ICS501MIT - 140MHz PLL Clock Generator | Renesas Electronics
MPN: ICS501MIT ✓ Hoạt độngICS501MIT Tóm tắt
A clock generator is a timing IC that converts a stable reference into a usable clock signal for digital circuitry. Clock generators occupy the clock and timing branch of semiconductor devices and can incorporate a phase-locked loop, frequency multiplication, programmable dividers, and output drivers. The ICS501 family is based on the LOCO concept, intended to replace a discrete crystal oscillator in many electronic systems while retaining a compact integrated implementation.
The ICS501MIT combines a maximum frequency of 140 MHz with CMOS output, PLL capability, and a 3.00 V to 5.25 V operating supply range. Its input may be a crystal or clock signal, and its nominal input-to-output ratio is 1:1. These characteristics suit digital systems that require a local timing reference without accepting the component count and assembly complexity of a discrete oscillator arrangement.
At its core, the integrated PLL locks the generated output to the selected reference. Clock feedback and phase comparison allow the output frequency to remain associated with the reference while the device provides a clean CMOS clock to digital logic. Because the available data identifies a single clock generator circuit rather than multiple independently programmable outputs, the device is best treated as a focused timing solution rather than a multi-channel clock-tree component.
Typical applications include communications equipment, industrial control systems, test and measurement instruments, embedded digital platforms, and general-purpose logic designs. It is particularly appropriate when the design needs a 140 MHz-capable CMOS clock, an integrated PLL, and an 8-pin surface-mount footprint. The package also permits economical PCB assembly using standard SOIC-8 manufacturing practices.
Designers should select the crystal or reference frequency so that the resulting clock remains within the 140 MHz maximum and verify the input, output, and supply timing requirements against the manufacturer datasheet. Decoupling should be placed close to the supply pin, while clock routing should preserve a short return path and minimize coupling into sensitive analog or high-speed digital nets.
This product page combines the ICS501MIT operating envelope, pin-compatible replacement findings, package information, and practical implementation guidance to support initial design review, sourcing, and board-level validation.
Bộ thay thế dễ dàng lắp đặt cho ICS501MIT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
501MLF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
501MILF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ICS501MIT Thông số kỹ thuật
| Product Type | Single-channel CMOS PLL clock generator |
| Maximum Output Frequency | 140 MHz |
| Minimum Operating Supply Voltage | 3.00 V |
| Maximum Operating Supply Voltage | 5.25 V |
| Input Type | Crystal or clock input |
| Kiểu đầu ra | CMOS |
| PLL | Yes |
| Number of Circuits | 1 |
| Input-to-Output Ratio | 1:1 |
| Differential Input | No |
| Differential Output | No |
| Hộp | 8-pin SOIC, 3.90 mm width |
| Kiểu lắp đặt | Surface mount |
| Shipping Package | Tape and reel |
| Oscillator Technology | LOCO PLL clock generation |
Hướng dẫn cấu hình chân ICS501MIT tape and reel
Cấu hình chân cho ICS501MIT (tape and reel gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho ICS501MIT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ICS501MIT phù hợp cho 6 Áp dụngs: Industrial Control Systems, Communications Equipment, Test and Measurement Instruments, Embedded Digital Platforms, Server and Storage Interfaces, General-Purpose Digital Logic.
Industrial Control Systems
ICS501MIT fits industrial control boards that need a compact, stable CMOS timing reference for processors, counters, data converters, and communication interfaces. Its integrated PLL provides up to 140 MHz clock capability from a lower-frequency crystal or clock input, while the 1:1 ratio simplifies reference planning. The 8-pin SOIC package reduces board area and supports conventional surface-mount assembly. Designers operating from 3.00 V to 5.25 V can use the same device across common industrial logic levels, provided the selected reference frequency and output timing meet the downstream controller requirements.
Được đề xuất
Communications Equipment
ICS501MIT is suitable for communications equipment requiring a local CMOS clock for digital logic, serial interfaces, or data-processing sections. Its PLL-based clock generation can produce a high-quality timing signal from a lower-frequency reference, with operation up to 140 MHz. The single-ended CMOS output and 1:1 input-to-output ratio are appropriate for systems that do not require differential clocking. In a multi-layer design, place the device near the clock-consuming circuitry, provide short supply connections, and maintain a controlled return path to reduce coupling into sensitive receiver channels.
