onsemi

LM2902VDTBR2G - Quad 3-26V Low-Power Op Amp | onsemi

MPN: LM2902VDTBR2G ✓ Hoạt động
3 V to 26 V Vdss 14-TSSOP Package
MOQ: 1 |

LM2902VDTBR2G Tóm tắt

The onsemi LM2902VDTBR2G is a quad general-purpose operational amplifier IC with four amplifier circuits in a 14-TSSOP package. It is specified for single-supply operation from 3 V to 26 V and is described as a low-power, extended-temperature device. The LM2902 family provides true differential inputs and is based on the established LM324-style quad operational-amplifier architecture, making it useful for general analog signal conditioning where a low-cost, widely understood amplifier is needed.

An operational amplifier is an analog building block that compares an inverting input with a non-inverting input and amplifies the difference between them. A quad operational amplifier combines four amplifiers in one package, allowing a circuit to use multiple gain, filtering, buffering, or comparison stages while reducing board area and external component count. The LM2902VDTBR2G is therefore positioned between discrete transistor amplifiers and more specialized precision amplifier families.

The principal device characteristics are its four-amplifier configuration, 3 V to 26 V supply range, low-power operation, and 14-TSSOP surface-mount package. The TSSOP package is compact but requires careful PCB layout and adequate soldering-profile control. The extended-temperature characterization makes the part suitable for industrial and embedded equipment where ambient conditions may exceed ordinary consumer-commercial limits, subject to the final operating-temperature limits in the manufacturer datasheet.

Typical applications include sensor-signal conditioning, low-frequency active filters, audio preamplification, current-voltage conversion, general-purpose instrumentation, and process-control interfaces. The four amplifiers can implement cascaded stages, independent channels, or mixed signal-conditioning functions in one circuit board. The manufacturer datasheet should be consulted for input common-mode range, output swing, input bias current, noise, slew rate, supply-current behavior, and stability requirements before finalizing a design.

For single-supply designs, bias the signal path around a suitable reference voltage and verify that the input and output operating points remain inside the amplifier's common-mode and output-swing limits. Decoupling capacitors should be placed close to the supply pins, and the unused amplifier sections should be configured according to the datasheet's recommended method. This page summarizes the cataloged LM2902VDTBR2G identity and combines it with practical design guidance, alternative-part screening, and sourcing guidance.

Bộ thay thế dễ dàng lắp đặt cho LM2902VDTBR2G — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM2902VDTBR2G (cùng hình factor và footprint) — khác nhau ở Product Type.

onsemi
Product Type: Quad operational amplifier
So sánh với LM2902VDTBR2G →

LM2902DTBR2G

✅ Drop-In ⚠️ Thông số chưa được xác minh
onsemi
📦 14-TSSOP
General-purpose operational amplifier · 4 circuits · 1 MHz · 0.6 V/µs · 3 V · 32 V · 3 V to 26 V · True differential inputs

Liên hệ để biết giá

Xem tài liệu →

LM2902DTB

✅ Drop-In ⚠️ Thông số chưa được xác minh
onsemi
📦 14-TSSOP
Quad operational amplifier · onsemi · 3 V to 26 V · 4 circuits · 14-TSSOP · Surface mount · 1.2 MHz · 2 mV

Liên hệ để biết giá

Xem tài liệu →

LM2902DT

✅ Drop-In ⚠️ Thông số chưa được xác minh
STMicroelectronics
📦 14-TSSOP
Quad (4 independent op-amps) · General purpose, bipolar · 1.3 MHz · 0.4 V/us · 3 V to 30 V · +/-1.5 V to +/-15 V · 2 mV (max) · 20 nA

Liên hệ để biết giá

Xem tài liệu →

LM2902VDTBR2G Tỷ lệ tối đa & tính chất điện

Product Type Quad general-purpose operational amplifier
Number of Amplifier Circuits 4 circuits
Supply Voltage Range 3 V to 26 V
Power Class Low-power
Operating Temperature Class Extended temperature
Input Type True differential inputs
Hộp 14-TSSOP
Package Type Thin small-outline package
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân LM2902VDTBR2G thin small-outline package

