K4A8G085WB-BCRC - 8Gb DDR4 SDRAM 2400Mbps 1.2V | Samsung
MPN: K4A8G085WB-BCRC ✓ Hoạt động| Số lượng | Giá đơn vị | Phụ |
|---|---|---|
| 1 | $47.8125 | $47,81 |
| 10 | $34.5313 | $345,31 |
| 100 | $30.5469 | $3.054,69 |
| 500 | $29.2188 | $14.609,40 |
| 1.000 | $27.8906 | $27.890,60 |
K4A8G085WB-BCRC Tóm tắt
DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random Access Memory) is the fourth generation of the JEDEC DDR DRAM family, sitting within the memory hierarchy of volatile semiconductor memory. Compared with DDR3, DDR4 lowers the core supply voltage from 1.5V to 1.2V - roughly 25% lower power consumption per Samsung - and increases bank counts, bank groups, and data rates up to 3200 Mbps, making it the dominant main-memory technology in servers, workstations, and embedded controllers.
Key features of the K4A8G085WB-BCRC include 8Gbit density in a x8 organization, 2400 Mbps (DDR4-2400, CL17-class timing, 0.175 ns characteristic CK period as listed by distributors), an 8192-cycle refresh scheme per 64 ms, and operation over a commercial 0C to +85C temperature range. The B-die wafer is well known in the enthusiast memory community for its strong overclocking headroom and tight timing capability, which is why modules built from B-die are prized for low-latency tuning.
Technically, the device implements the DDR4 bank-group architecture with 16 banks arranged in 4 bank groups, on-die termination (ODT), data mask (DM) support on the x8 organization, and a 1.2V SSTL12 interface. Internal accesses are pipelined through the memory array while column address strobe latency is programmed via the mode register set (MRS), enabling the memory controller to optimize bus efficiency.
Typical applications include desktop and server DIMM modules, embedded industrial controllers, networking equipment line cards, and set-top or display platforms where 1 GB per chip of main memory is required. Its 1.2V operation also suits power-sensitive designs migrating from DDR3L.
When designing with this device, ensure the memory controller supports DDR4 bank groups and 8192-cycle refresh, and follow Samsung layout guidance for length-matched fly-by address/command routing and VTT termination.
This page consolidates distributor stock data, drop-in alternatives, and practical design notes not found in the Samsung datasheet itself.
Bộ thay thế dễ dàng lắp đặt cho K4A8G085WB-BCRC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Công cụ so sánh nhanh — Chọn các bộ phận thay thế để so sánh song song:
K4A8G085WB-BCPB
✓ Còn hàng
$13.7813 / Đơn vị
Xem tài liệu →K4A8G085WB-BITD
Liên hệ để biết giá
Xem tài liệu →K4A8G085WC-BIWE
Liên hệ để biết giá
Xem tài liệu →K4A8G085WB
Liên hệ để biết giá
Xem tài liệu →K4A8G085WG-BCWE
📋 Tham chiếu thay thế (không có trong danh mục)
K4A8G085WB-BCRC Tỷ lệ tối đa & tính chất điện
| Kiểu bộ nhớ | DDR4 SDRAM (B-die) |
| Density | 8 Gbit |
| Tổ chức | 1G x 8 |
| Tốc độ dữ liệu | 2400 Mbps (DDR4-2400) |
| Điện áp cung cấp | 1.2 V |
| Clock Cycle Time | 0.175 ns (per distributor listing) |
| Refresh Cycles | 8192 |
| Giao diện | SSTL12 |
| Nhiệt độ hoạt động | 0C to +85C |
| Hộp | 78-ball FBGA (PBGA78), 9 x 11 mm, 0.8 mm pitch |
| Kiểu lắp đặt | Surface Mount |
| Termination | On-Die Termination (ODT) |
| Bank Architecture | DDR4 bank-group architecture |
| Data Mask | DM supported (x8 organization) |
Hướng dẫn cấu hình chân K4A8G085WB-BCRC 78-ball fbga (pbga78), 9 x 11 mm, 0.8 mm pitch
Cấu hình chân cho K4A8G085WB-BCRC (78-ball fbga (pbga78), 9 x 11 mm, 0.8 mm pitch gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho K4A8G085WB-BCRC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
K4A8G085WB-BCRC phù hợp cho 6 Áp dụngs: Desktop and Server DIMM Modules, Embedded Industrial Controllers, Networking Equipment Line Cards, Set-Top Boxes and Smart Display Platforms, Test and Measurement Instrumentation, Automotive-Adjacent Infotainment Development.
Desktop and Server DIMM Modules
The K4A8G085WB-BCRC is a primary component for unbuffered and registered DIMM construction. Its 8Gb B-die density allows a single-rank 8 GB UDIMM using only eight x8 chips, reducing component count versus 4Gb alternatives, while the DDR4-2400 speed bin matches mainstream server and desktop memory-controller defaults. The x8 organization supports ECC topologies where a ninth chip supplies check bits across a 72-bit bus, and the 8192-cycle refresh aligns with standard DDR4 controller timing. Because the 1.2V SSTL12 interface consumes roughly 25% less power than DDR3, high-population server platforms gain meaningful thermal headroom. B-die silicon also provides tuning margin for performance modules.
Được đề xuất
Embedded Industrial Controllers
Industrial PCs, PLCs, and machine-vision controllers use the K4A8G085WB-BCRC as main memory where 1 GB per chip suffices for frame buffers and application workloads. The 78-ball FBGA in 9 x 11 mm suits compact solder-down designs on carrier boards, and the 0C to +85C commercial range covers controlled cabinet environments; for wider ambients, the K4A8G085WB-BITD industrial variant drops into the same footprint. Its DDR4-2400 bandwidth feeds multi-gigabit Ethernet and image pipelines without becoming the bottleneck, while the 1.2V rail simplifies power trees derived from 24 V industrial supplies through a single buck stage followed by VTT termination.
