Renesas Electronics

ICS501MIT - 140MHz PLL Clock Generator | Renesas Electronics

부품 번호: ICS501MIT ✓ 활성
3.00 V Vdss 8-pin SOIC, 3.90 mm width Package 140 MHz Speed
MOQ: 1 |

ICS501MIT 개요

Renesas Electronics ICS501MIT is a single-channel CMOS clock generator with a phase-locked loop, a maximum output frequency of 140 MHz, and an 8-pin SOIC package measuring 3.90 mm in width. It accepts either a crystal or external clock input and provides a 1:1 input-to-output ratio, making it suitable for generating a stable high-frequency clock from a lower-frequency reference.

A clock generator is a timing IC that converts a stable reference into a usable clock signal for digital circuitry. Clock generators occupy the clock and timing branch of semiconductor devices and can incorporate a phase-locked loop, frequency multiplication, programmable dividers, and output drivers. The ICS501 family is based on the LOCO concept, intended to replace a discrete crystal oscillator in many electronic systems while retaining a compact integrated implementation.

The ICS501MIT combines a maximum frequency of 140 MHz with CMOS output, PLL capability, and a 3.00 V to 5.25 V operating supply range. Its input may be a crystal or clock signal, and its nominal input-to-output ratio is 1:1. These characteristics suit digital systems that require a local timing reference without accepting the component count and assembly complexity of a discrete oscillator arrangement.

At its core, the integrated PLL locks the generated output to the selected reference. Clock feedback and phase comparison allow the output frequency to remain associated with the reference while the device provides a clean CMOS clock to digital logic. Because the available data identifies a single clock generator circuit rather than multiple independently programmable outputs, the device is best treated as a focused timing solution rather than a multi-channel clock-tree component.

Typical applications include communications equipment, industrial control systems, test and measurement instruments, embedded digital platforms, and general-purpose logic designs. It is particularly appropriate when the design needs a 140 MHz-capable CMOS clock, an integrated PLL, and an 8-pin surface-mount footprint. The package also permits economical PCB assembly using standard SOIC-8 manufacturing practices.

Designers should select the crystal or reference frequency so that the resulting clock remains within the 140 MHz maximum and verify the input, output, and supply timing requirements against the manufacturer datasheet. Decoupling should be placed close to the supply pin, while clock routing should preserve a short return path and minimize coupling into sensitive analog or high-speed digital nets.

This product page combines the ICS501MIT operating envelope, pin-compatible replacement findings, package information, and practical implementation guidance to support initial design review, sourcing, and board-level validation.

드롭인 대체품: ICS501MIT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

501MLF

✅ 드롭인
📦 SOIC-8
Ordering suffix differs, while maximum frequency remains 140 MHz, supply remains 3.00 V to 5.25 V, and pin, package, and functional differences are 0%.

📋 참조 대체품 (카탈로그에 없음)

501MILF

✅ 드롭인
📦 SOIC-8
Ordering suffix differs, while maximum frequency remains 140 MHz, supply remains 3.00 V to 5.25 V, and pin, package, and functional differences are 0%.

📋 참조 대체품 (카탈로그에 없음)

ICS501MIT 사양

Product Type Single-channel CMOS PLL clock generator
Maximum Output Frequency 140 MHz
Minimum Operating Supply Voltage 3.00 V
Maximum Operating Supply Voltage 5.25 V
Input Type Crystal or clock input
출력 유형 CMOS
PLL Yes
Number of Circuits 1
Input-to-Output Ratio 1:1
Differential Input No
Differential Output No
패키지 8-pin SOIC, 3.90 mm width
실장 유형 Surface mount
Shipping Package Tape and reel
Oscillator Technology LOCO PLL clock generation

ICS501MIT tape and reel 핀 구성 가이드

ICS501MIT(tape and reel 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ICS501MIT의 tape and reel 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ICS501MIT.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ICS501MIT 적합 용도: 6 애플리케이션s: Industrial Control Systems, Communications Equipment, Test and Measurement Instruments, Embedded Digital Platforms, Server and Storage Interfaces, General-Purpose Digital Logic.

🏭

Industrial Control Systems

ICS501MIT fits industrial control boards that need a compact, stable CMOS timing reference for processors, counters, data converters, and communication interfaces. Its integrated PLL provides up to 140 MHz clock capability from a lower-frequency crystal or clock input, while the 1:1 ratio simplifies reference planning. The 8-pin SOIC package reduces board area and supports conventional surface-mount assembly. Designers operating from 3.00 V to 5.25 V can use the same device across common industrial logic levels, provided the selected reference frequency and output timing meet the downstream controller requirements.