Được đề xuất
Test and Measurement Instruments
ICS501MIT can serve as the local reference generator inside test and measurement instruments that synchronize acquisition, control, display, or communications subsystems. A 140 MHz maximum output frequency provides useful margin for high-speed digital sections, while the PLL allows the system clock to be derived from a lower-frequency reference. The 3.00 V to 5.25 V operating range supports integration with mixed logic voltage sections. For accurate measurements, preserve short clock routes, avoid unnecessary stubs, and verify jitter and frequency stability against the instrument's acquisition requirements before production release.
Được đề xuất
Embedded Digital Platforms
ICS501MIT is appropriate for embedded platforms that require a dedicated clock-generator IC alongside a controller or programmable logic device. Its single PLL channel, crystal-or-clock input, and CMOS output provide a focused timing solution without requiring a multi-output clock tree. The 8-pin SOIC footprint is especially useful when the board already uses surface-mount logic and needs only one principal clock domain. Ensure the reference source matches the 1:1 input-to-output relationship, and review power-up behavior and output stability against the controller's initialization sequence.
Được đề xuất
Server and Storage Interfaces
ICS501MIT may be used in server, storage, and peripheral interface boards for local synchronization of digital subsystems that operate below the 140 MHz device limit. The PLL-based architecture allows a lower-frequency reference to support a high-quality CMOS clock, and the single-ended output fits conventional logic interfaces. Because the clock's quality directly affects bus timing margins, route it away from high-current switching nodes and provide uninterrupted ground return. Confirm reference accuracy, startup timing, and load-dependent behavior using the Renesas 501 datasheet before using the clock across multiple domains.
Được đề xuất
General-Purpose Digital Logic
ICS501MIT is a practical choice for general-purpose digital logic boards that need a compact oscillator function alongside counters, flip-flops, memory interfaces, or programmable controllers. Its maximum frequency of 140 MHz, CMOS output, and 1:1 reference ratio cover many moderate-speed clocking needs. The 8-pin SOIC package minimizes footprint area and simplifies assembly relative to a discrete oscillator network. Layout the crystal or reference connection according to the manufacturer guidance, keep the output route short, and confirm that the supply remains within 3.00 V to 5.25 V under dynamic loading.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ICS501MIT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | 501MLF | 501MILF |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | SOIC-8 | SOIC-8 | SOIC-8 |
| Product Type | PLL clock generator | PLL clock generator | PLL clock generator |
| Maximum Output Frequency | 140 MHz | 140 MHz | 140 MHz |
| Operating Supply Range | 3.00 V to 5.25 V | 3.00 V to 5.25 V | 3.00 V to 5.25 V |
| Output Type | Single-ended CMOS | Single-ended CMOS | Single-ended CMOS |
| Input Type | Crystal or clock | Crystal or clock | Crystal or clock |
| Input-to-Output Ratio | 1:1 | 1:1 | 1:1 |
| Number of Clock Circuits | 1 | 1 | 1 |
| Differential Clocking | No | No | No |
Bảo phân biệt quan trọng
- Single-channel PLL clock generation in a compact package (vs501MLF)
- Direct PCB footprint reuse (vs501MILF)
- Integrated reference flexibility (vs501MLF)
Ghi chú thiết kế
Use the pin-description table in the Renesas 501 datasheet when assigning nets and laying out the 8-pin SOIC. Place the device close to the clock consumer, route the output as a short point-to-point trace, and avoid passing the clock beneath noisy switching circuitry. The 3.90 mm-wide SOIC footprint should be checked against the PCB land pattern and paste stencil before fabrication.
Operate ICS501MIT only within the specified 3.00 V to 5.25 V supply range. Place the required local bypass capacitor at the supply and ground pins with a short, low-inductance connection. Check supply voltage at the device under expected clock load and ensure the reference source can drive the input specified in the manufacturer datasheet.
Follow the Renesas 501 datasheet layout guidance for the crystal or external clock connection. Keep the reference network compact, maintain symmetric routing where practical, and prevent clock and feedback traces from running alongside switching-node copper. A continuous ground reference beneath and around the timing section will reduce susceptibility to common-mode noise and ground-current coupling.
Do not assume that matching the SOIC-8 footprint alone establishes interchangeability. The documented 501MLF and 501MILF alternatives have consistent terminals, packages, principal performance parameters, and functions, but the reference frequency, 1:1 ratio, supply conditions, and timing requirements must still match. Validate startup, output stability, and downstream timing margins before releasing a substitution.
Thông tin tuân thủ
Compliance status is not stated in the product information for this exact MPN. Confirm current environmental, material, and automotive qualification status with Renesas Electronics before production release.