQ — Power supply for output |
| Chân M5 | VSS — Ground |
| Chân M6 | VDD — Power supply |
| Chân M7 | VSS — Ground |
| Chân M8 | VDDQ — Power supply for output |
| Chân M9 | VSS — Ground |
| Chân M10 | VDD — Power supply |
| Chân M11 | VSS — Ground |
| Chân M12 | VDDQ — Power supply for output |
Ứng dụng tiêu biểu
H5TC4G63CFR-H9A phù hợp cho 6 Áp dụngs: Laptops and Ultrabooks, Embedded Computing, Networking Equipment, Industrial Automation, Consumer Electronics, Networking and Communications.
Laptops and Ultrabooks
The H5TC4G63CFR-H9A is ideal for laptops and ultrabooks due to its low 1.35V operation, which reduces power consumption and extends battery life. Its 4Gb density and x16 organization provide sufficient memory capacity for mainstream computing tasks. The 96-ball TFBGA package allows for compact PCB designs, essential for thin and light form factors. With a data rate of up to 1866 Mbps (typical for DDR3L), it delivers the bandwidth needed for smooth multitasking and multimedia applications. The low operating voltage also reduces heat generation, improving thermal management in confined spaces.
Được đề xuất
Embedded Computing
In embedded systems, the H5TC4G63CFR-H9A provides high-density, low-power memory for applications such as industrial PCs, point-of-sale terminals, and medical devices. Its 1.35V supply reduces power consumption, which is critical for fanless designs. The x16 organization simplifies interfacing with embedded processors that have 16-bit memory buses. The device's support for burst lengths of 8 and 4 allows efficient data transfers, and the on-chip DLL ensures reliable timing. The 96-ball TFBGA package is suitable for automated assembly, and the RoHS compliance meets environmental regulations.
Được đề xuất
Networking Equipment
The H5TC4G63CFR-H9A is well-suited for networking switches and routers, where high bandwidth and low power are essential. Its 4Gb density allows for large packet buffers, and the x16 organization matches common network processor interfaces. The low 1.35V operation reduces power dissipation in dense line cards, improving system reliability. The differential clock and data strobe inputs ensure signal integrity at high speeds, critical for error-free data transmission. The device's RoHS compliance is important for global market access.
Được đề xuất
Industrial Automation
In industrial automation, the H5TC4G63CFR-H9A provides reliable memory for PLCs, robotics controllers, and HMI systems. Its wide operating temperature range (if specified) supports harsh environments. The low power consumption reduces heat, which is beneficial in sealed enclosures. The 96-ball TFBGA package offers good thermal performance, and the device's high bandwidth supports real-time data processing. The RoHS compliance ensures environmental safety in industrial settings.
Được đề xuất
Consumer Electronics
The H5TC4G63CFR-H9A is used in consumer electronics such as smart TVs, set-top boxes, and gaming consoles. Its 4Gb density provides ample memory for multimedia applications, and the low 1.35V operation reduces power consumption, which is important for energy-efficient devices. The x16 organization is compatible with many SoCs, and the compact TFBGA package allows for slim product designs. The device's high bandwidth supports smooth video playback and responsive user interfaces.
Được đề xuất
Networking and Communications
The H5TC4G63CFR-H9A is also used in communication infrastructure such as base stations and network appliances. Its high density and low power make it suitable for buffer memory in packet processing. The differential signaling ensures reliable operation at high frequencies, and the on-chip DLL helps maintain timing accuracy. The device's RoHS compliance is essential for global deployment. The 96-ball TFBGA package is suitable for high-density PCB designs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho H5TC4G63CFR-H9A — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | H5TC4G63AFR-H9A | H5TC4G63CFR-H9I | H5TC4G63CFR-H9J | K4B4G1646E-BYK0 | MT41K256M16HA-125 | IS43TR16256AL-125KBL |
|---|---|---|---|---|---|---|---|
| Package | 96-ball TFBGA | 96-ball TFBGA | 96-ball TFBGA | 96-ball TFBGA | 96-ball FBGA | 96-ball FBGA | 96-ball TFBGA |
| Brand | SK hynix | SK hynix | SK hynix | SK hynix | Samsung | Micron | ISSI |
| Memory Density | 4Gb | 4Gb | 4Gb | 4Gb | 4Gb | 4Gb | 4Gb |
| Organization | 256M x 16 | 256M x 16 | 256M x 16 | 256M x 16 | 256M x 16 | 256M x 16 | 256M x 16 |
| Supply Voltage | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V |
| RoHS Compliant | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Speed Grade | H9A (1866 Mbps) | H9A (1866 Mbps) | H9I (1600 Mbps) | H9J (1333 Mbps) | BYK0 (1866 Mbps) | -125 (1600 Mbps) | -125 (1600 Mbps) |
| Data Rate | 1866 Mbps | 1866 Mbps | 1600 Mbps | 1333 Mbps | 1866 Mbps | 1600 Mbps | 1600 Mbps |
Bảo phân biệt quan trọng
- Low power consumption (vsK4B4G1646E-BYK0)
- High speed grade (vsMT41K256M16HA-125)
- Same-brand availability (vsIS43TR16256AL-125KBL)
Ghi chú thiết kế
Ensure stable 1.35V supply for VDD and VDDQ. Use low-ESR decoupling capacitors (e.g., 0.1uF and 1uF) placed close to each power pin to minimize noise. The tolerance is +0.100V / -0.067V, so a well-regulated supply is critical. Consider using a dedicated DDR3L power solution to maintain voltage accuracy under load transients.
For high-speed DDR3L signals, maintain controlled impedance (typically 50 ohms single-ended, 100 ohms differential) and keep trace lengths matched within 50 mils. Place the device close to the controller to minimize stub effects. Use ground planes to provide a return path and reduce EMI. Follow the layout guidelines in the SK hynix datasheet for optimal signal integrity.
The H5TC4G63CFR-H9A in a 96-ball TFBGA package has a thermal resistance that depends on PCB design. Ensure adequate thermal vias and copper pour under the package to dissipate heat. The device's low 1.35V operation reduces power dissipation, but in high-density systems, monitor junction temperature to stay within the specified operating range.
Thông tin tuân thủ
RoHS compliant and lead-free/halogen-free per datasheet. REACH and conflict minerals status not specified in provided data.