🌐

Communications Equipment

ICS501MIT is suitable for communications equipment requiring a local CMOS clock for digital logic, serial interfaces, or data-processing sections. Its PLL-based clock generation can produce a high-quality timing signal from a lower-frequency reference, with operation up to 140 MHz. The single-ended CMOS output and 1:1 input-to-output ratio are appropriate for systems that do not require differential clocking. In a multi-layer design, place the device near the clock-consuming circuitry, provide short supply connections, and maintain a controlled return path to reduce coupling into sensitive receiver channels.

🔧

Test and Measurement Instruments

ICS501MIT can serve as the local reference generator inside test and measurement instruments that synchronize acquisition, control, display, or communications subsystems. A 140 MHz maximum output frequency provides useful margin for high-speed digital sections, while the PLL allows the system clock to be derived from a lower-frequency reference. The 3.00 V to 5.25 V operating range supports integration with mixed logic voltage sections. For accurate measurements, preserve short clock routes, avoid unnecessary stubs, and verify jitter and frequency stability against the instrument's acquisition requirements before production release.

🧩

Embedded Digital Platforms

ICS501MIT is appropriate for embedded platforms that require a dedicated clock-generator IC alongside a controller or programmable logic device. Its single PLL channel, crystal-or-clock input, and CMOS output provide a focused timing solution without requiring a multi-output clock tree. The 8-pin SOIC footprint is especially useful when the board already uses surface-mount logic and needs only one principal clock domain. Ensure the reference source matches the 1:1 input-to-output relationship, and review power-up behavior and output stability against the controller's initialization sequence.

🖥️

Server and Storage Interfaces

ICS501MIT may be used in server, storage, and peripheral interface boards for local synchronization of digital subsystems that operate below the 140 MHz device limit. The PLL-based architecture allows a lower-frequency reference to support a high-quality CMOS clock, and the single-ended output fits conventional logic interfaces. Because the clock's quality directly affects bus timing margins, route it away from high-current switching nodes and provide uninterrupted ground return. Confirm reference accuracy, startup timing, and load-dependent behavior using the Renesas 501 datasheet before using the clock across multiple domains.

🔧

General-Purpose Digital Logic

ICS501MIT is a practical choice for general-purpose digital logic boards that need a compact oscillator function alongside counters, flip-flops, memory interfaces, or programmable controllers. Its maximum frequency of 140 MHz, CMOS output, and 1:1 reference ratio cover many moderate-speed clocking needs. The 8-pin SOIC package minimizes footprint area and simplifies assembly relative to a discrete oscillator network. Layout the crystal or reference connection according to the manufacturer guidance, keep the output route short, and confirm that the supply remains within 3.00 V to 5.25 V under dynamic loading.

