ICS501MIT - 140MHz PLL Clock Generator | Renesas Electronics
料号: ICS501MIT ✓ 量产中ICS501MIT 概述
A clock generator is a timing IC that converts a stable reference into a usable clock signal for digital circuitry. Clock generators occupy the clock and timing branch of semiconductor devices and can incorporate a phase-locked loop, frequency multiplication, programmable dividers, and output drivers. The ICS501 family is based on the LOCO concept, intended to replace a discrete crystal oscillator in many electronic systems while retaining a compact integrated implementation.
The ICS501MIT combines a maximum frequency of 140 MHz with CMOS output, PLL capability, and a 3.00 V to 5.25 V operating supply range. Its input may be a crystal or clock signal, and its nominal input-to-output ratio is 1:1. These characteristics suit digital systems that require a local timing reference without accepting the component count and assembly complexity of a discrete oscillator arrangement.
At its core, the integrated PLL locks the generated output to the selected reference. Clock feedback and phase comparison allow the output frequency to remain associated with the reference while the device provides a clean CMOS clock to digital logic. Because the available data identifies a single clock generator circuit rather than multiple independently programmable outputs, the device is best treated as a focused timing solution rather than a multi-channel clock-tree component.
Typical applications include communications equipment, industrial control systems, test and measurement instruments, embedded digital platforms, and general-purpose logic designs. It is particularly appropriate when the design needs a 140 MHz-capable CMOS clock, an integrated PLL, and an 8-pin surface-mount footprint. The package also permits economical PCB assembly using standard SOIC-8 manufacturing practices.
Designers should select the crystal or reference frequency so that the resulting clock remains within the 140 MHz maximum and verify the input, output, and supply timing requirements against the manufacturer datasheet. Decoupling should be placed close to the supply pin, while clock routing should preserve a short return path and minimize coupling into sensitive analog or high-speed digital nets.
This product page combines the ICS501MIT operating envelope, pin-compatible replacement findings, package information, and practical implementation guidance to support initial design review, sourcing, and board-level validation.
直接替换替代料: ICS501MIT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
501MLF
✅ 直接替换📋 参考替代料(不在目录中)
501MILF
✅ 直接替换📋 参考替代料(不在目录中)
ICS501MIT 规格参数
| Product Type | Single-channel CMOS PLL clock generator |
| Maximum Output Frequency | 140 MHz |
| Minimum Operating Supply Voltage | 3.00 V |
| Maximum Operating Supply Voltage | 5.25 V |
| Input Type | Crystal or clock input |
| 输出类型 | CMOS |
| PLL | Yes |
| Number of Circuits | 1 |
| Input-to-Output Ratio | 1:1 |
| Differential Input | No |
| Differential Output | No |
| 封装 | 8-pin SOIC, 3.90 mm width |
| 安装类型 | Surface mount |
| Shipping Package | Tape and reel |
| Oscillator Technology | LOCO PLL clock generation |
ICS501MIT tape and reel 引脚配置指南
ICS501MIT(tape and reel 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ICS501MIT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ICS501MIT 适用于 6 应用s: Industrial Control Systems, Communications Equipment, Test and Measurement Instruments, Embedded Digital Platforms, Server and Storage Interfaces, General-Purpose Digital Logic.
Industrial Control Systems
ICS501MIT fits industrial control boards that need a compact, stable CMOS timing reference for processors, counters, data converters, and communication interfaces. Its integrated PLL provides up to 140 MHz clock capability from a lower-frequency crystal or clock input, while the 1:1 ratio simplifies reference planning. The 8-pin SOIC package reduces board area and supports conventional surface-mount assembly. Designers operating from 3.00 V to 5.25 V can use the same device across common industrial logic levels, provided the selected reference frequency and output timing meet the downstream controller requirements.
推荐
Communications Equipment
ICS501MIT is suitable for communications equipment requiring a local CMOS clock for digital logic, serial interfaces, or data-processing sections. Its PLL-based clock generation can produce a high-quality timing signal from a lower-frequency reference, with operation up to 140 MHz. The single-ended CMOS output and 1:1 input-to-output ratio are appropriate for systems that do not require differential clocking. In a multi-layer design, place the device near the clock-consuming circuitry, provide short supply connections, and maintain a controlled return path to reduce coupling into sensitive receiver channels.