Cấu hình chân cho LM2902VDTBR2G (thin small-outline package gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân thin small-outline package cho LM2902VDTBR2G

Không có dữ liệu chân cụ thể sẵn có cho LM2902VDTBR2G.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

LM2902VDTBR2G phù hợp cho 6 Áp dụngs: Industrial Sensor Signal Conditioning, Audio Preamplification, Current-to-Voltage Conversion, Active Low-Frequency Filters, Process-Control Interfaces, Portable and Battery-Powered Electronics.

🏭

Industrial Sensor Signal Conditioning

The LM2902VDTBR2G is suitable for conditioning weak sensor signals in industrial equipment because its four amplifier sections provide multiple gain, filtering, and comparison stages in one 14-TSSOP package. The confirmed 3 V to 26 V single-supply range supports operation from low-voltage sensor rails through higher industrial rails, while the extended-temperature characterization supports demanding ambient environments. Design the front end around the sensor output level, verify the input common-mode range, and use one section for amplification before active filtering. Keep the high-impedance input path short and place filtering capacitors close to the amplifier pins. The low-power nature of the LM2902 family is valuable when four channels are continuously active, but the complete bias-current, offset, bandwidth, and noise limits must be taken from the onsemi datasheet before setting the gain.

🎧

Audio Preamplification

The LM2902VDTBR2G can implement preamplifier and filtering stages for line-level audio because it combines four general-purpose amplifiers in a compact surface-mount package. Its 3 V to 26 V supply capability allows operation from low-voltage portable systems to higher-voltage analog rails, subject to the exact device limits. Use separate sections for input gain, tone control, anti-alias filtering, and output buffering. In a single-supply design, establish the audio signal midpoint carefully so that the waveform does not approach the input common-mode or output-swing boundaries. The low-power LM2902 architecture is also appropriate for continuously powered equipment, but audio-path noise and distortion requirements should be checked against the datasheet rather than inferred from the general-purpose classification.

⚡

Current-to-Voltage Conversion

The LM2902VDTBR2G fits current-to-voltage conversion and transducer monitoring circuits where four amplifier channels can reduce the number of separate packages. A transimpedance configuration can convert sensor or shunt current into a voltage, while additional sections can amplify, offset, filter, and drive the result. The 3 V minimum supply supports low-voltage systems, while the 26 V upper catalog rating provides flexibility for industrial interfaces. When working with very small shunt currents, verify input bias current and offset voltage because they can create measurement errors. Keep the feedback resistor and input capacitance arrangement compact, provide stable reference connections for offsetting, and confirm output headroom across the full process-current range before committing the circuit to production.

🔧

Active Low-Frequency Filters

The LM2902VDTBR2G is well suited to first-order and higher-order active filters built from general-purpose amplifiers. Four independent sections allow a filter stage, buffer, gain stage, and output conditioning circuit to be consolidated in one 14-TSSOP package. Its low-power operation helps control heating in continuously active analog equipment, and the 3 V to 26 V supply range covers common single-supply architectures. Select resistor and capacitor values using the datasheet's small-signal and gain-bandwidth characteristics, then verify phase margin and load stability. Place feedback parts close to their associated amplifier pins and keep the unused amplifier sections in the manufacturer's recommended stable configuration. This approach is especially useful for removing sensor noise, reconstructing slow industrial signals, and shaping control-loop bandwidth.