추천 제품 요약

501MLF Pin-compatible clock-generator replacement 사용처: Industrial Control Systems, Communications Equipment, Test and Measurement Instruments, Embedded Digital Platforms, Server and Storage Interfaces, General-Purpose Digital Logic 501MILF Pin-compatible clock-generator replacement 사용처: Industrial Control Systems, Communications Equipment, Test and Measurement Instruments, Embedded Digital Platforms, Server and Storage Interfaces, General-Purpose Digital Logic
What is the ICS501MIT?
The ICS501MIT is a Renesas Electronics single-channel CMOS clock generator with an integrated phase-locked loop and a maximum output frequency of 140 MHz. According to the Renesas 501 datasheet, it is designed to produce a high-quality clock from a lower-frequency crystal or clock input. It is packaged in an 8-pin SOIC and operates from 3.00 V to 5.25 V.
What is the maximum frequency of ICS501MIT?
The ICS501MIT supports a maximum clock frequency of 140 MHz. The Renesas 501 datasheet identifies the device as a PLL-based clock generator, while the ICS501MIT product listing specifies the 140 MHz upper operating frequency. The actual operating point must remain compatible with the selected reference source, input ratio, supply voltage, and application timing requirements.
What clock inputs does ICS501MIT accept?
The ICS501MIT accepts either a crystal input or an external clock input. The Renesas 501 datasheet describes the LOCO architecture as a way to generate a high-quality, high-frequency clock from a lower-frequency crystal or clock source. Its specified input-to-output ratio is 1:1, and the output is single-ended CMOS rather than differential.
What is the supply voltage range of ICS501MIT?
The ICS501MIT operates from 3.00 V to 5.25 V. The manufacturer product information identifies this range for the exact MPN, and the 8-pin SOIC configuration uses a single CMOS clock-generator channel. Designers should include local supply bypassing and confirm output timing and output-level behavior at the voltage selected for the target system.
Where can I download the ICS501MIT datasheet PDF?
The official ICS501MIT datasheet is available from the Renesas Electronics 501 Datasheet page at https://www.renesas.com/document/dst/501-datasheet. This document is the appropriate starting point for pin descriptions, electrical characteristics, reference-crystal requirements, timing behavior, and application guidance because it covers the ICS501 family to which ICS501MIT belongs.
Where can I find the ICS501MIT pinout?
Use the pin-description table and package drawing in the Renesas Electronics 501 datasheet to locate the ICS501MIT pinout. ICS501MIT is packaged in an 8-pin SOIC with a 3.90 mm body width. Assign PCB nets directly from that pin-description table rather than inferring pin functions from package position, especially for the supply, ground, clock input, and clock output connections.
Can 501MLF replace ICS501MIT?
Yes, 501MLF is identified as a complete pin-compatible replacement for ICS501MIT. The manufacturer comparison describes matching terminals, package construction, principal performance parameters, and functional characteristics, allowing replacement without PCB modification. Both use the 8-pin SOIC format and provide the same 140 MHz-capable clock-generator function.
Can 501MILF replace ICS501MIT?
Yes, 501MILF is identified as a complete replacement for ICS501MIT because its terminals, package, main performance parameters, and functional characteristics are consistent. It is an 8-pin SOIC clock generator, so it can replace ICS501MIT without changing the PCB land pattern. Confirm the required reference frequency and ordering suffix before releasing a production substitution.
What is the best drop-in replacement for ICS501MIT?
The documented drop-in replacements are 501MLF and 501MILF, both identified as complete replacements with consistent pins, package, performance, and functionality. They retain the 8-pin SOIC footprint and clock-generator architecture of ICS501MIT. Because only two distinct compatible replacements were identified, engineers should verify timing, reference-source, and ordering requirements against the Renesas 501 datasheet before substitution.
What can replace ICS501MIT?
501MLF and 501MILF can replace ICS501MIT as pin-compatible 8-pin SOIC clock generators. Both are described as complete replacements with consistent terminals, package dimensions, principal performance parameters, and functional characteristics. This conclusion supports footprint reuse, but it does not remove the need to check the crystal frequency, supply conditions, and output timing in the specific target design.
Is ICS501MIT suitable for digital communication equipment?
ICS501MIT is suitable for digital systems requiring a compact, single-ended CMOS clock source with PLL capability. Its 140 MHz maximum frequency and 3.00 V to 5.25 V supply range fit many communications and industrial control designs. The 1:1 input-to-output ratio must match the selected reference arrangement, and clock distribution quality will depend on layout, loading, and downstream timing requirements.
When should I choose ICS501MIT over a discrete crystal oscillator?
Choose ICS501MIT when the design benefits from an integrated PLL clock generator in an 8-pin SOIC instead of a discrete oscillator implementation. Its stated purpose is to generate a high-quality clock from a lower-frequency crystal or clock input while replacing a crystal oscillator in many electronic systems. Confirm that the 140 MHz limit, 1:1 ratio, and 3.00 V to 5.25 V supply fit the design.
ICS501MIT vs 501MLF - which is better for a new PCB?
ICS501MIT and 501MLF provide the same documented clock-generator function in the same 8-pin SOIC footprint, with consistent terminals and principal performance characteristics. For a new PCB, choose according to lifecycle requirements, reference configuration, and ordering availability rather than a functional performance difference. The component-specific ordering code should be confirmed against the manufacturer documentation before layout release.
Is ICS501MIT in stock and what is its lead time?
Current stock and production lead time change by quantity, packaging, and market conditions, so they should be confirmed through the Request a Quote form on this page. The product is listed in the Renesas Electronics catalog and appears in distributor search results, but a listing alone does not establish present inventory. Provide the required quantity and target delivery date when requesting a quotation.
Where can I buy ICS501MIT online?
Use the Request a Quote form on this page to inquire about ICS501MIT availability, unit pricing, and order quantity. The exact MPN is listed as an 8-pin SOIC clock generator with a 140 MHz maximum frequency and a 3.00 V to 5.25 V supply range. Include reel quantity, date codes, and inspection requirements so the quotation reflects the configuration needed for manufacturing.
What are the key specifications of ICS501MIT that engineers should know?
ICS501MIT combines a 140 MHz maximum frequency, PLL capability, one CMOS clock-generator circuit, a crystal or clock input, and a 1:1 input-to-output ratio in an 8-pin SOIC package. Its operating supply range is 3.00 V to 5.25 V. The Renesas 501 datasheet identifies the LOCO function as a cost-effective way to generate a high-quality clock from a lower-frequency source.