推荐
Test and Measurement Instruments
ICS501MIT can serve as the local reference generator inside test and measurement instruments that synchronize acquisition, control, display, or communications subsystems. A 140 MHz maximum output frequency provides useful margin for high-speed digital sections, while the PLL allows the system clock to be derived from a lower-frequency reference. The 3.00 V to 5.25 V operating range supports integration with mixed logic voltage sections. For accurate measurements, preserve short clock routes, avoid unnecessary stubs, and verify jitter and frequency stability against the instrument's acquisition requirements before production release.
推荐
Embedded Digital Platforms
ICS501MIT is appropriate for embedded platforms that require a dedicated clock-generator IC alongside a controller or programmable logic device. Its single PLL channel, crystal-or-clock input, and CMOS output provide a focused timing solution without requiring a multi-output clock tree. The 8-pin SOIC footprint is especially useful when the board already uses surface-mount logic and needs only one principal clock domain. Ensure the reference source matches the 1:1 input-to-output relationship, and review power-up behavior and output stability against the controller's initialization sequence.
推荐
Server and Storage Interfaces
ICS501MIT may be used in server, storage, and peripheral interface boards for local synchronization of digital subsystems that operate below the 140 MHz device limit. The PLL-based architecture allows a lower-frequency reference to support a high-quality CMOS clock, and the single-ended output fits conventional logic interfaces. Because the clock's quality directly affects bus timing margins, route it away from high-current switching nodes and provide uninterrupted ground return. Confirm reference accuracy, startup timing, and load-dependent behavior using the Renesas 501 datasheet before using the clock across multiple domains.
推荐
General-Purpose Digital Logic
ICS501MIT is a practical choice for general-purpose digital logic boards that need a compact oscillator function alongside counters, flip-flops, memory interfaces, or programmable controllers. Its maximum frequency of 140 MHz, CMOS output, and 1:1 reference ratio cover many moderate-speed clocking needs. The 8-pin SOIC package minimizes footprint area and simplifies assembly relative to a discrete oscillator network. Layout the crystal or reference connection according to the manufacturer guidance, keep the output route short, and confirm that the supply remains within 3.00 V to 5.25 V under dynamic loading.
推荐
推荐产品汇总
工程参考数据: ICS501MIT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | 501MLF | 501MILF |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | SOIC-8 | SOIC-8 | SOIC-8 |
| Product Type | PLL clock generator | PLL clock generator | PLL clock generator |
| Maximum Output Frequency | 140 MHz | 140 MHz | 140 MHz |
| Operating Supply Range | 3.00 V to 5.25 V | 3.00 V to 5.25 V | 3.00 V to 5.25 V |
| Output Type | Single-ended CMOS | Single-ended CMOS | Single-ended CMOS |
| Input Type | Crystal or clock | Crystal or clock | Crystal or clock |
| Input-to-Output Ratio | 1:1 | 1:1 | 1:1 |
| Number of Clock Circuits | 1 | 1 | 1 |
| Differential Clocking | No | No | No |
关键差异点
- Single-channel PLL clock generation in a compact package (对比 501MLF)
- Direct PCB footprint reuse (对比 501MILF)
- Integrated reference flexibility (对比 501MLF)
设计说明
Use the pin-description table in the Renesas 501 datasheet when assigning nets and laying out the 8-pin SOIC. Place the device close to the clock consumer, route the output as a short point-to-point trace, and avoid passing the clock beneath noisy switching circuitry. The 3.90 mm-wide SOIC footprint should be checked against the PCB land pattern and paste stencil before fabrication.
Operate ICS501MIT only within the specified 3.00 V to 5.25 V supply range. Place the required local bypass capacitor at the supply and ground pins with a short, low-inductance connection. Check supply voltage at the device under expected clock load and ensure the reference source can drive the input specified in the manufacturer datasheet.
Follow the Renesas 501 datasheet layout guidance for the crystal or external clock connection. Keep the reference network compact, maintain symmetric routing where practical, and prevent clock and feedback traces from running alongside switching-node copper. A continuous ground reference beneath and around the timing section will reduce susceptibility to common-mode noise and ground-current coupling.
Do not assume that matching the SOIC-8 footprint alone establishes interchangeability. The documented 501MLF and 501MILF alternatives have consistent terminals, packages, principal performance parameters, and functions, but the reference frequency, 1:1 ratio, supply conditions, and timing requirements must still match. Validate startup, output stability, and downstream timing margins before releasing a substitution.
合规信息
Compliance status is not stated in the product information for this exact MPN. Confirm current environmental, material, and automotive qualification status with Renesas Electronics before production release.