🏭

Process-Control Interfaces

The LM2902VDTBR2G can support process-control interface circuitry that compares sensor signals, drives control inputs, and provides intermediate amplification. The extended-temperature characterization is useful in industrial cabinets and machinery where ambient temperature varies, and the compact 14-TSSOP package reduces PCB area in multi-loop controllers. Four channels can serve separate sensor inputs or distributed control functions. For a comparator-based design, confirm output saturation, input offset, and propagation behavior under the intended supply and loading. For analog control outputs, verify output swing and load-current capability. Add supply bypassing at each supply pin, use a defined reference node, and isolate high-impedance sensor wiring from switching nodes to prevent errors in the control loop.

📱

Portable and Battery-Powered Electronics

The LM2902VDTBR2G is appropriate for portable and battery-powered analog modules because it provides four amplifiers while operating from a single supply as low as 3 V and is identified as a low-power device. This allows sensor interfaces, wake-up comparators, and small measurement chains to share one package. The extended-temperature option can support environments beyond typical consumer room temperature. Battery designs should still calculate average and peak supply current from the four channels, disable unused sections where the datasheet permits, and account for the load behavior of the output stages. Confirm the regulator headroom and allowable ripple at the amplifier pins, especially when the battery system also drives radio or digital circuitry.

What is the operating voltage of LM2902VDTBR2G?
The LM2902VDTBR2G operates from 3 V to 26 V as a single-supply quad operational amplifier. According to the onsemi LM2902 device information, the LM2902 family is designed for low-power single-supply operation and provides four amplifier sections in one package. The exact recommended supply limits, input range, and output swing should still be checked against the manufacturer datasheet for the specific ordering suffix before the circuit is released.
What is the LM2902VDTBR2G package?
The LM2902VDTBR2G is packaged in a 14-TSSOP surface-mount package. Catalog information identifies the device as a four-circuit amplifier in 14-TSSOP. TSSOP packages are compact and require a PCB footprint with closely spaced leads, adequate solder-mask and paste design, and a controlled reflow profile. Use the manufacturer pin-description table when assigning signal, supply, and ground connections.
What is the output current rating of LM2902VDTBR2G?
The LM2902VDTBR2G is primarily a voltage amplifier, and its usable output-current capability depends on load, supply voltage, output swing, temperature, and the device's output-stage limits. The catalog information confirms a low-power general-purpose quad op amp, but it does not state a single output-current specification. Review the output-current and load-capacitance limits in the onsemi datasheet before driving a load or external buffer.
Is LM2902VDTBR2G suitable for single-supply operation?
Yes, LM2902VDTBR2G is suitable for single-supply operation because the LM2902 family is specified for low-power single-supply configurations from 3 V to 26 V. In a unipolar signal system, establish a mid-supply reference for the non-inverting input or use a suitable bias network. Confirm that the selected input and output levels remain within the device's common-mode and output-swing limits.
What is the difference between LM2902VDTBR2G and LM324?
The LM2902VDTBR2G is an onsemi LM2902-family quad amplifier, while LM324 is a closely related general-purpose quad-amplifier family. The verified LM2902 catalog information identifies single-supply operation, true differential inputs, low power, and an extended-temperature version. The LM324 family also includes high-voltage versions, but exact replacement suitability depends on the package, temperature grade, supply limits, and pinout of the specific comparison part.
What is the best drop-in replacement for LM2902VDTBR2G?
The best drop-in replacement is the onsemi LM2902 variant that uses the same 14-TSSOP footprint and preserves the LM2902 electrical function. LM2902DTBR2G is the closest same-family ordering variant identified for the 14-TSSOP configuration. Confirm pin assignment, supply range, temperature grade, and electrical limits in the manufacturer datasheet before treating any substitute as a drop-in replacement.
Can LM2902VDTBR2G replace an LM324 in a 14-TSSOP design?
LM2902VDTBR2G can be considered for an LM324-based design when the original device is also in a compatible 14-TSSOP footprint and the required supply, common-mode, output-swing, and temperature specifications are met. The LM2902 family is related to the LM324 architecture, but package and suffix differences can change electrical limits. Verify every pin and the worst-case operating conditions in the relevant datasheets.