Được đề xuất
Networking Equipment Line Cards
Switch, router, and gateway line cards rely on the K4A8G085WB-BCRC for packet buffering and control-plane memory. The DDR4 bank-group architecture sustains interleaved read/write streams typical of packet forwarding, and 2400 Mbps per pin provides multi-GB/s aggregate bandwidth for lookup tables and queue descriptors. The x8 organization allows flexible 64-bit or 72-bit ECC bus widths, and the 78-ball FBGA supports dense two-sided PCB placement beside the network processor. Samsung's DDR4 platform documentation highlights improved bandwidth and reliability at lower energy, which directly benefits always-on telecom hardware with strict thermal budgets.
Được đề xuất
Set-Top Boxes and Smart Display Platforms
Broadcast and display SoCs frequently validate Samsung DDR4 1G x 8 B-die components such as the K4A8G085WB-BCRC in their reference designs. One chip supplies 1 GB, enough for 4K video buffering and application memory in cost-optimized set-top and digital-signage hardware, and multiple chips scale to 2-4 GB. The 1.2V interface reduces standby and playback power versus DDR3L predecessors, extending compliance headroom for energy regulations. Because solder-down FBGA placement avoids SO-DIMM connectors, overall BOM cost drops, and the same footprint accommodates speed-bin variants like the BCPB for supply-chain flexibility across production lots.
Được đề xuất
Test and Measurement Instrumentation
Oscilloscopes, logic analyzers, and signal generators use DDR4 DRAM like the K4A8G085WB-BCRC for deep waveform capture memory, where sustained write bandwidth determines maximum sample streaming rates. The DDR4-2400 bus provides predictable sequential throughput for memory-controller DMA engines, and the 8Gb density per chip enables multi-gigabyte capture depths by paralleling devices across x8 slices. B-die silicon is noted for tight timing distribution, which helps capture-memory subsystems meet calibration margins. The commercial 0C to +85C range suits benchtop environments; use the BITD variant in portable field instruments exposed to wider temperatures.
Được đề xuất
Automotive-Adjacent Infotainment Development
While the -BCRC commercial grade is not AEC-Q100 qualified and must not ship in automotive safety paths, it is widely used in development platforms, aftermarket infotainment, and non-safety display modules where DDR4 main memory of 1-4 GB is required. Its DDR4-2400 bandwidth supports navigation rendering and media decode pipelines, and the 78-ball FBGA layout matches common SoC reference designs from display and cockpit processor vendors. Teams migrating such designs into certified vehicle programs should plan a footprint-compatible transition path and requalification, verifying temperature grades and memory-controller timing against the target grade before release.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho K4A8G085WB-BCRC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | K4A8G085WB-BCPB | K4A8G085WB-BITD | K4A8G085WC-BIWE | K4A8G085WG-BCWE |
|---|---|---|---|---|---|
| Package | 78-ball FBGA (PBGA78) | 78-ball FBGA - same | 78-ball FBGA - same | 78-ball FBGA - same | 78-ball FBGA - same |
| Brand | Samsung Electronics | Samsung Electronics | Samsung Electronics | Samsung Electronics | Samsung Electronics |
| Density / Organization | 8 Gbit, 1G x 8 | 8 Gbit, 1G x 8 | 8 Gbit, 1G x 8 | 8 Gbit, 1G x 8 | 8 Gbit, 1G x 8 |
| Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Operating Temperature | 0C to +85C (commercial) | 0C to +85C (commercial) | Industrial grade (wider range) | Industrial grade (wider range) | 0C to +85C (commercial) |
| Refresh Cycles | 8192 | 8192 | 8192 | 8192 | 8192 |
Bảo phân biệt quan trọng
- B-die silicon with strong timing headroom (vsK4A8G085WC-BIWE)
- Cost-optimized commercial grade (vsK4A8G085WB-BITD)
- Identical footprint to full speed-bin family (vsK4A8G085WG-BCWE)
Ghi chú thiết kế
Route DDR4 address/command lines in a fly-by topology with length-matched traces per Samsung's DDR4 design guide, terminating at VTT (0.6V) near the last DRAM on the bus. For the x8 organization, keep DQ/DQS/DM length matching within the controller vendor's specified window (typically a few millimeters per 100 mm of trace) and reference these signals to a solid ground plane to preserve the SSTL12 eye at 2400 Mbps.
The 1.2V VDD rail and the VTT termination rail should be generated from separate regulators or one controller with a VTT LDO, since VTT sources and sinks current during bus transitions. Decouple each FBGA with the datasheet-recommended bulk and 0.1 uF ceramic caps placed within a few millimeters of VDD/VDDQ balls. Estimated: a single 8Gb chip at DDR4-2400 draws on the order of a few hundred milliwatts active, so plan the 1.2V converter budget per chip count.
Confirm the memory controller supports DDR4 bank-group architecture and 8192-cycle refresh before substituting bins - the BCPB/BITD suffixes change timing and temperature codes, not the pinout. Do not mix commercial BCRC parts with industrial BITD parts on the same bus without revalidating read margins across temperature. Also, never attempt to cross DDR3 designs with this DDR4 part; the SSTL12 interface and DDR4 protocol are incompatible with DDR3 controllers despite similar footprints.
Thông tin tuân thủ
Verified web data does not include explicit RoHS/REACH declarations for this exact suffix. Commercial-grade part (0C to +85C); not an automotive AEC-Q100 offering. Obtain formal declarations from Samsung or your distributor for the purchased date code.