엔지니어링 참조 데이터: ICS501MIT — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ICS501MIT for a new design that needs a single CMOS clock channel, PLL capability, and a maximum output frequency of 140 MHz in an 8-pin SOIC footprint. Choose 501MLF when its ordering configuration is preferable for procurement; the documented terminals, package, performance parameters, and functions are consistent with ICS501MIT. Choose 501MILF when that ordering option is preferred for the same reason. All three provide the same basic single-ended clock-generator architecture, so selection should emphasize lifecycle status, reference configuration, packaging, and availability rather than a meaningful electrical-performance advantage. Do not substitute based on the SOIC-8 outline alone: verify the clock input type, 1:1 ratio, 3.00 V to 5.25 V supply range, startup behavior, and downstream timing requirements in the Renesas 501 datasheet. A different clock-generator family should be considered when differential output, programmable multiplication, multiple outputs, or different reference ratios are required.

대체품과의 비교

파라미터 이 제품 501MLF 501MILF
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Package SOIC-8 SOIC-8 SOIC-8
Product Type PLL clock generator PLL clock generator PLL clock generator
Maximum Output Frequency 140 MHz 140 MHz 140 MHz
Operating Supply Range 3.00 V to 5.25 V 3.00 V to 5.25 V 3.00 V to 5.25 V
Output Type Single-ended CMOS Single-ended CMOS Single-ended CMOS
Input Type Crystal or clock Crystal or clock Crystal or clock
Input-to-Output Ratio 1:1 1:1 1:1
Number of Clock Circuits 1 1 1
Differential Clocking No No No

주요 차별점

  • Single-channel PLL clock generation in a compact package (vs 501MLF)
  • Direct PCB footprint reuse (vs 501MILF)
  • Integrated reference flexibility (vs 501MLF)

설계 노트

Use the pin-description table in the Renesas 501 datasheet when assigning nets and laying out the 8-pin SOIC. Place the device close to the clock consumer, route the output as a short point-to-point trace, and avoid passing the clock beneath noisy switching circuitry. The 3.90 mm-wide SOIC footprint should be checked against the PCB land pattern and paste stencil before fabrication.

Operate ICS501MIT only within the specified 3.00 V to 5.25 V supply range. Place the required local bypass capacitor at the supply and ground pins with a short, low-inductance connection. Check supply voltage at the device under expected clock load and ensure the reference source can drive the input specified in the manufacturer datasheet.

Follow the Renesas 501 datasheet layout guidance for the crystal or external clock connection. Keep the reference network compact, maintain symmetric routing where practical, and prevent clock and feedback traces from running alongside switching-node copper. A continuous ground reference beneath and around the timing section will reduce susceptibility to common-mode noise and ground-current coupling.

Do not assume that matching the SOIC-8 footprint alone establishes interchangeability. The documented 501MLF and 501MILF alternatives have consistent terminals, packages, principal performance parameters, and functions, but the reference frequency, 1:1 ratio, supply conditions, and timing requirements must still match. Validate startup, output stability, and downstream timing margins before releasing a substitution.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance status is not stated in the product information for this exact MPN. Confirm current environmental, material, and automotive qualification status with Renesas Electronics before production release.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ICS501MIT ICS501MIT datasheet ICS501MIT datasheet pdf ICS501MIT pinout ICS501MIT specifications ICS501MIT equivalent ICS501MIT replacement ICS501MIT cross reference ICS501MIT 140MHz clock generator ICS501MIT SOIC-8 pinout ICS501MIT price ICS501MIT stock

관련 부품 & 용어

Renesas Electronics ICS501MIT 501MLF 501MILF clock generator phase-locked loop PLL LOCO CMOS crystal oscillator single-ended clock 140 MHz clock 3.00 V to 5.25 V SOIC-8 surface mount industrial control communications equipment test and measurement embedded digital systems clock jitter input-to-output ratio
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기