Where can I download the LM2902VDTBR2G datasheet PDF?
The LM2902VDTBR2G datasheet PDF is available through the onsemi device documentation linked from the catalog references, with the accessible PDF mirror listed in the datasheet sources on this page. The document is identified as the LM2902 single-supply quad operational-amplifier datasheet and is 17 pages in the listed copy. For controlled revisions and errata, use the onsemi product documentation.
Where can I find the LM2902VDTBR2G pinout?
The LM2902VDTBR2G pinout is defined by the 14-TSSOP pin-description table in the onsemi LM2902 datasheet. The cataloged package is 14-TSSOP, but the individual pin names are not reproduced in the product listing. Use the manufacturer drawing and package footprint together, then verify continuity between the schematic net names and the physical pin numbers before fabrication.
Where can I buy LM2902VDTBR2G online?
Use the Request a Quote form on this page to request LM2902VDTBR2G availability, packaging, and order lead time. The device is cataloged by onsemi in a 14-TSSOP package, and multiple distributor listings are identified, but live stock, quantity breaks, and current delivery timing should be confirmed through the quote process. The form allows buyers to request the exact MPN without relying on an outdated price or inventory listing.
What is the price of LM2902VDTBR2G?
The current price of LM2902VDTBR2G should be requested through the Request a Quote form on this page. The product is identified as an onsemi 14-TSSOP quad operational amplifier, but the available catalog references do not provide a complete quantity-break table with an exact MPN and explicit quantities for extraction. A quote request gives you current pricing, stock, and packaging information for the required order quantity.
What is the lead time for LM2902VDTBR2G?
Lead time for LM2902VDTBR2G is best confirmed through the Request a Quote form on this page. The catalog data identifies the part and its onsemi 14-TSSOP configuration, but it does not state a guaranteed factory or distributor lead time. Include your required quantity, target date, packaging preference, and approved source requirements when submitting the request.
Is LM2902VDTBR2G in stock?
LM2902VDTBR2G is identified in catalog listings as an available onsemi component, but the listings do not provide a reliable quantity-level stock count for your order. Use the Request a Quote form on this page to obtain current stock status, break quantities, and lead time for the exact 14-TSSOP ordering code. This avoids treating a general product-page availability statement as a guaranteed allocation.
What are the key specifications of LM2902VDTBR2G that engineers should know?
The key LM2902VDTBR2G specifications are four general-purpose amplifier circuits, single-supply operation from 3 V to 26 V, low-power operation, true differential inputs, extended-temperature characterization, and a 14-TSSOP package. These points place it in the general-purpose precision-plus class of amplifier ICs. Input bias current, offset voltage, bandwidth, slew rate, noise, common-mode range, and output swing should be taken directly from the onsemi datasheet.
What can replace LM2902VDTBR2G?
LM2902DTBR2G is the closest same-brand, same-family drop-in candidate because it is associated with the 14-TSSOP LM2902 configuration and preserves the quad general-purpose amplifier function. Cross-brand substitutes require a verified 14-TSSOP pinout and comparable electrical ratings; generic LM324-family equivalents cannot be assumed to be drop-in without checking package, supply, common-mode, output-swing, and temperature requirements.
Is LM2902VDTBR2G the same as LM2902DTBR2G?
LM2902VDTBR2G and LM2902DTBR2G are closely related onsemi LM2902-family quad op-amp ordering variants, and LM2902DTBR2G is the leading same-package drop-in candidate. The exact suffix codes can encode temperature, qualification, or packaging differences, so they should not be treated as identical without comparing the manufacturer ordering table. Verify the 14-TSSOP pinout, temperature grade, and lifecycle status for the exact replacement.
What onsemi equivalent is suitable for LM2902VDTBR2G?
The onsemi LM2902DTBR2G is the most relevant onsemi equivalent because it is a same-family LM2902 quad operational amplifier associated with the 14-TSSOP format. For a direct substitution, verify that both devices have the same 14-pin footprint, pin functions, supply range, input common-mode behavior, output swing, and temperature grade. If those conditions do not match, the part is only a functional alternative and requires layout or circuit changes.

Dữ liệu tham khảo kỹ thuật cho LM2902VDTBR2G — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose LM2902VDTBR2G when the design needs four general-purpose amplifiers in one 14-TSSOP package, single-supply operation, and an extended-temperature option. It is well suited to industrial sensor conditioning, active filters, audio preamplification, and compact multi-stage interfaces. Select LM2902DTBR2G when its ordering-table temperature and qualification codes satisfy the target requirements; it is the closest same-family drop-in candidate. Consider LM2902DTB or LM2902DT only after confirming their exact suffix ratings and active status. These alternatives preserve the LM2902 architecture and footprint, but suffix-level differences can affect temperature grade or qualification. If an application requires lower offset, lower noise, faster slew, rail-to-rail output, or precision RRIO performance, move to a dedicated amplifier family rather than assuming the general-purpose LM2902 is adequate.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LM2902DTBR2G LM2902DTB LM2902DT
Brand onsemi onsemi onsemi onsemi
Package 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP
Amplifier Count 4 circuits 4 circuits 4 circuits 4 circuits
Input Type True differential inputs True differential inputs True differential inputs True differential inputs
Product Class General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier
Mounting Type Surface mount Surface mount Surface mount Surface mount

Bảo phân biệt quan trọng

  • Four amplifiers in one compact package (vsSingle-amplifier alternatives such as TS951IDT)
  • Single-supply operating range (vsLM2902DTB)
  • 14-TSSOP board-space efficiency (vsLM2902DTBR2G)

Ghi chú thiết kế

Place the input, output, feedback, and bypass components directly beside their associated LM2902VDTBR2G pins. The 14-TSSOP lead pitch makes short electrical loops especially important, particularly around high-gain stages. Route the non-inverting reference and inverting feedback nets away from supply switching nodes and high-impedance sensor traces. A solid ground plane and short return path improve repeatability and reduce susceptibility to common-mode interference.

Decouple each supply connection locally with suitable high-frequency and bulk capacitance, following the capacitance recommendations in the onsemi datasheet. Keep the ceramic bypass capacitor adjacent to the supply pins and provide additional bulk capacitance near the regulator output when the wiring between the regulator and amplifier is long. Verify startup, supply ripple, and output settling across the complete 3 V to 26 V design range.

Do not assume that all LM2902 and LM324 variants are interchangeable. Check the package, pin assignment, supply limits, input common-mode range, output swing, output-current capability, noise, offset, and temperature grade before substituting a part. For single-supply operation, bias the signal around the midpoint and test the largest expected input and output excursions. Configure unused amplifier channels according to the manufacturer's recommended stable connection.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance attributes require confirmation from the current onsemi product documentation and material declaration for the exact ordering code.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

LM2902VDTBR2G datasheet LM2902VDTBR2G datasheet pdf LM2902VDTBR2G pinout LM2902VDTBR2G equivalent LM2902VDTBR2G replacement LM2902VDTBR2G 14-TSSOP onsemi LM2902VDTBR2G LM2902VDTBR2G 3V 26V LM2902VDTBR2G price LM2902VDTBR2G stock LM2902VDTBR2G sensor signal conditioning LM2902VDTBR2G vs LM2902DTBR2G

Các bộ phận và thuật ngữ liên quan

onsemi LM2902VDTBR2G LM2902DTBR2G LM2902DTB LM2902DT LM2902 LM324 quad operational amplifier general-purpose amplifier analog amplifier IC single-supply operation true differential input low-power amplifier 14-TSSOP surface-mount package industrial sensor conditioning active filter audio preamplifier current-to-voltage conversion process control battery-powered electronics common-mode voltage output swing input bias current extended temperature
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